Develop Bugs

Universal Mobile Power Kit

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[USB DC 3-WAY Plug Adapter] – Universal DC plug fits for 2.5 mm / 3.5 mm / 4.0 mm
- 3 universal DC Plug sizes
- Plugs into most electronics jacks (requiring input less than 5.6V / 800mA)
- Serves many charging purposes
- Easy to use
[ JAVOCharger (Car)] - A USB Car Charger Adapter that is sturdy, lightweight and compact
- USB Car Charger Adapter Voltage Input - 12-24Vdc / Voltage Output - 5.2Vdc, 850mAH
- Safely and speedily charges your device
- Plug in any car's cigarette lighter for power (Fits in any car, boat, or RV lighter)
- Easily portable - if you forget to charge your device at home, Javoedge's USB Car Charger is there to give your device's battery a boost.
[ JAVOCharger (Wall)] - A USB Travel Charger Adapter that is sturdy, lightweight and compact
- USB Travel Charger Adapter Voltage Input - 12-24Vdc / Voltage Output - 5.2Vdc, 850mAH
- Safely and speedily charges your device
- Easily portable - Eliminates the need to travel with your device's recharging cradle
[ USB Extension Retractable Cable ] - USB Type A Male to Type B Female extension cable
- Multi-usages
- Extends the USB Bus Signal
- Works together with Standard USB Cables or USB DC Plug Adapter
- Cable must be plugged directly into a USB Port.
- Sturdy and high quality cable
$48.75
Click here for more information
USB DC 3-Way Adapter plus USB Extension Cable
Key Features
- Universal USB DC Plug in 3 sizes for different device requirements - Perfect for charging device with 2.5mm, 3.5mm, 4.0mm DC plugs such as Bluetooth Headsets, Cell Phones, Digital Cameras, PDA, and Portable devices.
- 5 feet (153cm) USB Extension Cable (AM-AF) – Also great for extending USB devices such as printers, modems, scanners, digital cameras, etc..
- Great traveling Kit & rolls up with a Velcro Strap for easy storage
- Easy to use and works with all compatible JAVOSync cables
$7.99
http://tinyurl.com/6tlpo

MHL cables with no micro-usb?

I'm looking to buy a MHL cable, so I've been browsing ebay.
I found this one which is nice because its length (4 meters, 13 ft) allows me to be on the couch while having full access to the phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The problem is, my TV doesn't has an USB port, and I don't see any micro-USB female port on that cable.
Am I buying a crippled/broken cable or am I missing something here?
I've seen other MHL cables (3 meters, 10 ft), which look like they have a female micro-USB port (for connecting either the power or the USB cable)... the problem is that they ship from Hong Kong... which takes a whole month to arrive!

1 for phone (micro-USB male), 1 for power/charging (USB Male) and 1 for HDMI port in TV.

I bought this cable and it works perfectly. So I have near TV laptop with USB

HDMI to RCA
Guys will this cable work?
http://www.ebay.in/itm/Black-5FT-Fe...CD_LED_Plasma_Televisions&hash=item3f1f7cc5e9

does not work....

akirayjin said:
1 for phone (micro-USB male), 1 for power/charging (USB Male) and 1 for HDMI port in TV.
Click to expand...
Click to collapse
That's rigth, the MHL cable needs a power connection, in this case is using the USB connection to do that, the MHL Samsung Original cable needs to connect the AC Adapter or USB cable to works.
You has to have a PC near to connect maybe.

it is simple, really. mhl needs a connected charger.
the cable suggested in the OP seems to be layout to use a tv's usb port, so the power supply will be at the end which also has the hdmi port.
the regular mhl cables, like the samsung original one, are just an 8" cable with required power supply via micro usb (female) at the end of the phone. pro: it also comes with a female hdmi port, so you can vary the length of the cable to match your usage profile, while the other one is fairly hard to extend.
either way, you will need a power supply, either on the side of the phone, or near the tv.
PS: have you thought about using an AC usb power connector for the power supply of the cable in post #1. these are fairly common, cost no more than 1$, and i assume, there is a power outlet near your tv.

HDTV - MHL to HDMI - Galaxy S2
Hello Guys,
i have bought the original Samsung HDTV cable(micro USB to HDMI) and everything appears working good, but suddenly while any video is running on my LCD LG 37LG50 37" TV the image showing just disappear. The screen TV turn off and to recovery video i need to turn off/on TV.
This is a random event and i don´t know what to do anymore. Any idea?

_LVEIGA_ said:
Hello Guys,
i have bought the original Samsung HDTV cable(micro USB to HDMI) and everything appears working good, but suddenly while any video is running on my LCD LG 37LG50 37" TV the image showing just disappear. The screen TV turn off and to recovery video i need to turn off/on TV.
This is a random event and i don´t know what to do anymore. Any idea?
Click to expand...
Click to collapse
What ROM are you using it? Just the Stock ROM has a complete and Working TvOut app. Could be the app too. Can you tell us which app are you use it?

Self made smart dock for galaxy s3

Hi guys. this is an update of my previous post. http://forum.xda-developers.com/showthread.php?t=2142357
Before, I made the connector to work as smart dock.
http://www.youtube.com/watch?v=EFzX6NlKJBU&feature=youtu.be
And now I tried to make it little more compact, avoid extra connections, make it easy to use. View attachment 1882279
I wanted only one cable will come from the phone and to do so i needed 1 cable that contains 8 wires, but I couldnt find any round cable that has 8 wires in it. at last i cut my hdmi cable !! :cyclops:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
there were about 13 or more wires in it, so i cut little part from the cable. You can order a cheap hdmi cable and cut it if you want.
(( After cutting the part I joint it bk and put some glue so the wires stay separate from each other. Then I covered it with some tape and more glue outsideof the cable :laugh:
now hdmi cable is working fine too :silly: ))((skip if you dnt want to reuse the hdmi cable))
Now comes the hard part. I soldered 8 wires as shown in the diagram, and made a hole on the 5 pin to 11 pin tip, and placed the cable as in picture and closed it .after that its pretty easy. Just connect wires with a micro usb cable as shown in diagram. I connected the usb hub instead of usb female port in the diagram. And the usb hub had enough space inside to put all the joints in .I just had to make another hole in usb hub to take out the micro usb for mhl cable
So total cost of making this dock was around 20 to 25 $ ( including mhl adapter and usb hub)
http://www.ebay.com/itm/Micro-5-Pin...106400?pt=PDA_Accessories&hash=item2c6d0ca5a0
http://www.ebay.com/itm/USB-2-0-A-fe...-/270798436083
http://www.ebay.com/itm/True-High-S..._USB_Cables_Hubs_Adapters&hash=item3f1ade6743
http://www.ebay.com/itm/25pk-40-2K-...466?pt=LH_DefaultDomain_0&hash=item564c6ff67a
http://www.ebay.com/itm/Premium-1-3...508585?pt=PDA_Accessories&hash=item43ba4e64a9
http://www.amazon.com/dp/B00AQ1W77C/ref=pe_175190_21431760_3p_M3T1_ST1_dp_1

Just awesome! !!
Again Excellent work bro!!!
Just awesome and smart work! !
Keep it up!!

necomer said:
After cutting the part I joint it bk and put some glue so the wires stay separate from each other. Then I covered it with some tape and more glue outsideof the cable :laugh: now hdmi cable is working fine too :silly:
Click to expand...
Click to collapse
I'm just trying to keep these steps clear in my mind...is the above step just so you can reuse the HDMI cable you had cut the section out of? It has nothing to do with the actual dock, right?

troycarpenter said:
I'm just trying to keep these steps clear in my mind...is the above step just so you can reuse the HDMI cable you had cut the section out of? It has nothing to do with the actual dock, right?
Click to expand...
Click to collapse
Yeah. You are right. I just did that so I can reduce extra cables. You can skip that part if extra cables dont bother you
If you dnt want to reuse the cable. ... just through it or keep it to use in something else
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

What about the 40.2K resistor? where did you put it?

syfxever said:
What about the 40.2K resistor? where did you put it?
Click to expand...
Click to collapse
Did you see the diagram ? You can get idea from there.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

wow

very nice... thanks for the DIY :good:

Great Job
You built a cool little adapter for yourself, I'm looking into doing something like this but I need help because I want to add charging on top of everything else you can do with the dock you made.
Have you looked into charging at all? or tried it yourself?

MHL 2.0 Adapter for S4, compatible with S III and Note II

just saw this news from gsmarena
and the happiest is below word
so it’s backwards compatible with MHL 1.0 devices like the Galaxy Note II and Samsung Galaxy S III.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
from the adapter picture, I only show the HDMI port and microUSB port, how to charge ??
the microUSB port suppose plug into phone @@
Source
1. http://blog.gsmarena.com/heres-the-...id/?utm_source=twitterfeed&utm_medium=twitter
2. http://www.phonearena.com/news/Sams...ilable-no-need-for-a-separate-charger_id41948
3. http://blog.clove.co.uk/2013/04/16/...tm_campaign=samsung-galaxy-s4-hdmimhl-adapter

MsElise said:
just saw this news from gsmarena
and the happiest is below word
from the adapter picture, I only show the HDMI port and microUSB port, how to charge ??
the microUSB port suppose plug into phone @@
Source
1. http://blog.gsmarena.com/heres-the-...id/?utm_source=twitterfeed&utm_medium=twitter
2. http://www.phonearena.com/news/Sams...ilable-no-need-for-a-separate-charger_id41948
3. http://blog.clove.co.uk/2013/04/16/...tm_campaign=samsung-galaxy-s4-hdmimhl-adapter
Click to expand...
Click to collapse
have you had any experiences with the other adaptor? if so, how was it?

You can see the port to put your charger into on the picture. Its on the main MHL part parallel to the part that plugs into the phone.

MsElise said:
just saw this news from gsmarena
and the happiest is below word
from the adapter picture, I only show the HDMI port and microUSB port, how to charge ??
the microUSB port suppose plug into phone @@
Click to expand...
Click to collapse
MsElise,
1. The Micro USB "PLUG" to plug into your Galaxy S3/S4/Note2.
2. MHL 2.0 enabled 5V 0.9A current so it does require additional charger to plug in.
3. The other Micro USB "PORT" can use for charging your galaxy devices.

NewForce said:
MsElise,
1. The Micro USB "PLUG" to plug into your Galaxy S3/S4/Note2.
2. MHL 2.0 enabled 5V 0.9A current so it does require additional charger to plug in.
3. The other Micro USB "PORT" can use for charging your galaxy devices.
Click to expand...
Click to collapse
,, it's posible to use usb port as , usb mass storage? ? ??

[Q] Galaxy S4 Car Dock going to work with HTC One?

I purchased the iBolt XProDock for my Galaxy S4 and it works fantastically. I just got off of the phone with Verizon and they are swapping out my S4 to a HTC One due to on going issues I've been having. I have been looking at cases and what not for the phone and realized that I have the car dock that I use regularly since I travel quite often for work. I know the phone will physically work with the dock as far as fitting, but I am curious if the cabling will work. It is the same micro usb connection so I know it will fit, but I am wondering if it will put the phone in "dock" mode like it did on the Samsung? The cable I got also has the headphone jack on the other end for connection to the aux port in the car. Does the HTC One support audio out through the USB port like the S4?

It supports audio through the usb but you need an otg or whatever it's called cable.
Sent from my HTC6500LVW using Tapatalk

Dark Jedi said:
It supports audio through the usb but you need an otg or whatever it's called cable.
Sent from my HTC6500LVW using Tapatalk
Click to expand...
Click to collapse
I have basically that cable (I think) that is a part of the iBolt dock. It takes it from micro-usb male to mini-usb female. Basically the same cable the iBolt dock uses. Only different is it has clip points to connect it to the back of the dock and it is rigid so it can be shaped and held in proper place for connection to the phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then that cable connects to a male mini-usb that has a male usb and male mini-plug (head phone jack).
I'm assuming this will work once I get the correct cable (first image) that will put the phone in dock mode. The current cable is for my old S4 and it put the phone in dock mode and supported audio thorugh USB output.
Just as a side note, can you show a picture of the cable your taking about?

Why not just search USB OTG cable?
Sent from my HTC6500LVWBLU using Tapatalk 4
If I've helped, please hit the thanks button