Develop Bugs

[ROM][VOLTE][UNOFFICIAL][9.x]LineageOS 16.0[ZC550KL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo.
GPL compliance:
Device tree source code: https://github.com/YaAlex3/android_device_asus_qcom_common
Kernel source code: https://github.com/YaAlex3/android_kernel_gunmetal
Working:
Camera (and flashlight)
WiFi
Bluetooth
Telephony (Calls and Data)
Audio (Record and Playback)
Video Playback
Sensors
GPS
VoLTE
Not working:
So far everything works.
Compatibility:
Compatible with all variants of Asus ZenFone Max ZC550KL
Builds are based off the Xiaomi's Android 9 firmware with proprietary blobs.
Downloads:
Unofficial builds (OTA supported)
Notice:
No custom kernels are supported in this thread. Only stock kernel and official builds will be supported. No bug reports if that's not the case.
Installation:
Reboot to recovery (TWRP recovery for Mi 8)
Format /system, /data and /cache
Install Marshmallow based firmware.
Install LineageOS zip package
Install [optional] a Google Apps package of your choice (Open GApps is advisable, but stock and super variants are not recommended!!!)
Important notes:
* Required * firmware version must be MARSHMALLOW
GApps can only be flashed on clean installs.
Magisk can only be flashed after first boot
XDA:DevDB Information
LineageOS 16.0 for Asus ZC550KL, ROM for the Asus Zenfone Max
Contributors
YaAlex, SakilMondal, TechNova
Source Code: https://github.com/LineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Marshmallow Bootloader/Modem
Based On: LineageOS
Version Information
Status: Beta
Created 2019-12-08
Last Updated 2019-12-08

Do you really mean this requires installation of TWRP recovery for Xiaomi Mi 8 on the Asus Zenfone Max (ZC550KL)?
Please would you kindly provide the link of the version of TWRP recovery for Xiaomi Mi 8 which also works for Asus Zenfone Max (ZC550KL)?

Offline charging fixed?

VoLTE is not working.
Please tell how to enable it. I have enabled the LTE option in Mobile Networks. Data works fine in LTE mode but not voice. How to get that working? I use Jio in India.

I dont think so
aeioo said:
Do you really mean this requires installation of TWRP recovery for Xiaomi Mi 8 on the Asus Zenfone Max (ZC550KL)?
Please would you kindly provide the link of the version of TWRP recovery for Xiaomi Mi 8 which also works for Asus Zenfone Max (ZC550KL)?
Click to expand...
Click to collapse
I installed it with TWRP recovery for Asus Zenfone Max. It installed successfully. Only VoLTE is not working. Rest is perfect.

maximus786 said:
I installed it with TWRP recovery for Asus Zenfone Max. It installed successfully. Only VoLTE is not working. Rest is perfect.
Click to expand...
Click to collapse
I installed with TWRP recovery 3.3.1-0 for Asus ZenFone Max by YaAlex after flashing service official firmware WW_ZC550KL_V13.8.26.92 (Marshmallow). The first problem I found is that the unit cannot be powered off normally. After long press of power button and selected "Power off", the phone shut down but restarted automatically after about 10 seconds. I wonder if anyone also face this problem.

Same here also
I also noticed the same but for me this not a serious issue. It is benefit only that phone would always stay ON. My issue is with VoLTE. How to solve that?

Does this ROM support the version of ZC550KL which has MSM8916 SoC?
Or is it for MSM8939?

cleshera said:
Does this ROM support the version of ZC550KL which has MSM8916 SoC?
Or is it for MSM8939?
Click to expand...
Click to collapse
This ROM can be installed on Z010D. If you intend to install it on Z010DD, you may consider following this guide.

Really osum...bugs (down)
Pros :
Everything working...
Jio network works without flaw #india #volte
No volte icon available!!!
Suggestions:
I hope you can give regular security patch updates...
Kindly help us by making a kernel with fast charging
The default gunmetal kernel seems good but charging speed didn't change a lot...
Bugs
Restart issue ...
Signal weak (but not a major issue)
---------- Post added at 09:13 AM ---------- Previous post was at 09:11 AM ----------
maximus786 said:
Please tell how to enable it. I have enabled the LTE option in Mobile Networks. Data works fine in LTE mode but not voice. How to get that working? I use Jio in India.
Click to expand...
Click to collapse
Try in sim 1 slot...am using jio

It seems to me that USB connection (connect to PC and also OTG) does not work. Magisk can be installed successfully but magisk manager does not detect root access request from Apps. Would anyone please kindly help to verify these?

Please upload Marshmallow based firmware

Will it work on snap dragon 615 model of zenfone max?
these asus fools made different phones of same model no. And names...

Link down, please reupload.
Regards,

No ROM seems to work
Hi there,
I tried to install this ROM (and 4 or 5 others) and no one works after a dozen hours of work. The model is a Z010DD written on the battery, but ASUS confirmed me that the ZC550KL is the commercial denomination, so it's the same thing.
When I installed TWRP 3.1.1 on the Zenfone Max, TWRP couldn't mount the filesystem: it asks a password. I tried default_password, doesn't work.
I couldn't even restart in normal mode, I had a black screen, and when I connected the USB cable, I had a lot of popup on the Explorer Windows saying that the local disk has a problem (local disk H: I: J: K: L: etc...)
When I saw that, I thought I had no choice than wipe the phone like a factory reset (with no Backup ) in TWRP, and then install the ROM.
But I had a black screen after reboot.
I tried the CleanMax ROM (it works until it asks a WIFI connection which doesn't find any WIFI and I can't go further), the Resurrection Remix ROM (black screen), the LineageOS 15 ROM (black screen), the ASUS official firmware (black screen), nothing works.
I did an advanced wipe by wiping all filesystems and tried again: same problems.
So I dug to find that I can repair the filesystem. Bingo, the system partition had a problem during the check. I repaired the other filesystem (data, cache), and the repair of the system partition was OK then.
I retried all the ROM installation -> same problems
I tried another thing: convert each filesystem to ext2, and then revert to ext4 and retry the ROM installations.
Same problems...
Does anyone have an idea to help me to make a ROM work on this device?

what happened to that link? not found...What happened to the updates/?

does anyone have the full rom??

Hi guys.
I'm here after a lot of time using lollipop and mm stock ROM, after a custom oreo based rom, now I'm using clean max, mm based rom.
The problem for all mm rom, Is a bug I experienced using stock android 6,0 and clean max, when I've battery less then 40% and I try to shot a photo, my phone get shot down because marshmallow says my battery is at 0(from 40%). Not true. If a push power button to restart, still battery at 0, android can't start. If I put battery on charging , battery is ok and say 40 % a real value , infact I can use my ZenFone for hours... I tried several pie based rom and I think this bug doesn't exist. But all of them has a bug with shutdown, every pie rom if I shutdown my ZenFone restart the phone, so I'm unable to shutdown. All others things are ok. No visible bugs a part the shutdown one . Question, does exist a custom pie or oreo ROM , without visible bug? In meantime I tried to come back to lollipop stock(without battery percentage problem).. But I've an error at recovery and I'm forced to use clean max or other custom ROM 6.0 based with that strange battery bug. Thanks for your attention.
Edit
Solved using last lineage.
Definitive rom
Perfect!

Hey y'all, first time poster here so my apologies if this is a dumb question.
Any word on whether this ROM is compatible with the ZB555KL model? I've got a spare one of these sitting around, so I'll take my usual approach of "press the button and see what happens" unless the answer is "definitely not."

Update download link please. it's down.

[ROM][UNOFFICIAL][OTA] LineageOS 17.1 for Redmi Note 9S/Pro/Pro Max/POCO M2 Pro

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: this ROM will not receive any further updates from me, my last build will be 20210210.
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's not working:
Widevine L1
Some users may face "idle freeze" bug (phone reboots after a few minutes with the screen off). If it happens try to change kernel.
Instructions:
Download the latest build and gapps (optional)
Reboot to recovery
Wipe cache/dalvik and format data
Flash the latest build and gapps (optional)
Reboot
Downloads:
LineageOS
Lineage Recovery (optional, you can use any custom recovery)
mauronofrio's TWRP (recommended for OTA, read instructions below)
GApps (OpenGApps arm64 10.0 nano recommended)
Firmware for curtana, joyeuse, excalibur, gram
Channel where I post updates about my stuff
OTA Instructions:
Installing updates automatically from the Updater won't work, so follow these instructions if you want to update via OTA - If you have encrypted /data Lineage Recovery won't work, use TWRP/PBRP/OrangeFox:
After downloading the update, long press on it and tap "Export update". The zip file will be exported to /data/lineageos_updates
Reboot to recovery and enter decryption password if necessary
Tap "Install" (not necessary on OFox), browse to /data/lineageos_updates and select the zip file
Install the zip, wipe cache/dalvik and reboot.
Open the Updater, long press on the update and tap on "Delete" (optional)
Notes:
Read the instructions above for OTA updates!
GApps not included
ANXCam v190 works with all features
SafetyNet should always pass, if not use MagiskHide
The build codename is curtana but the ROM and recovery are unified for all miatoll devices
If you use Lineage Recovery make sure to mount /system before flashing GApps and Magisk
If you want Magisk flash it after first boot
If you want to update the ROM, make sure to disable ANXCam before flashing, you can re-enable it after the update
Use latest global firmware for curtana and joyeuse, Indian firmware for excalibur and gram
Source code:
LineageOS
Device tree
Kernel source
Vendor tree
Thanks to everyone that contributed to the original xiaomi-sm6250-devs trees
XDA:DevDB Information
LineageOS 17.1 for Redmi Note 9S/Pro/Pro Max and POCO M2 Pro, ROM for the Redmi Note 9 Pro
Contributors
LeddaZ, erfanoabdi
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Unlocked bootloader
Version Information
Status: Stable
Created 2020-10-08
Last Updated 2021-02-10

Just puts me in a bootloop when i try to install it(never getting past the Redmi spalsh screen)...
Curtana 6/128, previously running the official redmi rom(unlocked bootloader, then re-installed miui)
Should add that when i try to run the pixel experience it does not recognize my sim cards or any wifi, so maybe something more is wrong with my phone.
using TWRP 3.4.0-14 Unofficial by mauronofrio as my recovery, btw... incase that matters.

scott86 said:
Just puts me in a bootloop when i try to install it(never getting past the Redmi spalsh screen)...
Curtana 6/128, previously running the official redmi rom(unlocked bootloader, then re-installed miui)
Should add that when i try to run the pixel experience it does not recognize my sim cards or any wifi, so maybe something more is wrong with my phone.
using TWRP 3.4.0-14 Unofficial by mauronofrio as my recovery, btw... incase that matters.
Click to expand...
Click to collapse
Try to reflash stock rom and format data before installing rom

Hi,
I would really like to try.
One question: do I have to unmount system partition before flashing system?

nirie said:
Hi,
I would really like to try.
One question: do I have to unmount system partition before flashing system?
Click to expand...
Click to collapse
If using twrp or pbrp yes, if using lineage recovery no

So just to be sure: with lineage recovery I just flash and reboot?? That's nice.

nirie said:
So just to be sure: with lineage recovery I just flash and reboot?? That's nice.
Click to expand...
Click to collapse
Yes, just flash, format data if you're encrypted and reboot

Installation worked. But it didn't connect to my wifi. It connected to mobile hotspot, so maybe an issue of my wifi. I tried two times and wiped cache and data. Didn't work. So I installed resurrection remix. Now it works.

nirie said:
Installation worked. But it didn't connect to my wifi. It connected to mobile hotspot, so maybe an issue of my wifi. I tried two times and wiped cache and data. Didn't work. So I installed resurrection remix. Now it works.
Click to expand...
Click to collapse
In my case i installed with pbr and no issues, i always format data and wipe cache, dalvik, system......and all is working fine, i'm not a heavy user and deep sleep is now at 91% two days after installation, i flashed with nikgapps core, i'm on joyeuse, RR is also a good chance, but there is no selinux enforcing...

question to the people who actually tried this rom on a joyeuse:
does everything work? the current miatoll compiled custom rom i use (pixel extended) deactivated the nfc function

Are you just messing around or do you have plans to polish this and go OFFICIAL?

shadow87qft said:
question to the people who actually tried this rom on a joyeuse:
does everything work? the current miatoll compiled custom rom i use (pixel extended) deactivated the nfc function
Click to expand...
Click to collapse
All is working, have tried nfc with android bean and works

@LeddaZ
So far everthing fine... thank you for this wonderful rom.
But i found some little things:
1. Camera Cutout is on Traffic Indicator position, so cant't use it
2. When i Pulldown Quicktiles i get 10(QQ3A200805.001) right behind the edit Stick (AndroidDownloadManager/10, says google if i search for the text), just cosmetic
3. It's not pssible to Remap the Software Button functions (not longpress or double tap) even with Button remapper
4. Kernel is built without Wireguard support, it' so damn easy to add https://forum.xda-developers.com/android/development/wireguard-rom-integration-t3711635
5. How the Hell did you integrate ANX Cam 190 with all functions, tried all ,can't get it working, could'd you explain which modules you used.
Thanks for your hard work

TheFieryBreeze said:
Are you just messing around or do you have plans to polish this and go OFFICIAL?
Click to expand...
Click to collapse
I'm just doing this for fun and to learn, I'm not planning to go official

phil2sat said:
@LeddaZ
So far everthing fine... thank you for this wonderful rom.
But i found some little things:
1. Camera Cutout is on Traffic Indicator position, so cant't use it
2. When i Pulldown Quicktiles i get 10(QQ3A200805.001) right behind the edit Stick (AndroidDownloadManager/10, says google if i search for the text), just cosmetic
3. It's not pssible to Remap the Software Button functions (not longpress or double tap) even with Button remapper
4. Kernel is built without Wireguard support, it' so damn easy to add https://forum.xda-developers.com/android/development/wireguard-rom-integration-t3711635
5. How the Hell did you integrate ANX Cam 190 with all functions, tried all ,can't get it working, could'd you explain which modules you used.
Thanks for your hard work
Click to expand...
Click to collapse
I'll fix the cutout in the next update, but afaik LOS doesn't support traffic indicator on devices with notch/cutout
It's an AOSP/LOS thing, when you enable developer options the build number appears in the quick settings
I think LOS doesn't support button remapping
Thanks for sharing, will add in the next update
After installing ANX you have to manually grant all permissions to the app

LeddaZ said:
After installing ANX you have to manually grant all permissions to the app
Click to expand...
Click to collapse
Installed:
ANXCameraUnity_190.BountifulDistantHapuka.zip
ANXFrameworkUnity_190.BountifulDistantHapuka.zip
ANXCameraHotfix.190.BootloopFix.zip
And granted all permissions
The result is ANX Cam starts but like in every other rom, portrait isn't working and Selfiecam crash.
Actuall i installed:
ANXCameraUnity_185.SaltyIntelligentPlainsqueaker.zip
48MPFixQ_181.GlossyIntelligentCock.zip
And in ANX Camera Pro app i choosed erverything with Portrait except portrait night
So far 185 works with Selfiecam portrait, only not working is rearcam portrait
Did you get other results or did you installed other modules than i?

phil2sat said:
Installed:
ANXCameraUnity_190.BountifulDistantHapuka.zip
ANXFrameworkUnity_190.BountifulDistantHapuka.zip
ANXCameraHotfix.190.BootloopFix.zip
And granted all permissions
The result is ANX Cam starts but like in every other rom, portrait isn't working and Selfiecam crash.
Actuall i installed:
ANXCameraUnity_185.SaltyIntelligentPlainsqueaker.zip
48MPFixQ_181.GlossyIntelligentCock.zip
And in ANX Camera Pro app i choosed erverything with Portrait except portrait night
So far 185 works with Selfiecam portrait, only not working is rearcam portrait
Did you get other results or did you installed other modules than i?
Click to expand...
Click to collapse
I also installed ANXCameraProvider and disabled hand gestures from ANXCamera Pro app and everything works

Seems JOYEUSE is slightly different
ANX Camera 190 working so far except rear portrait:
1. ANXCameraUnity_190.BountifulDistantHapuka.zip
2. ANXFrameworkUnity_190.BountifulDistantHapuka.zip
3. 48MPFixQ_181.GlossyIntelligentCock.zip
4. ANXCameraHotfix.190.BootloopFix.zip
5. JoyeuseCameraFix_V1.0.zip
and AnxCamera Pro app enabled everything with portrait except night portrait did the trick.
thanks

LeddaZ said:
I'm just doing this for fun and to learn, I'm not planning to go official
Click to expand...
Click to collapse
How often are you planning to release new builds?

k-ninja said:
How often are you planning to release new builds?
Click to expand...
Click to collapse
2-3 times a month

[Guide] [monet] Flashing GSI Roms

Hey y'all, after 2 days of headaches with a semi bricked device from a friend i was finally able to get a GSI Rom running.
Here's what you need:
1. Unlocked Bootloader
2. Stock Recovery
https://mega.nz/file/m4Q0iJpR#wP9U5gpXwTVrSWezkaoJqDjgb0zadULTLpb8kLAZJRE
3. GSI Rom (i used Bliss and it works flawless)
https://forum.xda-developers.com/pr...ent/unofficial-blissroms-q-mod-bless-t4138687
4. A PC running Linux
So the problem is that this device comes with a super partition. That means TWRP isnt able to flash a System Image because there is not a system partition instead there is this super partition wich is new to Android 10 and is dynamic. However you need to boot to fastbootd mode to access the system partition inside the super partition.
Important!! You need Stock Recovery for this you can not boot into fastbootd via TWRP at this moment. Also you need Linux because there is only a unsigned Driver for Windows for the fastbootd mode and i dont recommend using unsigned chinese drivers.... i use Manjaro that worked out of the box.
Mi 10 Lite 5G is Treble A/B enabled so we need an A/B Rom Bliss is providing that. Follow these steps to flash the GSI.
1. Reboot to bootloader then enter: fastboot reboot fastboot (there should be the text fastbootd in yellow)
2. fastboot -w (there is maybe an error but this is ok)
2. fastboot erase system
3. fastboot flash system "GSI-ROM-name-without-quotes".img
4. fastboot reboot bootloader
5. fastboot reboot
If it bootloops your GSI is not compatible (Havoc for example) just try it till you're satisfied. This is an first step for Stock Android on our Device. i will build some Custom Roms in the next weeks.
EDIT:
Ok i got Bliss fully up and running Fingerprint and even Google Pay works! There is some things you need to do though.
Preparation:
Stock Recovery
Bliss GSI
Audio Policy Fix.xml: https://mega.nz/file/i4QWkbSD#a3U90V1kk0S01DYxjN3YH-0HsAbo_UUU_rMd7LhYLFc
Procedure:
1. Boot into fastbootd like described above and flash the GSI
2. After boot set Magisk there should be a Magisk link if you open it this Procedure should run automatically
3. In Magisk Download MagiskHide Props Config, Download it and install it reboot.
4. Run in terminal on the device (i used Termux) the command "props" (without quotes) and select option 1 then select from the list Xiaomi and then Device Mi 10 Lite 5G Europe after that go back to main menu and select option 2 select again Mi 10 Lite 5G and nothing else
5. Reboot and check Safety Net it should get a pass if not you did something wrong
6. Download a Root File explorer (i used JRummys Root Explorer)
7. Copy the Audio Policy xml to your phone and replace the file on /vendor/etc to get Headphone Jack and Headset Mics working
8. Go to Settings - phh treble settings - Qualcomm Features and Tick use alternate audio policy
9. Go back to misc Features and tick disable audio effects this gets Notification and Alarm Sounds and Ringtone working.
10. Reboot
11. Check if Bluetooth works it should if not well i honestly dont know for sure
And your Device should run perfectly fine, its crazy fast and i got a 8h Screen on Time. Well thats for me good enough for now im back to cocking Custom Roms

I was struggling with this for a very long time and couldn't flash any GSI!! Thank you so much for this guide, I will try it now and give you a feedback, but where can I find the unsigned chinese drivers for windows? and do you think I can flash android 11 GSI`s like Phh on our device??

Honestly i dont know, it should work just try it. Worse that can happen is a bootloop. I added the Stock Recovery in First Post. And here is a link to the unsingned Xiaomi Driver use at your own risk!
https://c.mi.com/oc/thread-3312019-1-0.html

works perfectly, then I tried to flashing Bliss 14.0.3 and it booted up and worked and now I`m testing ProjectStreak android 11 GSI also boots and almost everything works except for the fingerprint sensor and A LOT of lag in the System UI! think I will revert back to Bliss 12.2 for now!
Thanks again!

I cannot receive SMS with Bliss.
@Legacyleader
I see that you are from Germany. I am also from Germany. Do you have Telegram?

Hi @Benni1123 yes i have telegram, SMS Problem could be solved via APN Settings. In my Case Drillisch had no APN setup after that it was working fine.

Legacyleader2 said:
Hi @Benni1123 yes i have telegram, SMS Problem could be solved via APN Settings. In my Case Drillisch had no APN setup after that it was working fine.
Click to expand...
Click to collapse
Hi Legacyleader you save this device, thanks

i can't seem to get any GSI rom to boot, alway's end up in a bootloop. My Monet Device is unlocked with the latest V12.0.3.0.QJIEUXM Rom.
It enters fastbootd (yellow letters) but when i enter fastboot -w i get error: segmentation fault.
If i flash system after this and reboot, i always end up in a bootloop (device boots to Mi logo and instantly reboots, goes back to mi logo, instantly reboots etc..)
It feels like im missing something obviously? ;-)
@Legacyleader2 do i need to wipe anything after the system flash? if i follow your steps i always end up bootlooping. Tried Andy's Lineage17.1 GSI, Phh AOSP GSI(v222), tried bless, bliss all of them are instant bootlooping. When i flash superpartition over it, system instantly boots stock rom.
Any idea what i'm doing wrong?

@Legacyleader2 look DM please

Hello,
Mi 10 Lite (Monet) owner here! (and new on XDA)
These detailed instructions almost convinced me to make the jump and flash a GSI on my phone purchased recently. It looks like the "standard" procedure for flashing a GSI ROM with fastbootd.
I know I can fallback on the official MIUI ROM in case of problem, but before flashing, I would like to ensure there is at least one GSI which can keep my phone working as a phone, with all basic features working good.
Could you please provide a feedback about your experience?
1) Which GSI did you try?
I am about to try phhusson LineageOS's GSI first, and if it does not work, I'll try Bliss as it looks like it works like a charm
2) How is the battery life affected?
I really enjoy the battery life with MIUI, I don't want it to be cut by two
3) Does the cameras (front, back, pictures/videos modes) still work?
4) Do calls and SMS work?
5) During calls, is the call audio quality good on both sides?
I had issues with some ROM on my previous phones like echos.
6) Does the fingerprint reader work?
Additionally, what about Bluetooth, NFC, speakers, audio output from jack, applications/games performance, ...?
Maybe we could create a post to summarize our successful experiences.
Thank you for your time

does someone successfully installed xposed in GSI bliss room thanks?

Hello everyone one!
I wanted to share my experience after this amazing guide, I managed to follow the guide and flash bliss GSI then I was flashed A LOT of different android 11 GSIs and I was using the AOSP 11 GSI for a week (everything was okay except for the fingerprint & Bluetooth audio).
Then I stumbled upon a MIUI 12 Global build based on android 11 for monet and I'm using it now for the oast week and it's pretty stable.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does the vendor from this build affect flashing GSIs on this phone?
(Excuse my weak english)

Finally I have gone through GSIs.
On my working list.
1. Bless ver 224
2. Crdroid ver 224
3.Losq ver 224
4.Decendant X latest
I have not found any other gsi booting some body may add to the other GSIs booting.
I have not had any luck booting a port gsi.

Crdroid passes safety net out of the box.
For audio bug just tick alternative audio in phh settings and reboot.

Hmmm... I got HavocOS to work.
I used the vbmeta.img, dtbo.img and boot.img off of the latest Arrow rom (Arrow-v11.0-monet-OFFICIAL-20210412-VANILLA.zip), and then flashed the HavocOS GSI image to system, and it... didn't bootloop! It actually booted! Everything seems to work.
I just got it to run, so I'll have to play around a bit before I can give any definite guarantee, but so far everything seems fine. 5G is there as well.
Well, fingerprint doesn't work. Darn.
The two I've gotten to work are:
https://download.havoc-os.com/arm64-ab/Havoc-OS-v4.1-20210208-arm64-ab-Official.img.xz
https://download.havoc-os.com/arm64-ab/Havoc-OS-v4.1-20210208-arm64-ab-Official-GApps.img.xz

Development [ROM][12.1][OFFICIAL][alioth] PixelExperience for Redmi K40/Poco F3/Mi 11X [AOSP][8/25/22]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Redmi K40/Poco F3/Mi 11X (alioth)
What is this?
PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 12.1
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
Face unlock
IR blaster
NFC
Sound/vibration
SafetyNet
Known issues
Lock screen says "Charging slowly" when using Mi Turbo Charge. However, charging speeds are not affected.
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from PixelExperience website
Donate
Liked our work? Donate to the project!
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Get help
Installation instructions
Alioth Telegram chat
Thanks
ZIDAN44 for previously maintaining this device and helping out
chandra1.jd for previously maintaining this device
​
Android OS version: 12.1
Security patch level: August 2022
Build author/Device Maintainer: lzgmc
Kernel Source code: https://github.com/PixelExperience-Devices/kernel_xiaomi_sm8250
Device Source code: https://github.com/PixelExperience-Devices
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09

Reserved

Hello, dear developer
Now i'm in recovery and i tried to use adb sideload, but me device tells me (Errorcode:kInstallDeviceOpenError)
Which fw should i use or how can i fix it.

Thank you for taking over and maintaining this rom.
I love Pixel Experience. I switched over since it was not maintaining anymore but might be coming back as PixelOs doesn't display my notification.

BenChuOriginal said:
Hello, dear developer
Now i'm in recovery and i tried to use adb sideload, but me device tells me (Errorcode:kInstallDeviceOpenError)
Which fw should i use or how can i fix it.
Click to expand...
Click to collapse
are you using the pixel experience recovery image or twrp?

albertordzcz said:
are you using the pixel experience recovery image or twrp?
Click to expand...
Click to collapse
i reflashed MIUI and i redo the steps then finally i get into pixel experience
but finally i found it ddoesn't work well with China carriers, so i'm back to MIUI now
thx

Installed 31/03/22 android 12.1 build on MIUI 12.5.7(IN). So far no issue with installation and basic working. ROM feels smooth.
Geekbench Result: single_core : 832 , Multi-core : 2808.
Issues:
Battery usage is not showing any graph. (3 hrs been using and tried restarting device multiple time.) now battery graph is visible.
- Android version shows Android 12 , buid says alioth 12.1 ( Not sure if its supposed to show 12.1 or not)
So far so good, love this rom

AkshayT said:
Installed 31/03/22 android 12.1 build on MIUI 12.5.7(IN). So far no issue with installation and basic working. ROM feels smooth.
Geekbench Result: single_core : 832 , Multi-core : 2808.
Issues:
Battery usage is not showing any graph. (3 hrs been using and tried restarting device multiple time.)
- Android version shows Android 12 , buid says alioth 12.1 ( Not sure if its supposed to show 12.1 or not)
So far so good, love this rom
Click to expand...
Click to collapse
Ig that's why it shows only android 12 coz the rom was just rebased from 12.1 and the next update will be completely 12.1 ig, not sure.

AkshayT said:
Installed 31/03/22 android 12.1 build on MIUI 12.5.7(IN). So far no issue with installation and basic working. ROM feels smooth.
Geekbench Result: single_core : 832 , Multi-core : 2808.
Issues:
Battery usage is not showing any graph. (3 hrs been using and tried restarting device multiple time.) now battery graph is visible.
- Android version shows Android 12 , buid says alioth 12.1 ( Not sure if its supposed to show 12.1 or not)
So far so good, love this rom
Click to expand...
Click to collapse
I think you have to use it for 1 cycle of charge

I didn't update any custom ROM before via OTA. Is it possible to update? Or i need to reflash the zip and the phone will be reset?

Clean install + fw update to 13.0.3 and all seems working great!
Good job"
Thanks!

arnab das said:
I didn't update any custom ROM before via OTA. Is it possible to update? Or i need to reflash the zip and the phone will be reset?
Click to expand...
Click to collapse
Also, if i change the Recovery, is it going to keep the apps (and data) or format it?

Thank you for maintaining. Great rom!

Can i install coming from EU.rom 22.3.23 weekly?

Is the pixel experience recovery mandatory , or we can use TWRP too? I mean its more convinient for flashing magisk after

Battery drains too quick after updating from Jan 31th version

AkshayT said:
Geekbench Result: single_core : 832 , Multi-core : 2808.
Click to expand...
Click to collapse
a bit on the lower side compared to pixelOS, prolly bcs pixelOS have thermal profile, so it can help to boost cpu when using benchmark profile.. i really hope that dev can put thermal profile as well, bcs both r using arrow based kernel

after updating, my two pcs (win 10 and win11) can't detect my alioth in fastboot. it worked fine before. I need to install magic which only can be installed by fastboot. Anyone can help?

Is it fine to use financial application like gpay phonepe apps on this rom. And does this support work profile. Want to use for daily is it good to go for this rom?

alexiao said:
after updating, my two pcs (win 10 and win11) can't detect my alioth in fastboot. it worked fine before. I need to install magic which only can be installed by fastboot. Anyone can help?
Click to expand...
Click to collapse
Check your PC if it has fastboot drivers installed correctly or not.

[ROM][OFFICIAL] LineageOS 19.1 weeklies for Xiaomi Mi 5

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 12L (S), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
GPL compliance:
​
Device tree source code: LineageOS/android_device_xiaomi_gemini
Kernel source code: LineageOS/android_kernel_xiaomi_msm8996
Working:
Camera (and flashlight)
Fingerprint reader
WiFi
NFC
Bluetooth
Telephony (Calls and Data)
Audio (Record and Playback)
Video Playback
Sensors
GPS
Encryption (FBE)
WiFi Display
Broken:
Nothing (?)
Compatibility:
Compatible with all Xiaomi Mi 5 variants (32GB / 64GB / 128GB). Xiaomi Mi 5S and 5S Plus are not supported.​Builds are based off the Xiaomi's Android 8.0 firmware with proprietary blobs from MIUI V10.2.2.0.OAAMIXM global stable package.​
Device wiki:
Official wiki link
Downloads:
Official download links
Installation:
Follow instructions found in the respective wiki page

First build is already out! Remember, you need to format userdata since we moved from FDE to FBE.

Just had to comment and say, this ROM is absolutely beautiful. The implementation of 19.1 for gemini is just incredible. Little details with the colours, icons, sizing and highlights make it a joy to use! (I suppose some of this might be android 12s 'Material You' but I'm still blown away.
Can already tell the device is running much faster than before (had been on a recent 18.1 build).
This is actually so well polished that I will have to look into getting a new battery. Only reason I'm not using gemini as a primary device. Anybody have a recommendation on where to get a new battery?
Big thanks to bgcngm, absolutely amazing work. It is crazy to think such an old device now can still run the latest lineage!

I had trouble flashing this from twrp even after formatting data partition.
Flashed lineage is recovery and flashed through adb sideloa, everything went smoothly.
Thanks for such a polished build!!
I use this phone with work profile as well.
Will keep posted about it as well

(sorry for my english)
very very thanks!
smooth rom, works flawlessly
same problem here:
when flashing from twrp I got error, but no problems with lineage official recovery
the only little bug I found:
when I turn off the wifi completely, the 'internet button' remains lit

Can't install with twrp... log says error code 1, after format data. that error still showing...
btw i updated twrp version (which is have version support android 12 encryption) and i did again steps and still error code 1 is exist. no luck charm.
And cant install lineage recovery because my pc cant recognize my phone.. guess i have to wait for this 18.1 features... for now.. (sigh)

Heliosaga said:
Can't install with twrp... log says error code 1, after format data. that error still showing...
btw i updated twrp version (which is have version support android 12 encryption) and i did again steps and still error code 1 is exist. no luck charm.
And cant install lineage recovery because my pc cant recognize my phone.. guess i have to wait for this 18.1 features... for now.. (sigh)
Click to expand...
Click to collapse
Hi, I had the same issue. I had also installed the latest twrp (3.7.0_9). What worked for me was using the lineageos recovery instead of twrp. You can find that here:
https://mirrorbits.lineageos.org/recovery/gemini/20221016/lineage-19.1-20221016-recovery-gemini.img
Not sure if there is a proper solution to get twrp to work, this is more of a workaround.

Currently, Lineage Recovery must be used.
Inkypen's TWRP supports FBE, but it is an older version and only supports encryption up to Android 11.

Can we instal gapps from android 11?

kaishi12 said:
Can we instal gapps from android 11?
Click to expand...
Click to collapse
Looks like the Lineageos site has mindthegapps linked for android 12(L)
Google apps | LineageOS Wiki
wiki.lineageos.org

starlord047 said:
Looks like the Lineageos site has mindthegapps linked for android 12(L)
Google apps | LineageOS Wiki
wiki.lineageos.org
Click to expand...
Click to collapse
How to instal zip file using lineage recovery?

kaishi12 said:
How to instal zip file using lineage recovery?
Click to expand...
Click to collapse
I am not sure. I sideloaded it with ADB.

starlord047 said:
I am not sure. I sideloaded it with ADB.
Click to expand...
Click to collapse
Yeah thks try flash twrp back with stuck on screen, sideload work with lrecov

Hi and thanks for keeping alive the mi5. I have only one issue with the contactless pay, always says that the device is rooted. I have install magisk with safetynet and almost all the apk is on zygisk i can make bank transaction with ebanking play store is ok but still can't make contactless payments. Any ideas. Thanks

Gvasilhs68 said:
Hi and thanks for keeping alive the mi5. I have only one issue with the contactless pay, always says that the device is rooted. I have install magisk with safetynet and almost all the apk is on zygisk i can make bank transaction with ebanking play store is ok but still can't make contactless payments. Any ideas. Thanks
Click to expand...
Click to collapse
You can try the magisk hide module
[MODULE] [DEPRECATED] MagiskHide Props Config - SafetyNet, prop edits, and more - v6.1.2
MagiskHide Props Config v6.1.2 Note: This project is dead, and has been for some time. I have not been involved in the Android modding scene for some time and I no longer have the energy to take it up again. If anyone feels like taking over...
forum.xda-developers.com

yevac said:
You can try the magisk hide module
[MODULE] [DEPRECATED] MagiskHide Props Config - SafetyNet, prop edits, and more - v6.1.2
MagiskHide Props Config v6.1.2 Note: This project is dead, and has been for some time. I have not been involved in the Android modding scene for some time and I no longer have the energy to take it up again. If anyone feels like taking over...
forum.xda-developers.com
Click to expand...
Click to collapse
I tried but not working.
Everything is ok with this. https://github.com/kdrag0n/safetynet-fix/files/9356078/safetynet-fix-v2.3.1-MOD.zip

Multiuser also working fine!!

Any idea about this "wakelock" in battery usage?

I am now fully convinced that you and the other Mi 5 maintainers are superhuman, @bgcngm. No way is this possible for regular people.
Famous last words: https://forum.xda-developers.com/t/...os-18-1-for-xiaomi-mi-5.4170027/post-83610929

bgcngm said:
So, just an heads-up. I am going to promote Mi 5 (gemini) to start getting A12 based builds. BIG WARNING: you will need to wipe userdata because we have switched from FDE to FBE. F2FS is no longer supported either.
Click to expand...
Click to collapse
If the device is not encrypted, then wiping userdata doesn't apply, right?