So phone was soft bricked.I couldn't get to the home.It was rebooting to odin mode(download mode) or bootlooping but i could not reboot phone to normal.So I decided to flash a custom rom in Odin.First I was getting fail beacuse of frp.And I also tried twrp recovery and it also failed.After trying download mode said "an error has occurred while updating device software" and i tried to fix this with SmartSwitch but that failed(when I was connecting my phone it said unsupported phone and i couldn't do anything).So I found unofficial variation which is FRP Hijacker.And it worked well.I could get back the normal downlad mode and also recovery mode.After this i tried again to flash rom.It was successfuly flashed.I thought it's done, but no.Phone was bootlooping again.I didn't know what to do.So I found on internet combination file for this phone and flashed it in odin.It failed after this i rebooted my phone and it showed again the "An error has occurred while updating device software".So I opened again FRP Hijacker and clicked to "SoftBrick fix" and after this my phone died.And now I can't turn on the phone,cant get to recovery or download Nothing!It also is not charging.
Could someone help me pls?I will be so thankful!!
Related
Hi,
Hi I was given an s3 sprint. It doesn't get past the sprint screen, but when plugged in it goes all the way until played with then it'll reboot. It does however go into download and recovery mode which leads me to believe its a software problem. The phone is not rooted/ fully stock. Could someone walk me through rooting, installing custom recovery and ROM via Odin? Also there seems to be no water damage. Per download mode:: binary-samsung official
System satus-official
Qualcomm secure boot enable
Warranty-0
Bootloader ap swaev-2
PS I already tried Odin but failed at aboot mbn. Now upon booting it reads ... firmware upgrade encountered an issue. Please select recovery mode in Kies and try again?
Pleas ask in here instead. Also first get the phone working by either flashing it using kies 2.6, or by using odin and flashing this image. Be sure to unzip it first.
Hello,
I have tried upgrading my SM-P600 via odin. I have used official 5.1.1 rom . I used default odin setting as usual, but during the upgrade windows showed unrecognized device message, and odin showed failed.
If I am trying to boot in any mode (even if I am plugging in charger) I am getting "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I have attached an image.
Can anyone help explaining how can I solve this (if this is possible). Also I would like to know what could cause issue like this? I have been flashing stuff to android devices many times, had boot loops and other messy things, but download mode have always worked.
Any help would be appreciated, thanks in advance.
I was able to fix this by myself. I was able to boot into download mode. I am not sure why it have started working. I just left device to fully uncharge, then charged it and download mode was accessable.
I have flashed older rom which I had P600UEUCND2_P600XARCND2_XAR and now everything fine. I will download 5.1.1 once again and will try to flash it (I did fresh windows install, because I think last time it was windows issue).
Hi
I'm new here so sorry if anything I say is a bit strange~
As the thread title mentioned I got a softbricked Samsung S4 mini LTE GT-I9195.
The Recovery is unavailable showing the dead android "no command"
Normal booting leeds to a bootloop.
Only download mode is available so I started flashing a stock firmware to it (I9195XXUCNK4_I9195QXZCOA1_DBT) via OdIn giving PASS
Which helped nothing~
I took the risk flashing with PIT file - which it survived - still softbricked.
I also tried flashing stock recovery and custom recoverys to it- helps nothing.
Now I guess I have to flash a new bootloader to it but I have no clue...
Isn't a new bootloader part of the stock firmware I tried to flash to it
Do I need a special PIT file?
Still no recovery, no ADB and bootloop....
Please help
EDIT:
Well about ADB...
When I plug in the phone the device doesn't offer win7 a ADB device (in download mode)
I cannot access Android 4.4.2 due to the bootloop - so I cannot enable USB debugging~
The recovery isn't startable with "no command" - so I also cannot enable it there...
Is the a way to flash something with ADB to the device via Odin/download mode?
USB-JIG didn't help either
Well the USB-JIG started the phone in download mode
And instead of showing "ODIN MODE" it said "FACTORY MODE"
But it didn't start flashing or something...
Download mode is still available~
Any ideas?
I rooted my device, everything was fine until then but i wanted a custom rom so i tried to install twrp via odin, this didn´t work and the phone would not boot (recovery error validating footer) so i downloaded the stock firmware in the forum, when i tried to flash it odin got stuck at "setup connection" for like 30 minutes so i restarted the phone and instead of going to the download screen it displayed "an error has ocurred while updating the software, use the emergency recovery function in smart switch"
Smart switch didn't work so i came back to odin, now when i try to flash the stock firmware it tells me "sw rev check fail bootloader device* binary 1" i can´t tell what binary the phone has because the notch is hiding it but i can tell that the problem is that i cant downgrade the bootloader, where can i get a newer firmware? or can i just force the downgrade somehow?
now i´m stuck with a phone that won´t boot :crying:
Xplow said:
I rooted my device, ...
now i´m stuck with a phone that won´t boot :crying:
Click to expand...
Click to collapse
"ReiBoot for Android" (free demo ) helped me to enable download mode
odin could then flash stock firmware A105FNXXU3ATA1,
i had no lock to enable root or magisk "Error verifying vbmeta image"
but i can use the phone...
stoessel said:
"ReiBoot for Android" (free demo ) helped me to enable download mode
odin could then flash stock firmware A105FNXXU3ATA1,
i had no lock to enable root or magisk "Error verifying vbmeta image"
but i can use the phone...
Click to expand...
Click to collapse
not sure what reiboot android is but his problem has nothin to do with that.. he just needs to dl n flash latest rev firmware..
theres frija, firmware halabtech n many other sites u can dl firmware at.
i have the same problem!!!!!
when i connect to my laptop the phone connect and 1 sec letter disconnect
anyone can help?!?
:crying:
I'll try to be as detail as possible so that anyone with experience can help me. BTW this is my first thread.
The phone is originally a Samsung Galaxy J2 Ace with J2 Prime firmware installed by me
Note 1: I flashed this firmware about 2-3 years ago without problems.
On a random day, I decided to restart my phone, and suddenly, a bootloop!!
Later I realised a soft brick had occured.
So I did a factory reset and wiped cache thru recovery mode.
But no use.
Also I remember seeing errors like "ddi read failed" "ddi write failed"
No idea what it means.
Then I tried flashing stock firmware through Odin using Download Mode.
It failed and gave an error "Write operation failed"
That is similar to the error I saw in the phone like "ddi write failed"
So, now here comes my big mistake.
I tried flashing TWRP using Odin.
It gave a pass, but I think I messed up.
So now I cant use Stock Recovery Mode also. It keeps showing "Installing System Update" for eternity.
So now Im blank and left out.
I found a few similar posts like mine but they werent clear and Im not sure as they seemed dangerous like playing with PIT file, doing NAND erase and something.
So, I dont want to go to the service center and pay a high price. Does anyone know what I can do to fix it myself. Thanks.
Note : I downloaded firmware from samfrew.com. I checked and the firmware year is 2018. Is that a problem. Should i try to find the latest firmware possible? (Sammobile doesnt have my firmware and they cap download speeds too much anyway)
Okay, some more info
When trying to boot like normal, it will sometimes show an error saying "Custom binary blocked by SECURE BOOT" before it starts its bootloop .
Also checked in Download mode, i have frp lock enabled and secure boot enabled.