Related
hello I have a tmobile s2 galaxy to blink to be root to odin not what went wrong and went on my PC that I needed to find this driver and install it QHSUSB try to put it into download mode but does nothing I connect it to pc and odin pc recognizes it and does nothing but flashing
is there any way to rescue thanks!
posting this in the development section. All of my why
i heard that posting in the right section helps resurrect deceased Galaxies
blackfix said:
hello I have a tmobile s2 galaxy to blink to be root to odin not what went wrong and went on my PC that I needed to find this driver and install it QHSUSB try to put it into download mode but does nothing I connect it to pc and odin pc recognizes it and does nothing but flashing
is there any way to rescue thanks!
Click to expand...
Click to collapse
I would help, but I need someone to help translate what you just said.
does your phone power on?
did you remove battery for 2 minutes and put it back in?
Wtf? Say that again? You tried to root using Odin butit either does not recognize the phone or just gets hung up?
Sent from my SGH-T989 using xda premium
blackfix said:
hello I have a tmobile s2 galaxy to blink to be root to odin not what went wrong and went on my PC that I needed to find this driver and install it QHSUSB try to put it into download mode but does nothing I connect it to pc and odin pc recognizes it and does nothing but flashing
is there any way to rescue thanks!
Click to expand...
Click to collapse
sad to say it, but your phone is dead...the driver your PC is asking for is the qualcom hardware interface driver.
there is a service to fix this type of brick, its around $50 - $80. did you try flashing the .pit file in the odin zip?
Sentence structure helps.
ufff es que nose nada de ingles pero hay voy ,yo intente hacerlo root y de momento odin se para y dice que fallo ok de momento la pc no lo reconoce yo cojo y le saco la bateria y trato de ponerlo en download mode pero el se queda en pantalla negra lo conecto al pc y sale que tengo que instalar uno driver como que no lo estaba reconociendo busco en google y en cuentro los driver lo instalo veo que odin lo reconoce y dise puerto 12 trate de flashar la rom de fabrica pero dice esperando por el dispositivo , e mirado todo sobre brick y nada de resucitarlo
Try this
blackfix said:
hello I have a tmobile s2 galaxy to blink to be root to odin not what went wrong and went on my PC that I needed to find this driver and install it QHSUSB try to put it into download mode but does nothing I connect it to pc and odin pc recognizes it and does nothing but flashing
is there any way to rescue thanks!
Click to expand...
Click to collapse
Try this, maybe it'll help you.
http://forum.xda-developers.com/showthread.php?t=1332103
*Remember the thanks button if it helps*
glensta said:
Try this, maybe it'll help you.
http://forum.xda-developers.com/showthread.php?t=1332103
*Remember the thanks button if it helps*
Click to expand...
Click to collapse
Yeah Sounds Like He Needs To Learn To Use Odin First Before Sending His Phone To Mobile Tech Videos On Case Of Hard Brick...
blackfix said:
ufff es que nose nada de ingles pero hay voy ,yo intente hacerlo root y de momento odin se para y dice que fallo ok de momento la pc no lo reconoce yo cojo y le saco la bateria y trato de ponerlo en download mode pero el se queda en pantalla negra lo conecto al pc y sale que tengo que instalar uno driver como que no lo estaba reconociendo busco en google y en cuentro los driver lo instalo veo que odin lo reconoce y dise puerto 12 trate de flashar la rom de fabrica pero dice esperando por el dispositivo , e mirado todo sobre brick y nada de resucitarlo
Click to expand...
Click to collapse
English.
Sent from my SGH-T989 using xda premium
BaconStep said:
English.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
phew is that nose no English but there I go, I try to do when odin root and stops and says ok for now ruling the pc does not recognize me lame and I take the battery and try to put it into download mode but is is in black screen I connect it to pc and out I have to install a driver as he was not seeking recognition and encounter on google I install the drivers I see odin design recognizes and try port 12 Flashar factory rom but says waiting for the device, and looked all over and nothing to resurrect brick
------------------------------------------------------------------------
Ok mira para que te puedan ayudar mas usa esta pagina en general si traduce la mayoria de las cosas
http://translate.google.com/
-----------------------------------------------------------------------
otra cosa que botones estan haciendo apretados antes de connectar a la computadora? y cual systema estas intentando poner nesesito todos los detalles incluyendo las paginas y todo el processo que estas haciendo......
byt3b0mb said:
sad to say it, but your phone is dead...the driver your PC is asking for is the qualcom hardware interface driver.
there is a service to fix this type of brick, its around $50 - $80. did you try flashing the .pit file in the odin zip?
Click to expand...
Click to collapse
Not Really Needed As Long As It Turns On At Leasts To The Samsung Screen Or Vibrates, Etc... He Said It Can Go Into Download Mode I Think And That Odin Recognizes It...
hayn_pryde46 said:
Not Really Needed As Long As It Turns On At Leasts To The Samsung Screen Or Vibrates, Etc... He Said It Can Go Into Download Mode I Think And That Odin Recognizes It...
Click to expand...
Click to collapse
yes to me it sounds like hes not pressing the right buttons to boot into download mode...
-----------------------------------------------------------------------------------------------------------
mis recomendaciones son estas....
1.Driver ---> http://www.mediafire.com/?6onrjbyd46j4lhj
2.Odin ----> http://www.mediafire.com/?u868rqz4qn0ta34
3.Recovery > http://www.mediafire.com/?5bktv62yoyh3wim
4.Rom ----->http://forum.xda-developers.com/showthread.php?t=1322642 <------- despues de installar recovery descargas este y lo pones en el root de tu memoria.
Source:
http://forum.xda-developers.com/showthread.php?t=1311194&page=70
http://forum.xda-developers.com/showthread.php?t=1322642
dtddemon said:
yes to me it sounds like hes not pressing the right buttons to boot into download mode...
Click to expand...
Click to collapse
Tell him To Hold Volume Buttons And Plug Usb In And Ask What Happens? I Had Two Hard Bricks One For The Vibrant And For An Att GS II...
The Only Ways I Know Of Is Messing With Bootloaders Or A Recovery Freeze While Deleting Partitions...
hayn_pryde46 said:
Tell him To Hold Volume Buttons And Plug Usb In And Ask What Happens? I Had Two Hard Bricks One For The Vibrant And For An Att GS II...
Click to expand...
Click to collapse
yea bro i told him to break it down of what hes doing to ping point what he is doing wrong, and pretty much the instructions on how to do it lol. well see what he says.
Here's another thread that could help ya - good luck bro. I know what's it's like bricking a phone. When I had a Vibrant, I bricked 6 different vibrants until I finally learned how to search and read, cuz that was embarrassing returning to the store and looking at the facial expressions on the employees.
http://forum.xda-developers.com/showthread.php?t=1414341
Buena Suerte !
hayn_pryde46 said:
Not Really Needed As Long As It Turns On At Leasts To The Samsung Screen Or Vibrates, Etc... He Said It Can Go Into Download Mode I Think And That Odin Recognizes It...
Click to expand...
Click to collapse
he says he has a black screen.
We need a more detailed description.. DID IT WORK BEFORE? because it sounds like he never even got to flashing anything.
Teo032 said:
he says he has a black screen.
We need a more detailed description.. DID IT WORK BEFORE? because it sounds like he never even got to flashing anything.
Click to expand...
Click to collapse
Did He Try Pulling Everything Including Sim And Memory Card Wait a Little While Plug Usb In Hold Volume Up And Down Replace Battery ( Without Memory Card And Sim ) If That Doesnt Work He Had A Hard Brick... Thats My Last Check Or A Usb Jig... Does It At Least Have The Soft Brick Triangle And Odin Reads The Phone (Like Com 5 Or Something)?
Ohhhh goddd...cant...control...hulk smash
"Asshole mode activated"
I think you should get you a translator to follow you around bro.
I think My badass hercules almost overheated trying to translate what you said.
Read carefully please!
Froyo and Windows users only at this moment, very busy this days, will make it work with linux and mac os!:
For those who flashed the SBF file with RSD Lite.
Im just trying to make it all easier.
Click to expand...
Click to collapse
You dont need adb installed on your PC!
TIPs: pass MOTOBLUR SETUP.
When you are on the begining of motoblur setup after you flashed your phone, (long press menu) to use the keyboard then type: eebluroff.
You must be done now!
Click to expand...
Click to collapse
Download the zip file and unzip it wherever you want.
Enable "USB debugging" on the phone before proceeding.
Settings -> Applications -> Development -> USB debugging.
1 - Connect your phone to PC (wait for your PC to install drivers) and click on "Install Gingerbreak & 2ndInitDefy".
Note: When commands window closes automatically, check if Gingerbreak and Defy 2init are installed on the phone (MOTOROLA SIDELOADER IS INSTALLED TOO to enable non-market apps), if they are everything is going fine.
2 - Unplug the phone from your PC.
3 - Open Gingerbreak installed on your phone and click on "Root device", (it will take a while) later your phone will reboot when completed.
4 - When your phone boots, go to 2ndinitDefy installed on your phone and download a recovery (try lastest version).
5 - Turn off the phone and turn it on, when you see the led light is blue press volume down button.
You are alredy into bootmenu ready to flash!
Click to expand...
Click to collapse
Donwload:
http://www.mediafire.com/?6kbt33kx64xg11e
I tested it on my PC but I need somebody else to test it, I have adb installed on my PC, need somebody who does not have it installed.
You wont need superoneclick anymore to root!
I will make a video later! I installed Ubuntu I will try it in linux to make this work for every OS and why not MAC OS!
josuearisty said:
Froyo users only:
For those who flashed the SBF file with RSD Lite.
Im just trying to make it all easier.
Testers needed
You dont need adb installed on your PC!
Download the file, unzip it wherever you want.
Remember to enable "USB debugging" before proceding.
Settings -> Applications -> Development -> USB debugging.
Then click on "Install Gingerbreak & 2ndInitDefy"
1 - Open Gingerbreak installed on your phone and click on "Root device", your phone will reboot when completed.
2 - Go to 2ndinitDefy installed on your phone and download a recovery (try lastest version).
Donwload:
http://www.mediafire.com/?6kbt33kx64xg11e
I tested it on my PC but I need somebody else to test it, I have adb installed on my PC, need somebody who does not have it installed.
You dont need superoneclick anymore to root!
Click to expand...
Click to collapse
Hola puedes poner las instrucciones en español y para que sirve ...perdon x mi ignoracia es
Es mejor Gingleblur q froyo cuales son las ventajas y las contras...saludos amigo....
Hi there,
May I know if there is a way to switch from CWM recovery to TWRP? I tried to simply flash the zip for TWRP but then my bravo won't start...
Thanks.
mataflakitas said:
Hola puedes poner las instrucciones en español y para que sirve ...perdon x mi ignoracia es
Es mejor Gingleblur q froyo cuales son las ventajas y las contras...saludos amigo....
Click to expand...
Click to collapse
Voy a hacer guias en español para cada thread que he creado
Esto es para si algo te ha salido mal y tu telefono no quiere iniciar quedandose solamente en el logo de moto y tienes que por desgracia FLASHEAR el SBF de Froyo con RSD LITE.
Entonces despues que estes en Froyo, podras seguir estos pasos y no tener que usar superoneclick, en mi opinion esto es mas facil.
Pruebalo cuando puedas!
brucezyc said:
Hi there,
May I know if there is a way to switch from CWM recovery to TWRP? I tried to simply flash the zip for TWRP but then my bravo won't start...
Thanks.
Click to expand...
Click to collapse
I try doing it too but no success, I think you should flash first a custom rom, then you will be able to flash touch recovery and it will for sure work.
I will let know about some test I make!
I'll be honest, I didn't try it, but it will work. That's really not a bad idea and would work with any phone Gingerbreak works on....You should release that in Android General.
I would use it, I'm just too lazy to flash an sbf and then set my phone back up again. I'm happy with my Bravo for the moment...and its my onlyl phone...That really is a simple, yet useful, solution.
gracias
josuearisty said:
Voy a hacer guias en español para cada thread que he creado
Esto es para si algo te ha salido mal y tu telefono no quiere iniciar quedandose solamente en el logo de moto y tienes que por desgracia FLASHEAR el SBF de Froyo con RSD LITE.
Entonces despues que estes en Froyo, podras seguir estos pasos y no tener que usar superoneclick, en mi opinion esto es mas facil.
Pruebalo cuando puedas!
I try doing it too but no success, I think you should flash first a custom rom, then you will be able to flash touch recovery and it will for sure work.
I will let know about some test I make!
Click to expand...
Click to collapse
Oooo muchas gracias amigo voy a probar que suerte q hablas español estoy aprendiendo muchas cosas contigo amigo josuearisty... saludos
oh no, i'm not unglug my phone after install Install Gingerbreak & 2ndInitDefy, then i click Gingerbreak to root
and now it's not on (, just have logo motorola
help me
now i'm ok, i wipe data, cache and do it again
but i dont click root on Gingerbreak , but on my phone still have superuser icon ? it success or not
i used superoneclick to root, but not success after i installed Gingerbreak & 2ndInitDefy
skeevy420 said:
I'll be honest, I didn't try it, but it will work. That's really not a bad idea and would work with any phone Gingerbreak works on....You should release that in Android General.
I would use it, I'm just too lazy to flash an sbf and then set my phone back up again. I'm happy with my Bravo for the moment...and its my onlyl phone...That really is a simple, yet useful, solution.
Click to expand...
Click to collapse
I think it is still not that simple, I will post some tips and be more specif.
mataflakitas said:
Oooo muchas gracias amigo voy a probar que suerte q hablas español estoy aprendiendo muchas cosas contigo amigo josuearisty... saludos
Click to expand...
Click to collapse
Siempre mi amigo, cualquier cosa estamos aqui.
kevins547 said:
oh no, i'm not unglug my phone after install Install Gingerbreak & 2ndInitDefy, then i click Gingerbreak to root
and now it's not on (, just have logo motorola
help me
now i'm ok, i wipe data, cache and do it again
but i dont click root on Gingerbreak , but on my phone still have superuser icon ? it success or not
i used superoneclick to root, but not success after i installed Gingerbreak & 2ndInitDefy
Click to expand...
Click to collapse
Maybe you did not follow steps as you should, I think I have to make steps easier to understand, so that noobs and advanced users can do it all.
Thanks for trying!
when unglug the phone from Pc, the box USB debugging is tick in or not ?
kevins547 said:
when unglug the phone from Pc, the box USB debugging is tick in or not ?
Click to expand...
Click to collapse
Of course it has to be enable.
Else it is not going to work.
gracias
josuearisty said:
Of course it has to be enable.
Else it is not going to work.
Click to expand...
Click to collapse
amigo podra subir un video para saber con mayor facilida como se hace y las instrucciones en español bueno tambien para ingles claro... creo que novatos como yo ...avemos muchos en este foro y estariamos muy agradecicdo con usted amigo josuearisty ...
oye amigo otra duda que pasa si mi pc tiene adb instalado.... puede ocacionar un error en mi motorola bravo ...?
otra duda por que cuando baje su archivo mi pc me lo detecto como un virus...
mataflakitas said:
amigo podra subir un video para saber con mayor facilida como se hace y las instrucciones en español bueno tambien para ingles claro... creo que novatos como yo ...avemos muchos en este foro y estariamos muy agradecicdo con usted amigo josuearisty ...
oye amigo otra duda que pasa si mi pc tiene adb instalado.... puede ocacionar un error en mi motorola bravo ...?
otra duda por que cuando baje su archivo mi pc me lo detecto como un virus...
Click to expand...
Click to collapse
Esta semana estare algo ocupado, el video creo que lo hare la semana que viene.
Usar el adb del archivo no te va a ocasionar ningun problema, ni a tu telefono ni a la computadora.
La aplicacion gingerbreak tiene un exploit dentro y los antivirus lo identifican como un virus, solo desactivalo si lo vas a usar.
--------------------------------------------------------
If you have adb installed on your pc, using this one will cause no problem to the phone or your pc.
Your antivirus detects gingerbreak as a virus because of an exploit command inside the apk file, you can deactivate your antivirus and use it with no problem, no risk with it.
I'll add, s1c/rage against the cage/gingerbreak all show up as viruses because they are. Not kill you PC virus, but virus none the less. Technically they're exploits, but still get picked up by scanners.
Gonna need some testers for LINUX and MAC, when its ready I will you know people!
Working great!. Will flash a Rom right now . Thnx to make our life easier!.
Took a few flashes, but I got there in the end! Great stuff, thanks!!
Worked like a charm. Thanks!!
Cut a long story short, AT&T push the N920AUCS4CPK1 at Dec 1, this is the full package. People outside the US can download an flash it by Odin.
https://mega.nz/#!4ZhTWQha!WhM0CNQ0FJ-ouH1vRwMo-I8XCZtzK-nKGcZ4OurFwy4
Hope to help everyone, and waiting Android N..... I'm afraid that I couldn't upload the new firmware before it, download them is more expensive.
Muchas gracias desde México, gran ayuda.
smxwang said:
Cut a long story short, AT&T push the N920AUCS4CPK1 at Dec 1, this is the full package. People outside the US can download an flash it by Odin.
https://mega.nz/#!4ZhTWQha!WhM0CNQ0FJ-ouH1vRwMo-I8XCZtzK-nKGcZ4OurFwy4
Hope to help everyone, and waiting Android N..... I'm afraid that I couldn't upload the new firmware before it, download them is more expensive.
Click to expand...
Click to collapse
Thanks, man. I did not use your particular link, but you're doing The Good Man's Work.
My only question is... is there a way to know that the full image has not been tempered with? I ended up using the one from The Android Soul that I linked to in my thread. Part of me wonders if they could've been modified or not.
Razielspiritblue said:
Muchas gracias desde México, gran ayuda.
Click to expand...
Click to collapse
Amigo desde que version lo subiste ?
Jairconnor said:
Amigo desde que version lo subiste ?
Click to expand...
Click to collapse
I did it from aucu2bpe6, yo lo hice desde la aucu2bpe6 y flasheo perfecto
Perfecto ...
Tengo un ligero problema las descargas no las completa y siempre tengo que estar dentro de la app donde estoy descargando si me salgo se cancela todo, probe regresar a lollipop pero creo que esta version tiene algun bloque no me deja hacer downgrade .
---------- Post added at 02:56 AM ---------- Previous post was at 02:55 AM ----------
smxwang said:
Cut a long story short, AT&T push the N920AUCS4CPK1 at Dec 1, this is the full package. People outside the US can download an flash it by Odin.
https://mega.nz/#!4ZhTWQha!WhM0CNQ0FJ-ouH1vRwMo-I8XCZtzK-nKGcZ4OurFwy4
Hope to help everyone, and waiting Android N..... I'm afraid that I couldn't upload the new firmware before it, download them is more expensive.
Click to expand...
Click to collapse
Esta version no deja hacer downgrade :/
Jairconnor said:
Perfecto ...
Tengo un ligero problema las descargas no las completa y siempre tengo que estar dentro de la app donde estoy descargando si me salgo se cancela todo, probe regresar a lollipop pero creo que esta version tiene algun bloque no me deja hacer downgrade .
---------- Post added at 02:56 AM ---------- Previous post was at 02:55 AM ----------
Esta version no deja hacer downgrade :/
Click to expand...
Click to collapse
Try to doit a full wipe & cache in recovery, im in this update and works fine for me, actually, is better Idle battery, with my other version lost 20%! of battery when i sleep, with this path i only lost 6% during night. Try to write first in english, then you can explain better in spanish.
Trataste ya de hacerle el full wipe y cache desde el recovery? yo tengo esta versión que postearon y me trabaja bien sin ningún detalle incluso la batería mejoro bastante, durante la noche antes perdía 20% de pila, ahora solo pierdo el 6%. Lo del downgrade que yo sepa siempre que brincas desde una versión a otra KK-ll-mm se bloquea el bootloader, por eso no puedes hacer el dowgrade a lollipop, algunas veces es posible hacer downgrade pero dentro del mismo sistema a una version anterior de patch (una version antes pero dentro de las mismas de mm o kk o ll dependiendo de donde estes) pero ya no puedes brincar a una version de andriod anterior, hay manera de instalar versiones pasadas pero ocupas el twrp y una rom de preferencia stock recovery odex o deodex, ademas del kernel de la version de android donde te quedaste, trata de escribir en ingles primero y ya después puedes escribir en español, si no te pueden castigar, ya que es un foro en ingles, te lo digo porque a mi ya me mandaron una ves un correo advirtiendome sobre ban si posteaba primero en español.
---------- Post added at 05:39 PM ---------- Previous post was at 05:34 PM ----------
smxwang said:
Cut a long story short, AT&T push the N920AUCS4CPK1 at Dec 1, this is the full package. People outside the US can download an flash it by Odin.
https://mega.nz/#!4ZhTWQha!WhM0CNQ0FJ-ouH1vRwMo-I8XCZtzK-nKGcZ4OurFwy4
Hope to help everyone, and waiting Android N..... I'm afraid that I couldn't upload the new firmware before it, download them is more expensive.
Click to expand...
Click to collapse
Ty bro, i dont know why but my battery is better with this patch, before when i slept lost 20% of battery by idle, but now, i only lost 6%!! maybe not all patch is for security, can be for system too, well i hope android N come soon, ty for this patch bro!
tanks
thanks for the firmware a live question in Italy once installed have problems with the network or the language?
did u find out any difference of it?
bto001 said:
Try to doit a full wipe & cache in recovery, im in this update and works fine for me, actually, is better Idle battery, with my other version lost 20%! of battery when i sleep, with this path i only lost 6% during night. Try to write first in english, then you can explain better in spanish.
Trataste ya de hacerle el full wipe y cache desde el recovery? yo tengo esta versi�n que postearon y me trabaja bien sin ning�n detalle incluso la bater�a mejoro bastante, durante la noche antes perd�a 20% de pila, ahora solo pierdo el 6%. Lo del downgrade que yo sepa siempre que brincas desde una versi�n a otra KK-ll-mm se bloquea el bootloader, por eso no puedes hacer el dowgrade a lollipop, algunas veces es posible hacer downgrade pero dentro del mismo sistema a una version anterior de patch (una version antes pero dentro de las mismas de mm o kk o ll dependiendo de donde estes) pero ya no puedes brincar a una version de andriod anterior, hay manera de instalar versiones pasadas pero ocupas el twrp y una rom de preferencia stock recovery odex o deodex, ademas del kernel de la version de android donde te quedaste, trata de escribir en ingles primero y ya despu�s puedes escribir en español, si no te pueden castigar, ya que es un foro en ingles, te lo digo porque a mi ya me mandaron una ves un correo advirtiendome sobre ban si posteaba primero en español.
I'll try everything, reboot in recovery modo, full wipes, etc.. in one version past of mm 6.0 did a downgrade to 5.1 but in this version i cant, but my problems are in the downloads i dont know what happend to my phone :/
Eh intentado de todo, hice los wipes corresppnidentes en una version pasada de marsh pude regresar a lollipop pero con esta revision no puedo me gustaria quedarme en marsh pero mi problema esta con las descargas es una falla en el soft imaginó pero no se corrige no se que pasa
Click to expand...
Click to collapse
I'll try everything, reboot in recovery modo, full wipes, etc.. in one version past of mm 6.0 did a downgrade to 5.1 but in this version i cant, but my problems are in the downloads i dont know what happend to my phone :/
Eh intentado de todo, hice los wipes corresppnidentes en una version pasada de marsh pude regresar a lollipop pero con esta revision no puedo me gustaria quedarme en marsh pero mi problema esta con las descargas es una falla en el soft imaginó pero no se corrige no se que pasa[/QUOTE]
Send me a PM, do you repartitione with PIT?, Manda mensaje privado, hiciste la reparticion con el archivo pit o solo pusiste los 4 archivos?
My last update was september patch cph1, let's say i skip the october patch, can i go directly to this last patch update? I'm using odin as i live outside US region..
Hi All,
I have a Note 5 N920A running Android 5.1.1 and build number N920AUCU2AO16. I want to upgrade tyo the latest software which i believe i can from the links posted above (*N920AUCS4CPK1*).
I, however haev one question as this is the first time I am doing anything other than an auto OTA update. Mine was an At&T phone which i purchased in the US on ebay and it was an unlocked one adn i currently use it in the UK with no issues. By upgrading to the latest stock firmware, will i lose the unlocking or has the update nothing to do with unlocking ? Please help.
redklaver said:
My last update was september patch cph1, let's say i skip the october patch, can i go directly to this last patch update? I'm using odin as i live outside US region..
Click to expand...
Click to collapse
Hi, you can install whatever version if you use Odin, can skip from lollipop to MM if you want, no problems with that, but some peoples said to this version blocks the bootloader (cant rollback to LL), in my case i had the boodloader blocker after and dont care for me, you can check if you have the bootloader block in the screen of upgrade (odin mode) if said secure download enable your bootloader is block. For me, this version help me to save battery xD so, its geat for me xD.
Bogus79 said:
Hi All,
I have a Note 5 N920A running Android 5.1.1 and build number N920AUCU2AO16. I want to upgrade tyo the latest software which i believe i can from the links posted above (*N920AUCS4CPK1*).
I, however haev one question as this is the first time I am doing anything other than an auto OTA update. Mine was an At&T phone which i purchased in the US on ebay and it was an unlocked one adn i currently use it in the UK with no issues. By upgrading to the latest stock firmware, will i lose the unlocking or has the update nothing to do with unlocking ? Please help.
Click to expand...
Click to collapse
If you have a factory or IMEI unlock dont worry for lose it, change system not affect unlock, however if you have a home unlock you will lose it, The most certain is that your phone is factory or imei unlock cause i never seen a home unlock for this model, you sould doit whitout afraid.
bto001 said:
Hi, you can install whatever version if you use Odin, can skip from lollipop to MM if you want, no problems with that, but some peoples said to this version blocks the bootloader (cant rollback to LL), in my case i had the boodloader blocker after and dont care for me, you can check if you have the bootloader block in the screen of upgrade (odin mode) if said secure download enable your bootloader is block. For me, this version help me to save battery xD so, its geat for me xD.
If you have a factory or IMEI unlock dont worry for lose it, change system not affect unlock, however if you have a home unlock you will lose it, The most certain is that your phone is factory or imei unlock cause i never seen a home unlock for this model, you sould doit whitout afraid.
Click to expand...
Click to collapse
How do i know if it is home unlock or IMEI/Factory unlock ?
Bogus79 said:
How do i know if it is home unlock or IMEI/Factory unlock ?
Click to expand...
Click to collapse
Not have a way to know it, but for now, note 5 doesnt have a home unlock (except maybe Sprint variant), so your phone is most probably factory or imei unlock, you can actualizate without afraid.
bto001 said:
Hi, you can install whatever version if you use Odin, can skip from lollipop to MM if you want, no problems with that, but some peoples said to this version blocks the bootloader (cant rollback to LL), in my case i had the boodloader blocker after and dont care for me, you can check if you have the bootloader block in the screen of upgrade (odin mode) if said secure download enable your bootloader is block. For me, this version help me to save battery xD so, its geat for me xD.
Even when using adb sideload?
If you have a factory or IMEI unlock dont worry for lose it, change system not affect unlock, however if you have a home unlock you will lose it, The most certain is that your phone is factory or imei unlock cause i never seen a home unlock for this model, you sould doit whitout afraid.
Click to expand...
Click to collapse
How about using adb sideload? Can i just skip from september update to this last december update, or i have to sideloaded the october first?
redklaver said:
How about using adb sideload? Can i just skip from september update to this last december update, or i have to sideloaded the october first?
Click to expand...
Click to collapse
Hi bro, you have donwload this uptade? the files on this post are made for odin (have 4 parts+pit) is not a flashable OTA (flashable zip), this is a complete rom if you want to flash it by adb maybe first you need to convert this on a flashable zip, so, this is a complete rom you can flash from wherever patch you want, adb is most used for some ota's patch (in this case is not only a patch, is a complete rom w/patch), you need use odin this time.
bto001 said:
Hi bro, you have donwload this uptade? the files on this post are made for odin (have 4 parts+pit) is not a flashable OTA (flashable zip), this is a complete rom if you want to flash it by adb maybe first you need to convert this on a flashable zip, so, this is a complete rom you can flash from wherever patch you want, adb is most used for some ota's patch (in this case is not only a patch, is a complete rom w/patch), you need use odin this time.
Click to expand...
Click to collapse
I already download from other source and that is zip file, so it has to be sideloaded..
---------- Post added at 04:03 PM ---------- Previous post was at 03:54 PM ----------
redklaver said:
I already download from other source and that is zip file, so it has to be sideloaded..
Click to expand...
Click to collapse
Oh yeah, i forgot, and it was only 24MB .. so, do i have to sideloaded the patch before this, or can i go straight to this new one?
[/COLOR]
Oh yeah, i forgot, and it was only 24MB .. so, do i have to sideloaded the patch before this, or can i go straight to this new one?[/QUOTE]
If you have only a patch of 24 mb you can sent it by sideload like ota, but you need to install first the other patch ( need to install all patch from your version of SO to this cpk1) this is in case to you want use adb sideload for actualizate to cpk1 you need install every patch from your version until this (install each patch released from your version to cpk1 in order), but if you dont wanna install any patch you can donwload the files from smxwang (this post) it is a complete rom with all patch. Sorry for my english xD im learning it.
Resume:
ADB sideload used to install OTA actualization, in this case you need to install in release order each one.
Odin ROM used to install a complete system, in this case you can install no matter in which system version you are.
If you want use a sideload you need search all patch released from september to december and install in order, otherwise if you dont have all patch you can use this files to install a complete system no metter if you have your sistem in january, march, july, september, doesnt metter.
All good. I had a problem. Teoephone turned on and as a result I now can not enter through my unlock pattern, I understand that I can roll back to the factory settings, but I want to pull out the data, some of them are on the memory card, but there is also in the phone's memory, where 128 GB, like can I drop the pattern without deleting the data?
Find Xiaomi support center to help you.
It should still have warranty covered.
They should have, but they might ask you to proof the phone belongs to you, like some purchase receipt.
You can call them with another phone to ask if they can do it and what you need to prepare to bring along so you don't have to run back and forth.
It is a serious glitch visit the Redmi Customer service center it will be helpful to you. For next time I would suggest you use cloud storage, it is the best way to restore the data.
spanjokus said:
Todo bien. Tuve un problema. Teoephone encendido y como resultado ahora no puedo entrar a través de mi patrón de desbloqueo, entiendo que puedo volver a la configuración de fábrica, pero quiero sacar los datos, algunos de ellos están en la tarjeta de memoria, pero hay también en la memoria del teléfono, donde 128 GB, ¿puedo soltar el patrón sin borrar los datos?
Click to expand...
Click to collapse
Hello my friend
Were you able to unblock the pattern?
SBUnlock said:
Hello my friend
Were you able to unblock the pattern?
Click to expand...
Click to collapse
Good afternoon! Unfortunately no
I have an error in the CTS profile match that gives me an error and I have not rooted the mobile...the support team tells me that it is not your original room...and I changed from room cn to room eu.... the McDonald's app doesn't work for me because of that..any solution to fix it without root?
jaimele said:
I have an error in the CTS profile match that gives me an error and I have not rooted the mobile...the support team tells me that it is not your original room...and I changed from room cn to room eu.... the McDonald's app doesn't work for me because of that..any solution to fix it without root?
Click to expand...
Click to collapse
Root it then..lol
Decrypted data, flashed modified super.img that is r/w with modified fstab, deleted some system apps, flashed 676.22 system drivers, gpu undervolted and slight overclocked to 692 mhz, twrp recovery, magisk and still I pass
Also didn't you flash custom recovery? Maybe because bootloader unlocked.. Not sure As soon as I received my device I unlocked bootloader and rooted.
JWnSC said:
No flasheé nada, solo recibió el terminal con la sala CN y lo cambió a través de la configuración y actualicé el archivo eu original de la sala ... y luego reinicié el móvil con el botón y el botón apagar - y me sale bloqueo del gestor de arranque. ..
Click to expand...
Click to collapse
Así que no sé por qué me sale ese error.
jaimele said:
Así que no sé por qué me sale ese error.
Click to expand...
Click to collapse
Reflash firmware to see if issue persist.
Just root it and bypass safteynet once and for all and free your device from 3rd party handcuffs and this type of nonesense. You own your device, not them.
No quiero rootearlo todavía... es difícil para mí instalar todas mis aplicaciones... incluso si hago una copia de seguridad, no copia todos los datos de todas las aplicaciones si no está rooteado
jaimele said:
No quiero rootearlo todavía... es difícil para mí instalar todas mis aplicaciones... incluso si hago una copia de seguridad, no copia todos los datos de todas las aplicaciones si no está rooteado
Click to expand...
Click to collapse
Hmm.. Well if you find out why it won't pass safety net even though your not rooted please let us know. I don't see how a stock device wouldn't pass it.. Like I say before, I think your bootloader being unlocked is affecting it.
Your bootloader is unlocked, that's why you're getting the error. Either install Magisk and patch the error, or go back to your original ROM and relock your bootloader (of course, without root, otherwise your smartphone won't work anymore).
Mitesoro said:
Su cargador de arranque está desbloqueado, por eso está recibiendo el error. Instale Magisk y corrija el error, o vuelva a su ROM original y vuelva a bloquear su cargador de arranque (por supuesto, sin root, de lo contrario su teléfono inteligente ya no funcionará).
Click to expand...
Click to collapse
It does not have root... Its original rom, I don't even know what it is... Last time I downloaded the one that came from the Red Magic website on 4.28 Europe/Asia and it doesn't work... I even installed a 3.18 version and it It left the phone useless and I had to format data..
As I have also seen, changing the text payload properties, deleting the "_un" file, it is configured to the global room, but of course I don't know if it is clean and it will continue with the error...
jaimele said:
It does not have root... Its original rom, I don't even know what it is... Last time I downloaded the one that came from the Red Magic website on 4.28 Europe/Asia and it doesn't work... I even installed a 3.18 version and it It left the phone useless and I had to format data..
Click to expand...
Click to collapse
Is OEM unlocking enabled on your device and you're unable to turn it off? If so, then your smartphone is unlocked, and you need to lock it; otherwise, the error will persist.
[ fastboot flashing unlock ] for unlocking bootloader
[ fastboot flashing lock ] for locking bootloader
The phone has the oem disabled so the bootloader is not unlocked...it is a super rare case. I understand a lot about this type of thing and it has never happened to me, but I will need a specific file to fix in a non-root way, I don't want to root it. I know that with magisk I fix it, but in this case it's a bug in the original room, the safetynet application detects it as if it was tricked
jaimele said:
The phone has the oem disabled so the bootloader is not unlocked...it is a super rare case. I understand a lot about this type of thing and it has never happened to me, but I will need a specific file to fix in a non-root way, I don't want to root it. I know that with magisk I fix it, but in this case it's a bug in the original room, the safetynet application detects it as if it was tricked
Click to expand...
Click to collapse
"Okay, that's really stupid. I thought maybe it would be the same mistake as mine. Maybe just open BL once and then close it again "
Mitesoro said:
"Okay, that's really stupid. I thought maybe it would be the same mistake as mine. Maybe just open BL once and then close it again "
Click to expand...
Click to collapse
I don't know what your problem is...
jaimele said:
The phone has the oem disabled so the bootloader is not unlocked...it is a super rare case. I understand a lot about this type of thing and it has never happened to me, but I will need a specific file to fix in a non-root way, I don't want to root it. I know that with magisk I fix it, but in this case it's a bug in the original room, the safetynet application detects it as if it was tricked
Click to expand...
Click to collapse
I am confused. Have you installed a new ROM or not?
You said you changed from "cn" to "eu". You said one ROM left the phone unusable. You must have "flashed" a new ROM, several times. Maybe the problem is that the original ROM's identity is somehow known, and anything else will cause this mismatch. Try restoring the "cn" ROM.
Mostly out of curiosity: Have you enabled Developer Options? Do they show any kind of entry for "OEM unlock", even if greyed-out?
Maybe you should install one of the idiot "root checkers", like Momo or TBChecker. You might get a more detailed explanation of what it doesn't like, which *might* be related to what is making "CTS Profile" not pass.
J.Michael said:
Estoy confundido. ¿Has instalado una nueva ROM o no?
Dijiste que cambiaste de "cn" a "eu". Dijiste que una ROM dejó el teléfono inutilizable. Debe haber "flasheado" una nueva ROM, varias veces. Tal vez el problema es que la identidad de la ROM original se conoce de alguna manera, y cualquier otra cosa causará esta falta de coincidencia. Intenta restaurar la ROM "cn".
Principalmente por curiosidad: ¿Ha habilitado las Opciones de desarrollador? ¿Muestran algún tipo de entrada para "Desbloqueo OEM", incluso si están en gris?
Tal vez deberías instalar uno de los tontos "verificadores raíz", como Momo o TBChecker. Es posible que obtenga una explicación más detallada de lo que no le gusta, que *podría* estar relacionado con lo que hace que el "Perfil CTS" no pase.
Click to expand...
Click to collapse
If l change from rom uncommon to eucomon and it works correctly but does not pass the cts profile. The oem is grayed out and the bootloader is locked.
jaimele said:
If l change from rom uncommon to eucomon and it works correctly but does not pass the cts profile. The oem is grayed out and the bootloader is locked.
Click to expand...
Click to collapse
I thought you said that you started with "cn" and changed to "eu". I'm saying maybe that's what's wrong. Maybe the device somehow identifies itself as "naturally cn", so if it is not "cn", and you are not using a Magisk module to "spoof" its properties, it fails CTS Profile.
Even if you don't want to install Magisk, you might gain some insight by reading in the Magisk thread. I'm not sure what affects CTS Profile.
J.Michael said:
Pensé que dijiste que comenzaste con "cn" y cambiaste a "eu". Estoy diciendo que tal vez eso es lo que está mal. Tal vez el dispositivo de alguna manera se identifique como "naturalmente cn", por lo que si no es "cn", y no está utilizando un módulo Magisk para "falsificar" sus propiedades, falla el perfil CTS.
Incluso si no desea instalar Magisk, puede obtener información leyendo el hilo de Magisk. No estoy seguro de qué afecta al perfil CTS.
Click to expand...
Click to collapse
Pero antes recuerdo que funcionaba sin ser cn