Related
I've been on nightly CM10.1's forever, but recently decided to try the unofficial CM-10.2, specifically the 8/3 update. I actually had the original release for a while as well and it was fine. However, as soon as I installed the 8/3 release, my phone started acting up. First of all, I lost root. Second, my Gmail app disappeared. Then, Google Play would open, but never connect to the internet (constant "Retry" button on the screen). So I decided to try the S3 Toolkit to reroot. No luck. ADB could see my phone, but the toolkit would stay waiting for USB debugging to be enabled and not go past that. I read somewhere this is because of a new security feature in 4.2.2. At that point, I figured I'd ODIN back to stock and start over.
I got ODIN 3.07 and the stock AT&T DLK3 ROM. I made sure only Auto-Boot is enabled and I only adding the ROM tar.md5 file through the PDA button. The process takes a few minutes and completes successfully (PASS, 1 successful/0 failed), but when the phone comes up, I get the Galaxy S III logo, then the AT&T splash screen and chime, but it never goes past the blinking SAMSUNG logo. And by never I mean I've even left it overnight and it's in the same place in the morning.
I've tried flashing more than once. I even tried another ROM I got from another thread I can't find right now, all with the same result.
Anything else I can try at this point? The phone is definitely not bricked, since it's on, updates, etc.
Thank you.
Manually boot into recovery, do a factory reset
mrhaley30705 said:
Manually boot into recovery, do a factory reset
Click to expand...
Click to collapse
What would I do without this forum and experts like you?
That did it. 1000 thanks!
So, at the risk of posting too much info (instead of not enough) I'm going to start at the beginning:
I rooted my wife's S3 and loaded TWRP and Paranoid Android. It ran fine, but there was a camera issue, so she wanted me to restore it to the stock ROM. I did this (to 4.1, I believe, whatever was out in August). Again, it ran fine and I was planning to restore the root access, but did not.
Later, it was dropped in Hibachi sauce (not sure this is relevant, but in case) and we put it immediately in rice. It worked fine, other than the touch screen intermittently ceasing to receive touch commands.
When the updated ROM came from Samsung, my wife installed the update and the phone continued to work fine, other than the screen issue.
She was tired of the issue and decided to sell it to buy an iPhone (shudder) so she did a factory reset. This is where the issues began (I included the previous steps as I'm not sure which may have caused the current issue).
Upon the factory reset, the phone would only boot to the beginning of the AT&T logo loading. I thought it may be something she could fix through Kies and suggested she try that, so she did. The phone would then boot to a screen in Odin mode that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." We did this and there was no help.
I can get it to boot into recovery (the default one now) and have tried to reflash that and the stock ROM that I did previously and only can get two actions: either the freeze at the AT&T logo (if I use Odin to flash the ROM) or the above message in Odin mode (after trying to fix from Kies).
I'm not sure what to do at this point and would appreciate any and all help you guys can provide. I've lurked around and learned quite a bit to flash my ROM and my wife's from you guys, so I'm really hoping I can learn more from this.
Thanks in advance!
Fearborn said:
So, at the risk of posting too much info (instead of not enough) I'm going to start at the beginning:
I rooted my wife's S3 and loaded TWRP and Paranoid Android. It ran fine, but there was a camera issue, so she wanted me to restore it to the stock ROM. I did this (to 4.1, I believe, whatever was out in August). Again, it ran fine and I was planning to restore the root access, but did not.
Later, it was dropped in Hibachi sauce (not sure this is relevant, but in case) and we put it immediately in rice. It worked fine, other than the touch screen intermittently ceasing to receive touch commands.
When the updated ROM came from Samsung, my wife installed the update and the phone continued to work fine, other than the screen issue.
She was tired of the issue and decided to sell it to buy an iPhone (shudder) so she did a factory reset. This is where the issues began (I included the previous steps as I'm not sure which may have caused the current issue).
Upon the factory reset, the phone would only boot to the beginning of the AT&T logo loading. I thought it may be something she could fix through Kies and suggested she try that, so she did. The phone would then boot to a screen in Odin mode that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." We did this and there was no help.
I can get it to boot into recovery (the default one now) and have tried to reflash that and the stock ROM that I did previously and only can get two actions: either the freeze at the AT&T logo (if I use Odin to flash the ROM) or the above message in Odin mode (after trying to fix from Kies).
I'm not sure what to do at this point and would appreciate any and all help you guys can provide. I've lurked around and learned quite a bit to flash my ROM and my wife's from you guys, so I'm really hoping I can learn more from this.
Thanks in advance!
Click to expand...
Click to collapse
So is it stuck on the AT&T Logo? Or Samsung Logo?
UnknownTroll1 said:
So is it stuck on the AT&T Logo? Or Samsung Logo?
Click to expand...
Click to collapse
It was the AT&T logo, it's currently the Odin. If I flash it again with the stock ROM, it'll be the AT&T logo again, but it doesn't completely load the AT&T logo. The Samsung one loads and then the AT&T starts to load, but doesn't finish playing.
Anyone?
Yes, Odin to stock unrooted, then go ahead and factory reset by holding volume up + home button on first boot. Done.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
jblparisi said:
Yes, Odin to stock unrooted, then go ahead and factory reset by holding volume up + home button on first boot. Done.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
If this works (I'll try it when I get home) I will be so grateful! BTW, do you happen to have a decent link to a stock ROM? If not, I'll Google it tonight.
Hi all. I'm in a real pickle here and hoping someone can tell me how to get out of this mess. It's a bit of a long story, but I'll summarise as best I can.
I've had my Galaxy Note 2 LTE (N7105) for a year and I rooted it pretty much the day after I got it. I'm not new to rooting at all (fourth Android device since 2010, all rooted), but I still feel like a noob at times. Over this 2014 Easter period I had time off so I decided to change ROMs.
I was previously using CM 11, which I had been using pretty much since I rooted. And I had updated CM at least once a month, sometimes more frequently. So I was looking for some new ROMs, downloaded about 5 and tried them out. The last two I tried was OmniROM (a 4.4.2 ROM) and CM 11 Remix (also a 4.4.2 ROM). I was using TWRP 2.7.0.2 to do the wipes, caches, flashes, etc. I had no issues flashing OmniROM, but when I flashed CM 11 Remix, I couldn't get in the first time. I was stuck in a boot loop. I pulled the battery, got back into recovery and tried flashing again. Still boot looping. I think the mistake I made was a Data Format. Either way, I finally got CM 11 Remix to load by first wiping, flashing the ROM, GApps, a sensor fix, a camera fix, Devil Kernel and then Super SU. However once in the ROM I was getting constant Google Play Store / Services FCs. Oh, and yes, I went through the typical brand new Android setups, entering my Google account and so on... I found that if I cleared data / caches on both Google Play Store app and Google Play Services app, it gave me temporary joy but as soon as I tried to download any app in Google Play I'd get the FC. Also, my signal was totally gone. I tried flashing back to OmniROM as it was my last known good and working ROM, but now that was boot looping. I even tried some of the other ROMs from that bunch I had, including AOKP. All would boot loop.
So after much trying different GApp packages, I decided to best thing to do would be restore it to stock, root again, then go for the custom ROM (hopefully CM 11 Remix) from a nice clean slate. So I did this. I downloaded the Android 4.3 stock ROM from SamMobile here. Installed Odin 3.07, then loaded it up and flashed the stock ROM. All seemed to go great, but when the ROM was done and phone rebooted, I get stuck in another boot loop! This time at the white "Samsung" logo with the glowing blue edges. Not the model number screen. Also my LED light is on blue, if that means anything.
So I found this thread (post at top of page) which suggests I need to flash the PIT file during the stock ROM installation with Odin. So I found the PIT file here, and I'm ready to flash this along with the stock ROM... HOWEVER, I read something somewhere (can't find it now) that implied if I'm on Android 4.3, flashing a PIT is a bad move. Can anyone comment on that? I guessing since the stock ROM is 4.3, I'm technically on 4.3 (even though I can't get into it).
Or if anything else I'm doing immediately stands out as a seriously stupid move, please let me know. I've been without normal use of my phone for a couple days now and ironically I'm at the point where I'm considering going without a phone for the rest of my life... LOL! AS IF I COULD!
Anyways, any help will be much appreciated!
EDIT: I just realised I should have posted in Troubleshooting, not General Questions... If mods want to move this, please do.
i just suggest that you flash the stock odin without the pit and see if its working out or not. sometimes playing with pit files can screw up your device even more...
btw... next time you play flashing... i'm suggesting you make a backup of your working custom. its will save you lots of time if this kind of problem happen.
edan1979 said:
i just suggest that you flash the stock odin without the pit and see if its working out or not. sometimes playing with pit files can screw up your device even more...
btw... next time you play flashing... i'm suggesting you make a backup of your working custom. its will save you lots of time if this kind of problem happen.
Click to expand...
Click to collapse
I don't have any working ROM. All I have now is a boot loop.
invertedskull said:
I don't have any working ROM. All I have now is a boot loop.
Click to expand...
Click to collapse
I had a problem with my device where I was stuck at boot loader as well, but it was from the rar file of the rom(cm 11) cause I tried downloading it again and it worked.
I suggest you prepare Odin and the stock firmware, wipe factory/cache dalvik, system (advanced), then flash stock firmware, to bring everything back to normal.
Banutu said:
I had a problem with my device where I was stuck at boot loader as well, but it was from the rar file of the rom(cm 11) cause I tried downloading it again and it worked.
I suggest you prepare Odin and the stock firmware, wipe factory/cache dalvik, system (advanced), then flash stock firmware, to bring everything back to normal.
Click to expand...
Click to collapse
Hmmm, I'm not stuck at boot loader, just boot loop. Maybe you meant that?
To clarify, all I can do now is...
1. Boot normally and end up in a boot loop (at "Samsung" white logo with glowing blue edges).
2. Boot into Download mode and from there I can use Odin to flash / install.
3. Boot into stock recovery, which I've never used before (only ever used custom recovery).
I've prepped Odin again, ready to flash the stock firmware, but I've never done a wipe / factory reset with Odin. I don't see any Advanced settings? Did you mean I can do it elsewhere? Cos I see I can do wipes / factory reset from stock recovery.
So should I do that AND then go into Download mode and flash stock firmware with Odin?
invertedskull said:
Hmmm, I'm not stuck at boot loader, just boot loop. Maybe you meant that?
To clarify, all I can do now is...
1. Boot normally and end up in a boot loop (at "Samsung" white logo with glowing blue edges).
2. Boot into Download mode and from there I can use Odin to flash / install.
3. Boot into stock recovery, which I've never used before (only ever used custom recovery).
I've prepped Odin again, ready to flash the stock firmware, but I've never done a wipe / factory reset with Odin. I don't see any Advanced settings? Did you mean I can do it elsewhere? Cos I see I can do wipes / factory reset from stock recovery.
So should I do that AND then go into Download mode and flash stock firmware with Odin?
Click to expand...
Click to collapse
ohhh my bad, I meant boot loop (stuck at samsung logo), mine was stuck there but then after it restarts and goes into recovery mode
do these following steps and you should be fine with your device.
1. Go into recovery mode
2. Wipe factory/reset
3. Wipe cache
4. Wipe dalvik
5. Advance > format/system
Now you have no rom or any OS to load,
1. Power off the device
2. Open Odin on your PC(right click run as administrator)
3. power on your note in Download Mode
4. Connect your device to your PC via USB
5. odin should recognize your device, something blue like " ID" or something there, you should be familiar with that.
6. click PDA, and find the official stock firmware zip you got it from samsung website, and make sure it fits your device(for example if you have your note from italy you should have ITV)
7. Hit Start and it should finish in 5-10 minutes.
Its the cleanest way with Odin, I did some crap on my device and that's how I return it to normal.
Banutu said:
ohhh my bad, I meant boot loop (stuck at samsung logo), mine was stuck there but then after it restarts and goes into recovery mode
do these following steps and you should be fine with your device.
1. Go into recovery mode
2. Wipe factory/reset
3. Wipe cache
4. Wipe dalvik
5. Advance > format/system
Now you have no rom or any OS to load,
1. Power off the device
2. Open Odin on your PC(right click run as administrator)
3. power on your note in Download Mode
4. Connect your device to your PC via USB
5. odin should recognize your device, something blue like " ID" or something there, you should be familiar with that.
6. click PDA, and find the official stock firmware zip you got it from samsung website, and make sure it fits your device(for example if you have your note from italy you should have ITV)
7. Hit Start and it should finish in 5-10 minutes.
Its the cleanest way with Odin, I did some crap on my device and that's how I return it to normal.
Click to expand...
Click to collapse
All good! Cheers man!
I actually went ahead and booted into stock recovery and did the factory reset and partition wipe before I saw your post. And the stock firmware I'd flashed with Odin previously is now booting and I'm finally back in!!! WOOOOOOOOO!!!
Just need to root this bad boy and get back to a nice shiny custom ROM.
Thanks for the advice everyone!
invertedskull said:
All good! Cheers man!
I actually went ahead and booted into stock recovery and did the factory reset and partition wipe before I saw your post. And the stock firmware I'd flashed with Odin previously is now booting and I'm finally back in!!! WOOOOOOOOO!!!
Just need to root this bad boy and get back to a nice shiny custom ROM.
Thanks for the advice everyone!
Click to expand...
Click to collapse
I'm glad to hear that man, peace ^^
Banutu said:
I'm glad to hear that man, peace ^^
Click to expand...
Click to collapse
I have another hurdle... Some built in security is stopping SuperSU from running. It's not Knox, but something like it. I get this error message:
"Unauthorized access to a secured area has been blocked. Tap here for more info."
How can I disable this? I've searched on Google already but so far nothing is helping and I can mostly only find info about Knox...
EDIT: It was goddamn Knox all along... And I just disabled it by means of SuperSU. Finally!
invertedskull said:
I have another hurdle... Some built in security is stopping SuperSU from running. It's not Knox, but something like it. I get this error message:
"Unauthorized access to a secured area has been blocked. Tap here for more info."
How can I disable this? I've searched on Google already but so far nothing is helping and I can mostly only find info about Knox...
EDIT: It was goddamn Knox all along... And I just disabled it by means of SuperSU. Finally!
Click to expand...
Click to collapse
Lolol, see your finding your way on your own ^_^, I was about to give you this link and suggest you to read the comments as well
http://www.w0lfdroid.com/2013/12/Fix-Root-Problem-on-Android-4.3-for-Galaxy-S3-S4-Note2-Note3.html
Unfortunately for me I don't have Note 2 =(, I have an S II Plus, I hope to get Note 2 next month can't wait =S
Banutu said:
Lolol, see your finding your way on your own ^_^, I was about to give you this link and suggest you to read the comments as well
http://www.w0lfdroid.com/2013/12/Fix-Root-Problem-on-Android-4.3-for-Galaxy-S3-S4-Note2-Note3.html
Unfortunately for me I don't have Note 2 =(, I have an S II Plus, I hope to get Note 2 next month can't wait =S
Click to expand...
Click to collapse
Heh, yeah, all is well in my world once again!
The Note 2 is a great device man. I am sure you'll love it. The Note 3 looks great also, but I don't like the ribbed sides (I'm fussy) and last I read there's an eFuze that goes off once rooted or something along those lines. That's sh!t.
invertedskull said:
Heh, yeah, all is well in my world once again!
The Note 2 is a great device man. I am sure you'll love it. The Note 3 looks great also, but I don't like the ribbed sides (I'm fussy) and last I read there's an eFuze that goes off once rooted or something along those lines. That's sh!t.
Click to expand...
Click to collapse
What do you think about the new oneplus one, do you think I should get that instead?
Sent from my GT-I9105P using Tapatalk
Banutu said:
What do you think about the new oneplus one, do you think I should get that instead?
Sent from my GT-I9105P using Tapatalk
Click to expand...
Click to collapse
Hmmm, I haven't seen that one... Feel free to PM me a link.
Help Me!
Banutu said:
I'm glad to hear that man, peace ^^
Click to expand...
Click to collapse
My case is the same case of Invertedskull. I already did all steps as you instructed. I wiped data/cache/system and flash a stock room 4.4.2 of Nordic Rom on SamMobile website.
After flashed, the looping still happens. When I put the charger, the looping stops and goes to the main screen normally. Sometimes, it suddenly restarts but not frequently.
OMG! How to stop it. Pls help me.
My Note 2 is N7105 LTE - Optus (Australia)
mroldman281 said:
My case is the same case of Invertedskull. I already did all steps as you instructed. I wiped data/cache/system and flash a stock room 4.4.2 of Nordic Rom on SamMobile website.
After flashed, the looping still happens. When I put the charger, the looping stops and goes to the main screen normally. Sometimes, it suddenly restarts but not frequently.
OMG! How to stop it. Pls help me.
My Note 2 is N7105 LTE - Optus (Australia)
Click to expand...
Click to collapse
If you have access to anything, and don't get JUST the boot loop, then you DO NOT have the same case I was in. You are probably able to recover from this. Try posting on the Tf Forums. The guys over there are "specialists" in Asus Tf tablets, and as you'll see on this thread (http://www.transformerforums.com/fo...-boot-loop-after-doing-routine-cm-update.html), they gave me a lot of help. Not that I was able to recover, but they were awesome dudes.
mroldman281 said:
My case is the same case of Invertedskull. I already did all steps as you instructed. I wiped data/cache/system and flash a stock room 4.4.2 of Nordic Rom on SamMobile website.
After flashed, the looping still happens. When I put the charger, the looping stops and goes to the main screen normally. Sometimes, it suddenly restarts but not frequently.
OMG! How to stop it. Pls help me.
My Note 2 is N7105 LTE - Optus (Australia)
Click to expand...
Click to collapse
mroldman281, You didn't post again, so I don't know, If You found solution, but since I had same simptoms, and after four days of reinstalling different stock roms, wiping and even messing with PIT via Odin etc..I can say, that in my case the reason for boot loop was faulty battery. The phone worked when it was plugged in and restarted soon after i unplugged USB cable, and just lopped afterwards. Replacement battery put everything back in order. And I am one happy Camper!
Hope this info helps someone else with boot loop problem
same problem stuck in bootloop
hey guys i have the same problem bootloop all the time i tryied stock firmware but nothing happend avec i rooted my note 2 and intalled a costom recovery and a many roms but stuck in bootloop i didn't chage baterry , by the way i wiped cache and reset factory and clear dalvick cache but the same always bootloop
what u suggest i do
ps : i can acces to bootloader or download mode it charge normally
woow get back my note 2 lte alone
hey guys i get back my note 2 i don't know how but it was a succes :victory:
first : i tried so many afficial firmware 4.4.2 and costom roms but didn't change the problem of bootloop
then i remembred what version i was in it was 4.1.1 so i download it from sammobiles thenks to them flash it and boooom the note 2 lte start like a charm
i want to thanks everyone for their help even if they didn't help directly but this past 3 days i read almost all the threads about note 2
well i thinks one of the selutions here is to revert back the the original stock firmware like i did so maybe will fix the bootloop
Hello everyone,
yesterday I flashed a new Cyanogenmod 14 nightly (12062016) for my G4 from earlier nightly in TWRP. After reboot the phone keeps going back to TWRP and I can't seem to get it to boot to system..
I tried factory reset, reflashing back to old nightly, flashing stock.. but nothing seems to work.
Also tried doing this in the TWRP terminal:
dd[space]if=/dev/zero[space]of=/dev/block/platform/f9824900.sdhci/by-name/fota
Didn't fix the loop, I guess because it wasn't the OTA update that caused the problem in the first place.
If anyone has an idea, I would greatly appreciate the help!
Thanks.
If you can reach download mode you could try reflashing back to stock then starting again.....Hope you get yours fixed - Sorry to say this but mine did a very similar thing only 24 hours before you posted!!! Only mine was on stock FW and was in use at the time - I've now had to swap it as valuebasket who sold me the phone have ceased trading. If yours is a UK model you may be able to get it replaced under warranty - believe that LG guarantee their phones for 2 years and a ruling by the European court said that flashing a custom rom doesn't invalidate any warranties.
I have the same exact issue, I also flashed the latest CM14 nightly and cannot get the device to boot any rom.
I have even tried flashing stock rom but I get the same problem.
From what I have read, the bootloop issue happens once the device boots but I don't seem to be getting that far.
Any ideas?
Ran into the same problem 3 days ago. This is the first time I have encountered a non-revertible issue in 3 years as a cyanogenmod user. This changes my opinion on how safe it is to make use of a custom ROM. I tried to wipe everything, reinstall TWRP, change TWRP with another recovery, reinstall a safe NAND backup of mine.....nothing.....it went into boot loop. Before I read this post, I was convinced my phone encountered the infamous G4 bootloop problem.....now I see there are other examples, so it shouldn't be the case. Long story short, I had to check my device in at the LG assistance, with 25 days as time forecast.
The guilty nightly was 20161205.
I have never seen anything like this...
This has solved it for me - I installed LG Bridge and flashed the factory firmware using the tool. Now it seems I'm back on stock but at least it's working.
got mine working. I had to install LGUP and flash stock ROM. Once flashed I installed CM14 and I am back up and running again.
I tried LGUP but it could not recognize the device while this was looping.....a bad experience......
I have the same issue. My phone was updated to 20i via the original stock firmware, then I put twrp 3.0.2-0 and cyanogenmod on. I did a cyanogenmod update from within cyanogenmod, which just booted into twrp, then I manually installed the update zip that cyanogenmod had downloaded, then it always boots into twrp. I wonder if initiating the update from within cyanogenmod was the cause. The phone is not detected by LGUP or LG Bridge. I've tried this on a win10 machine, and a win7 vm from linux. I have access to twrp, and download mode by doing the reboot into bootloader from within twrp.
If those people who have fixed this could give more details about how they did it, that would be good. What exact steps did you take? What stock firmware version did you have before installing a custom rom? What OS version were you using? What twrp version?
Well. Mine got stuck in bootloop for the second time today. What is going on? In between the two bootloops I had one good update with CM. Using TWRP 3.0.2.1. Steps to reproduce failure: updating CM from within CM, it autoreboots into TWRP and after that nothing happends, no autoinstall. Then after a manual install of the new CM the bootloop starts.
Resolve the problem:
* Install LGUP 8994 DLL Ver 0 0 3 23, Install LGUP Install Ver 1 14, get the latest KDZ
* Get the phone into download mode with usb cable and after that in firmware update mode
* Startup LGUP and choose refurbish and select the kdz file.
* After that you can boot into your stock LG firmware again, reinstall TWRP an CM. If you want so.
Read that it is advised to manual update cm from within TWRP. TWRP will get an update in the future to solve this bootloop problem.
iankelling said:
I have the same issue. My phone was updated to 20i via the original stock firmware, then I put twrp 3.0.2-0 and cyanogenmod on. After a cyanogenmod update, it always boots into twrp. The phone is not detected by LGUP or LG Bridge. I've tried this on a win10 machine, and a win7 vm from linux. I have access to twrp, and download mode by doing the reboot into bootloader from within twrp.
If those people who have fixed this could give more details about how they did it, that would be good. What exact steps did you take? What stock firmware version did you have before installing a custom rom? What OS version were you using? What twrp version?
Click to expand...
Click to collapse
I second that. Same issue and neither LG Up nor LG Bridge will recognize my device. Looking in device manager there are no serial interfaces. Do I need a special driver that provides a com port for a phone in recovery or fastboot mode?
---Edith 2016-12-12: Found a solution for my issue:
The phone has to be in _download_ mode, not in recovery or fastboot. After realizing that I have to boot the phone in a different manner, it will be recognized by LG UP.
Here is how to boot the pone in download-mode:
- Power off your LG device.
- Press and hold Volume Up button.
- Connect your device to PC with a USB cable while holding the Volume Up button.
- You’ll boot into download mode with “Firmware Update” written on top of the screen.
Now everything is fine again.
croclacrimae said:
Hello everyone,
yesterday I flashed a new Cyanogenmod 14 nightly (12062016) for my G4 from earlier nightly in TWRP. After reboot the phone keeps going back to TWRP and I can't seem to get it to boot to system..
I tried factory reset, reflashing back to old nightly, flashing stock.. but nothing seems to work.
Also tried doing this in the TWRP terminal:
dd[space]if=/dev/zero[space]of=/dev/block/platform/f9824900.sdhci/by-name/fota
Didn't fix the loop, I guess because it wasn't the OTA update that caused the problem in the first place.
If anyone has an idea, I would greatly appreciate the help!
Thanks.
Click to expand...
Click to collapse
I was able to get out of that by also wiping by-name/misc. Don't do that, though, because then your wifi mac address will get messed up and you'll spend all day looking for a permanent fix for that.
I suggest reflashing a stock KDZ using LGUP, as others have said. You can get the usb drivers from LG Bridge.
I will release a fix for that soon. Check the twrp thread for updates on this.
Hi
I also have this problem
I installed cm-14.1-20161201-NIGHTLY-h815 successfully and was running it for almost 2 weeks without issues, today I updated to cm-14.1-20161213-NIGHTLY-h815 from cmupdater and I have been ending up in recovery every time I rebooted.
I tried flashing the latest cm recovery and reflashing the rom, with full wipes but no luck.
Full steps of recovering would be appreciated (for example, there are comments about flashing the latest stock rom, but a link to this rom would be helpful)
Thanks
Good news regarding this:
http://forum.xda-developers.com/showpost.php?p=70082901&postcount=213
The above will fix TWRP bootloop issues as well and I also released a first h811 version which should allow installing CM etc as it should.
Keep in mind that this is a BETA and not an official TWRP release.
Please report back in the above thread!
.
Does your twrp beta really fix the boot loop even it is already happening. What do I have to wipe? I have not managed to get out of the boot loop despite intalling it.
Is using using LG Up to flash to the stock rom really the only option?
Edited 2017-01-25 2:45 pm:
Well, sometimes you just have to be patient. Powered down the phone and when th H815 restarted CM did boot. Great. :good:
Hey, I just want to share a small detail, possibly a fluke that helped me overcome the bootloop.
So...I started with a fresh, stock H815, I don't quite remember the firmware version..it was something like version "20g"..
OK, I looked up several guides and tried to get the newest stable versions of each tool. I went through with the official bootloader unlock, then moved on to rooting: Kingroot didn't work for me so I went on installing twrp in fastboot mode so I could afterwards install supersu and root.
I got there eventually but first I was stuck in bootloop - kept ending up in twrp interface. I found the 2 dd commands but those didn't work for me as the msm_sdcc folder did not exist, but instead there was a "f9824900.sdhci". Tried to overwrite this one ...but as others have stated as well, it didn't work.
At that point, I had nothing to lose, I was starting to accept that I had soft-bricked my precious G4 so..I went on installing the DU 10.6 7.1.1 rom and the stock gapps, wiped dalvik, rebooted and held my breath...not literally
About 12 minutes later, after an endless red, spinning logo, my shiny ping pong paddle showed me a different screen, a fresh start welcome screen .
Almost 24h / 10-12 reboots (twrp included) / 70+ apps installed and removed later, the new OS holds around 2G ram average, a bit better battery life, smoother transitions, flawless navigation, flush streaming over both 3G/LTE & 2.4/5 G wifi.
FYI the reboots were intended, wanted to see consistency in boots - we're in the green . Now testing long term stability with moderate/high usage.
There is 1 aspect I noticed, there are a couple of contexts when the interface burps (several menus, various situations, never in apps) and resets back to homescreen...but I think that's more of a launcher topic than an OS one.
Other than that, so far I'm happy with the mod.
Hope my experience helps others that might be in the same spot I was or at lest boosts their confidence to try out a decent idea they might be pondering.
Hi all,
I'm coming back to Android after an absence and would like to run Lineage on a new US unlocked 9P. I followed the directions in the Lineage OS website and unfortunately the phone now is stuck in a constant animation of the blue circle moving left over the arc, and there isn't much I think I will be able to do about it until the battery runs out.
Here's what I did as per the directions:
-got and installed adb and fastboot from the Windows zips from Google
-added the install location to the path enviro variable
-installed the Universal ADB driver from Github
-activated USB debugging and OEM unlocking on the phone
-got the phone repeatedly into fastboot mode but then got stuck since 'fastboot devices' didn't show anything
-got bailed out by another thread here that one needs to check for updates with phone connected and Win will download the relevant USB drivers. Thanks!
-unlocked the bootloader
-downloaded and flashed the 18.1-20210803 recovery img
-sideloaded the copy-partitions 20210323 zip and it got stuck at 47% just like the website said
-did the factory reset
-sideloaded the the LOS 2020210803 zip to the phone and rebooted
When I rebooted it just plays the animation I mentioned at the beginning, so it looks like it's stuck in a permaloop.
I should mentioned that after I flashed recovery and booted into the normal Oxygen mode it would take much longer to boot so perhaps there was something already creating the loop.
I am grateful for any assistance.
Thanks,
How long have you left it? First install of Lineage spins for ages
I think I left it for an hour or so. Thanks for the info - I just turned it on and will let it spin for a while and see what happens.
I let it run until the battery died. I fully recharged it and am letting it run again. Same result of blue circle tracing arc to the left.
Success!
I tried to install the prior version (0720) which was then rejected for being too old. I wiped the storage and then tried 0803 again and it installed. I turned it on, the circle moved for a while and then the Lineage logo came up. I just finished setup, and it looks beautiful.
So far so good!
lexcimer said:
Success!
I tried to install the prior version (0720) which was then rejected for being too old. I wiped the storage and then tried 0803 again and it installed. I turned it on, the circle moved for a while and then the Lineage logo came up. I just finished setup, and it looks beautiful.
So far so good!
Click to expand...
Click to collapse
Everytime you flash a new rom you need to wipe data after
Anytime that happens you just go back into recovery and wipe data a few times and it should work after that.
It would've been due to encryption. Each time you flash a new rom you need to wipe userdata which removes your lock and also removes encryption. If you try to install a rom without doing this first, the rom cannot access that partition, because it doesn't yet know the unlock code/pattern, which is why it just gets stuck trying to do so.
Thank you to the 3 posters above, and I appreciate DJ Sub's explanation, makes sense in hindsight and I'll keep it in mind for the future.
PS - I'm glad to be back to the Android modding community, it's refreshing to be able to steer what OS my phone is running
I had the same problem (also a couple of different boot loop problems) when flashing LineageOS.
I did many things, so can't say for sure which one helped me to fix that, but the things I did were:
Restore from boot loop via MSM tool flashing EU image.
Updating that OxygeneOS to the latest using internal updater.
Repeating the LOS installation process several times in different conditions to isolate the source of the problem. I was changing LineageOS package, OpenGapps package, etc.
One of the problems I've found was that latest OpenGapps package (July 28th if I'm correct) was causing the boot loop on first start (very similar to what you're describing):
Phone tries to boot showing the LOS animation.
It goes for several minutes.
Then the phone vibrates, reboots and it continues from the start.
If I'm not mistaken, it was fixed by using the version from July 24th. The latest package also were removed from the OpenGapps page later AFAIR.
Second problem was after the successful boot. The phone was rebooting from the first setup wizard, booting to recovery (or some other partition) and proposing to make a factory reset.
Not sure which of my steps solved this, but I was updating back to the last LOS package watching closely that I'm flashing the same slot on each step and also making sure that slots are properly copied from one to another with the corresponding script.
Even in the most stable setup I was probably having some setup wizard loop problems, so I was skipping account setup steps and doing that manually later.
I'd say that installing LOS on OnePlus 9 Pro was most difficult and problematic installation in my experience and I did that a lot previously: HTC Wildfire S, THL 5000, Zuk Z1, Xiaomi Mi 5s, Xiaomi Mi 9T (Redmi K20) and several other devices.