Related
Hi,
I got one xiaomi redmi 1s rebooting, I hardest but not working
, so i decided to flash, via fastboot while flashing it stops in 14%.
now phone doesn't power on, while inserting usb, it detect as qualcomm usb in device manager comport.
Need help. how to revive.
riteshgpt60 said:
Hi,
I got one xiaomi redmi 1s rebooting, I hardest but not working
, so i decided to flash, via fastboot while flashing it stops in 14%.
now phone doesn't power on, while inserting usb, it detect as qualcomm usb in device manager comport.
Need help. how to revive.
Click to expand...
Click to collapse
Try Here
Read whole first, then give a try.
presetz said:
Try Here
Read whole first, then give a try.
Click to expand...
Click to collapse
Any one please share me tested solution with easy tutuorial.
riteshgpt60 said:
Any one please share me tested solution with easy tutuorial.
Click to expand...
Click to collapse
Have you read it? If its still not an easy way as it written, than might be someone can.
Sorry just tried to help.
Good luck sir.
presetz said:
Have you read it? If its still not an easy way as it written, than might be someone can.
Sorry just tried to help.
Good luck sir.
Click to expand...
Click to collapse
Hi, I finally flash with this file "armani_global_images_JHCMIBL50.0_4.3_in_111a6a27b4" and flashing process goes fine ,after flash it says to press f8 and I press OK buttom while holding f8 and PC restart, as software
Now phone shows little bip light in home button .
And now it doesn't shows qualcomm device as well, I think, boot is repair but fastboot mode not coming.
Need help.
riteshgpt60 said:
Hi, I finally flash with this file "armani_global_images_JHCMIBL50.0_4.3_in_111a6a27b4" and flashing process goes fine ,after flash it says to press f8 and I press OK buttom while holding f8 and PC restart, as software
Now phone shows little bip light in home button .
And now it doesn't shows qualcomm device as well, I think, boot is repair but fastboot mode not coming.
Need help.
Click to expand...
Click to collapse
Try previous version than 50, might be the 45 as it stable enough, i guess.
And before that, have you charged your phone? Mi recovery wont boot if under 20% battery.
presetz said:
Try previous version than 50, might be the 45 as it stable enough, i guess.
And before that, have you charged your phone? Mi recovery wont boot if under 20% battery.
Click to expand...
Click to collapse
Hi,
After flashing v50, the phone should be working, right?
Im downloading v45, but phone is not detecting with pc . no fastboot , no qualcomm usb , How can I flash now.
thank for guiding.
riteshgpt60 said:
Hi,
After flashing v50, the phone should be working, right?
Im downloading v45, but phone is not detecting with pc . no fastboot , no qualcomm usb , How can I flash now.
thank for guiding.
Click to expand...
Click to collapse
You said the led blinking a litte red light? Try to charged first till its more than 30% batt, and connect again. See if it show in pc
Thanks done after flashing v45
riteshgpt60 said:
Thanks done after flashing v45
Click to expand...
Click to collapse
Im glad to hear that, what an awesome experienced you got isnt it? At least you can learnt something from it
Hi, I tried to flash 20b through twrp tonight.
I did factory reset, then flashed the bootstack, then flashed the system. But after that, my phone won't power on. I tried to remove the battery, holding power button for a long time, or power+volumn down.
The phone just does not respond at all. Can anybody help? Thanks!
souvenir1977 said:
Hi, I tried to flash 20b through twrp tonight.
I did factory reset, then flashed the bootstack, then flashed the system. But after that, my phone won't power on. I tried to remove the battery, holding power button for a long time, or power+volumn down.
The phone just does not respond at all. Can anybody help? Thanks!
Click to expand...
Click to collapse
take the battery out and put it back in and try to power it on. Repeat a few times, if that doesn't help we'll try other things.
Still_living714 said:
take the battery out and put it back in and try to power it on. Repeat a few times, if that doesn't help we'll try other things.
Click to expand...
Click to collapse
Thank you Still_living714, I tried this multiple times, but it does not work. Anything else I can try?
souvenir1977 said:
Thank you Still_living714, I tried this multiple times, but it does not work. Anything else I can try?
Click to expand...
Click to collapse
have you tried putting it into download mode?
Still_living714 said:
have you tried putting it into download mode?
Click to expand...
Click to collapse
If you are talking about holding volume button up and plug into computer, I tried that and the phone does not respond either...
souvenir1977 said:
If you are talking about holding volume button up and plug into computer, I tried that and the phone does not respond either...
Click to expand...
Click to collapse
hmm very weird. I had a similar problem were the phone wouldn't boot unless I had it plugged into the charger or my computer,give that a try.
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
souvenir1977 said:
If you are talking about holding volume button up and plug into computer, I tried that and the phone does not respond either...
Click to expand...
Click to collapse
when I had that problem I figured out that it was the battery that was making the phone act weird. Since LG sent me another battery when they had the promotion I used the other spare and that fixed it for me.
This happens right after I flashed the new system, I doubt it is the batter problem. If I plugged into the computer it still won't power on.
(If I remove the battery and plug into computer, the screen of the phone does show some symbol, probably regarding missing memory).
Let me try to see if I use kdz flash to reinstall the system. Thanks for the help.
souvenir1977 said:
This happens right after I flashed the new system, I doubt it is the batter problem. If I plugged into the computer it still won't power on.
(If I remove the battery and plug into computer, the screen of the phone does show some symbol, probably regarding missing memory).
Let me try to see if I use kdz flash to reinstall the system. Thanks for the help.
Click to expand...
Click to collapse
well it's hard to say but without the phone being able to boot there's not anything you can do.....
you are right, flashing need the download mode....
You're getting adnroidserial xxxx in device manager when you connect it to pc?
i think you bricked phone
jkjambo said:
You're getting adnroidserial xxxx in device manager when you connect it to pc?
i think you bricked phone
Click to expand...
Click to collapse
No it just shows regular LGE com port and I am not able to flash anything. You are right, it's hard bricked I am not sure what went wrong with my twrp flashing procedure though. Will contact with LG for repair.
souvenir1977 said:
No it just shows regular LGE com port and I am not able to flash anything. You are right, it's hard bricked I am not sure what went wrong with my twrp flashing procedure though. Will contact with LG for repair.
Click to expand...
Click to collapse
that's what i mean , lge serial xxx , don't remeber exactly . it's in qhsusb mode , hardbricked ...
there is some indian guys who do that , some for free, some for little amount of money ...
search for lg g3 unbrick Qhsusb 9008... don't waste time on tutorials , non of them works with D851 ... i'm in same boat (again ) and tried everything .. nothing works , unless you're connected to lg servers directly , search for people which fixs them
http://forum.xda-developers.com/lg-...1-d855-qhsusbbulk-t3101435/page2#post60751870
here you go.
this guy helped me for free , you can contact with him
Thanks! Currently my phone is at LG service since it is still in warranty. I will definitely try that next time (knock on wood...)
jkjambo said:
http://forum.xda-developers.com/lg-...1-d855-qhsusbbulk-t3101435/page2#post60751870
here you go.
this guy helped me for free , you can contact with him
Click to expand...
Click to collapse
souvenir1977 said:
Thanks! Currently my phone is at LG service since it is still in warranty. I will definitely try that next time (knock on wood...)
Click to expand...
Click to collapse
This is why You don't flash the boot chain unless you absolutely must. I was running 20B with the old boot chain (other than rpm, that was updated) and it ran just fine. If you get a bad flash on the boot chain your sol.
sooo, I gues something went wrong... since the new marshmallow images was posted today, there was a thread on reddit on how I can just download the image and rename it and flash it as OTA. The phone reconginzed the image and went half way through the install and then went black. now it wont even buzz or register the charger. Does nothing when connected to the computer either so I assume there is nothing that could be done. Quite a shame, the phone worked quite nicely until is killed it . Anything I can do?
Did you install it thru TWRP?
thekingestkong said:
sooo, I gues something went wrong... since the new marshmallow images was posted today, there was a thread on reddit on how I can just download the image and rename it and flash it as OTA. The phone reconginzed the image and went half way through the install and then went black. now it wont even buzz or register the charger. Does nothing when connected to the computer either so I assume there is nothing that could be done. Quite a shame, the phone worked quite nicely until is killed it . Anything I can do?
Click to expand...
Click to collapse
There is one thing I recommend trying as there is a bug in official firmware where the phone when connected to a computer can turn off randomly and not charge or boot. What you need to do is disassemble the phone and unplug the connector at the top of the phone to disconnect the battery and then plug it in.
krazy23 said:
Did you install it thru TWRP?
Click to expand...
Click to collapse
no, the phone picked up the update from the internal storage
dc959 said:
There is one thing I recommend trying as there is a bug in official firmware where the phone when connected to a computer can turn off randomly and not charge or boot. What you need to do is disassemble the phone and unplug the connector at the top of the phone to disconnect the battery and then plug it in.
Click to expand...
Click to collapse
thanks, I'm aware of that. Some folks experiencing the same issue tried that with no success. My phone is still under warranty and the screw securing the backplate has a seal on it that I dont want to tamper with.
I guess I'll be sending the phone for to Asus for repair...
Don't lose hope.
My phone was in a similar predicament.
No response to any buttons, nothing on screen, no buzzing or LED's at all.
I was able to get it recognized in the xFSTK Downloader and showing up in windows device manager as a Moorefield device.
I tried many times to get it to put the images on the phone through the xFSTK tool and it failed many times.
I was about to give up and tried again this morning and miraculously the writing succeeded and now my phone is in a bootloop (I think the battery may have been completely drained with my attempts to save it's life.)
I have it on charge currently so hopefully when there is enough juice I should be able to flash the raw file and be back up and running.
I see, you can follow the unbricking tutorial in the general section. Works fine for me and saved me from sending it to the service center.
krazy23 said:
Did you install it thru TWRP?
Click to expand...
Click to collapse
I did! And now my phone is dead! But it buzzes when I press the power button for some seconds.. But it's always black
galagala2 said:
I did! And now my phone is dead! But it buzzes when I press the power button for some seconds.. But it's always black
Click to expand...
Click to collapse
That's what happened to my phone, you can follow this thread this worked for me. Unbricking Method
krazy23 said:
That's what happened to my phone, you can follow this thread this worked for me. Unbricking Method
Click to expand...
Click to collapse
do you lose the data this way?
thekingestkong said:
do you lose the data this way?
Click to expand...
Click to collapse
Unfortunately, yes. Because I ticked the "wipe data" checkbox in the ASUS Flash Tool. Not sure what will happen if I don't. :fingers-crossed:
http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfon
I also bricked my phone and used the method to fix my phone. Make sure you have all the required drivers installed in your pc/laptop before doing this. I took help of DriverMax to solve the drivers related issues. Make sure before installing and running the XFTSK tool all the drivers and everything is installed otherwise you will see blank forms in the Tool.
i installed cm14.1 today from the cyanogenmod website i had everything running fine until i reboot into recovery. i got a black screen and it didnt bot into recovery at all so i held my power button and volume down and nothing happens. i cant even boot up into fast boot or anything. nothing is turning my phone on. when i connect it to my pc nothing happens. is there anything i can do?
There's a mega unbrick guide for the OnePlus 3, use that then install the correct firmware and install the custom TWRP and re flash the ROM
i tried that method but the device doesnt even show up on my pc
envious86 said:
i tried that method but the device doesnt even show up on my pc
Click to expand...
Click to collapse
Get this sorted yet? You'll need a modified TWRP recovery for the newest CM based builds. I went through the same thing yesterday or the day before. Try holding volume down and power for like 30 seconds until you feel it vibrate that it is rebooting. Then hold volume *UP* while it reboots or if you see the "your device is not safe..." flash screen hurry and press volume down and go into fastboot. From there you can fastboot flash a new recovery.
I had the same problem as well, in device manager go to ports (com & LPT) and it will show up there under qualcum device. Don't forget to go and turn off certificate verification
Thanks guys I'll try this after work. Hopefully it works. If not sure oneplus are hopefully releasing a new phone soon
No it didn't work. I have a feeling I deleted something I shouldn't have because I was clearing out my files before I restarted and that was that.
you gotta use special twrp recovery for cm14.1...
https://www.androidfilehost.com/?fid=385035244224394867
Just use the recovery rahditzz provided you with a link, if your phone is stuck on black screen with white led hold your power button until it turns off, then boot to fastboot and flash the recovery and you will boot...
rahditzz said:
you gotta use special twrp recovery for cm14.1...
https://www.androidfilehost.com/?fid=385035244224394867
Click to expand...
Click to collapse
thanks didnt work. when i fastboot flash recovery and boot again it just goes into a black screen again
Then use unbrick method 2..
rahditzz said:
Then use unbrick method 2..
Click to expand...
Click to collapse
neither method works. all i can do is get into fastboot mode thats it. it wont show up on my pc at all
Method 2 workshop 100%, unless its a hardware fault..
Are you pushing volume up while plugging in cable?
I am. To be honest its very complex too me. I'm new to android and all this is so hard. I follow steps but I'm not 100% sure what I doing. Also my computer isn't great. Do these methods work on vista? Is there a video tutorial or anything? Sorry for annoying you and you don't understand how thankful i am for your help.
I jeep getting the sahara communication failed error
envious86 said:
I am. To be honest its very complex too me. I'm new to android and all this is so hard. I follow steps but I'm not 100% sure what I doing. Also my computer isn't great. Do these methods work on vista? Is there a video tutorial or anything? Sorry for annoying you and you don't understand how thankful i am for your help.
Click to expand...
Click to collapse
Your running vista???? Good god update your OS!!
Maybe your fastboot drivers got updated? There were some reports around this. You could try reinstalling the drivers and following the unbrick guide without an internet connection.
Sent from my ONEPLUS A3003 using Tapatalk
Cool u can boot into Fastboot, what error do you get when you type Fastboot devices? Nothing shows up?
First things first, NEVER RESTORE A TWRP BACKUP YOU CREATED IN ONE VERSION IN ANOTHER VERSION.
Now coming to my situation, I installed the Deodexed Stable Zui Oreo ROM but as usual got bored with the zui and wanted to go back to my fav Pixel experience Rom so I clean flashed it from the unofficial hendibudi recovery but I couldn't use my internal storage and I once earlier read in another thread that installing 3.0.3 decrypts it so I installed that recovery and clean flashed AEX5.2 Rom this time and same internal storage problem continued so my lazy ass thought I'll restore the TWRP backup I created when I unlocked the bootloader instead of flashing through qfil and that was my mistake.
I created the backup on 3.1.0 but now I was on 3.0.3 so as soon as I restored the backup and rebooted, my phone didn't turn on, no zuk logo or led or anything, if I long press the power button it just vibrates and the led flashes for a sec, that's all.
Edit: feels like this thread belongs to the News/Discussions section than here but meh
Edit2: Solution in Post #4
It seems like qfil, mi flash method is last as your bootloader is also corrupted, and this happens because there are many critical hidden partition on our device so it mess up, when you install first twrp releases, you will notice there are 7 8 partition and in latest one they all are hidden.
narshi shukla said:
It seems like qfil, mi flash method is last as your bootloader is also corrupted, and this happens because there are many critical hidden partition on our device so it mess up, when you install first twrp releases, you will notice there are 7 8 partition and in latest one they all are hidden.
Click to expand...
Click to collapse
well if it's that easy I wouldn't be worried at all but unfortunately my situation is a bit different, I can't flash anything as my phone is recognized as 900E, to flash anything the phone should be recognized in 9008(edl) mode and for that I have to strip the cable and short circuit with it and all that, which is really a hit or miss kinda situation so kinda worried!
But seems like I have no other choice so let's see what happens, I tried stripping the stock usb cable and it got split into half lmao
now I'll buy another cable and will try the copper wire method instead of splitting it
Edit: yeah ik that different versions of TWRP are different but I wanted to restore only the data partition and my data was already encrypted so I thought I have nothing to lose, I was like if it doesn't work I'll flash the full firmware again but didn't expect it to fully brick the phone
Okay the primary reason for me creating this thread was to let y'all know how I bricked my device so that y'all won't repeat my mistake but I saw some people here and there recently asking how to resurrect their device so thought I'll share how I got mine working wishing it'll help such people.
My phone was completely dead, the hardware buttons weren't doing anything, the phone doesn't power off but all I could see was a black screen, so I had to follow THIS GUIDE.
But the above situation is a rarity, I guess most of you ppl could get to the zuk logo or your led keeps flashing and you can use your hardware buttons, in such situations, follow THIS GUIDE.
The above links are for you to get your phone to 9008 mode to be able to flash the stock firmware, but if you don't know how to flash,
refer THIS GUIDE.
Flashing problem
i got phone into 9008 port following ur guide and installed qfil everything went good problem is after hitting download buton in qfil after some time it says error "sahara failed".
seetharam55555 said:
i got phone into 9008 port following ur guide and installed qfil everything went good problem is after hitting download buton in qfil after some time it says error "sahara failed".
Click to expand...
Click to collapse
Only one solution is there.. after u get sahara error.. disconnect your phone and cable, then again turn your phone on. And then turn it off... After that press volume up+ power button simultaneously while connecting to the usb port, if you are successful, within 2-3 seconds you have to press the download button on QFIL.. then it should work... You can try 2-3 times... For demo, but thia is the only way out of this hard brick
.. i suffered in the sahara error for 3 days since i flashed OOS on my z2 , till today i finally got the solution
sidS6 said:
Only one solution is there.. after u get sahara error.. disconnect your phone and cable, then again turn your phone on. And then turn it off... After that press volume up+ power button simultaneously while connecting to the usb port, if you are successful, within 2-3 seconds you have to press the download button on QFIL.. then it should work... You can try 2-3 times... For demo, but thia is the only way out of this hard brick
.. i suffered in the sahara error for 3 days since i flashed OOS on my z2 , till today i finally got the solution
Click to expand...
Click to collapse
thanks for response.What do u mean by "succesfull".and other thing to turn off the phone it takes me nearly 2 min constant pressing of power button, is this normal.
seetharam55555 said:
thanks for response.What do u mean by "succesfull".and other thing to turn off the phone it takes me nearly 2 min constant pressing of power button, is this normal.
Click to expand...
Click to collapse
Not 2 minutes but i think 30 seconds at max.. and by successful i mean that you get into Qualcomm 9008 qdloader mode in qfil
---------- Post added at 05:13 PM ---------- Previous post was at 05:11 PM ----------
The main thing is you have to immediately press the download button(within 2-3 seconds) after reconnecting into 9008 mode
Briked my phone flasing oos, solved it in the first go usimg qpst method.
Rahil4321 said:
Briked my phone flasing oos, solved it in the first go usimg qpst method.
Click to expand...
Click to collapse
You didn't got Sahara error?
seetharam55555 said:
thanks for response.What do u mean by "succesfull".and other thing to turn off the phone it takes me nearly 2 min constant pressing of power button, is this normal.
Click to expand...
Click to collapse
Were u able to unbrick?
Thanks
sidS6 said:
Were u able to unbrick?
Click to expand...
Click to collapse
yes it worked but as u said we have to hit download button within 2 sec....thank you very much u nearly saved 1000 rupees for me.
seetharam55555 said:
yes it worked but as u said we have to hit download button within 2 sec....thank you very much u nearly saved 1000 rupees for me.
Click to expand...
Click to collapse
Congrats bro! But i lost my 3 cables in ths process.. that equals 700 rs.. but i learned a great lesson? no probs
seetharam55555 said:
i got phone into 9008 port following ur guide and installed qfil everything went good problem is after hitting download buton in qfil after some time it says error "sahara failed".
Click to expand...
Click to collapse
dude just cut the cable and make intersection betwwen vlack and gree wire and put the cable into phone , got edl mode simple ways
sidS6 said:
Congrats bro! But i lost my 3 cables in ths process.. that equals 700 rs.. but i learned a great lesson? no probs
Click to expand...
Click to collapse
Why did you wasted 3 cables for?
seetharam55555 said:
Why did you wasted 3 cables for?
Click to expand...
Click to collapse
Coz while spliiting, one got split into half ? and the other one got bent so it was unusable.. i had buy the third one
sidS6 said:
Coz while spliiting, one got split into half ? and the other one got bent so it was unusable.. i had buy the third one
Click to expand...
Click to collapse
Ohh you tried that method i did like this
sidS6 said:
You didn't got Sahara error?
Click to expand...
Click to collapse
You don't need to flash via qpst when you see logo but device wont boot it mean you locked your bootloader so all you need to do is unlock it again that's all
Nirmal0001 said:
You don't need to flash via qpst when you see logo but device wont boot it mean you locked your bootloader so all you need to do is unlock it again that's all
Click to expand...
Click to collapse
Unfortunately learnt this after unbricking my device
I had installed RR mix rom in my Zuk Z2 plus. while trying to enter fastboot mode, it went off. Now it is completely dead. not being recoganized in my PC.In device manager it is not shown. Tried to deep flash through Qfil, but didn't recoganize port.If i plug in charger also no LED indication, If I disconnect battery & plug in for charging, white LED slowly blinks, in the same mode if I connect charger blinking white LED continues. But once I remove charge & reconnect it shows nothing. again if I remove battery & reconnect, again white LED starts blinking. Apart from this nothing is shown, phone completely dead. Can anybody help please. I tried through Qfil, tried by shorting black & green cable, all types of key combinations.