Develop Bugs

Huawei G510 - Solved - Cannot connect to the camera

This document shows how solve problem "cannot connect to the camera" after ROOT Huawei G510-0010 with B165 boot.img.
1 - Requeriments:
- Download Google adb-toolkit - http://www.adbtoolkit.com/
- Download boot.img, better if you use same version of your firmware (mine is B182)
You can find firmware version on Settings -> About Phone
http://www.toplinetec.com.br/pub/other/boot_g510_B182.zip
2 - Connection with PC
- Install ADB drivers for your device on PC.
- On device, disable Settings -> Fast Boot
- Turn off device, wait some seconds, turn on again pushing volume down and start button for 10 seconds and connect to USB.
- Unzip files to C:\, go Windows Prompt (CMD), and follow next commands:
- cd\adb-toolkit\bin\files
- fastboot devices (if return a code in next line, is because your device is connected)
- fastboot flash boot c:\boot.img
- fastboot reboot
The whole process should look something like this in your CMD:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
References:
http://forum.xda-developers.com/showthread.php?t=1752270
http://forum.xda-developers.com/showthread.php?t=2315932

Issue on Install Boot
Hi, thanks for your post.
i followed all steps, but, when i install the boot.img to my device it returns me this:
sending 'boot': OK
writing 'boot': Failed (remote: command not allowed)
Do you know, by chance, why is it failing?
Thank you very mutch.

re: Issue on Install Boot
MosKRt said:
Hi, thanks for your post.
i followed all steps, but, when i install the boot.img to my device it returns me this:
sending 'boot': OK
writing 'boot': Failed (remote: command not allowed)
Do you know, by chance, why is it failing?
Thank you very mutch.
Click to expand...
Click to collapse
I don't know exactly, but did you ulnlock boot loader before ?
Is a good option to start.
Follow these steps:
1 - See entire model behind phone battery: G510- (0010, 0100 or 0200).
2 - Request unlock code for Huawei
huaweidevice.com/worldwide/servicePolicy.do?method=toApplyUnlock
If you phone is 0010, you'll need to find chinese site for this.
3 - Apply code
huaweidevice.com/worldwide/servicePolicy.do?method=getUnlockStep
PS: put www before links, because I can't post.

Solved
Hi again!
Yes you was right, the problem was that i didnt unlock the boot loader. I found some problems for do that.
The problem was that they don't have the 0010 model listed in their site and, a chinese site for ask it dosen't exists (I've gone crazy looking for it :crying: :crying
I had to send an email directly to Huawei support channel whit the mobile data (IMEI, S/N, model, ...). They answered me in 48h more or less with the unlock code.
And after that all was perfect. :highfive: :highfive:
shalonbr said:
I don't know exactly, but did you ulnlock boot loader before ?
Is a good option to start.
Follow these steps:
1 - See entire model behind phone battery: G510- (0010, 0100 or 0200).
2 - Request unlock code for Huawei
huaweidevice.com/worldwide/servicePolicy.do?method=toApplyUnlock
If you phone is 0010, you'll need to find chinese site for this.
3 - Apply code
huaweidevice.com/worldwide/servicePolicy.do?method=getUnlockStep
PS: put www before links, because I can't post.
Click to expand...
Click to collapse

Link not working ...
cany anyone upload
..

[SM-T310]Frequently Asked Questions

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This a short list of frequently asked questions about the Samsung Galaxy Tab 3 8" (SM-T310) and the answers often given as a response. It should serve as a starting point for gathering knowledge and finding solutions to many common problems. Please only post in this thread with feedback on how to improve this document. Do not post "Thank you" type responses.
Do not use this thread as a general helping thread.
Q1: How do I root my SM-T310?
First you're gonna need a custom recovery installed.
Download the following files to your computer: Odin, TWRP, Root
Extract Odin into a new folder and then TWRP in Odon's folder. After that's done start the Odin tool and put your device into download mode. To do this, power it off and hold the Home + Volume Down + Power buttons until you see the warning screen.
Once that's done, connect your device to your computer and wait till Odin recognizes it. If it doesn't usually an installation of Samsung Kies would fix it.
After the device is recognized sucessfully click on the PDA button in Odin and navigate to the TWRP file location and load it.
Wait for the PASS message and reboot your device. (Without disconnecting it)
Once done, boot into TWRP and hold your device in portrait mode, tap Reboot on the bottom right of the screen and then select System on the next menu.
Once you do this you will be asked to install root. If that doesn't work for your, copy the Root zip file to your SD Card, boot into TWRP and flash it as a normal zip.
Click to expand...
Click to collapse
Q2: How can I enter recovery?
To enter recovery, power off your device and hold Power + Volume Up buttons untill you see the Samsung Galaxy Tab 3 splash screen and let off the Power button untill it boots you into recovery.
Click to expand...
Click to collapse
Q3: Which is the best ROM/Kernel?
Honestly, there is no "best". It's all based on personal choice. For example; I may like heavily customizing my ROMs whereas you may like it to look at basic as possible. The best thing you can do is to just test out different ROMs/kernels/modems and see which you prefer.
Also, please don't ask which is the best because your post will be deleted as it's against forum rules.
Click to expand...
Click to collapse
Q4: Am I required to backup my data before flashing anything?
No you're not, but it is definitely a good idea, especially when flashing a ROM with an updated base, because if you don't do a backup and then something goes wrong, it means that you'll lose all your apps, data etc.
Click to expand...
Click to collapse
Q5: Does this device have a good battery life?
We all have different apps installed, use our phones for different amounts of time, have different ROMs and kernels installed etc. so we will all experience different results regarding battery life.
Click to expand...
Click to collapse
Q6: I'm not sure whether to get the Samsung Galaxy Tab 3 8"/what other tablets compare to the Tab 3 8"?
The only person who can make you want the device is you. If you're not sure whether to get this tablet, go to your local devices shop which has stock and have a test run of it for yourself. If you're not sure what device to get and want to compare between your choices, please use the following thread - Device Suggestion Thread
Click to expand...
Click to collapse
If you have any suggestions regarding this thread's content, feel free to post them.​

+1 For this Mate. :thumbup:

[Recovery] Recovery Installer for Find 7

Hi Guy,
There are easy way to install recovery to Oppo Find 7.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Just download & run.
- Connect your device to computer with fastboot mode.
(Power off your device. Press Volume up and hold then press Power on)
- Choose options.
- All done.
*This package include Oppo USB driver.
Download:
Recovery Installer for Find 7 with Oppo USB driver
Update July, 22 2014 add TWRP recovery for Find 7 standard.
Update July, 20 2014 add Stock recovery for ColorOS 1.2 Build 0625 or latter versions.
Update July, 18 2014 add boot options don't need to install just boot to select recovery.
Credit. Zeus, Openrecovery TWRP Team & CWM philz touch Team.

Again, incredibly easy and helpful. Should definitely be pinned.

Easy.....even for newbies!!
TOP!!

will this work for find 7a? can anyone confirm that?
thanks :good:

cjlai said:
will this work for find 7a? can anyone confirm that?
thanks :good:
Click to expand...
Click to collapse
It posted on Find 7a thread. So, YES!.

No1 stuff thanks !

I will try this tomorrow!!!!

I tried to root my oppo find 7 (x9076) with this program but it keeps saying 'waiting for device'. how can i fix this problem?

- Connect your device to computer with fastboot mode.
(Power off your device. Press Volume up and hold then press Power on) you'll see fastboot on your screen after this, connect it to your PC

Super TOOL , thank`s a lot ... :good:

KL643 said:
- Connect your device to computer with fastboot mode.
(Power off your device. Press Volume up and hold then press Power on) you'll see fastboot on your screen after this, connect it to your PC
Click to expand...
Click to collapse
Or:
adb reboot bootloader
Sometimes hardware button not working me...

Had to use this app yesterday and it worked great. Thanks for the app!

Q?
Any chance if come new version ,support unified mod TWRP recovery?
http://www.oppoforums.com/threads/tutorial-unified-storage-layout-for-oppo-find-7a.17952/
Thanks.

Worked as a charm.
Is it wise not to install it and only run it from PC?
I would prefer to boot the phone in twrp mode.
A

Sorry for bumping, but I hope somebody can guide me to a conclusion. Should I make make this twrp a default boot option or should I always enter it from a PC.
My wish is to have this as a default part of booting
torsoen said:
Worked as a charm.
Is it wise not to install it and only run it from PC?
I would prefer to boot the phone in twrp mode.
A
Click to expand...
Click to collapse

torsoen said:
Sorry for bumping, but I hope somebody can guide me to a conclusion. Should I make make this twrp a default boot option or should I always enter it from a PC.
My wish is to have this as a default part of booting
Click to expand...
Click to collapse
The only thing that must be run from a PC is the tool in the OP.
The tool then installs the recovery on your phone.
A recovery is NOT part of the boot or of the ROM you are using.
Once installed, if you want to directly access your recovery, either :
_ Power off your device.
_ Press and hold volume down, then press Power on until the Recovery screen comes up.
Or
_ From the ROM's Settings, in the System menu, go into the the Developers options.
_ Enable Advanced Reboot option.
Then, you can press the power button until the reboot menu appears and choose to directly reboot to Recovery.

Notice: Improvements to 10 Post Rule
A New Q & A thread has been created in the Q&A, Help & Troubleshooting Sub-Forum, for This Topic.
New Discussion and Q & A Tabs have also been created, located just under threads Title when viewing in a Browser.
Posts from members with less than 10 posts will automatically be posted in the new Q & A thread.
Please check it out, and see if you can help out someone with a question about this Topic.
For more about this new feature see: Improvements to 10 Post Rule

This installer saved me.
Thanks for your work.

No more available for download...
Anyone has a clue how to find this tool?

Dead link!

How To Guide Root_And_Install_Twrp_On A225X / A22-4G_Android-12_Binary-3

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hlw A225F (A22 4G) users. We have unofficial twrp for our A225F devices that was made by Cheese-ass ( xda developer ). He is a great man because he did something for us but unfortunately his twrp was unable to boot android 12 oneui 4.1 . But after research i got solution. Today i am going to share how to run android 12 with Cheese-ass unofficial twrp .
## Note : You must need android 12 and binary 3 firmware installed. Because i take file from binary 3 firmware .( But you can check my method for testing) . I think this method will use other Samsung devices. I am not sure and responsible.
1 : You need pc , Samsung usb driver , latest odin3 ,android 12 installed A225F device and my given files. ( Cheese-ass recovery is included).
2 : First remove Samsung and Google account from your device and unlock bootloader. You need to remove frp lock and oem lock and kg state must be checking or broken on download mode.
3 : Then install Samsung usb driver on your computer and run odin3.
4 : Now go to download mode and flash the tar files.
Dont try to boot your device. After flash device will reboot but don't do this . Immediately press power button and volume up button and go to twrp recovery otherwise stock recovery will restore.
5 : Now go to wipe / format data option and type yes and go. Now reboot recovery and go to twrp terminal and type multidisabler and run two times. It will remove data encryption .
6 : Then mount vendor if not mounted. Now need to remove stock recovery from vendor. On android 12 Samsung removed stock recovery restoration from system to vendor. So after run multidisabler in terminal go to vendor partition and delete recovery-from-boot.p and reboot your device. If not deleting then unmount vendor and system and run multidisabler again and try to delete or try mount , unmount vendor and try to delete.
Root File Link : https://drive.google.com/file/d/1-UpDQeLK1jzyruTqJ_AIXFJiRB-K-T0q/view?usp=drivesdk
Twrp and vmeta disabler owner [ credit ]: https://forum.xda-developers.com/m/cheese-ass.8336327/
{Mod edit: Telegram links removed - Oswald Boelcke, Moderator}

Abdullah AL-Noman said:
{Mod edit: Telegram links removed - Oswald Boelcke, Moderator}
Click to expand...
Click to collapse
@Abdullah AL-Noman
I've changed the prefix of your thread from "Development" to "How To Guide" as it didn't qualify for the first one. Prior to your next posting please read the guidances and announcements that are stuck at the top of every forum like:
⚡⚡PLEASE READ! XDA Rules & Forum Moderators ⚡⚡
Please be respectful and observant of all XDA rules, as well as towards each other. Please use the links below if you have any questions about content you wish to post, or need help from the Moderator Staff. Best Regards: Your Friendly...
forum.xda-developers.com
Additionally, I've removed the links to Telegram from the OP. Regarding social media links please observe that as an exemption from the last bullet of rule no. 5 of the XDA Forum Rules, we grant only developers the privilege to share references to their social media in their own development threads and if thorough support is provided in the thread. These conditions obviously don't apply to this thread. Additional information is also available here:
Telegram Chat Channels - Way Forward
WhatsApp/Telegram Groups and Channels - Going Forward Hello XDA family! Just notifying all members that posting certain links to Telegram and other sites like WhatsApp is now allowed on XDA. What does that mean? We will allow links to messages...
forum.xda-developers.com
Same as above applies to your threads here and here. Please refrain for sharing of social media references unless within your own development threads!
Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator

Question Need help disabling app detecting root on Samsung S22

Hello everyone,
I'm new to rooting and I could use some guidance regarding how to prevent apps from detecting that my device is rooted. I have a Samsung device and I've already tried using Island by following this guide here. However, that did not seem to do the trick.
Additionally, I've explored Magisk's built-in Deny List feature, but it hasn't solved the issue for me.
I am based in Singapore and the app in question is Singpass. I have read comments from other forums such as this and this but am not sure if the methods still work. If they do, could anyone help me with a step-by-step guide? Also, would this method work for any and every app?
I've also heard about Magisk Alpha, but I'm not sure how to get started with it. If anyone could provide some instructions or point me towards a reliable guide, I would greatly appreciate it. However, I must admit that I'm not very familiar with technical jargon, so I hope the guide isn't too complex.
I need this app to function as I need to sign in to government apps for official reasons in late June.

You can't hide the fact Android is got rooted, if this is true. It's easy for every app, so also payment / banking apps, to detect whether Android is got rooted or not.

If you had read the Forum Rules, you would have noticed that we have device specific sections. This is covered under Rule 5.
As a courtesy, we will move your post to the correct area.
Is your device the S22, S22+, or S22 Ultra?

V0latyle said:
If you had read the Forum Rules, you would have noticed that we have device specific sections. This is covered under Rule 5.
As a courtesy, we will move your post to the correct area.
Is your device the S22, S22+, or S22 Ultra?
Click to expand...
Click to collapse
S22

Have you checked your Play Integrity response?
See this thread

V0latyle said:
Have you checked your Play Integrity response?
See this thread
Click to expand...
Click to collapse
How do I check that?

Sorry, didn't see the linked thread. Here's the response.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I have a other Solution it works at S10 LineageOS20!!
1. Ya need Lygisk/Magisk newest Version Magisk 26.1 github
2. Ya need SafetyNetFix SafetyNetFix github
3. Ya need MagiskHidePropsConf MagiskHidePropsConf github
The Easy Way to Hide Root from Apps!!
-Install Magisk.apk App from /sdcard/ and start Magisk App
-go to Settings and Enable "Zygisk" Option
-Setup the Denie-List with Apps you would hide Root (Especially Banking-Apps and other the dont start in Rooted-Device)
-Setup "Hide-Magisk-App" and choose a name 4 the new Shortcut
-Now The App starts again
-goto Modules and choose "Setup from Internal_storage" and Install "MagiskHidePropsConf-v6.1.2.zip" & "safetynet-fix-xxx.zip" One after a other than Reboot the Device!!!
-After reboot the Device
-Now Setup a Terminal_Emulator/Termux/etc.. from PlayStore!!!
-open your Terminal on Android and Type the following command
su
props
choose 1
choose f
choose your Device in next 2 Steps!!
(Samsung - 26 / Galaxy Tab A 10.1 2019 - 84)
choose y
choose y to reboot Device!!
-After Reboot open Settings and go to Apps
show all and choose
1# Google-PlayStore and Clear Stored-Datas/ Clear Cache
than goto
2# Google-PlayServices and Clear Stored-Datas/ Clear Cache
-Now you can Download "YASNAC SafetyNet Checker" from Playstore and can Check the Status!!!
-Finish!!!!!!