Related
I've got one of these STM Grip cases for my iPad and it's by far the best case I've owned for a tablet. It's super slim, gives really good protection (iPad dropped without damage), has a rear kick stand and is clip-in style so obscures nothing of the glass. I've now also bought a Note 10.1 and have searched and searched everywhere to find a similar style of case for the Note but can't find anything. The most important factors for me are a clip-in style and a rear kickstand.
I can't stand the rotating (or non-rotating) type with front kickstands because they always fall over when set a low angle, and I've owned a few of them, some expensive. The STM Grip isn't cheap but does everything well whilst adding very little bulk.
I've bought one of these cases from Amazon and which does half the job because it has a superb and very stable adjustable rear kickstand but is a slip-in style so the leather case edges obscure a chunk of the front glass.
Any help finding an STM Grip-style case for the Note is very much appreciated :good:
I'd like to see one of these too, I'm using the "Roocase" that is similar to the second image and it makes interacting with the corners of the screen awkward if not using the stylus...
Ashton_Durkhun said:
it makes interacting with the corners of the screen awkward if not using the stylus...
Click to expand...
Click to collapse
Thats exactly my issue. It's not ideal at all. I'm pretty sure that (amazingly) there isn't such a case for the Note so I'm going to make a hybrid by taking a clip-in hard plastic tray from one case, removing the leather sleeve (but keep the back board) from the kickstand case then bonding the tray to the back board of kickstand case. Won't quite be the STM Grip but it should give me a good solid rear kickstand and full access to the screen.
Will post up some pics if I manage to get it done.........
Just want to know from you guys experience.
Who makes the best cases/covers/shells for samsung?
And if any of you are using cases/shells/covers, which are you using? Would you recomend?
What are your experiences?
I'm not really a fan of the flipcases
Thanks
If you are on a high budget, you could look at the Impact-absorbing Tech21 cases.
Those are of high build quality.
I recently got a casemate tough case for my sgs4 mini and I am very pleased with it, both handling-wise and in terms of general ruggedness.
Did anyone get a screen protector? I loved the exim ultraprotect on my old nokia, but the s4 mini is my first phone with a capacitive touch screen and I am unsure if a screen protector will hurt its responsiveness.
I got a screen protector applied the moment I unpackaged my phone at the shop. They applied a Screenguard branded clear (non-matte) screen protector and responsiveness hasn't been an issue in the 4 weeks I've had the phone.
This screen protector ($4) is a fingerprint magnet though, but it has perfect cut-outs for the light, proximity sensors and front - facing camera as well as the home button.
Case
I just bought a Belkin case named "Grip Sheer Matte" in a blackish-brownish transparent tone for the black S4m (ha! SAM!).
It was 12€ in an electronics store here in .de but you can probably get it cheaper online (see link).
I like the soft and smooth feel. The case fits quite good and protects the back and all edges. The ports and buttons are accessible and the holes on the back for camera and speaker are in the right places.
Cheers,
CS
I bought the original Samsung Flip Cover with view... I think its the best but it was not cheap.
Just got a Samsung Flip Cover without view (which replaces the back cover). After using a ROCK flip case, a MERCURY Fancy Diary flip case and a simple metallic-red non-flip case, the Samsung Flip Cover seems to do its job best. The cover is heavy enough to hold itself down when the phone is facing up, and folds behind nicely such that it is comfortable to hold.
What's the point of having such a small metal bumper? In case of a drop it won't absorb any energy ...
Its probably to protect the original metal rim against scratches and bumps. Good for maintaining the resale value! (The screen protector will protect the front, and the back cover is replaceable)
damn.. i want those pretty and sturdy cases from otterbox, uag, spigen etc
Does the S-View cover also protect the edges?
After almost 2 months I notice that I already have a couple of bumps right on the edge of the screen. I don't want to buy a thick shell since I bought the Mini exactly because of the sleaziness and the S-view looks quite nice..
charliebigpot said:
Does the S-View cover also protect the edges?
After almost 2 months I notice that I already have a couple of bumps right on the edge of the screen. I don't want to buy a thick shell since I bought the Mini exactly because of the sleaziness and the S-view looks quite nice..
Click to expand...
Click to collapse
No. The S-View cover replaces your back cover of the phone. Thus it only protects the back. The sides are exposed except for the left side of the phone where the cover flips over the phone.
Whosat said:
No. The S-View cover replaces your back cover of the phone. Thus it only protects the back. The sides are exposed except for the left side of the phone where the cover flips over the phone.
Click to expand...
Click to collapse
For me the ideal would be a bumper, so that the edges are protected and I'm not carrying around a brick. I'll keep on duckduckgoing and see what I can find..
I've been looking for a decent rubber bumper as well. I've only seen a metal one with a weird branding on the side. Do post here if you manage to find one!
Whosat said:
I've been looking for a decent rubber bumper as well. I've only seen a metal one with a weird branding on the side. Do post here if you manage to find one!
Click to expand...
Click to collapse
I found this one here, http://www.mobilefun.com/40209-flexiframe-samsung-galaxy-s4-mini-bumper-case---black-clear.htm but I might actually get an official samsung case, it looks quite nice: http://www.samsung.com/se/consumer/mobil/mobil/mobiltillbehor/EF-PI919BNEGWW-gallery?subsubtype=bags
make onuond
Will a rubber bumper protect against a drop (say, from table height)? Will the S-view cover protect against a drop?
I wouldn't be bothered by scratch or bumps on the plastic housing. Mainly looking for protection against the screen/digitizer/glass breaking from a fall.
I bought this one.
Fits tightly around the S4 mini and does not add any bulk. The phone still looks very slim and small. Material is of good scratch resistance but probably not a real bumper. It's slightly transparent, so the Samsung logo and the silver pattern of the back cover shines through a bit. Really looks good.
charliebigpot said:
I found this one here, http://www.mobilefun.com/40209-flexiframe-samsung-galaxy-s4-mini-bumper-case---black-clear.htm but I might actually get an official samsung case, it looks quite nice: http://www.samsung.com/se/consumer/mobil/mobil/mobiltillbehor/EF-PI919BNEGWW-gallery?subsubtype=bags
Click to expand...
Click to collapse
I ordered this one:
http://goo.gl/KusTUO
It kind a looks like the "Flexiframe" from mobilefun and for the price you can't go wrong.
axelpix said:
I bought this one.
Fits tightly around the S4 mini and does not add any bulk. The phone still looks very slim and small. Material is of good scratch resistance but probably not a real bumper. It's slightly transparent, so the Samsung logo and the silver pattern of the backt cover shines through a bit. Really looks good.
Click to expand...
Click to collapse
I just received the same case and it is better than expected. Took less than a week from Germany to UK and less than 10 GBP Inc postage.
This case is so small and thin that it doesn't alter the feel of the phone apart from the texture. It'sthin enough to fit in my S2 desktop charger/dock and also my windscreen mount with the case on.
I ordered the following in blue/black. It looks somewhat...different! I hope it's not too much when I put it on the phone. It came to six euros which is reasonable. I'll post my impressions when it arrives.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=171080302080&ssPageName=ADME:L:eek:C:US:3160
Wanted to share with you all, a really good case that is worth the money for this phone, and I am really happy with it.
The case is intended to put on and leave on, hence the adhesive films on the inside of the front cover, the back (with yellow cushioning) just clips on with a strong solid tight fit. The front cover bezel/lip looks to be about 2.5-3mm deep, but accessing the right side soft menu still good. My finger size is about average/medium size and I have no problem also accessing the power button and fingerprint sensor on the side beside the s-pen.
Used the glue adhesives on the front screen that were already applied, just had to pull off the backings (They also included an extra set of glue adhesive strips for a second mount if you ever need to take off and put back on) and it fits perfect, lines up with all the holes and speaker grills. The back piece with the hinge cover (with 2 spring loaded hinges), protects the back and fold hinge while the lip around the camera protects the camera lenses. It too also has perfect alignment with holes and has lots of clearance with the USB C port fitting. The hinge cover protector also gives you something to hold/grip when the phone is unfolded.
Suggest you first get a front glass screen protector (I used the Spigen Glastr Ez Fit for perfect alignment and easy application) for the front and camera lenses protectors also before applying this case.
This quality case feels very good, smooth, solid, elegant, and provides a great grippy feel. More importantly, I feel more confident holding the phone with this case on, as it feels like it could weather some accidental mishaps and protect the phone.
In my pictures, you will notice I also put a pop socket on the back centre for four reasons:
1) use for general holding in hand, even more support than the hinge cover protection bump when fully open
2) use as a kick stand for front screen and/or the unfolded full screen
3) use for a magnetic mount that I have in my car - so phone can sit in folded vertical or horizontal orientation and also unfolded orientation, using a pop socket flat mount with the metal plate stuck on the back of it- I just slide my pop socket into the pop socket flat mount holder and then attach to the magnetic mount, which also allows me to:
4) wireless charge at home, by twisting the top half of the pop socket half a turn to remove, when it is pushed in, which will allow a closer clearance for wireless charging through the case as it is all plastic
One critical point based on the design of the spring loaded hinge cover protector, when you do unfold/open the phone to full screen, and you are using the back screen for taking a selfie, you loose about 1 cm of view area on the left of the front screen. This minor con is something I can live with as this is in only this situation and for the design, it is a great compromise having that hinge protection.
In closing, I am really happy I got this case. I was originally worried that it might be too bulky, eventually ending up removing it for a thinner/smaller case, but I think it has a great balance of protection, holds the s-pen on the front side of screen keeping it's thickness down (compared to the Samsung pen/kickstand case, or others in some cases), and one of the few cases that protects the hinge, allowing the phone full protection around the whole phone. Hopefully you found this helpful for your situation.
used to have slim armour pro on my fold 3. i thought same as you and glued the front and back to the phone. i didnt removed for 2 months as theres was no need but after 2 months i wanted to clean the phone as dust clogged in corners, dam that case bonded with phone like a rock. no matter how much i pulled it wont come off lmao. i had to use some 70% alcohol and slowly pried it off. there were several scraches on the front screen border where the case was contacting the phone. also its weighs so much, i dont know why they named it as slim as it aint slim at all. but i have to say that case is like BUNKER and protected my phone from several hard falls
this time thinking of going with latercase as i rarely fold my phone unless im going outside.
eswar539 said:
used to have slim armour pro on my fold 3. i thought same as you and glued the front and back to the phone. i didnt removed for 2 months as theres was no need but after 2 months i wanted to clean the phone as dust clogged in corners, dam that case bonded with phone like a rock. no matter how much i pulled it wont come off lmao. i had to use some 70% alcohol and slowly pried it off. there were several scraches on the front screen border where the case was contacting the phone. also its weighs so much, i dont know why they named it as slim as it aint slim at all. but i have to say that case is like BUNKER and protected my phone from several hard falls
this time thinking of going with latercase as i rarely fold my phone unless im going outside.
Click to expand...
Click to collapse
I read a lot about people having a challenge to pull the case cover off on the Z fold 3, some had glued the back on also which the current 4 version doesn't have or need, as it snaps on pretty good, but some with the 3 did use the glue strips which made it a challenge to get off. I can't speak to this Z fold 4 vs the 3 case, but having used it a couple of days, I still think it is a solid quality case.
It is a "little" thicker than the Samsung pen case, but not by much, and the pen holder on the Spigen sits in a nice place compared to the Samsung making it thinner right away, even with the hinge on the back when opened up. I understand why they need the glue adhesive on the front protection cover, as it needs to stay locked on especially when you are pulling on the s-pen constantly. What I really like is that it does protect the Fold's hinge area also... the Latercase is super thin, so less protection and the hinge is susceptible when folded with mishaps and for me I use both the front and the inside about the same. I can't see me taking the front cover off for a long time and don't think I will need to clean from the inside on the front panel as the fit is super tight, but the back can be snapped off easily if necessary. There are a lot of people that have used the Latercase as it is thin and has good grip, but doesn't have the "bunker" safety. As I mentioned in my closing casual review, I was afraid the size of the case would be too much for the protection it offers, but it is a lot better than I thought it would be in terms of weight/thickness and with the hinge protection and great pen storage location, I am very happy with it.
I recommend stick for example transprant tape for hinge to protect before scratches from this case. Every unfold and fold device i saw more scratches on the tape and thanks for it no on the hinge
I did it on my fold 2 from first days and now look like new.
eswar539 said:
used to have slim armour pro on my fold 3. i thought same as you and glued the front and back to the phone. i didnt removed for 2 months as theres was no need but after 2 months i wanted to clean the phone as dust clogged in corners, dam that case bonded with phone like a rock. no matter how much i pulled it wont come off lmao. i had to use some 70% alcohol and slowly pried it off. there were several scraches on the front screen border where the case was contacting the phone. also its weighs so much, i dont know why they named it as slim as it aint slim at all. but i have to say that case is like BUNKER and protected my phone from several hard falls
this time thinking of going with latercase as i rarely fold my phone unless im going outside.
Click to expand...
Click to collapse
Had the same issue with mine. Damaged and scratched my z fold 3 due to the case adhesive.
Tried to go another route for my fold 4 and got the vrs terra guard modern case, It looked alright & initially I was happy as it had Good Protection. It felt more plasticy than the spigen version but i liked the design so ignored the finish.
Over my 4 days of use I found that the magnets in the hinge created big dead spots in the inner screen where the S-Pen wouldn't register.
Screen protector included is much smaller than the active screen area. (So basically useless)
The hinge created a weird noise while opening and closing which i ignored and it eventually broke after 4 days of use (the hinge created tension in the plastic holding it and lifted the inner base of the case and broke).
Thankfully no damage to the phone.
I'll probably try the iblason or supcase I saw on some youtube channels they looked solid and only had one small piece of adhesive tape for the top cover.
Syd91 said:
Screen protector included is much smaller than the active screen area. (So basically useless)
Click to expand...
Click to collapse
Spigen screen protector for the outer small screen is very good. Although its not edge to edge which will hinder with cases.
_GRIZZLY_ said:
I recommend stick for example transprant tape for hinge to protect before scratches from this case. Every unfold and fold device i saw more scratches on the tape and thanks for it no on the hinge
I did it on my fold 2 from first days and now look like new.
Click to expand...
Click to collapse
So far, I don't see anyone has managed this on a fold 4! The hinge film gets pushed off when you open the phone as the tolerances are much tighter than the 2 and 3
jonstatt said:
So far, I don't see anyone has managed this on a fold 4! The hinge film gets pushed off when you open the phone as the tolerances are much tighter than the 2 and 3
Click to expand...
Click to collapse
Interesting, so in this case scratches problem can be unfortunetly hard to resolve.
After over a month with the Spigen Slim Armor Pro Pen Edition case, it is holding up great. Haven't had any close ones or miss-haps to talk about, and the under the hinge protector, minor dust, which is cleaned out easily with a clean micro-fibre. The case gives me the confidence that it has that 100% protection. Very well designed with upgrades to it since the first one they offered for earlier folds, I have to say this is their best design yet. Everything just works well, the case, the EZ glass front protector, the pen holder, the camera lens cover protection, the removable pop socket with the metal stick on that works with my car magnetic mount and the ESR phone boost kickstand. As for the fold 4 itself, no issues and works well with the Watch 5 pro and Buds 2 pro. The only one thing I wish it did have is a wider front screen similar to the Mix 2/Vivo Fold, but with all the pro's, in Canada, it is the clear winner for Folds here.
For its price, its terribly expensive. There are cases just like it for 30% less money that use magnets on the hinge instead of glue, and the material feels better. I feel as though Spigen rips people off and they must have massive profit margins if you see the cases that show up on amazon and aliexpress.
What case do you recommend then?
Q-Prof said:
After over a month with the Spigen Slim Armor Pro Pen Edition case, it is holding up great. Haven't had any close ones or miss-haps to talk about, and the under the hinge protector, minor dust, which is cleaned out easily with a clean micro-fibre. The case gives me the confidence that it has that 100% protection. Very well designed with upgrades to it since the first one they offered for earlier folds, I have to say this is their best design yet. Everything just works well, the case, the EZ glass front protector, the pen holder, the camera lens cover protection, the removable pop socket with the metal stick on that works with my car magnetic mount and the ESR phone boost kickstand. As for the fold 4 itself, no issues and works well with the Watch 5 pro and Buds 2 pro. The only one thing I wish it did have is a wider front screen similar to the Mix 2/Vivo Fold, but with all the pro's, in Canada, it is the clear winner for Folds here.
Click to expand...
Click to collapse
Just got my Z FOLD 4 a couple of days ago..(used to have orginal Z FOLD.....then Xiaomi Mi MIx FOLD..now this beast..it is awesome!)....I have the Samsung case with pen holder...but interested in this Spigen one you recommend..you say it allows wireless charging with the case on ? (the Samsung one does not.....)...and looks like it gives easier access to the S pen too...but does the S pen not block the fingerprint reader ? It is kinda damm expensive too for a case ...let's hope it comes down in price in Amazon prime sale next week !
elio321 said:
Just got my Z FOLD 4 a couple of days ago..(used to have orginal Z FOLD.....then Xiaomi Mi MIx FOLD..now this beast..it is awesome!)....I have the Samsung case with pen holder...but interested in this Spigen one you recommend..you say it allows wireless charging with the case on ? (the Samsung one does not.....)...and looks like it gives easier access to the S pen too...but does the S pen not block the fingerprint reader ? It is kinda damm expensive too for a case ...let's hope it comes down in price in Amazon prime sale next week !
Click to expand...
Click to collapse
Hey Elio,
Congrats on getting the Z Fold 4,
No issues with the finger print reader, I have average sized hands and thumb works all the time, there is enough room. Yes it is expensive, but well worth it, you wont feel ripped off as it is excellent quality, and there is no other design out there that has this unique set of design features. The case feels really good in the hand (not plastic feel... more of a smooth rubbery feel, so great grip) and it fits like a glove on the case. As for charging wirelessly, no problem... I even have a removable pop socket and an ESR phone boost kickstand, and still no problem charging after I remove the top of the pop socket (just a quick 1/2 twist when it is pushed in). Not only easier access to the pen, but better placement in my opinion, I would rather have a little wider than making it thicker... it already is thick because of the fold design... so why put a storage s-pen on the back... and putting it in the hinge protector like some designs makes the hinge protector a huge bump on the back when open.
I have very negative experience with the Spigen cover cases for Fold 4. The first one, the Tough Armor got broken after 16 days. The second one, the Slim Armor Pro got broken today after 4 months. Totally, I lost almost 150€ for these two cases ;-( I will request replacement. My conclusion is there is no way to make a good unbreakable cover case for Fold 4. For my previous non-foldable phones the Spigen cover cases where perfect.
My Latercase finally arrived today.
Feels really nice in the hand a la Aramid case that I had with the ZF3. Thinner than the OEM "Thin Case w/Kickstand". I am debating buying one of those stick-on kickstands from Amazon because it is nice to have an instant kickstand every once in awhile, without the added thickness.
Because it's a "Cyber edition", it wobbles on a table. Probably doesn't bother me because I don't use the ZF4 sitting flat like that.
Looks good.
@mickliq can you please share some photos of inside? Weather it has raised edges to protect the screen or not? The below one i got from ebay and its flawed at corners and does not have raised edges
They're totally flush. Not sure these are the best pics but gives you an idea.
Added ESR kickstand. In this position, it can still wirelessly charge. Not perfect but decent compromise.
FYI - I've been very happy with this ultra-thin kickstand that I added to mine, much thinner than anything else I've seen. This is on mounted on the Spigen Slim Armor Pro case. And wireless charging still works just fine.
https://www.amazon.com/dp/B0B1JL6D2Z
eswar539 said:
@mickliq can you please share some photos of inside? Weather it has raised edges to protect the screen or not? The below one i got from ebay and its flawed at corners and does not have raised edges
Click to expand...
Click to collapse
On mine, the right side that covers the back with the camera does come up creating a lip, but just ever so slightly. The other side is quite flush. Having that lip isnt something you'd expect from a thin fitting case anyway.
On the front screen though, there's definitely a lip that will keep your screen off the table. For the inside, Samsung already has that built into the phone, so for the most part, its safe to open the fold and put it face down, but... i just wouldnt...
Version w/ S-Pen Holder:
https://www.amazon.com/CaseBorne-Compatible-Samsung-Galaxy-Fold/dp/B0B86Q1H41/ref=sr_1_2?keywords=caseborne%2Bz%2Bfold%2B4&qid=1670817376&sr=8-2&ufe=app_do%3Aamzn1.fos.006c50ae-5d4c-4777-9bc0-4513d670b6bc&th=1
Version w/o S-Pen Holder:
https://www.amazon.com/CaseBorne-Compatible-Samsung-Galaxy-Fold/dp/B0B86NMFSH/ref=sr_1_3?keywords=caseborne%2Bz%2Bfold%2B4&qid=1670817629&sr=8-3&ufe=app_do%3Aamzn1.fos.006c50ae-5d4c-4777-9bc0-4513d670b6bc
I love my Galaxy Z Fold 4, but was disappointed once I found out that there are not many cases available for it. And the ones that are typically suck. I tried cases from Spigen, VRS Designs, SUPcase, Zagg and multiple others from Amazon. EVERY SINGLE ONE was terrible quality. The hinge protectors were clunky and poorly designed. These other cases HEAVILY relied on the adhesive strips to hold the flimsy case onto the phone. Several of the rugged cases included built-in screen protectors, which were terrible. I dreamt of a case that would provide 360 degree protection, a sturdy kickstand, a practical S-Pen holder and the ability to use a tempered glass screen protector. When I thought all hope was lost, CaseBorne provided my dream case.
The Vanguard Series Z Fold 4 case by CaseBorne is INCREDIBLE. Before I go any further, this case is a tank. And tank's are big. If you own a Z Fold 4, you know that it is already a thick phone. And this case will make it even thicker. But if you own a Z Fold 4, then you're most likely okay with that. If you weren't, you wouldn't use a foldable.
Now for the Pro's:
- Rugged and durable case design
- The cover screen is protected by a raised lip, but it doesn't interfere with typing. Even with my big sausage fingers.
- The back of the phone provides a nice raised lip around the camera, and a really nice, sturdy kickstand.
- The kickstand is positioned perfectly on the back, and the phone can be propped up in any orientation (folded and unfolded).
- 2 tempered glass screen protectors are included with the case.
- The hinge protection is amazing. Some very intelligent engineering went into making this hinge cover. Yes, it's claim-to-fame is that it doesn't cover the front screen when the device is unfolded. But I really appreciate the quality of it the most. Something about the design and quality of the hinge cover is just incredible. When unfolding the device, it is so smooth and doesn't feel clunky and cheap like other rugged cases.
-The hinge cover includes an awesome hidden compartment for your S-Pen. Personally, it's my favorite implementation of an S-Pen holder for the Z Fold 4. It's hidden and out of the way, but also very accessible when I need to use my S-Pen.
- Karl, the founder of CaseBorne, is a really nice guy and is very personable. And CaseBorne is a small business, so it's great to support them!
Con's (There aren't many):
- The screen protectors are slightly too big. The edges of the protector go right to the edges of the front cover. Unfortunately, after trying to apply the screen protector perfectly several times, I was unsuccessful. As of now, the right edge of my screen protector is slightly lifted off of the cover screen. But it's something I'm willing to tolerate.
- Color selection. I selected the all black case. And it looks great; however, I would like to see some other color options in the next version. Currently, CaseBorne offers black, a light orange, and purple. I would really like to see a dark orange/copper or an olive green.
- When the device is unfolded, the hinge cover acts as a grip for your fingers. However, due to the design of the hinge protector, it doesn't stay completely stationary. There is some slight movement in the hinge cover. I would like to see this somehow made to not move when the device is unfolded. But let me be clear, it doesn't feel cheap, just kinda 'springy'.
Overall, this is an incredible case, and I suggest anyone who owns a Z Fold 4 to check it out.
Caseborne Case Quick Review -
Caseborne Case(without SPen) by ArmadilloTek for Samsung Galaxy Z Fold4
I was searching for a phone case that could maximise protection and I stumbled upon Caseborn by ArmadilloTek . At first glance, the prices were the same as other case manufacturers. The Caseborn case seemed to be more protective than other cases.
In the case box, you can find 2 screen protectors for the external screen, 2 wipes, and some spare two-sided scotch. The case itself is very good, it has great protection all round the phone including the camera and the hinge. It also comes with a horizontal stand which lets you watch videos, play games etc with ease. However, the size of the case overlaps the size of the phone itself but this is expected if it offers maximum protection.
PRO'S:
- Good quality plastic of the case
- Includes hinge protection
- Easy to hold the phone; there is no awkwardness when holding it
- Easily foldable
- The inside of the case has padding so the phone can't get scratched
CON'S:
- It's big for someone with small hands which could cause issues
- Phone case seems bigger than the phone
Overall, the phone case is a very solid build. It has brilliant protection. The phone case has great potential in the market and can definitely be a competitor with other case brands. Time will tell how the case is in use.
https://www.amazon.com/gp/product/B0B86NMFSH
Some may say this case is "MASSIVE", and they're not wrong. However, it's no bigger than any other brand's cases with a hinge protector and pen holder. If you want a fully protective case that can hold the spen and keep your warranty alive because _Samsung_, you basically need something this tanky.
That said, there are some amazing features of the Caseborne over some of the competitors. Just as a reference, I have 2 Samsung cases (Standing with S-Pen, and Slim standing case), a Spigen case with the pen holder on the right side, and a bunch of generic cases with and without the hinge cover. What sets the Caseborne apart are
The one-piece design: Caseborne comes with stickers inside just like the Samsungs, but they don’t seem necessary. The case hugs the phone incredibly well and will not fly off, unlike the Samsungs. Since it’s a single piece, you don’t need to worry about the hinge part scratching up other parts of the case or phone when unfolding it.
Screen protectors: The included front screen glass protectors are good quality, and much better than the dot matrix screen protectors found on the generic ali express cases. And also much better than some of the other $80+ cases that doesn’t even come with a screen protector. The case and the screen protector are an EXACT fit, so if you have a different aftermarket TGSP like me, you will need to remove it before installing it.
Cutouts: This is one of the few cases that actually cover the volume rocker while still allowing for easy fp unlock. Most other cases do not cover a good half of the power/volume rocker side, and some of the other cases that do cover extend out too far to be able to unlock the phone easily. I have not had any issues unlocking my phone with this case.
Unfortunately, it’s not perfect:
The kickstand feels cheap. It works well enough, but the plastic action just doesn’t feel good. Something like ESR. TORRAS, or Spigen’s kickstands (for other phones, not the Fold4) would go a long way to making this case feel much more premium
The actual volume rocker buttons feel a bit too sharp and protrude a bit too far.