Related
Hi,
anybody here have a Ford Focus working fine using the SYNC application to works with the FORD original SYNC.
I insert a new ROm from here ( update_4_4_4_1024X600_RK3188_11_MAL_25_12_2015) but the SYNC still all in chinese and i dont know how to change it to portuguese or english
I also dont hear nothing. Perhaps the application is directed to another sound output ...
Any help is apreciated.
Kind Regards
Franc
I am having the same issue!
I have a Ford Focus and a KLD RK3066 unit. I've updated my HU many times, using more than 5 different firmwares and every time the SYNC app is MUTED. There must be something wrong with the sound output, as mentioned!!
NOTE FOR NON FORD OWNERS: SYNC is a hardware (that is controlled by the HU in an app with the same name) that comes with the car that controls native bluetooth calling and music playing. It can be used together with the HU, using the car's much better microphone and USB connector. Losing this function is really bad for a Ford owner.
Please some help!
Thanks
kiko4949 said:
Hi,
anybody here have a Ford Focus working fine using the SYNC application to works with the FORD original SYNC.
I insert a new ROm from here ( update_4_4_4_1024X600_RK3188_11_MAL_25_12_2015) but the SYNC still all in chinese and i dont know how to change it to portuguese or english
I also dont hear nothing. Perhaps the application is directed to another sound output ...
Any help is apreciated.
Kind Regards
Franc
Click to expand...
Click to collapse
Mashio said:
I am having the same issue!
I have a Ford Focus and a KLD RK3066 unit. I've updated my HU many times, using more than 5 different firmwares and every time the SYNC app is MUTED. There must be something wrong with the sound output, as mentioned!!
NOTE FOR NON FORD OWNERS: SYNC is a hardware (that is controlled by the HU in an app with the same name) that comes with the car that controls native bluetooth calling and music playing. It can be used together with the HU, using the car's much better microphone and USB connector. Losing this function is really bad for a Ford owner.
Please some help!
Thanks
Click to expand...
Click to collapse
You can ask the seller if the HU can support the SYNC.
alvinjones377 said:
You can ask the seller if the HU can support the SYNC.
Click to expand...
Click to collapse
It does actually! There's even an app that comes in the Android called SYNC, which displays all SYNC information (and it works, but sadly somehow is muted and i can't figure out how to fix it's sound)
Mashio said:
It does actually! There's even an app that comes in the Android called SYNC, which displays all SYNC information (and it works, but sadly somehow is muted and i can't figure out how to fix it's sound)
Click to expand...
Click to collapse
hi, Im also a ford focus owner and i have rk3188 HU (KGL5) you should check in the factory settings the CANbus option. My sync apk works great (spanish) and sounds a little bit lower than the HU sound, so try to max the vol (maybe it is, sometimes if im at level 9 sound i cant hear it, i usually place at 20 vol level). I´ve used some malaksys ROM and i had no problem, and today i upgraded the MCU and still works. Now im having some FC but i think with a factory reset it will solve. The app also works with steering wheel controls, (if a press the SYNC key in it calls the app)
Hi, i have a Erisin ES2301F (1024x600 Rk3188 KGL) with a Ford Kuga MK1 (2009). CanBus module HW 1.0 FW 2.0. In Factory Menu (126) i put Focus-Modeo-Explorer (Simple) but SYNC doesn't work. How can i made it doing something...
In the past i had a Sony CD6000 BT, and i removed only the head unit ( i leave the BT module connected and it seem still powered) but the SYNC app doesn't do anything. I connect the cell with BT of the headunit, or i have to do a new search? I don't see any BT source than the one of the Erisin.
Add:
The question is: maybe with another ROM, i could view which door is opened, what temperature i have set in the climatronic and so on? I'm sure those signals are on canbus of my car (Kuga Titanium) 'cause i read on the cluster of the display of the car, and i see some chinese radio that showing those info. One for all is the Joying.
If those info will pass on the radio, also SYNC should works, 'cause in the electric diagram original mic and original BT are on canbus, all connected directly to GEM.
So, OR the decode module don't works..... or the MCU is so different that doesn't capture those signal.
Someone have the answer?
I have a Ford Escape but I have not figured out how to wire in my canbus to this radio (I have a joying). Can someone point me to the right direction?
dcplaya said:
I have a Ford Escape but I have not figured out how to wire in my canbus to this radio (I have a joying). Can someone point me to the right direction?
Click to expand...
Click to collapse
Hi,
first, try to set Ford Focus Raise in factory canbus setting.
second, check if you have connected AUX L and AUX R cinches to corresponding ones (auxL to Aux L and aux R to aux R) in your harness.
I have so in my Focus and SYNC is ok, but the layout and maintenance of the app is horrible.
czarekskib said:
Hi,
first, try to set Ford Focus Raise in factory canbus setting.
second, check if you have connected AUX L and AUX R cinches to corresponding ones (auxL to Aux L and aux R to aux R) in your harness.
I have so in my Focus and SYNC is ok, but the layout and maintenance of the app is horrible.
Click to expand...
Click to collapse
What are the AUXL and AUX R cinches?? In the quadlock Ford , i have CAN L e CAN H connected to Quadlock of the radio, then they go to decoder box and returned on the radio into the special connector.
in my case - as in uploaded photo, nr 2, white and red chinches
In my case is total differenti. I have only the quadlock . all signals coming from there. No RCA chinches. Maybe you have a focus 3 (2012+). My canbus decoder has only one connector
I think my Escape (2011) with SYNC isn't supported at all. I cant find any wiring harness that works with Joying. I know where my Canbus wires are and could splice them in but I can't even find a generic canbus joying harness.
Did anyone success making Sync work on a Focus 2015 restyling?
New MCU
jperezch said:
Did anyone success making Sync work on a Focus 2015 restyling?
Click to expand...
Click to collapse
Hi,
I have installed a new 8.1 Android head unit, at first it didn't work but the supplier sent me a new MCU that works with Focus 2015. Anyone wants the MCU? Maybe your SYNC works too
foicanetadavo said:
Hi,
I have installed a new 8.1 Android head unit, at first it didn't work but the supplier sent me a new MCU that works with Focus 2015. Anyone wants the MCU? Maybe your SYNC works too
Click to expand...
Click to collapse
I've bought an 8.1 tesla style radio for my 2015 focus with sync2 but steering wheel controls don't work! anyone can help me?
Where does the special port jack connect to ...
czarekskib said:
in my case - as in uploaded photo, nr 2, white and red chinches
Click to expand...
Click to collapse
I dont have the that black sync port ..rest wires connected ... HU goes completely mute when i press sync button... any suggestions ..also.. noob to HU discussion here
I have ecosport 2016 titanium.... head unit....10 inch , 7.1 , 2gb 32gb variant local reseller hypersonic ...
Ravi Venugopal said:
I dont have the that black sync port ..rest wires connected ... HU goes completely mute when i press sync button... any suggestions ..also.. noob to HU discussion here
I have ecosport 2016 titanium.... head unit....10 inch , 7.1 , 2gb 32gb variant local reseller hypersonic ...
Click to expand...
Click to collapse
okay found that port...the local technician had just not used it...sync working perfectly now....allthough that UI needs some improvement
Ravi Venugopal said:
okay found that port...the local technician had just not used it...sync working perfectly now....allthough that UI needs some improvement
Click to expand...
Click to collapse
pics from aliexpress, these r just for total amount of cables required....connect at both ends of canbus. i am using focus config as ecosport Is not shown on the settings.
excessdivide said:
Hello everyone,
Big thanks to the heavy hitters here that are making these units actually usable!
I received my Dasaita HA5217-V600 two weeks ago and thanks to having previously scoured these forums, I was able to install it, in my 2016 Toyota Corolla, with relative ease. Everything worked better than expected, and I had great bluetooth sound, strong WiFi connections, my door and A/C controls appeared on screen, my SWC all matched and decent FM reception. My bluetooth OBDII adapter is arriving this week so I'll have to report back on that.
Click to expand...
Click to collapse
My OBDII adapter arrived today and it immediately paired with my HU, and Torque Pro recognized it instantly! I'm thrilled at how easy this was.
For those interested, this is the adapter I purchased:
https://www.amazon.com/gp/product/B06Y6HLRKY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
So to recap:
My unit is:
MTCD HA5217-V600
10.2 " PX5 1.6 gHz, Octa-core, 2Gb/32Gb
Malaysk v5 ROM and MCU: MTCE v2.65f
Installed in 2016 Toyota Corolla S (6 speaker audio w/o factory "Entune" navigation system) and Rockford-Fosgate Prime's in both front and back.
SWC = all preprogrammed settings match my OEM settings, although they are unconfigurable.
Bluetooth connections have not yet dropped, volume and clarity are on pair with my previous Pioneer HU
Panel buttons all work and LEDs are configurable
Door and A/C controls all appear on screen.
GPS is fast and seemingly accurate so far. Recognized by every app that has looked for it.
OEM vehicle status listed properly in the 'vehicle' section
Amp/Fader/ViperFX all work as expected
WiFi connections are strong enough for my purpose. I can connect to my home WiFi from inside my garage.
AM/FM Reception and clarity are better than the stock system
Screen is bright and usable and auto-dims with Headlights on
Daylight brightness is a little difficult to see. (Then again I live in Florida and the tropical Sun made even my JVC, and Pioneer HU's difficult to see. Kenwood was the best for this IMHO)
OBDii interfaced paired quickly and easily and has so far stayed connected and recognized by apps
OEM Rear-view camera connects to the system without issue and is much easier to see on a 10" screen. As well as now having several configurable options in the "factory settings"
OEM USB port is recognized as well as the 2 additional USB ports included with the HU.
HOWEVER, the OEM AUX audio port is not usable with this configuration. (or if it is, I haven't figured out how to configure/access it yet)
I do not have a DAB+ or Front Camera, TV tuner/DVR so I do not have any information to share about those.
I tested the A/V in with a portable DVD player and there were no unusual issues there.
Over all I am very happy with this unit and am thrilled that I took the risk investing in it.
One more BIG thanks to everyone here who has helped to make these HU's worth it!
Thanks for the detailed write up. I just ordered mine. Px5 7 inch 2gb ram dasaita. Any tips for a newbie? I've been browsing the forums myself for the past couple of weeks and I'm aware of all the mods and custom ROMs etc. Just asking you if there's maybe any advice you wanna give on how I should proceed with the unit or just generally anything that might help.
Appreciate any reply
I have Dasaita/Hotaudio HA2100-v600 7" device and happy - it works here good!
@ Nasty_z: Stock rom & MCU and ModRom
excessdivide said:
My OBDII adapter arrived today and it immediately paired with my HU, and Torque Pro recognized it instantly! I'm thrilled at how easy this was.
For those interested, this is the adapter I purchased:
https://www.amazon.com/gp/product/B06Y6HLRKY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
So to recap:
My unit is:
MTCD HA5217-V600
10.2 " PX5 1.6 gHz, Octa-core, 2Gb/32Gb
Malaysk v5 ROM and MCU: MTCE v2.65f
Installed in 2016 Toyota Corolla S (6 speaker audio w/o factory "Entune" navigation system) and Rockford-Fosgate Prime's in both front and back.
SWC = all preprogrammed settings match my OEM settings, although they are unconfigurable.
Bluetooth connections have not yet dropped, volume and clarity are on pair with my previous Pioneer HU
Panel buttons all work and LEDs are configurable
Door and A/C controls all appear on screen.
GPS is fast and seemingly accurate so far. Recognized by every app that has looked for it.
OEM vehicle status listed properly in the 'vehicle' section
Amp/Fader/ViperFX all work as expected
WiFi connections are strong enough for my purpose. I can connect to my home WiFi from inside my garage.
AM/FM Reception and clarity are better than the stock system
Screen is bright and usable and auto-dims with Headlights on
Daylight brightness is a little difficult to see. (Then again I live in Florida and the tropical Sun made even my JVC, and Pioneer HU's difficult to see. Kenwood was the best for this IMHO)
OBDii interfaced paired quickly and easily and has so far stayed connected and recognized by apps
OEM Rear-view camera connects to the system without issue and is much easier to see on a 10" screen. As well as now having several configurable options in the "factory settings"
OEM USB port is recognized as well as the 2 additional USB ports included with the HU.
HOWEVER, the OEM AUX audio port is not usable with this configuration. (or if it is, I haven't figured out how to configure/access it yet)
I do not have a DAB+ or Front Camera, TV tuner/DVR so I do not have any information to share about those.
I tested the A/V in with a portable DVD player and there were no unusual issues there.
Over all I am very happy with this unit and am thrilled that I took the risk investing in it.
One more BIG thanks to everyone here who has helped to make these HU's worth it!
Click to expand...
Click to collapse
Hi, I'm a fellow Corolla owner in FL As well!
I just bought a Dasaita PX3 2GB RAM 16GB (Quad core vs your 8 core PX5 due to it being close to $300 flat on an ebay flash sale) and have a question regarding the AUX port, you said the stock USB was retained but not the AUX, is there an aux port on your unit or any way to hook one up?
-Where did you mount the GPS antenna?
-Are you using the stock interface, or have you tried any launchers? I downloaded auto mate and Car Launcher free and so far like Car Launcher's look.
-Anything unusual with your unit?
-Have you tested Waze and Google maps? Do they run stable?
-Does your unit pickup your wifi automatically when you startup the car?
I appreciate your very detailed post as I'm patiently waiting for mines to arrive within the next week.
gab2012 said:
Hi, I'm a fellow Corolla owner in FL As well!
I appreciate your very detailed post as I'm patiently waiting for mines to arrive within the next week.
Click to expand...
Click to collapse
I have a question regarding the AUX port, you said the stock USB was retained but not the AUX, is there an aux port on your unit or any way to hook one up?
*Sad to say that I have not yet found a way to use the AUX port, but then again I haven't tried very hard.
-Where did you mount the GPS antenna?
*I mounted mine on the passenger side dashboard, as far right and forward as it would go. It blends right in as far as I am concerned.
-Are you using the stock interface, or have you tried any launchers? I downloaded auto mate and Car Launcher free and so far like Car Launcher's look.
*I Bought Car Launcher Pro. By far the best overall. It has been steadily updated, has a great look/feel, easy to modify and the most stable.
-Anything unusual with your unit?
*Nothing that I can think of. I'm still in love with it!
-Have you tested Waze and Google maps? Do they run stable?
*I don't use Google Maps, but I have Waze autostart. I'm dependent upon it now! Lots of threads here about Google Maps not working well.
-Does your unit pickup your wifi automatically when you startup the car?
*as of HA-2.75 it does.
You |may| have to trim a piece or 2 off the bezel to get it to fit perfectly in your dash. I had to cut off 2 tabs on top of my PX5.
Good luck!
I have a similar 9" unit.
Running Malaysk v5 ROM and MTCE v2.71 as the bluetooth for 2.75 didn't work well.
I do have the DAB+ aerial and app and it works ok however mostly I use Google music. I have no problems using Waze or copilot.
What I haven't been able to do is get my reversing camera to show on the screen. I have a wireless version and both halfs have leds that light up when the car is in reverse but no picture regardless of which connection I use.
Also I can't get it to connect to a ELM357 OBD2 dongle.
I've had the unit for 4 months and last week while driving to work the screen went black, the unit was still working it was just the screen. The next time I started the car the screen came back....weird.
Other then this the units ace!
excessdivide said:
I have a question regarding the AUX port, you said the stock USB was retained but not the AUX, is there an aux port on your unit or any way to hook one up?
*Sad to say that I have not yet found a way to use the AUX port, but then again I haven't tried very hard.
-Where did you mount the GPS antenna?
*I mounted mine on the passenger side dashboard, as far right and forward as it would go. It blends right in as far as I am concerned.
-Are you using the stock interface, or have you tried any launchers? I downloaded auto mate and Car Launcher free and so far like Car Launcher's look.
*I Bought Car Launcher Pro. By far the best overall. It has been steadily updated, has a great look/feel, easy to modify and the most stable.
-Anything unusual with your unit?
*Nothing that I can think of. I'm still in love with it!
-Have you tested Waze and Google maps? Do they run stable?
*I don't use Google Maps, but I have Waze autostart. I'm dependent upon it now! Lots of threads here about Google Maps not working well.
-Does your unit pickup your wifi automatically when you startup the car?
*as of HA-2.75 it does.
You |may| have to trim a piece or 2 off the bezel to get it to fit perfectly in your dash. I had to cut off 2 tabs on top of my PX5.
Good luck!
Click to expand...
Click to collapse
Just to give you a quick update, I received my PX3 unit about a week ago and installed it. At first I encountered one main bug which was that the radio app would go to the background automatically every time I opened it, dasaita sent me the link to the MCU thread and everything updated fixing the issue.
As far as launchers go, I stuck with Car Web Guru for now as it gave the most options on a free basis to experiment with different themes.
The only thing I've noticed is that the backup camera image is a little laggy but nothing to die for.
The only thing I'm still trying to figure out is how to get my wifi hotspot to start automatically (Note 8) when connected to CAR KIT, I tried tasker but it says unable for my device.
I love this HU! and Dasaita on ebay has been very responsive.
gab2012 said:
Just to give you a quick update, I received my PX3 unit about a week ago and installed it. At first I encountered one main bug which was that the radio app would go to the background automatically every time I opened it, dasaita sent me the link to the MCU thread and everything updated fixing the issue.
As far as launchers go, I stuck with Car Web Guru for now as it gave the most options on a free basis to experiment with different themes.
The only thing I've noticed is that the backup camera image is a little laggy but nothing to die for.
The only thing I'm still trying to figure out is how to get my wifi hotspot to start automatically (Note 8) when connected to CAR KIT, I tried tasker but it says unable for my device.
I love this HU! and Dasaita on ebay has been very responsive.
Click to expand...
Click to collapse
Hello I have bought a Dasaita HA2039-S720 for Mitsubishi Outlander 2014. I have the same Issue with my Radio App. Everytime I open it, it goes in background. Kill it with the Task Manager can't stop the Music. I have to reboot the Device. I have MCU Version MTCE_HA_V2.75.1 and ROM px3-userdebug 7.1.2NHG47L eng.hct.20171206.143935 test-keys.
Did a system update realy fix your Problem? I noticed that this happend every time a station is scanned and saved. Delete the Cache and Programm Data from Radio App in the App section fixed the issue but you have no music then but white noise.
I have some Issues with apps in general. Sometimes Apps are crashing and did not load properly and stuck while loading.
My OEM Rear CAM Image is laggy and not very smooth too.
Today I tried to update die Rom with this Version HCT2_px3_7.1(20180206) but it failed. Don't know if it's the right one. The Device found this Image and promptet me to update. After a short loading screen a Faild message appeared on the screen and it showed an options screen. I inserted another SD CARD with the image of the update and choosed "update from SD or USB" but it failed again so I rebooted the system. I choose swipe in the beginning and after a reboot the system was in factory condition.
But can anybody explain me what went wrong and how to properly make a Rom and MCU update.
Thanx
Hey guys I just wanted to become a part of this I just purchased and installed this type radio along with the Bluetooth adapter for the cars computer. Hopefully I will soon get the ATSC digital antenna so I can watch TV when my wife goes in to shop for something that will supposedly: "only take a minute." I have to say the install was incredibly easy. Everything works very well and sounded great connected to my factory system of the 2013 Kia Optima. I did use the radio's subwoofer output and added a 300 watt powered Rockford Fosgate subwoofer. It all sounds amazing together. I attached two photos of the type of radio I purchased (or tried to. Kinda new here).
View attachment 4483442
View attachment 4483443
I am looking at one of these model for my Ford Focus, but can anyone tell me if it come with a separate canbus?? The only reason I am asking is that I have the V840-8 which doesn’t.... unfortunately it only has a prgramable key control, which doesn’t always work...
Many thanks for anyone that can help
Bradsr12 said:
I am looking at one of these model for my Ford Focus, but can anyone tell me if it come with a separate canbus?? The only reason I am asking is that I have the V840-8 which doesn’t.... unfortunately it only has a prgramable key control, which doesn’t always work...
Many thanks for anyone that can help
Click to expand...
Click to collapse
Hello
i don't know which model Focus you have. I have a Focus MK3 from 2012 and i just ordered this unithttps://nl.aliexpress.com/item/Dasaita-Android-8-0-4g-32g-Car-Radio-for-Ford-Focus-2012-2013-2014-2015-Multimedia/32889176494.html?spm=a2g0s.9042311.0.0.1e934c4diSRsuQ
and it comes with a canbus adapter and works great. i received it today and installed it. Everything works out of the box.
Thank you so much for your reply, mine is the Ford Focus mk2 2010 so slightly different, however despite the stereo surround the unit is the same, it the harness is a different connection... mine is a square connection
Really appreciate your help
---------- Post added at 10:02 PM ---------- Previous post was at 10:00 PM ----------
May I ask if yours is the V600??
Bradsr12 said:
Thank you so much for your reply, mine is the Ford Focus mk2 2010 so slightly different, however despite the stereo surround the unit is the same, it the harness is a different connection... mine is a square connection
Really appreciate your help
---------- Post added at 10:02 PM ---------- Previous post was at 10:00 PM ----------
May I ask if yours is the V600??
Click to expand...
Click to collapse
http://www.hot-audio.com/category/Ford-3.html
I tink they have a car specific unit for you too. Just check out their site. The benefits of these units is that it will fit perfect in your car and all cables and adapters are included...
Btw I have a v840-8 unit
Sent from my SM-G950F using Tapatalk
I would like to know the boot time for this Android 8 version? I am looking at getting one for my Chevy Cruze but the boot time is a big thing for me.
scotch&dry said:
I would like to know the boot time for this Android 8 version? I am looking at getting one for my Chevy Cruze but the boot time is a big thing for me.
Click to expand...
Click to collapse
My Dasaita PX5 4/32 unit (MCU version 2.88) turns completely off in 30 seconds (lowest preset in system settings) after turning the ignition off.
When turning the ignition on the unit is starting up behind the scenes. When you press power it's already half way in the booting process or even done depending on how quick you switch the unit on.
I'd say about 15 seconds to boot up. This is with a DAB+ unit and USB stick attached.
If you want instant on (e.g. when shopping for an hour or doing multiple deliveries), you can play with the different off time presets in the system settings.
TBM2 said:
My Dasaita PX5 4/32 unit (MCU version 2.88) turns completely off in 30 seconds (lowest preset in system settings) after turning the ignition off.
When turning the ignition on the unit is starting up behind the scenes. When you press power it's already half way in the booting process or even done depending on how quick you switch the unit on.
I'd say about 15 seconds to boot up. This is with a DAB+ unit and USB stick attached.
If you want instant on (e.g. when shopping for an hour or doing multiple deliveries), you can play with the different off time presets in the system settings.
Click to expand...
Click to collapse
Awesome. Thanks for this info @TBM2
How good is the microphone performance? I have an old android headunit that I could never get mics to work properly on. Voice calls and "Okay Google" is important for me when I upgrade.
Grims said:
How good is the microphone performance? I have an old android headunit that I could never get mics to work properly on. Voice calls and "Okay Google" is important for me when I upgrade.
Click to expand...
Click to collapse
It's an MTCD - they're pretty much all the same.
For best peformance on this platform, use an external mic, which may require the internal disconnected.
marchnz said:
It's an MTCD - they're pretty much all the same.
For best peformance on this platform, use an external mic, which may require the internal disconnected.
Click to expand...
Click to collapse
Sorry, I'm just curious as I just got one for my car installed... but the internal microphone performance is horrible. The box came w/ an external microphone, but is there something i need to do to disable the internal microphone?
scotch&dry said:
I would like to know the boot time for this Android 8 version? I am looking at getting one for my Chevy Cruze but the boot time is a big thing for me.
Click to expand...
Click to collapse
Like any MTCD unit, first boot is approx 15-20 secs, with the unit sleeping thereafter resulting in 'instant' resume.
Read
Hi
My auto radio version is:
px3-userdebug 7.1.2 NHG47L eng.hct20180
MTCE_XRC_V2.80_1
2Gb/ 16Gb
https://es.aliexpress.com/item/Isud...452.html?spm=a2g0s.9042311.0.0.215563c05GDxho
My Car: Alfa Romeo 159
Since a month ago, I´m trying to resolve my problem. Only 50% buttons swc are working:
My android radio has canbus box. I have accessed and configured canbus in "factory settings tap" but my problem continue ( by default canbus wasn´t configured ).
The app to remap the buttons does not detect any button on the steering wheel, it only shows "Reset" and "Save" but I can not do anything with it.
I have reading a lot of post... Is possible that I need to connect wire Key1 and wire Key2? How should I connect "key1" and "key2"? Could it be the solution?
Any kind of help is welcome. Thank you very much
moreno_cos said:
Hi
My auto radio version is:
px3-userdebug 7.1.2 NHG47L eng.hct20180
MTCE_XRC_V2.80_1
2Gb/ 16Gb
https://es.aliexpress.com/item/Isud...452.html?spm=a2g0s.9042311.0.0.215563c05GDxho
My Car: Alfa Romeo 159
Since a month ago, I´m trying to resolve my problem. Only 50% buttons swc are working:
My android radio has canbus box. I have accessed and configured canbus in "factory settings tap" but my problem continue ( by default canbus wasn´t configured ).
The app to remap the buttons does not detect any button on the steering wheel, it only shows "Reset" and "Save" but I can not do anything with it.
I have reading a lot of post... Is possible that I need to connect wire Key1 and wire Key2? How should I connect "key1" and "key2"? Could it be the solution?
Any kind of help is welcome. Thank you very much
Click to expand...
Click to collapse
Check that allí connectors from/to canbus and to the headunit are well connected (sometimes they require some force press to really be plugged)
On the link you provided there is a guy that commented that everything worked as expected including the SWC so....if you can't fix it contact your seller for support
Enviado desde mi SM-G950F mediante Tapatalk
moreno_cos said:
Hi
My auto radio version is:
px3-userdebug 7.1.2 NHG47L eng.hct20180
MTCE_XRC_V2.80_1
2Gb/ 16Gb
https://es.aliexpress.com/item/Isud...452.html?spm=a2g0s.9042311.0.0.215563c05GDxho
My Car: Alfa Romeo 159
Since a month ago, I´m trying to resolve my problem. Only 50% buttons swc are working:
My android radio has canbus box. I have accessed and configured canbus in "factory settings tap" but my problem continue ( by default canbus wasn´t configured ).
The app to remap the buttons does not detect any button on the steering wheel, it only shows "Reset" and "Save" but I can not do anything with it.
I have reading a lot of post... Is possible that I need to connect wire Key1 and wire Key2? How should I connect "key1" and "key2"? Could it be the solution?
Any kind of help is welcome. Thank you very much
Click to expand...
Click to collapse
On 1st photo the 3 "red" buttons are only working with the "original" factory installed "blue&Me" equipment, no other hardware can use or decode them.
On 2nd photo the 2 "red" button are only working with the original factory installed "blue&Me" equipment ad use to switch information on Factory Magneti Marelli multimedia/navigation unit during calls, with standard "simply" Alfa Romeo car stereo they are only working on charging disc from official CD Charger; no other hardware can use or decode them.
On some cases "non standard hard coded manufacturer swc" have funny responses; in my case Voice command button open the app carousel in my HU and the Open/close a phone call button activate the Mute function.
Check you Alfa Romeo Use and Maintenance Guide and Blue&Me User manual thaere was all the info provided by me.
So the other SWC are working like expected!
iRcKenny said:
On 1st photo the 3 "red" buttons are only working with the "original" factory installed "blue&Me" equipment, no other hardware can use or decode them.
On 2nd photo the 2 "red" button are only working with the original factory installed "blue&Me" equipment ad use to switch information on Factory Magneti Marelli multimedia/navigation unit during calls, with standard "simply" Alfa Romeo car stereo they are only working on charging disc from official CD Charger; no other hardware can use or decode them.
On some cases "non standard hard coded manufacturer swc" have funny responses; in my case Voice command button open the app carousel in my HU and the Open/close a phone call button activate the Mute function.
Check you Alfa Romeo Use and Maintenance Guide and Blue&Me User manual thaere was all the info provided by me.
So the other SWC are working like expected!
Click to expand...
Click to collapse
On 1st photo: I agree with you. My alfa romeo is a car of 2007 and it hasn´t blue&me installed. I did not know if I could use these buttons with the new radio
On 2nd photo: The buttons were working with my original radio. I could change the memorized radio programs. I've seen in some YouTube video, how this function is still operational with the android radio car and I would like use its.
Thank you very much for your help
moreno_cos said:
On 1st photo: I agree with you. My alfa romeo is a car of 2007 and it hasn´t blue&me installed. I did not know if I could use these buttons with the new radio
On 2nd photo: The buttons were working with my original radio. I could change the memorized radio programs. I've seen in some YouTube video, how this function is still operational with the android radio car and I would like use its.
Thank you very much for your help
Click to expand...
Click to collapse
Try long pressing the ones for "skip tracks/seek radio stations". My units acts like this. Try also all "Alfa Romes" canbus entries on Factory Settings
iRcKenny said:
On 1st photo the 3 "red" buttons are only working with the "original" factory installed "blue&Me" equipment, no other hardware can use or decode them.
On 2nd photo the 2 "red" button are only working with the original factory installed "blue&Me" equipment ad use to switch information on Factory Magneti Marelli multimedia/navigation unit during calls, with standard "simply" Alfa Romeo car stereo they are only working on charging disc from official CD Charger; no other hardware can use or decode them.
On some cases "non standard hard coded manufacturer swc" have funny responses; in my case Voice command button open the app carousel in my HU and the Open/close a phone call button activate the Mute function.
Check you Alfa Romeo Use and Maintenance Guide and Blue&Me User manual thaere was all the info provided by me.
So the other SWC are working like expected!
Click to expand...
Click to collapse
iRcKenny said:
Try long pressing the ones for "skip tracks/seek radio stations". My units acts like this. Try also all "Alfa Romes" canbus entries on Factory Settings
Click to expand...
Click to collapse
Long pressing not working, and I´ve tried to configure canbus tap but it not resolve de issue
Thank you again
Hi!!
My Alfa 159 works like yours, only 4 buttons are working. I had one unit android 5.1 before the 7.1.2 and everything from swc work.
If you have the solution please MP
Ruiroach said:
Hi!!
My Alfa 159 works like yours, only 4 buttons are working. I had one unit android 5.1 before the 7.1.2 and everything from swc work.
If you have the solution please MP
Click to expand...
Click to collapse
The seller send me a rom update, but I don´t sure to update the radio... Will it solve the problem or will it further damage it...
I can send you the rom if yo want it
moreno_cos said:
The seller send me a rom update, but I don´t sure to update the radio... Will it solve the problem or will it further damage it...
I can send you the rom if yo want it
Click to expand...
Click to collapse
I dont think it will make any difference, there is a way that MTCDTools can remap SWC on cars with CAN Bus, @ikerg can tell you how to do it or what thread its in.
typos1 said:
I dont think it will make any difference, there is a way that MTCDTools can remap SWC on cars with CAN Bus, @ikerg can tell you how to do it or what thread its in.
Click to expand...
Click to collapse
any ideas please?
moreno_cos said:
any ideas please?
Click to expand...
Click to collapse
pm @ikerg or search the forums, hes deffo mentioned how to do it on CAN Bus units before.
typos1 said:
pm @ikerg or search the forums, hes deffo mentioned how to do it on CAN Bus units before.
Click to expand...
Click to collapse
Found said posts and they were for car which communicate with resistive signals via canbus (or something ), so wiring the canbus from car harness directly to key1/2 gives access to the buttons.
If Alfa uses no resistive signals, you wont get away with this.
GM cars like mine have the buttons via hardcoded addresses via canbus and you can only try to find those codes in android or mod MCU profile it seems... too nub to do so in my case.. trying hard
Xorit said:
Found said posts and they were for car which communicate with resistive signals via canbus (or something ), so wiring the canbus from car harness directly to key1/2 gives access to the buttons.
If Alfa uses no resistive signals, you wont get away with this.
GM cars like mine have the buttons via hardcoded addresses via canbus and you can only try to find those codes in android or mod MCU profile it seems... too nub to do so in my case.. trying hard
Click to expand...
Click to collapse
Theyre not the posts I was talking about - pretty certain theres a way to programme CAN Bus SWC.
Alfa 159s have CAN Bus SWC.
I've had a similar problem with my Alfa 159 when I installed a PX3 unit. However, for me all the SWC buttons except the centre button on the left set work (i.e. pic 1) and only the left and right SWC buttons on the right set (i.e. pic 2). It is weird as the buttons that do not work mimic the other buttons for some reason so it's like crossing of signals or decoding it wrong.
As I didn't find anyone else having a problem I assumed it was either the CAN bus decoder (I opened it up and flipped switch 4 which helped I think but maybe it isn't suitable?) or the connection behind the steering wheel is loose. I haven't got round to checking the connection (apparently it's simple to open) as I can still control most things.
BTW, my car had the blue&me installed from factory.
SWC on Alfa Romeo 159
H all, I just installed a new Android head unit in my Alfa Romeo 159 SW (2006) and all the SWC's work and I can map them from the app. Below I will explain how I did it, hope this will help.
My head unit:
Xtrons TE706PL
PX 5 octacore 4GB 32BG Android 8
My car:
Alfa Romeo 159 SW
Upgraded from original radio (so not the navigation unit)
My car did not have Blue&Me
Required hardware:
Dedicated CANBUS adapter
Connect2 (company that make it) CTSAR002.2 (product number)
Patch lead to go with canbus adapter
Connect2 (company that make it) CTMULTILEAD.2 (product number)
I ordered both from Amazon Germany from seller NIQ. The patch lead was included with the CANBUS adapter, just make sure to select the correct one meant for Chinese head units. Price was 60 euros.
Installation
The CANBUS adapter is connected between the original car connections and the head unit. This looks confusing at first (it has connections on three sides), but in the end everything only fits one way. On one side connect the patch lead, on the other side it is connected to the head unit and on the last side it is connected to the original car plugs. All these connections are very simple with plugs that only fit one way. (I did need quite some force to push in the 2 of the 3 original plugs into the CANBUS adapter)
As mentioned, the patch lead is connected to the CANBUS adapter on one side. On the other side you need to connect it to the KEY 1, KEY 2 and GROUND wire coming from the head unit. This was the only connection that is not made with plugs, so either crimp them together (which I did, very simple, but you need a crimping tool), solder them, or make another good wire to wire connection.
Important notes:
The connection need to be made in a specific order!
First connect KEY 1, KEY 2 and GRND wires
Second connect the CANBUS adapter to the head unit
Last step is to connect the CANBUS adapter to the car connections
My car did not have Blue&Me, so I don't know if this changes anything. I think I read somewhere you can just leave it in the car and not connect it. But maybe do a little research.
All this is also specified in the manuals provided with the products. Connects2 has some nice youtube videos on the CANBUS adapters, just google them.
I did quite some research myself before I figured it out, but now all is installed and working perfectly! I reprogrammed all the keys to my own preferences, including google assistant speech activation button.
Hope this helps!
SJ1977 said:
H all, I just installed a new Android head unit in my Alfa Romeo 159 SW (2006) and all the SWC's work and I can map them from the app. Below I will explain how I did it, hope this will help.
My head unit:
Xtrons TE706PL
PX 5 octacore 4GB 32BG Android 8
My car:
Alfa Romeo 159 SW
Upgraded from original radio (so not the navigation unit)
My car did not have Blue&Me
Required hardware:
Dedicated CANBUS adapter
Connect2 (company that make it) CTSAR002.2 (product number)
Patch lead to go with canbus adapter
Connect2 (company that make it) CTMULTILEAD.2 (product number)
I ordered both from Amazon Germany from seller NIQ. The patch lead was included with the CANBUS adapter, just make sure to select the correct one meant for Chinese head units. Price was 60 euros.
Installation
The CANBUS adapter is connected between the original car connections and the head unit. This looks confusing at first (it has connections on three sides), but in the end everything only fits one way. On one side connect the patch lead, on the other side it is connected to the head unit and on the last side it is connected to the original car plugs. All these connections are very simple with plugs that only fit one way. (I did need quite some force to push in the 2 of the 3 original plugs into the CANBUS adapter)
As mentioned, the patch lead is connected to the CANBUS adapter on one side. On the other side you need to connect it to the KEY 1, KEY 2 and GROUND wire coming from the head unit. This was the only connection that is not made with plugs, so either crimp them together (which I did, very simple, but you need a crimping tool), solder them, or make another good wire to wire connection.
Important notes:
The connection need to be made in a specific order!
First connect KEY 1, KEY 2 and GRND wires
Second connect the CANBUS adapter to the head unit
Last step is to connect the CANBUS adapter to the car connections
My car did not have Blue&Me, so I don't know if this changes anything. I think I read somewhere you can just leave it in the car and not connect it. But maybe do a little research.
All this is also specified in the manuals provided with the products. Connects2 has some nice youtube videos on the CANBUS adapters, just google them.
I did quite some research myself before I figured it out, but now all is installed and working perfectly! I reprogrammed all the keys to my own preferences, including google assistant speech activation button.
Hope this helps!
Click to expand...
Click to collapse
Thanks for the info, but what unit do you have ? - "TE706PL" is a made up name, your MCU will tell us what unit it is, I m guessing a GS ?
typos1 said:
Thanks for the info, but what unit do you have ? - "TE706PL" is a made up name, your MCU will tell us what unit it is, I m guessing a GS ?
Click to expand...
Click to collapse
Sorry, I was not near my car, so couldn't find my MCU version. But here it is:
MTCE_GS_V2.88_3
Jun 12 2018 11:17:36
I have a PX5 and have the same issue.
I see people talking about their chinesses mtcd/e read all the can protocols (open doors, all the swc, radio info to main pannel...)
Talking to my seller, he told me that may be the can decoder. Offers me a refund but I want one that works 100%.
¿Someone have the full functional decoder?
bantroi said:
I have a PX5 and have the same issue.
I see people talking about their chinesses mtcd/e read all the can protocols (open doors, all the swc, radio info to main pannel...)
Talking to my seller, he told me that may be the can decoder. Offers me a refund but I want one that works 100%.
¿Someone have the full functional decoder?
Click to expand...
Click to collapse
More likely that its just not supported, some cars have even less support.
bantroi said:
I have a PX5 and have the same issue.
I see people talking about their chinesses mtcd/e read all the can protocols (open doors, all the swc, radio info to main pannel...)
Talking to my seller, he told me that may be the can decoder. Offers me a refund but I want one that works 100%.
¿Someone have the full functional decoder?
Click to expand...
Click to collapse
That's what Im trying to find, a canbus decoder with more options.
I had the alfa 159 android 5.1 unit and It shows temperature, doors and full keys function. I upgraded to a new unit android 7.1 and now I haven't temperature, doors and only half of keys are working.
Hi
I have a problem with the can bus
ciytroen c4 assembly of a dedicated chinese.
The problem appears after plugging the radio into the cube after the serial one, namely the canbus module beeps pulsating. I will add that the radio turns on, receiving stations, they can be operated.
I will add that after configuring the module in the radio settings, the steering wheel buttons work this way. means there is communication and it still squeaks. I tried to insert the bundle with the module also squeaks.
watch it
kolaaa3 said:
Hi
I have a problem with the can bus
ciytroen c4 assembly of a dedicated chinese.
The problem appears after plugging the radio into the cube after the serial one, namely the canbus module beeps pulsating. I will add that the radio turns on, receiving stations, they can be operated.
I will add that after configuring the module in the radio settings, the steering wheel buttons work this way. means there is communication and it still squeaks. I tried to insert the bundle with the module also squeaks.
watch it
Click to expand...
Click to collapse
Hi
If you didn't manage to solve the problem yet...
You need to setup the can bus decoder in your head unit and then the beeping will stop.
If you need help just ask!
Cheers
StevoVTS said:
Hi
If you didn't manage to solve the problem yet...
You need to setup the can bus decoder in your head unit and then the beeping will stop.
If you need help just ask!
Cheers
Click to expand...
Click to collapse
Hi
thanks for the hint
one problem solved
there are more of these problems
- does not show the open door
-no possibility to control car functions
- air conditioning control does not work
kolaaa3 said:
Hi
thanks for the hint
one problem solved
there are more of these problems
- does not show the open door
-no possibility to control car functions
- air conditioning control does not work
Click to expand...
Click to collapse
Hi,
I'm dealing with the same problems.
Some of the car functions you can change over the car settings app.
And there should be a car info app which shows fuel consumption.
I'm still using the OEM multiscreen with steering wheel to change car settings.
But when using that I have the issue that all OEM displays get off and on during driving.
I'm trying to find a solution.
StevoVTS said:
But when using that I have the issue that all OEM displays get off and on during driving.
I'm trying to find a solution.
Click to expand...
Click to collapse
I have this problem too
There will also be information and oil change
every now and then kompyer performs a system test itself
what is your can bus decoder model?
kolaaa3 said:
I have this problem too
There will also be information and oil change
every now and then kompyer performs a system test itself
what is your can bus decoder model?
Click to expand...
Click to collapse
Yes the system diagnostics are running too.
I have a Raise can bus decoder G-PSA-RZ-65
I have 3 of them and with all the same problems.
StevoVTS said:
Yes the system diagnostics are running too.
I have a Raise can bus decoder G-PSA-RZ-65
I have 3 of them and with all the same problems.
Click to expand...
Click to collapse
I have a PSA-RZ- 15 decoder
I saw a video on youtube where everything worked
in the comments, the author wrote that he was using the PSA-RZ- 01 decoder
how do you set the can on the radio??
kolaaa3 said:
I have a PSA-RZ- 15 decoder
I saw a video on youtube where everything worked
in the comments, the author wrote that he was using the PSA-RZ- 01 decoder
how do you set the can on the radio??
Click to expand...
Click to collapse
I bought a PSA-RZ-01 decoder. This one doesn't work with my android HU. Maybe I'll try the Hiworld decoder. Really annoying
Are these MTCB type head units?
Did anybody find a fix for this problem.
I have the same problem with the citroen c4 doing a selftest while driving.
And it keeps resetting the small display
sanas24 said:
Did anybody find a fix for this problem.
I have the same problem with the citroen c4 doing a selftest while driving.
And it keeps resetting the small display
Click to expand...
Click to collapse
Is it an MTCB unit or hotboxing
marchnz said:
Is it an MTCB unit or hotboxing
Click to expand...
Click to collapse
It is the Srnubi T10 with MCU: TS10.1.1 android 11
https://nl.aliexpress.com/item/4001276007928.html
sanas24 said:
It is the Srnubi T10 with MCU: TS10.1.1 android 11
https://nl.aliexpress.com/item/4001276007928.html
Click to expand...
Click to collapse
Not MTCB, wrong forum
marchnz said:
Not MTCB, wrong forum
Click to expand...
Click to collapse
True, but I think the problem is related to the canbus module. So wanted to check if someone with similar problems did find a fix
Hi to all. I finally got a newer Andeoid version for my headunit and now all informations I need or I expected are showing on my headunit.
Everything before the update wasn't shown now appears like doors open informations, ECU fault codes, fuel informations and consumption, AC informations everything is shown like a popup information. And all that withe the Rais canbus decoder. The small original display I kept cause of the missing informations on the headunit is now not needed any more.
If someone still have problems with the canbus all you need is to update your andeoid unit to the actual version for your unit.
Can you advise what your canbuse settings are ?
Inside of the factory menu ?
I just installed a android T10 unit with a Raise canbus module. But only thing that is working on my Citroen C4 are the volume buttons...and even that does not work correct. I i press the menu button on my steering wheel sound also go up
StevoVTS said:
Hi to all. I finally got a newer Andeoid version for my headunit and now all informations I need or I expected are showing on my headunit.
Everything before the update wasn't shown now appears like doors open informations, ECU fault codes, fuel informations and consumption, AC informations everything is shown like a popup information. And all that withe the Rais canbus decoder. The small original display I kept cause of the missing informations on the headunit is now not needed any more.
If someone still have problems with the canbus all you need is to update your andeoid unit to the actual version for your unit.
Click to expand...
Click to collapse
Could you tell what exactly Android Unit do you have?
StevoVTS said:
Hi,
I'm dealing with the same problems.
Some of the car functions you can change over the car settings app.
And there should be a car info app which shows fuel consumption.
I'm still using the OEM multiscreen with steering wheel to change car settings.
But when using that I have the issue that all OEM displays get off and on during driving.
I'm trying to find a solution.
Click to expand...
Click to collapse
Hi, i have the same problem. Do you find something, how to fix this problem with resetting displays?
StevoVTS said:
Hi to all. I finally got a newer Andeoid version for my headunit and now all informations I need or I expected are showing on my headunit.
Everything before the update wasn't shown now appears like doors open informations, ECU fault codes, fuel informations and consumption, AC informations everything is shown like a popup information. And all that withe the Rais canbus decoder. The small original display I kept cause of the missing informations on the headunit is now not needed any more.
If someone still have problems with the canbus all you need is to update your andeoid unit to the actual version for your unit.
Click to expand...
Click to collapse
do you mean the newer version of the headunit or can.apk? I have done both and despite selecting different models the problem exists.. (My MCU starts CVD)
czaja1998 said:
Hi, i have the same problem. Do you find something, how to fix this problem with resetting displays?
Click to expand...
Click to collapse
Have you gone to Car Settings under factory and selected the relevant file under Can Setting? R011 is for Citroen C4 where the steering keys work fine, however my instrument panel keeps flicking between kmph and mph..
R016 works fine but only volume buttons work and the display screen thinks CD or radio is on.. (see picture)
scotcruz said:
do you mean the newer version of the headunit or can.apk? I have done both and despite selecting different models the problem exists.. (My MCU starts CVD)
Have you gone to Car Settings under factory and selected the relevant file under Can Setting? R011 is for Citroen C4 where the steering keys work fine, however my instrument panel keeps flicking between kmph and mph..
R016 works fine but only volume buttons work and the display screen thinks CD or radio is on.. (see picture)
Click to expand...
Click to collapse
In my android radio version, I didn’t see anything like “R0..” When I choose version of canbus “raise” -> psa/Citroen -> I have only models of car and I get C4L. Everything works like steering wheel buttons but I have problems with resetting displays and appearing diagnosis.
I recently installed a Xtrons PQS90MTVL head unit in a skoda superb. I have a couple of questions on how to get it to work correctly when navigating.
1) It seems that you can set the navigation sounds to be a percentage of the radio volume but cannot set it to play at a given volume regardless. The problem is that the radio seems to be constantly on and there is no way to turn it off. The 'on/off' button simply mutes the radio - and the navigation sounds.
Often I am in an area where I cannot pick up a decent radio signal on the programme I want and just get static. In these situations I want to turn the radio off but still hear navigation sounds. I don't want to listen to loud static just so I can have the nav sounds play at a percentage of that static. Is there a way to turn the radio off but still get navigation sounds? (a workaround I have found is to play a media file instead of the radio and then pause playback. The nav sounds are then still a percentage of the - non existent - playback volume. However this should not be necessary)
2) It also seems that a Internet connection is needed for any navigation. even google maps won't do a search without it as it says I am offline. (is this true?)
I have bought the 4G wifi dongle but have a question about its use. Does the HU connect to the dongle, as far as data is concerned, via the USB socket that comes out of the back of the unit or is that socket simply powering the dongle and the HUI is actually connecting to it over wifi using the dongle as a hotspot? If so then I don't have to use the wired usb socket from the unit (which I suspect is underpowered) and can plug the dongle into an ordinary 2A USB socket that I have in the car, positioning the dongle near the roof for a better signal
Incidentally I did try using Android Auto with my phone using wired connection. That seems sort of OK but is not very reliable. Often when starting the car it hangs at the 'connected' screen, or even at the 'trying to connect' screen, although other times it seems OK
3) There is a small socket on the left hand side of the HU that looks like a slot for a small memory card or a sim card. It is labelled 'GPS'. What is that socket used for? it is not mentioned in the manual as far as I can see. - The manual is generally a bit hand waving though, excitedly telling you what you can do but not how to do it.
(I did try the xtrons forum but not only are the last posts there around January 2022 but there seems to be no way to register for it. Hence posting here)
Is it MTCx post system info including mcu version.
Mtcb is long retired
marchnz said:
Is it MTCx post system info including mcu version.
Mtcb is long retired
Click to expand...
Click to collapse
All I know is the model is Xtrons PQS90MTVL so maybe its MTVL (whatever that is) I'm afraid I don't know what mcu means so cannot offer any version for it. Its possible I have posted this in the wrong section and have rep[osted in 'Android Head-Units'. If that is the right place and this is the wrong place, please can you delete this post