Develop Bugs

Can I use the redmi note 8's rom on my 8T?

I have an 8T, it's the same of 8 only with the Nfc, can i use the ginkgo rom?

If you are referring to the MIUI EU ROM you could try, but it will probably fail and nobody has tried it yet.
The issue is we have no way (yet) to recover the device if will bootloop. We have the full ROM file, but it's a recovery zip: inside the zip I can't find a recovery we could flash in fastboot.
EDIT:
Download this recovery for RN8 https://www.androidfilehost.com/?fid=4349826312261617206
Extract the file and rename it to recovery.img
Reboot the device in fastboot and run
"fastboot boot [recovery.img]"
This will NOT flash the recovery but only boot it. If it loops, just reboot the device and will be back to normal.

olivercervera said:
If you are referring to the MIUI EU ROM you could try, but it will probably fail and nobody has tried it yet.
The issue is we have no way (yet) to recover the device if will bootloop. We have the full ROM file, but it's a recovery zip: inside the zip I can't find a recovery we could flash in fastboot.
EDIT:
Download this recovery for RN8 https://www.androidfilehost.com/?fid=4349826312261617206
Extract the file and rename it to recovery.img
Reboot the device in fastboot and run
"fastboot boot [recovery.img]"
This will NOT flash the recovery but only boot it. If it loops, just reboot the device and will be back to normal.
Click to expand...
Click to collapse
Ok thx, what about the custom aosp roms?

zikam12 said:
Ok thx, what about the custom aosp roms?
Click to expand...
Click to collapse
Well, try this step first. Without TWRP, you can't flash anything.

zikam12 said:
I have an 8T, it's the same of 8 only with the Nfc, can i use the ginkgo rom?
Click to expand...
Click to collapse
Yes it loading (but without Nfc and maybe wifi won't work)

soket1 said:
Yes it loading (but without Nfc and maybe wifi won't work)
Click to expand...
Click to collapse
you've tried?

zikam12 said:
you've tried?
Click to expand...
Click to collapse
Instructions

soket1 said:
Instructions
Click to expand...
Click to collapse
Can u translate it? Pls?

zikam12 said:
Can u translate it? Pls?
Click to expand...
Click to collapse
Instructions from Pilprod
Conditions: unlocked bootloader, access to Fastboot, computer with ADB and all drivers.
TWRP
Ginkgo v10.3.5.0.PCOMIXM firmwares for fastboot
1. Load the phone in Fastboot and connect to the PC.
2. Download the firmware and recovery from adb on the links above.
3. Unpack the recovery with adb in the folder (for sample: C:\\adb)
4. Unpack the firmware .
From the image folder, copy system.img, recovery.img and the boot.img, to folder with TWRP and adb.
5. Open the command line and write .
cd C:\adb
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
Click to expand...
Click to collapse
If everything is done correctly, the phone should start booting from the bootleg Redmi Note 8
6. After booting into the system, you can try and experiment with the firmware from RN8.
If you want to return to Redmi note 8T firmware and / or put TWRP and ROOT, then again load the phone in fastbut and continue.
fastboot flash recovery twrp.img
Click to expand...
Click to collapse
Loading into recovery.
After downloading TWRP, if you want to firmware Redmi note 8T, then do Wipe Data, System and all caches, without closing TWRP, copy to the phone this firmware, flash and boot into the system.

Hi all !!!
so did anyone manage to flash a ROM from the redmi note 8 on the 8T ?

Return to stock

I've tried xiaomi.eu rom, and it just doesn't feel good for me. I want to go back to stock, but i'm afraid of anti-roolback brick. What would be steps to return to stock without twrp? Do i follow other instructions and use mi flash tool and fastboot rom? can i put rom in downloaded_zip and flash it that way from xiaomi.eu rom?

You have to use Mi Flash Tool.
Download latest MIUI fastboot rom and extract it twice with 7zip so you have a folder with the image and batch files.
Put phone in fastboot mode.
And flash it with Mi Flash by selecting the folder with the image files.
It will give an error if you don't have a log folder so create that first in Miflash folder.

d3smond said:
You have to use Mi Flash Tool.
Download latest MIUI fastboot rom and extract it twice with 7zip so you have a folder with the image and batch files.
Put phone in fastboot mode.
And flash it with Mi Flash by selecting the folder with the image files.
It will give an error if you don't have a log folder so create that first in Miflash folder.
Click to expand...
Click to collapse
Did that, didn't have the log folder and got an error at the end but everything worked after reset, except for netflix, which won't download on an unlocked bootloader, but fixed that with magisk and fix...

Problem with Fastboot reboot and Can't install new firmware

Hello guys, i have a mi 10t pro, today try after unlock devices 7 days to flashed and downgrade because my battery drain is significative, i had 12.5.1 eea firmware and try to downgrade to 12.0.19, but now phone is in continus reboot in to fastboot, i try to flash with last miflash tool, but after 2sec is tell me that firmware upgrade is complete and now i can't start my smartphone. i can try to flash last rom fastboot 12.5.1 but without result. How i can resolve this problem? thanks in advance

When trying to do any major change like a downgrade, you must factory reset. MiFlash should have done that for you, but I guess there's a chance it didn't.
To do a factory reset from Fastboot you can use a compatible version of TWRP and just boot into it (not installing it).
Eg. fastboot boot TWRP_apollo_3.5.0_10-beta_1_whyle.img
From within TWRP you can then do a factory reset and see if it'll boot.
If it still boots into fastboot then you have the option of an alternative ROM. Xiaomi.eu provides a debloated version of the Chinese MIUI ROM. I'm running its latest 12.6 version and it has no problems with battery drain. https://xiaomi.eu/community/threads/21-6-23.61942/

chisnz said:
When trying to do any major change like a downgrade, you must factory reset. MiFlash should have done that for you, but I guess there's a chance it didn't.
To do a factory reset from Fastboot you can use a compatible version of TWRP and just boot into it (not installing it).
Eg. fastboot boot TWRP_apollo_3.5.0_10-beta_1_whyle.img
From within TWRP you can then do a factory reset and see if it'll boot.
If it still boots into fastboot then you have the option of an alternative ROM. Xiaomi.eu provides a debloated version of the Chinese MIUI ROM. I'm running its latest 12.6 version and it has no problems with battery drain. https://xiaomi.eu/community/threads/21-6-23.61942/
Click to expand...
Click to collapse
Thanks i can try any solution. i install trought cmd fastboot comand twrp image file and after try to reset it? help me if you have other solution to I was hoping there was a way to bring it back to a stock firmware or a recovery firmware. I tried to flash all.bat inside firmware 12.5.1 my last firmware, proceeded it's fine and complete but after install my phone reboot continuos after logo. as if it didn't have a firmware installed.
P.s. Explain to me the procedure to start twrp without installing it step by step. Thanks so much ^^

To use TWRP to factory reset, first find a compatible TWRP. I used the latest version from:
https://forum.xda-developers.com/t/...r-mi-10t-mi-10t-pro-redmi-k30s-ultra.4187427/
which was TWRP_apollo_3.5.0_10-beta_1_whyle.img
Boot into download mode
Then type this exactly (or change to a different file name if you're using a different version of TWRP):
fastboot boot TWRP_apollo_3.5.0_10-beta_1_whyle.img
Once TWRP starts up, go into Advanced, Wipe.
Tick
- data
- cache
- dalvik (dalvik cache)
and select to wipe it.
Reboot system.
That should leave you with no account set up and enable you to boot and setup from scratch in most cases.

chisnz said:
To use TWRP to factory reset, first find a compatible TWRP. I used the latest version from:
https://forum.xda-developers.com/t/...r-mi-10t-mi-10t-pro-redmi-k30s-ultra.4187427/
which was TWRP_apollo_3.5.0_10-beta_1_whyle.img
Boot into download mode
Then type this exactly (or change to a different file name if you're using a different version of TWRP):
fastboot boot TWRP_apollo_3.5.0_10-beta_1_whyle.img
Once TWRP starts up, go into Advanced, Wipe.
Tick
- data
- cache
- dalvik (dalvik cache)
and select to wipe it.
Reboot system.
That should leave you with no account set up and enable you to boot and setup from scratch in most cases.
Click to expand...
Click to collapse
ok it's fine i have enter in twrp now and format data + cache + dalvik, But now reboot in fastboot mode and it always starts in fastboot continuos. how should i proceed now to install a basic firmware and be able to start the mi 10t pro eea?

i want to try to install with twrp, what rom i need? fastboot rom tgz or full rom .zip from mi.com site? thanks

update Mi-flash. There's 2021 version.
Code:
fastboot reboot bootloader
disconnect USB cable and reconnect it again
flash again with Mi-flash, do not lock it.
Fastboot ROMs are more than 3GB.

pl1992aw said:
update Mi-flash. There's 2021 version.
Code:
fastboot reboot bootloader
disconnect USB cable and reconnect it again
flash again with Mi-flash, do not lock it.
Fastboot ROMs are more than 3GB.
Click to expand...
Click to collapse
hELLO PL1992, i have use now MiFlash20210226 version installed for 1sec and nothing is installed, the mobile is in fastboot but I can't figure out how to complete the flash of the fastboot rom. I am using the latest EEA fastboot rom for my device, I have tried several versions even earlier but nothing. he says he has completed the procedure but in 1 sec he does absolutely nothing. Do you have solution ideas to try? alternatives to miflash? I also tried to install by extracting the Fastboot rom from inside the rom with flash all.bat, the procedure always go well, but the phone keeps restarting after the MIUI logo every 2sec. I have windows 10 pro i don't know if it is the problem

fantidus90 said:
hELLO PL1992, i have use now MiFlash20210226 version installed for 1sec and nothing is installed, the mobile is in fastboot but I can't figure out how to complete the flash of the fastboot rom. I am using the latest EEA fastboot rom for my device, I have tried several versions even earlier but nothing. he says he has completed the procedure but in 1 sec he does absolutely nothing. Do you have solution ideas to try? alternatives to miflash? I also tried to install by extracting the Fastboot rom from inside the rom with flash all.bat, the procedure always go well, but the phone keeps restarting after the MIUI logo every 2sec.
Click to expand...
Click to collapse
Did you execute the code given to you before you flash it?
In Mi-flash, click Driver, then install.
After it's done, reboot your PC.
Then do the
Code:
fastboot reboot bootloader
command.
The flashing process should be more than 500 seconds if it's done correctly.
The fastboot ROM should be extracted, not using directly the tgz file.
Rename the extracted folder name short, like "1", and put in C:/ drive.

pl1992aw said:
Did you execute the code given to you before you flash it?
In Mi-flash, click Driver, then install.
After it's done, reboot your PC.
The flashing process should be more than 500 seconds if it's done correctly.
The fastboot ROM should be extracted, not using directly the tgz file.
Rename the extracted folder name short, like "1", and put in C:/ drive.
Click to expand...
Click to collapse
I followed your advice but nothing has changed. i have make a screen, i create in C:/miui/1/all extracted rom .tgz, but flashed for 5sec and completed process =/

fantidus90 said:
I followed your advice but nothing has changed
Click to expand...
Click to collapse
Run command:
Code:
fastboot reboot bootloader
Phone will reboot to fastboot.
Change a USB port.
Do not use USB hub.
If you are using desktop PC, connect it to the motherboard USB port.

fantidus90 said:
I followed your advice but nothing has changed. i have make a screen, i create in C:/miui/1/all extracted rom .tgz, but flashed for 5sec and completed process =/
Click to expand...
Click to collapse
Click the log to see what it done.
If you think this is bothersome, then do the TWRP way you want to.
For TWRP way, you flash the recovery version zip.

pl1992aw said:
Click the log to see what it done.
If you think this is bothersome, then do the TWRP way you want to.
For TWRP way, you flash the recovery version zip.
Click to expand...
Click to collapse
i have 3 report in log. posted here the file. thanks for help bro. Hope that you can find my problem and i can use my new xiaomi again.

fantidus90 said:
i have 3 report in log. posted here the file. thanks for help bro. Hope that you can find my problem and i can use my new xiaomi again.
Click to expand...
Click to collapse
Code:
echo Missmatching image and device
It seems the ROM and your device is not matching, so it don't flash.
First confirm what your phone model is. The model should be written on the box came with the phone.
Install this program:
XiaomiADBFastbootTools (Java)
https://github.com/Szaki/XiaomiADBFastbootTools
It will need java SE, follow the FAQ guide in that github to use the program.
It should show you what phone you have.
Like this

fantidus90 said:
i have 3 report in log. posted here the file. thanks for help bro. Hope that you can find my problem and i can use my new xiaomi again.
Click to expand...
Click to collapse
Hi there, probably found the answer. It can be because of your PC CPU.
Read here:
https://forum.xda-developers.com/t/3638653/post-82085077
If you are very sure your phone is apollo, then you can do similar to this one and try again:
https://forum.xda-developers.com/t/3638653/post-73105436
Do not lock bootloader

pl1992aw said:
Hi there, probably found the answer. It can be because of your PC CPU.
Read here:
https://forum.xda-developers.com/t/3638653/post-82085077
If you are very sure your phone is apollo, then you can do similar to this one and try again:
https://forum.xda-developers.com/t/3638653/post-73105436
Do not lock bootloader
Click to expand...
Click to collapse
I have resolve thanks pl1992, i want to share my solution. Use Twrp to boot with fastboot boot twrp name.img command. After i copy recovery firmware .zip on my usb stick/type C connection and i connect directly on my mi 10t pro type c, not read first time in ntfs system, after i format with fat32 and recopy recovery firmware .zip and install throught TWRP. ALL is Ok now. Thank you

Question Need help rooting the Poco F3

Hello fellow XDA'ers
I have waited and unlocked the phone, running the MIUI 12.5.1.0 (RKHEUXM) the EU Official Rom that came with the phone, and was following the guide on how to root from NaldoTech, but i'm stuck, magisk can't patch any Firmware file i throw at it...
Don't know what i am doing wrong, i opened the zip files manually looking for the boot.img file but i cant seem to find it in any of the Firmwares i download from XiaomiFirmwareUpdater.
Also tried downloading the rom file and extracting the contents using the xiaomi-flashable-firmware-creator, but no luck with that either, throws some permission error at extracting the payload.bin
what can i do from here??
thanks in advance

Easy peasy
Steps
Download Adb and fastboot tool.
Or just download TWRP image and start CMD from there "the folder containing the twrp img" (in destination bar type cmd and press Enter) /the drivers should be installed and working properly ofc.
1- set phone in fastboot mode then plug it in to PC
2- Type: fastboot boot twrp.img (twrp here is the img file)
Then the phone will boot into twrp.
The phone will be shown in PC. Paste Magisk in the phone. Then go back and flash it using TWRP. Then reboot to system. And you're all done.

laid1995 said:
.
Click to expand...
Click to collapse

doesnt boot to twrp just turns off :S

Fyat said:
doesnt boot to twrp just turns off :S
Click to expand...
Click to collapse
You're doing something wrong then.
Check all drivers are set up properly. Try flashing twrp then boot to it using Volume UP + Power button.

Make sure you download Nebrassy's twrp 3.5.10

Managed to do it, not with twrp tho, the way i intended originally, i found this payload extractor, went on miui and download latest package (on the phone), after that sent the file to pc and extracted the contents to the payload extractor tool, follow the tool's guide and Tadaaaa! got yoursef a boot.img.
after that was simple and follow the rest of the NaldoTech guide, which is sending the boot.img to phone, open magisk manager, click install, select the boot image to pach, wait couple seconds and done. After that just copy the magisk patched boot image to pc and turn off your phone, enter fastboot, and flash the boot.img in boot_a and boot_b.
and you are done boot the phone and open magisk app to see the installed confirmation

Fyat said:
Managed to do it, not with twrp tho, the way i intended originally, i found this payload extractor, went on miui and download latest package (on the phone), after that sent the file to pc and extracted the contents to the payload extractor tool, follow the tool's guide and Tadaaaa! got yoursef a boot.img.
after that was simple and follow the rest of the NaldoTech guide, which is sending the boot.img to phone, open magisk manager, click install, select the boot image to pach, wait couple seconds and done. After that just copy the magisk patched boot image to pc and turn off your phone, enter fastboot, and flash the boot.img in boot_a and boot_b.
and you are done boot the phone and open magisk app to see the installed confirmation
Click to expand...
Click to collapse
Whatever was your way, I'm glad you managed to do it

sir i need boot.img file for poco f3

ZAki6464 said:
sir i need boot.img file for poco f3
Click to expand...
Click to collapse
Good

Which version do you need?

Is this international version I should get to use in USA on T-Mobile to root the same way as you?
Amazon F3

I'm using Europe version currently on Global 12.5.6.0 (RKHEUXM)

Fyat said:
I'm using Europe version currently on Global 12.5.6.0 (RKHEUXM)
Click to expand...
Click to collapse
Do you have access to gpu rendering tweaks in turbo game mode ? I can't make it work, I'm on same version than you

Greenspoof said:
Do you have access to gpu rendering tweaks in turbo game mode ? I can't make it work, I'm on same version than you
Click to expand...
Click to collapse
I'm not sure where to find these options as i do not use the turbo mode, can you point to it?

Question Devices not detected after install Fastboot ROM

I try to install fastboot rom with MiFlashTool, this is my FastbootROM nabu_global_images_V14.0.3.0.TKXMIXM_20230306.0000.00_13.0_global_80c69df295.tgz
After i flash with MiFlashTool, the process is never end, but my Mi Pad 5 restarting without any reason in middle of flashing, but the process keep going, then i close the MiFlashTool, after that i try to fastboot devices in my platform tools directory, now my Mi Pad completely undetected in my PC, also in MiFlashTool now not detected
I can still open Recovery and Fastboot mode, but in Fastboot mode i cant do anything because my PC cant detect my devices, also i try with my other PC but still not detected, maybe the main reason this happend is because i terminate the MiFlashTool during process because i saw my Mi Pad restarting, any help for this issue ?

kzquandary said:
I can still open Recovery and Fastboot mode
Click to expand...
Click to collapse
It indicates that your bootloader is still full functional. Otherwise recovery wouldn't boot anymore.
- Windows device manager shows what?
- output of 'fastboot devices'?

WoKoschekk said:
It indicates that your bootloader is still full functional. Otherwise recovery wouldn't boot anymore.
- Windows device manager shows what?
- output of 'fastboot devices'?
Click to expand...
Click to collapse
the problem for devices not detected is solved sir, but now i stuck in fastboot mode every time i use fastboot reboot, because last time ago i want to try disable-verity using empty vbmeta.img, then after i try command fastboot flash --disable-verity vbmeta.img, i ended up in Fastboot Mode, now i want to try install new rom sir and i have download it miui_NABUGlobal_V14.0.3.0.TKXMIXM_45f6ebc192_13.0.zip , any tips for install this rom to Mi Pad ? because i cant use mi flash tool for install new rom

kzquandary said:
because i cant use mi flash tool for install new rom
Click to expand...
Click to collapse
Did u try this one?
XiaoMiTool V2 - Modding of Xiaomi devices made easy for everyone
XiaoMiTool V2 is a easy to use tool to install rom on your Xiaomi device. Modding made easy for everyone! Download it for free now!
www.xiaomitool.com

WoKoschekk said:
Did u try this one?
XiaoMiTool V2 - Modding of Xiaomi devices made easy for everyone
XiaoMiTool V2 is a easy to use tool to install rom on your Xiaomi device. Modding made easy for everyone! Download it for free now!
www.xiaomitool.com
Click to expand...
Click to collapse
i downloaded your suggested app, but there is no Xiaomi Pad 5 in device list, and my downloaded recovery rom is zip, i just cant find tool for flash zip in fastboot sir

Your download is only a recovery ROM and not the full fastboot ROM. Full fastboot ROM:
MiPad 5 – MIUI Download Xiaomi Official ROM

Ok, a recovery zip is only flashable in a recovery. It's like any other flashable zip for TWRP, i.e. a Magisk installer zip or sth else. These zips need a shell to execute their commands. Fastboot is only for flashing single images via cmd line on your PC.
Download the full fastboot ROM. It's a *.tgz-archive that needs to be unpacked for the Mi Flash Tool (v2).

WoKoschekk said:
Ok, a recovery zip is only flashable in a recovery. It's like any other flashable zip for TWRP, i.e. a Magisk installer zip or sth else. These zips need a shell to execute their commands. Fastboot is only for flashing single images via cmd line on your PC.
Download the full fastboot ROM. It's a *.tgz-archive that needs to be unpacked for the Mi Flash Tool (v2).
Click to expand...
Click to collapse
Thanks sir, its worked, i use fastboot room with .tgz and all solved

WoKoschekk said:
Ok, a recovery zip is only flashable in a recovery. It's like any other flashable zip for TWRP, i.e. a Magisk installer zip or sth else. These zips need a shell to execute their commands. Fastboot is only for flashing single images via cmd line on your PC.
Download the full fastboot ROM. It's a *.tgz-archive that needs to be unpacked for the Mi Flash Tool (v2).
Click to expand...
Click to collapse
But any tips for permanent root in Mi Pad 5 sir ? because every time i restart, its always unrooted

kzquandary said:
But any tips for permanent root in Mi Pad 5 sir ? because every time i restart, its always unrooted
Click to expand...
Click to collapse
Install the Magisk app, extract the boot.img from inside your firmware and patch it with Magisk. Then flash the patched boot.img with fastboot flash boot "your patched image" and start your device.

WoKoschekk said:
Install the Magisk app, extract the boot.img from inside your firmware and patch it with Magisk. Then flash the patched boot.img with fastboot flash boot "your patched image" and start your device.
Click to expand...
Click to collapse
Wow thanks sir, its worked like magic