Develop Bugs

How can i revert back to MiUI from lıneageos 14.1?

hey guys i want to go back to miui global beta rom. how can i do it officially like mi flash? thanks in advance

Use MI Flash tool to flash back the official MIUI Rom

Fastboot rom...

Two ways.
Mi Flash method: you totally clean the phone and loose internal storage and twrp. Fastboot rom.
TWRP : you need to have installed the Zcx recovery. After that, full wipe and install the rom (recovery rom).

How can i do fastboot rom? Could you clarify the situation?

With Mi flash app for Windows. Download fastboot rom and flash with Mi flash app. Be careful to choose good option in bootom bar of Miflash, because default option will lock your bootloader...

warface9991 said:
hey guys i want to go back to miui global beta rom. how can i do it officially like mi flash? thanks in advance
Click to expand...
Click to collapse
Make sure you download the .tar.gz or .tgz file if you are using miflash
or else no .bat scripts that are required for miflash tool to work.

beeep22 said:
Make sure you download the .tar.gz or .tgz file if you are using miflash
or else no .bat scripts that are required for miflash tool to work.
Click to expand...
Click to collapse
When i press the flash button it gives an error on the screen with red colour

warface9991 said:
When i press the flash button it gives an error on the screen with red colour
Click to expand...
Click to collapse
Did you unzip and nagivate to the folder with the flash_all.bat file?
IT could be folder directory too long. Move the rom folder with the flash_all.bat file into the C:\ directory.
If it says flash_all.bat not found then it may be that you navigated to the wrong folder or the rom file that you downloaded doesn't contain the flash_all.bat script.
IT may also be that you dont have the drivers installed. You could try getting fastboot/adb and checking if your device is found by typing 'fastboot devices'.
Remember that your device must be in fastboot mode (reboot vol down+power) (shown by bunny and fastboot logo).

Hi all sory for bad englis. So i have rooted phone and instaled recovery. Now i am on redurrection rom. I want install xiaomi eu rom. So i can flash with recovery like other roms normaly xiaomi eu rom ? I read on other sites for boot loop but there are old pages. Thank you for ansvers

[ROOT] [MAGISK] How to root

Just wanted to inform you, that rooting with Magisk works like a charm. Even without TWRP.
What you need:
Magisk Manager: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
boot.img from your ROM (prepatched boot.img for CN_V10.0.11.0 ROM here: https://filebase.philipp.technology/filebase/index.php?page=Entry&entryID=19)
Unlocked Bootloader
ADB and Fastboot on your PC (Simple ADB & Fastboot Installer: https://filebase.philipp.technology/filebase/index.php?page=Entry&entryID=5)
Installation:
Install MagiskManager.apk on your Smartphone
---SKIP IF YOU USE THE PREPATCHED BOOT.IMG---
Put the unpatched boot.img on your phone
Open MagiskManager and Click "Install"
Select "Patch boot.img" and choose the boot.img with your file manager
Copy the "patched_boot.img" file on your PC
---CONTINUE HERE---
Now connect your Mix 3 to the PC and boot in fastboot mode (over the command line: adb reboot bootloader)
Navigate with the command line to your folder, where you saved the patched_boot.img
Now flash the patched_boot.img file with fastboot: fastboot flash boot patched_boot.img
If the flash is successfull you can reboot the phone with fastboot reboot
Open the MagiskManager and verify that Magisk is installed and your phone is rooted.

Thanks so much! Will try this out! Nice work!

Thanks, after i root my mix 3 can i flash the xiaomi.eu rom on it too without problems ?

Normally you don't need root to flash Xiaomi.eu ROM, just TWRP. But there is no TWRP yet. You could try "Flash Fire", but I don't know if it would work. Never did that before. If you try it make sure, that you have USB Debugging enabled and know how to use common tools like MiFlash etc.
If you are unexperienced wait for TWRP.

PJF16 said:
Normally you don't need root to flash Xiaomi.eu ROM, just TWRP. But there is no TWRP yet. You could try "Flash Fire", but I don't know if it would work. Never did that before. If you try it make sure, that you have USB Debugging enabled and know how to use common tools like MiFlash etc.
If you are unexperienced wait for TWRP.
Click to expand...
Click to collapse
I used TWRP before and Rooted before too but i never used Flash Fire or Flashify. I don't know how hard it would be to use them.

Please report back your success and how it goes for you!

SacredSovL said:
I used TWRP before and Rooted before too but i never used Flash Fire or Flashify. I don't know how hard it would be to use them.
Click to expand...
Click to collapse
It's risky and something I won't be trying, I would wait for TWRP

Hi PJF16
How did you get the boot.img from your device without root? I'd love to make a unmodified copy before trying this out

I got it from the fastboot ROM which I also uploaded to the forum. See here: https://forum.xda-developers.com/mi-mix-3/development/xiaomi-mi-mix-3-fastboot-roms-t3869532

Tested and 100% working! Recommended

smiba said:
Tested and 100% working! Recommended
Click to expand...
Click to collapse
Did u flash xiaomi.eu rom or something else ?

PJF16 said:
Just wanted to inform you, that rooting with Magisk works like a charm. Even without TWRP.
What you need:
Magisk Manager: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
boot.img from your ROM (prepatched boot.img for CN_V10.0.11.0 ROM here: https://filebase.philipp.technology/filebase/index.php?page=Entry&entryID=19)
Unlocked Bootloader
ADB and Fastboot on your PC (Simple ADB & Fastboot Installer: https://filebase.philipp.technology/filebase/index.php?page=Entry&entryID=5)
Installation:
Install MagiskManager.apk on your Smartphone
---SKIP IF YOU USE THE PREPATCHED BOOT.IMG---
Put the unpatched boot.img on your phone
Open MagiskManager and Click "Install"
Select "Patch boot.img" and choose the boot.img with your file manager
Copy the "patched_boot.img" file on your PC
---CONTINUE HERE---
Now connect your Mix 3 to the PC and boot in fastboot mode (over the command line: adb reboot bootloader)
Navigate with the command line to your folder, where you saved the patched_boot.img
Now flash the patched_boot.img file with fastboot: fastboot flash boot patched_boot.img
If the flash is successfull you can reboot the phone with fastboot reboot
Open the MagiskManager and verify that Magisk is installed and your phone is rooted.
Click to expand...
Click to collapse
I feel like I'm missing something. I fastboot flash but it gets hung up in cmd. Should not take as long as it is trying to

souless poet said:
I feel like I'm missing something. I fastboot flash but it gets hung up in cmd. Should not take as long as it is trying to
Click to expand...
Click to collapse
Nevermind figured it out...duh.

Not working on 8.11.15 dev china rom...
Patched boot is much smaller than it should be and after flashing and fastboot reboot command, phone goes back to fastboot mode

It's normal that the patched boot.img is smaller.

PJF16 said:
It's normal that the patched boot.img is smaller.
Click to expand...
Click to collapse
I know that.
But this is quite smaller than usual and, anyway, it doesn't boot after flashing

Anyone have any issues with v4A magisk module? After I flashed it I lost the ability to turn on wifi. Wondering if anyone else has had that issue.

where can i find the pre patched boot img of 10.0.12.0?

Just use the one for 10.0.11.0.

nosidefcp said:
where can i find the pre patched boot img of 10.0.12.0?
Click to expand...
Click to collapse
Hi, here You can find patched boot for 10.0.12.0:
https://yadi.sk/d/aVlSEC_r7xj0VA

Can I use the redmi note 8's rom on my 8T?

I have an 8T, it's the same of 8 only with the Nfc, can i use the ginkgo rom?

If you are referring to the MIUI EU ROM you could try, but it will probably fail and nobody has tried it yet.
The issue is we have no way (yet) to recover the device if will bootloop. We have the full ROM file, but it's a recovery zip: inside the zip I can't find a recovery we could flash in fastboot.
EDIT:
Download this recovery for RN8 https://www.androidfilehost.com/?fid=4349826312261617206
Extract the file and rename it to recovery.img
Reboot the device in fastboot and run
"fastboot boot [recovery.img]"
This will NOT flash the recovery but only boot it. If it loops, just reboot the device and will be back to normal.

olivercervera said:
If you are referring to the MIUI EU ROM you could try, but it will probably fail and nobody has tried it yet.
The issue is we have no way (yet) to recover the device if will bootloop. We have the full ROM file, but it's a recovery zip: inside the zip I can't find a recovery we could flash in fastboot.
EDIT:
Download this recovery for RN8 https://www.androidfilehost.com/?fid=4349826312261617206
Extract the file and rename it to recovery.img
Reboot the device in fastboot and run
"fastboot boot [recovery.img]"
This will NOT flash the recovery but only boot it. If it loops, just reboot the device and will be back to normal.
Click to expand...
Click to collapse
Ok thx, what about the custom aosp roms?

zikam12 said:
Ok thx, what about the custom aosp roms?
Click to expand...
Click to collapse
Well, try this step first. Without TWRP, you can't flash anything.

zikam12 said:
I have an 8T, it's the same of 8 only with the Nfc, can i use the ginkgo rom?
Click to expand...
Click to collapse
Yes it loading (but without Nfc and maybe wifi won't work)

soket1 said:
Yes it loading (but without Nfc and maybe wifi won't work)
Click to expand...
Click to collapse
you've tried?

zikam12 said:
you've tried?
Click to expand...
Click to collapse
Instructions

soket1 said:
Instructions
Click to expand...
Click to collapse
Can u translate it? Pls?

zikam12 said:
Can u translate it? Pls?
Click to expand...
Click to collapse
Instructions from Pilprod
Conditions: unlocked bootloader, access to Fastboot, computer with ADB and all drivers.
TWRP
Ginkgo v10.3.5.0.PCOMIXM firmwares for fastboot
1. Load the phone in Fastboot and connect to the PC.
2. Download the firmware and recovery from adb on the links above.
3. Unpack the recovery with adb in the folder (for sample: C:\\adb)
4. Unpack the firmware .
From the image folder, copy system.img, recovery.img and the boot.img, to folder with TWRP and adb.
5. Open the command line and write .
cd C:\adb
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
Click to expand...
Click to collapse
If everything is done correctly, the phone should start booting from the bootleg Redmi Note 8
6. After booting into the system, you can try and experiment with the firmware from RN8.
If you want to return to Redmi note 8T firmware and / or put TWRP and ROOT, then again load the phone in fastbut and continue.
fastboot flash recovery twrp.img
Click to expand...
Click to collapse
Loading into recovery.
After downloading TWRP, if you want to firmware Redmi note 8T, then do Wipe Data, System and all caches, without closing TWRP, copy to the phone this firmware, flash and boot into the system.

Hi all !!!
so did anyone manage to flash a ROM from the redmi note 8 on the 8T ?

Question How to root without twrp

My problem is that I have installed a custom rom that is no longer in support in XDA .
So when I tried to to boot using fastboot boot twrp.img command my device won't boot in twrp therefore I am not able to install twrp hence magisk is still not working.
Is there any other way to root my mi 11x witouht using custom recovery.

Yes. It's the twrp fastboot method.
1. First of all you need the boot.img from your ROM. For a fastboot ROM it's in the Images folder. For an OTA you have to use a payload.bin extractor.
2. Then install the magisk manager app and use patch boot.img
3. Then install the patched boot.img through fastboot
Full instructions:
Installation
The Magic Mask for Android
topjohnwu.github.io

Robert314 said:
Yes. It's the twrp fastboot method.
1. First of all you need the boot.img from your ROM. For a fastboot ROM it's in the Images folder. For an OTA you have to use a payload.bin extractor.
2. Then install the magisk manager app and use patch boot.img
3. Then install the patched boot.img through fastboot
Full instructions:
Installation
The Magic Mask for Android
topjohnwu.github.io
Click to expand...
Click to collapse
Thanks sir. But someone says me that when he tried this method his phone stuck on miui logo and not working.. he has same mi 11x.

Tanishkmusic said:
Thanks sir. But someone says me that when he tried this method his phone stuck on miui logo and not working.. he has same mi 11x.
Click to expand...
Click to collapse
Maybe they used the wrong boot.img for their ROM. Are you using MIUI? If so it may be more difficult as you've got to get the correct version from firmware finder. Even then magisk might not like your MIUI install. I've heard people running custom ROMs able to install magisk on Mi11X. E.g HavocOS, ArrowOS etc
This is the only way to install magisk properly at the moment
Edit: if you prefer MIUI there is another alternative by flashing on of the improved MIUI ROMs (they just take MIUI and add slightly extra features and improve performance). I can't link the telegram group on XDA but you can PM me

Tanishkmusic said:
My problem is that I have installed a custom rom that is no longer in support in XDA .
So when I tried to to boot using fastboot boot twrp.img command my device won't boot in twrp therefore I am not able to install twrp hence magisk is still not working.
Is there any other way to root my mi 11x witouht using custom recovery.
Click to expand...
Click to collapse
To install twrp do this:
(pre requisites)
-driver for f3 installed;
-adb and fastboot or platform tool (preferable) on the pc;
-usb debugging enabled on the phone.
Therefore:
1) download the .img file of the twrp you want to install, I used this:
Downloads for : Xiaomi Redmi K40 / Poco f3 | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
2) rename the file to twrp.img (for convenience);
3) move the trwp.img file to the adb and fastboot folder (if you use adb) or to the platform tool folder (if you use platform);
4) always in the same folder open a cmd window (go to the address bar, type cmd and press enter);
5) after activating usb debug on the phone, turn it off, start it in fastboot (long press of Power + volume -) and connect it to the pc;
6) check if fastboot recognizes the phone with this command:
Code:
fastboot devices
If your phone code appears you can start it in twrp.
7) to start it in twrp type this command:
Code:
fastboot boot twrp.img
8) now the phone should automatically boot into twrp, so go to Advanced> Flash Current TWRP
done, you should now have twrp installed. for the root there is this guide:
Magisk App 24.3 (Magisk Manager) Latest Version For Android 2023
Magisk is a multi-tasking rooting solution that root device in a systemless format without changing the internal files.
magiskapp.com

Question Need help rooting the Poco F3

Hello fellow XDA'ers
I have waited and unlocked the phone, running the MIUI 12.5.1.0 (RKHEUXM) the EU Official Rom that came with the phone, and was following the guide on how to root from NaldoTech, but i'm stuck, magisk can't patch any Firmware file i throw at it...
Don't know what i am doing wrong, i opened the zip files manually looking for the boot.img file but i cant seem to find it in any of the Firmwares i download from XiaomiFirmwareUpdater.
Also tried downloading the rom file and extracting the contents using the xiaomi-flashable-firmware-creator, but no luck with that either, throws some permission error at extracting the payload.bin
what can i do from here??
thanks in advance

Easy peasy
Steps
Download Adb and fastboot tool.
Or just download TWRP image and start CMD from there "the folder containing the twrp img" (in destination bar type cmd and press Enter) /the drivers should be installed and working properly ofc.
1- set phone in fastboot mode then plug it in to PC
2- Type: fastboot boot twrp.img (twrp here is the img file)
Then the phone will boot into twrp.
The phone will be shown in PC. Paste Magisk in the phone. Then go back and flash it using TWRP. Then reboot to system. And you're all done.

laid1995 said:
.
Click to expand...
Click to collapse

doesnt boot to twrp just turns off :S

Fyat said:
doesnt boot to twrp just turns off :S
Click to expand...
Click to collapse
You're doing something wrong then.
Check all drivers are set up properly. Try flashing twrp then boot to it using Volume UP + Power button.

Make sure you download Nebrassy's twrp 3.5.10

Managed to do it, not with twrp tho, the way i intended originally, i found this payload extractor, went on miui and download latest package (on the phone), after that sent the file to pc and extracted the contents to the payload extractor tool, follow the tool's guide and Tadaaaa! got yoursef a boot.img.
after that was simple and follow the rest of the NaldoTech guide, which is sending the boot.img to phone, open magisk manager, click install, select the boot image to pach, wait couple seconds and done. After that just copy the magisk patched boot image to pc and turn off your phone, enter fastboot, and flash the boot.img in boot_a and boot_b.
and you are done boot the phone and open magisk app to see the installed confirmation

Fyat said:
Managed to do it, not with twrp tho, the way i intended originally, i found this payload extractor, went on miui and download latest package (on the phone), after that sent the file to pc and extracted the contents to the payload extractor tool, follow the tool's guide and Tadaaaa! got yoursef a boot.img.
after that was simple and follow the rest of the NaldoTech guide, which is sending the boot.img to phone, open magisk manager, click install, select the boot image to pach, wait couple seconds and done. After that just copy the magisk patched boot image to pc and turn off your phone, enter fastboot, and flash the boot.img in boot_a and boot_b.
and you are done boot the phone and open magisk app to see the installed confirmation
Click to expand...
Click to collapse
Whatever was your way, I'm glad you managed to do it

sir i need boot.img file for poco f3

ZAki6464 said:
sir i need boot.img file for poco f3
Click to expand...
Click to collapse
Good

Which version do you need?

Is this international version I should get to use in USA on T-Mobile to root the same way as you?
Amazon F3

I'm using Europe version currently on Global 12.5.6.0 (RKHEUXM)

Fyat said:
I'm using Europe version currently on Global 12.5.6.0 (RKHEUXM)
Click to expand...
Click to collapse
Do you have access to gpu rendering tweaks in turbo game mode ? I can't make it work, I'm on same version than you

Greenspoof said:
Do you have access to gpu rendering tweaks in turbo game mode ? I can't make it work, I'm on same version than you
Click to expand...
Click to collapse
I'm not sure where to find these options as i do not use the turbo mode, can you point to it?