Hi!
does anyone else have this problem?
After moving from Miui 13 to 14, from time to time (at least 3x throughout the day), the smartphone keeps locking and unlocking the screen automatically, and I can only solve it by restarting the device.
Before I didn't need to restart the device for weeks...
Thanks a lot. =)
Locked or unlocked bootloader?
is recommended after a firmware upgrade to hard reset the device to avoid that kind of bugs
Ditto, backup all your stuff before doing so...
maybe the power button is broken
I always suggest not doing a upgrade but a clean instal , via recovery twrp , but if you did do just the OTA upgrade then I would suggest in a factory reset in any major update GL
Related
A fishy problem.
I'm stuck in bootloader when I restart the phone.
If I rest the phone for a couple of hours i starts as it should, but if i restart it will come into the bootloader and is stuk there.
I can restart as many times as I would like but still stuck. I cannot Hard reset since restarting means I'm in bootloader.
I have managed to connect it to USB port. Performing Task29 with MTTY.
I have reflashed simplicity:s ROM after task 29 with no luck. Still stuck in Bootloader when restarting. then I have to wait for 2 hour with battery disconnected and the phone can start.
anyone who knows how to fix this problem?
thanks
/Ulf
Try flashin a different rom.. go into the bootloader do a task 29, hold volume down after it finishes, but b4 it boots up to get into bootloader again them flash a rom..
Sent from my SPH-M910
Hi
Go www.htc.com, select your country (IMPORTANT STEP!!!), find downloads (should be somewhere at support), download official ROM (it require P/N code, you can find it under battery, important for check ROM compatibility), flash. Should work.
Hi guys thanks for input. I tried both of your solution, but it failed. I now have the official ROM (but not official Hard SPL) And I still have the same issue.
Anything else I can try with?
Look for locking up precedure and go to the vendor if the phone ha warranty.
Hi, I have a serious problem here and maybe somebody has an idea.
Recently i upgraded via provided OTA update to 9.5.4.0 and everything seem to work fine, but I did afterwards a factory reset (via the menu of the phone) to the device- Mi account was deleted and bootloader is locked.
So i didn´t play at all with the mobile before.
I already requested now (after the problem occured) the unlock of the bootloader and got the feedback of Xiaomi that i can use now the Unlocker tool.
Unfortunately the device needs to have an MI account binding to use the Unlocker tool.
After the factory reset the device starts from scratch and i get the famous MIUI9 beginning screen, can choose the language and the region. Then the device try approx. 30 times to continue and end always with a message (only for some seconds): "Find Device closed unexpectedly". After approx. 30 times im ending up in the MI-Recovery 3.0 where i can choose REBOOT, WIPE DATA, CONNECT WITH MI ASSISTANT (PC-SUITE)
REBOOT: will do again 30 times the message: "Find Device closed unexpectedly"
WIPE DATA: starts from the choose of language and region again and it doesn´t matter which language i choose ends up in the MI-Recovery 3.0
CONNECT WITH MI ASSISTANT: ends up with the english version, that i can´t connect, but with the Chinese version, i can at least open the downloaded ROM 9.5.4.0 and start the flashing process which hang up immediately and doesn´t go beyond 0%. It ends up with some chinese messages i can´t read
FASTBOOT could be reached by pressing Vol- + On/Off, but doesn´t help with a locked bootloader i guess
So if anybody have an idea how to overcome the situation it would be quite helpful.
Thx
I think you can flash fastboot miui rom with locked bootloader, just search the google for procedure, you would need to delete some lines in bat file for it to work. You will loose all data of the phone for sure, and you will need a miflash tool. After that you are good as new. It might be an issue that you have not enabled developer part. If this doesnt work, try to flash a recovery image via original recovery, i think i saw it somewhere ( cant post url)..
Yes, please share the link if possible, esp. the information about the BAT file, cause actually i searched since days and tried from MiFlash Tool until QFil everything.
I got developer part enabled before, but doing a reset to factory doesn´t allow me to re-enable anything.
How to flash something from original recovery, cause i´m not able to boot e.g. into EDL mode- I only can do something in FastBoot mode and meanwhile i´m a bit lost, cause i tried Recovery ROMS as well as FastBoot Roms and all of my flashing activities end up in the same scenario. Every flashing possibility i know is aborted.
Thx & cheers
Exact the same problem for me.
i have the same problem, some help would be great.
neo920768 said:
Hi, I have a serious problem here and maybe somebody has an idea.
Recently i upgraded via provided OTA update to 9.5.4.0 and everything seem to work fine, but I did afterwards a factory reset (via the menu of the phone) to the device- Mi account was deleted and bootloader is locked.
So i didn´t play at all with the mobile before.
I already requested now (after the problem occured) the unlock of the bootloader and got the feedback of Xiaomi that i can use now the Unlocker tool.
Unfortunately the device needs to have an MI account binding to use the Unlocker tool.
After the factory reset the device starts from scratch and i get the famous MIUI9 beginning screen, can choose the language and the region. Then the device try approx. 30 times to continue and end always with a message (only for some seconds): "Find Device closed unexpectedly". After approx. 30 times im ending up in the MI-Recovery 3.0 where i can choose REBOOT, WIPE DATA, CONNECT WITH MI ASSISTANT (PC-SUITE)
REBOOT: will do again 30 times the message: "Find Device closed unexpectedly"
WIPE DATA: starts from the choose of language and region again and it doesn´t matter which language i choose ends up in the MI-Recovery 3.0
CONNECT WITH MI ASSISTANT: ends up with the english version, that i can´t connect, but with the Chinese version, i can at least open the downloaded ROM 9.5.4.0 and start the flashing process which hang up immediately and doesn´t go beyond 0%. It ends up with some chinese messages i can´t read
FASTBOOT could be reached by pressing Vol- + On/Off, but doesn´t help with a locked bootloader i guess
So if anybody have an idea how to overcome the situation it would be quite helpful.
Thx
Click to expand...
Click to collapse
This seems to be a major bug I had it but resolved it by following this Test Point Method: http://en.miui.com/thread-1351514-1-1.html :good:
I used uBreakiFix to remove the back without chipping the did the process myself
@andril: Thx for the answer. Honestly from all what I read up to now, I expect such an answer, but I still have some questions:
Is this a bug, which is related to the latest upgrade only, or could this be happen also with older SW release?
Does the EDL testpoint method really work with the newest release I have?
Does it make sense to wait maybe for a new release to try the PC-Suite method again?
I don‘t fear to open the device, but want to avoid this of course if there is any possibility.
Thx&cheers
Gosh I was considering resetting my phone before selling on now I'm worried may have the same issue!
I don't think I'll be buying Xiaomi anytime soon.
@neo920768 it sounds bad but it works - @riz157 Not sure if it is a hardware bug after reset - I am glad i didn't do it after updating to the latest Global ROM
Just to give a feedback, that opening the device and flashing in EDL mode works good. Opening the device worked fine and you need to be careful about the fingerprint sensor, but after finishing you don‘t see anything on the device and everything works fine. Flashing with latest fastboot rom has also the small improvement, that you can choose between a lot of Regions, not only China.
Cheers and good luck to everybody
Thx
Hi'
My mother have a nexus 5X,
This morning Phone loopboot ... (phone start : google logo after boot animation and it stays that way )
Since this morning I read everything, and I do not know how to do it anymore
Download mode,ADB, Lg flash tool ,phone in the freezer, disassembled the phone ....
My priority is to try to save data as picture (Yes I know ... it's not easy )
What should I start in this situation ?What is the order of the method to use?
Thank you for your help,
About this phone:
this phone is not rooted
this phone use the latest version of android available (I think android 8.1 )(but the last update is several day/weeks / months ago : this bootloop does not arrive just after an update )
this problem occurs 2 days after the end of warranty #Unlucky
(ps: sorry for my English , It's not my main language )
As far as I know, you need OEM unlock to be on (under developer settings) to flash a new boot/recovery image, if you didn't do that then you need to get the device to load into Android at least 1 time, at least for 2-3 minutes so you can quickly turn this option on (unlocked).
From my experience, it's possible even if you stuck in a boot loop for 1-2 hours, to eventually load into Android without heating/cooling the device - give it a shot.
After you unlock the OEM, follow the instructions and flash a boot and recovery image that fits your currently installed version.
K285490 said:
As far as I know, you need OEM unlock to be on (under developer settings) to flash a new boot/recovery image
Click to expand...
Click to collapse
@BobJellyBeans - Do not attempt to OEM unlock your phone if you are trying to save data. This forces the phone to wipe as a "safety measure".
HELP PLEASE.Is there a way to flash or root AT&T Note 5,stuck in boot loop mode???
Hi to all
I'm member on XDA for a long time,but I really am a newbie considering rooting,flashing and messing with the phones.
Yesterday ,my At&t Samsung galaxy NOTE 5 restarted by itself and started doing that constantly.Maybe because the memory was almost full so the firmware didn't have enough space to run correctly ,I don't really know.
So I decided to do a FACTORY RESET in order to refresh the phone.I backed all up (it did restart few time while I did that but I managed to finish it).
After I did the factory reset and wiped the cache,I rebooted the phone and that is when the boot loop started.
Once or three times came back and started the phone up to the first settings (I managed to put in my google username e.t.c. but after a minute maybe it freezes and restarted by itself again)
I tried again another factory reset but the boot loop continues.I tried many time to turn it off,it restarted up to INSTALLING UPDATE......then tried to turn it off completely (Volume down+Power+Home button) and somehow I managed to turn it off.
I thought that I can come here and find the instructions on how to FLASH it with ODIN,but I couldn't find the stock firmware for AT&t Note 5.
Then I remembered (and read on internet) that the bootloader on AT&T phones is locked !!!!!
I searched some threads here for at least how to root it ,but I can't find anything clearly.
So I'm asking you for help: IS THERE ANY SAFE WAY THAT I CAN DO FLASH OR ROOT MY AT&T SAMSUNG NOTE 5 (EXPLAINED STEP BY STEP) IN ORDER TO MAKE MY PHONE WORK AGAIN????
I have never before messed with the phone.It has the original stock firmware Android 7.0 Nougat.
And the phone is bought in USA,but I live in EUROPE and have unlocked it ,by buying some code online, few years ago.It was working fine until yesterday.
Thank you in advance guys I hope that someone might help me.
Juno 106
Guys I found here some older version (few months older) of Android 7 for my Note 5 and I managed to do a flash. The flashing went OK I went through settings and after few minutes the phone freezes again and restarts. And then again the same,it works fine for a few minutes,freezes and restarts (I can here the camera working inside sometimes too)...........CAN ANYONE HELP ME REPAIR MY PHONE ,PLEASE ???
Hi again
I don't know why no one is replying to me???
Today I managed to make the settings and power up the phone,restored the back up....the phone is working,BUT the PROBLEM is that it constantly freezes and reboots by itself.Sometimes it works for few minutes and reboots,sometimes it works for 30min and then it reboots,sometimes longer...
What might be the problem? Is it some hardware problem processor ,memory or maybe bad battery? It is older model and I have noticed with Accu Battery that most likely the battery haslowered it's capacity.It drains faster,sometimes when it comes to 15% it drains very fast...
Can anyone help me diagnose the problem?
Thank you in advance
Try booting into Download Mode & flash a new stock firmware if all else fails, assuming u tried a factory reset first with no satisfaction. Guides are everywhere. I HTH
PiMPSoFT said:
Try booting into Download Mode & flash a new stock firmware if all else fails, assuming u tried a factory reset first with no satisfaction. Guides are everywhere. I HTH
Click to expand...
Click to collapse
Thank you for your reply
I managed to flash the firmware few times,but the phone keeps freezing after some time and restarts.Sometimes it is stuck in the bootloop,sometimes it starts up to some point,freezes and restarts.
Could it be BAD BATTERY or is it something else?
If it is the battery problem,I will replace it,but I'm afraid that it might be someting else wrong.
What is your opinion?
So after the last update V12.5.2.0.RJZMIXM my phone started restarting randomly. Can i use recovery to flash the previous version, Stable Recovery | V12.0.4.0.RJZMIXM , or do i have to wait for the unlocking of the bootloader ?
You can't revert to older ROM version without unlocking the bootloader.
I have this phone too and after the update had these symptoms (rebooting during calls, freezing occasionally).
What I did I just ignorred them for some time and they've disappeared somehow.
Just let it settle down.
Another good practice after OTA update is to make a factory reset of the phone.
Hope you'll get it working again.