Related
http://androidcommunity.com/galaxy-...-by-korean-screen-protector-company-20120501/
Seems to fit perfectly with what SamMobile is claiming to be the GSIII.
http://www.sammobile.com/2012/05/01/this-is-the-galaxy-siii/
I am so ready for the 3rd!
It seems likely that Samsung is going to launch 2 devices on the 3rd: GSIII with the physical butttons and shaped like GNex (which this screen protector basically confirms), and the i9800 which is the device leaked without physical buttons.
_dan said:
http://androidcommunity.com/galaxy-...-by-korean-screen-protector-company-20120501/
The bottom cutout makes it look like there will be a physical button. :O! Yet it seems to be placed way too far down.
What do you think?
Sorry if this is a double post. Looked around for ten minutes and couldn't find anyone talking about it.
Click to expand...
Click to collapse
Have you been living under a rock for the past few weeks?
Samsung confirmed the presence of a home button a few weeks back, plus the leaked pics of the S3 already confirm the shape and placement of the home button.
tehh4ck3r said:
It seems likely that Samsung is going to launch 2 devices on the 3rd: GSIII with the physical butttons and shaped like GNex (which this screen protector basically confirms), and the i9800 which is the device leaked without physical buttons.
Click to expand...
Click to collapse
The i9300 doesn't appear to be the S3, as confirmed by the low screen resolution here. I would say the original prediction of Galaxy M i9300 is correct, with the S3 being i9500 and the third device being the N8000 Note 10.1. i9800 seems to have disappeared completely from the equation, replaced by N8000.
BJ van Beethoven said:
The i9300 doesn't appear to be the S3, as confirmed by the low screen resolution here. I would say the original prediction of Galaxy M i9300 is correct, with the S3 being i9500 and the third device being the N8000 Note 10.1. i9800 seems to have disappeared completely from the equation, replaced by N8000.
Click to expand...
Click to collapse
Rdf's aren't very reliable. I feel they are just copy and pasted from past models.
Fair call, it would be easy enough to manipulate as well before posting to a blog.
BJ van Beethoven said:
Have you been living under a rock for the past few weeks?
Samsung confirmed the presence of a home button a few weeks back, plus the leaked pics of the S3 already confirm the shape and placement of the home button.
The i9300 doesn't appear to be the S3, as confirmed by the low screen resolution here. I would say the original prediction of Galaxy M i9300 is correct, with the S3 being i9500 and the third device being the N8000 Note 10.1. i9800 seems to have disappeared completely from the equation, replaced by N8000.
Click to expand...
Click to collapse
The two devices announced will probably be the Galaxy M and the Galaxy SIII.
Hmm...
does anyone know, what the notch at the top right of the screen protector
could be for? I mean, what could be at that position?
To me it looked like a hole for a stylus at first
CRaSH3k said:
Hmm...
does anyone know, what the notch at the top right of the screen protector
could be for? I mean, what could be at that position?
To me it looked like a hole for a stylus at first
Click to expand...
Click to collapse
Looks like the cutout for the front facing camera.
dont think thats ths SGS3 , looks more like a SG S Advance
http://www.pdashop.be/product/170988/samsung-galaxy-s-advance.html
webjunky said:
dont think thats ths SGS3 , looks more like a SG S Advance
http://www.pdashop.be/product/170988/samsung-galaxy-s-advance.html
Click to expand...
Click to collapse
That doesn't look anything like the phone SamMobile posted.
Hi....Why would I need a screen protector if the SG has "Cornings Gorilla Glass" ?
Thanks!
DirkStorck said:
Hi....Why would I need a screen protector if the SG has "Cornings Gorilla Glass" ?
Thanks!
Click to expand...
Click to collapse
+1
Also version 2 Gorilla..
Skickat från min GT-I9000 via Tapatalk 2
Please use it , i ll be happy for you. Just buy cheap ones and change it easily . There is no technology that is realy unscrachable...
Sent from my GT-I9100 using XDA
rouvax said:
Please use it , i ll be happy for you. Just buy cheap ones and change it easily . There is no technology that is realy unscrachable...
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
For god's sake...it's gorilla glass 2 though you should get something protective for the glossy back cover because it looks like it would get easily scratched.
Samsung Galaxy S2 - Screen Scratch Test
m8tix said:
For god's sake...it's gorilla glass 2 though you should get something protective for the glossy back cover because it looks like it would get easily scratched.
Samsung Galaxy S2 - Screen Scratch Test
Click to expand...
Click to collapse
no need if you get the wireless charging kit...... its a rubberized back door that has the inductive coil in it some say its ceramic.........hope so.....
Still use SGP Ultra Olephobic screen protector on my SGSII it's worth every cent i paid for it and ill be buying similar when they release protectors for the Galaxy S3.
jonny68 said:
Still use SGP Ultra Olephobic screen protector on my SGSII it's worth every cent i paid for it and ill be buying similar when they release protectors for the Galaxy S3.
Click to expand...
Click to collapse
how much do they run? cos i want one that lasts not like s**t from china
paintball23456 said:
how much do they run? cos i want one that lasts not like s**t from china
Click to expand...
Click to collapse
I think i paid around €13 or thereabouts, still on my phone and has done the job nicely so ill definitely be getting one for the Galaxy S3
100000000% worth getting a screen protector
whilst coins and keys might not scratch the screen, little sand grains do, as I found out on my One X!!!
paintball23456 said:
how much do they run? cos i want one that lasts not like s**t from china
Click to expand...
Click to collapse
you got fake one，very well for my S1
Another decent buy ...
http://www.amazon.com/Nacodex®-Expl...8&qid=1404524551&sr=1-38&keywords=OnePlus+One
Ichisan76 said:
Another decent buy ...
http://www.amazon.com/Nacodex®-Expl...8&qid=1404524551&sr=1-38&keywords=OnePlus+One
Click to expand...
Click to collapse
Your comment for this protector would be appreciated. Does it have round edges?
sm00ther said:
Your comment for this protector would be appreciated. Does it have round edges?
Click to expand...
Click to collapse
What do you mean by round edges?
benthe said:
What do you mean by round edges?
Click to expand...
Click to collapse
Smooth rounded edges around the perimeter like this one http://forum.xda-developers.com/showthread.php?t=2797094
Rounded Borders: The edges are tapered to be chip resistant and more durable. See this one (for Note 3) http://www.spigen.com/brands/samsun...te-3-glas-tr-slim-premium-tempered-glass.html
Round edges will feel smoother to the touch.
sm00ther said:
Smooth rounded edges around the perimeter like this one http://forum.xda-developers.com/showthread.php?t=2797094
Rounded Borders: The edges are tapered to be chip resistant and more durable. See this one (for Note 3) http://www.spigen.com/brands/samsun...te-3-glas-tr-slim-premium-tempered-glass.html
Round edges will feel smoother to the touch.
Click to expand...
Click to collapse
In opposed to what? Sharp square-like corners?
Hey, Frick and Frack!
benthe said:
In opposed to what? Sharp square-like corners?
Click to expand...
Click to collapse
benthe said:
What do you mean by round edges?
Click to expand...
Click to collapse
Holy crap people! It's like the blind leading the blind! Click the link and look at the friggin thing! You're obviously not going to get a straight answer here! NEXT?
ShermCraig said:
Holy crap people! It's like the blind leading the blind! Click the link and look at the friggin thing! You're obviously not going to get a straight answer here! NEXT?
Click to expand...
Click to collapse
I'm sorry, but they look exactly alike from what I can tell (at least as far as you can see on Amazon).
And in all the screen protectors I ever saw - they just go along with the devices' shape, that's why I don't understand the question "does it have round edges?" - if the phone has round edges, so will the screen protectors (again, at least in all the screen protectors for every phone I ever saw).
Also, relax.
benthe said:
I'm sorry, but they look exactly alike from what I can tell (at least as far as you can see on Amazon).
And in all the screen protectors I ever saw - they just go along with the devices' shape, that's why I don't understand the question "does it have round edges?" - if the phone has round edges, so will the screen protectors (again, at least in all the screen protectors for every phone I ever saw).
Also, relax.
Click to expand...
Click to collapse
Everything you said is right - if you had only said it after the first question....
Relaxing....
ShermCraig said:
Everything you said is right - if you had only said it after the first question....
Relaxing....
Click to expand...
Click to collapse
So why the question in the first place? That's what I was leading to? Do some screen protectors don't have round edges?
benthe said:
So why the question in the first place? That's what I was leading to? Do some screen protectors don't have round edges?
Click to expand...
Click to collapse
You'd have to ask the person that asked the question. I agree with you. :good:
ShermCraig said:
You'd have to ask the person that asked the question. I agree with you. :good:
Click to expand...
Click to collapse
That's who I was asking in the first place if you see who I quoted... .
benthe said:
That's who I was asking in the first place if you see who I quoted... .
Click to expand...
Click to collapse
Ya may wanna double check that, my friend. Is there a full-moon now? :silly:
ShermCraig said:
Ya may wanna double check that, my friend. Is there a full-moon now? :silly:
Click to expand...
Click to collapse
To get back to the original topic, did you buy the Nacodex and, if so, how is it in terms of quality and your user experience? I've seen zilch on XDA and the OnePlus One forums about this particular screen protector.
And by the way: This is why the second poster asked whether the protector had rounded edges:
People have received a square-edged SP from Nillkin that was marketed for the OPO but didn't fit.
benthe said:
So why the question in the first place? That's what I was leading to? Do some screen protectors don't have round edges?
Click to expand...
Click to collapse
I think what he's asking is whether the edges/sides are rounded off vs. being a sharp, square cut. It sounds like the misunderstanding is which part of the screen protector we're talking about. I took it as the edges/sides, but it sounds like you're thinking corners?
bts0004 said:
I think what he's asking is whether the edges/sides are rounded off vs. being a sharp, square cut. It sounds like the misunderstanding is which part of the screen protector we're talking about. I took it as the edges/sides, but it sounds like you're thinking corners?
Click to expand...
Click to collapse
See the last line of the post directly above yours (the text of the post linked to originally has been edited).
Reignogleph MMXI said:
See the last line of the post directly above yours (the text of the post linked to originally has been edited).
Click to expand...
Click to collapse
Ah, gotcha. I ordered the Nacodex as well, but haven't yet received it.
Gadgetwhore has a post on 3rd party metal bands. I see the warning from Moto about possible interference with radios, but I'm still very tempted... especially when one is only $12 from Amazon. What do you guys think?
Dan76 said:
Gadgetwhore has a post on 3rd party metal bands. I see the warning from Moto about possible interference with radios, but I'm still very tempted... especially when one is only $12 from Amazon. What do you guys think?
Click to expand...
Click to collapse
Meh. I say just get a band that you like and put it on. Maybe we should get people to post pictures of their M360 with their aftermarket metal band along with a purchase link and any special information so people could get one if they like it? But only bands that are actually confirmed as compatible and being used by the poster. Not to hijack or anything.
Dusty Rhodes said:
Meh. I say just get a band that you like and put it on. Maybe we should get people to post pictures of their M360 with their aftermarket metal band along with a purchase link and any special information so people could get one if they like it? But only bands that are actually confirmed as compatible and being used by the poster. Not to hijack or anything.
Click to expand...
Click to collapse
Already thread in general forum.
Ian B
Stopped by the store and picked up the pebble steel band but didn't like how it tapered down. Had this new band installed at a jewelers yesterday..
AfroCreame said:
Stopped by the store and picked up the pebble steel band but didn't like how it tapered down. Had this new band installed at a jewelers yesterday..
Click to expand...
Click to collapse
That looks sweet! So I take it that band was purchased at the jewelry store, do you mind if I ask how much it was for the band and installation?
blockhead___ said:
That looks sweet! So I take it that band was purchased at the jewelry store, do you mind if I ask how much it was for the band and installation?
Click to expand...
Click to collapse
Yes, it was around $80 installed.
AfroCreame said:
Yes, it was around $80 installed.
Click to expand...
Click to collapse
You're joking, right . Your band looks great, but that's a lot, especially considering the finish of your band. It looks like it will scratch up like crazy.
opasha said:
You're joking, right . Your band looks great, but that's a lot, especially considering the finish of your band. It looks like it will scratch up like crazy.
Click to expand...
Click to collapse
Well actually he paid the exact cost of what Moto will charge people to buy the metal bands separately later this year...
Crazypinoy9 said:
Well actually he paid the exact cost of what Moto will charge people to buy the metal bands separately later this year...
Click to expand...
Click to collapse
Yes, of that I am quite aware. Anyone who buys that ugly band...I deeply pity them - it looks like trash compared to their original (beautiful) render. They didn't even get the right dimensions when they created the connecting point. Have you seen the Engadget pics of it? It sticks out so far from the watch as if it's some cheap attachment. Paying $80 for that garbage?
opasha said:
Yes, of that I am quite aware. Anyone who buys that ugly band...I deeply pity them - it looks like trash compared to their original (beautiful) render. They didn't even get the right dimensions when they created the connecting point. Have you seen the Engadget pics of it? It sticks out so far from the watch as if it's some cheap attachment. Paying $80 for that garbage?
Click to expand...
Click to collapse
The really interesting thing about that photo is it shows the official band doesn't just clip in, it has some sort of plastic adapter. The iFixit review thought that the outer steel casing was grounded to the internals. Motorola claimed metal bands can cause interference. If that's the case, maybe this plastic adapter is to ensure the metal band never touches the metal case, since the case may be the antenna?
AfroCreame said:
Stopped by the store and picked up the pebble steel band but didn't like how it tapered down. Had this new band installed at a jewelers yesterday..
Click to expand...
Click to collapse
Have you experienced any interference with the bluetooth?
ChrisAshton84 said:
The really interesting thing about that photo is it shows the official band doesn't just clip in, it has some sort of plastic adapter. The iFixit review thought that the outer steel casing was grounded to the internals. Motorola claimed metal bands can cause interference. If that's the case, maybe this plastic adapter is to ensure the metal band never touches the metal case, since the case may be the antenna?
Click to expand...
Click to collapse
This could very well be true or just a fabrication so that people only buy their metal band. Just look at all the bands everyone is trying/discussing and successfully using. Moto knew this might happen, but probably didn't expect it to this degree. So I guess, the only story for them to get any sales at all would be to say something like this plastic adapter only comes with and fits our metal band. So if you don't want interference, you can only buy our band, until some company makes a plastic piece themselves and charges 3-5 dollars for it. Then, their argument is completely shot, lol.
If you are interested here are some of the best looking watch strap for Moto360 smartwatch I think
http://www.smartwatchappcenter.com/best-motobest-moto360-watch-strap-replacement-steel-watch-band-for-black-moto360.html
senseijuan said:
If you are interested here are some of the best looking watch strap for Moto360 smartwatch I think
http://www.smartwatchappcenter.com/...ement-steel-watch-band-for-black-moto360.html
Click to expand...
Click to collapse
Although they are all black only.
Sent from my Samsung Galaxy Tab Pro 10.1
opasha said:
Yes, of that I am quite aware. Anyone who buys that ugly band...I deeply pity them - it looks like trash compared to their original (beautiful) render. They didn't even get the right dimensions when they created the connecting point. Have you seen the Engadget pics of it? It sticks out so far from the watch as if it's some cheap attachment. Paying $80 for that garbage?
Click to expand...
Click to collapse
I like that stock metal band, it looks very nice. I think the reason it looks nicer than any aftermarket one is that it's oversized, you can see that the band is wider than the slot it fits into. I'd guess it's at least 24mm and also it doesn't taper.. It's such a huge watch it needs a very wide strap otherwise it looks cheesy.
I can see the attachment point looking odd if you have thin wrists, as the person in your pictures does. Then when it exits out it makes a sharp 90 degree turn down and looks like it doesn't belong, a curved adapter like many watchband have would have solved this. I'll bet it looks good with a thicker wrist though.
Here is a pic of the moto band unattached, I don't think its a plastic adapter at all. It looks like the attachment points are simply tapered down arms.
I got a relic band, it's stainless steel and I have had it on for about a day and no issues with any signal or anything
So the are not offering the band they originally showed with the watch? That was a huge buying decision for me
cds36 said:
So the are not offering the band they originally showed with the watch? That was a huge buying decision for me
Click to expand...
Click to collapse
they are, but at a later date. For early adopters they will offer the band for a special price.
Hey guys,
we in Germany must wait till 10/09 to buy the moto360.
I am searching right now for a metal band. Before I buy one should i know how the surface is. Is it glossy or mat?
I am deciding between these two:
Glossy:
http://www.uhrenarmband-versand.de/Uhrenbandversand-p18413h572s2721-Uhrenarmband-Edelsta.html
Mat:
http://www.uhrenarmband-versand.de/Uhrenbandversand-p18417h572s2721-Uhrenarmband-Edelsta.html
Thanks
Gesendet von meinem Nexus 5 mit Tapatalk
WingnutStrikesBack said:
Hey guys,
we in Germany must wait till 10/09 to buy the moto360.
I am searching right now for a metal band. Before I buy one should i know how the surface is. Is it glossy or mat?
I am deciding between these two:
Glossy:
http://www.uhrenarmband-versand.de/Uhrenbandversand-p18413h572s2721-Uhrenarmband-Edelsta.html
Mat:
http://www.uhrenarmband-versand.de/Uhrenbandversand-p18417h572s2721-Uhrenarmband-Edelsta.html
Thanks
Gesendet von meinem Nexus 5 mit Tapatalk
Click to expand...
Click to collapse
The finish of the Moto360 is pretty reflective/glossy but not too glossy. Here are two completely different watch bands with the black.
1) Pebble Steel Black Metal Band: http://forum.xda-developers.com/showpost.php?p=55450516&postcount=10
2) Glossy Black Metal Band: http://forum.xda-developers.com/showpost.php?p=55338761&postcount=105
Here's the full thread for watch bands: http://forum.xda-developers.com/moto-360/general/thread-to-discuss-22mm-watch-bands-t2868429
Is this how this thing is supposed to fit!!. Or they sent me one for the regular pixel!?..????
Yep. That's the fit...
Sent from my Google Pixel XL using XDA Labs
X10D3 said:
Yep. That's the fit...
Click to expand...
Click to collapse
Wtf.. oh hell no! There is no edge to edge or a little more jesus
It fits the screen exactly.
Sent from my Google Pixel XL using XDA Labs
Supershieldz is nearly identical. I'm still waiting for my iVoler screen protectors to arrive. Maybe they'll be wider.
@egren58 They've got a new version shipping Nov 7th. It is wider 1~1.5mm than the older one. Contact them through Amazon and let them know it's not satisfied and they will offer a refund or the newer wider version. They're correcting it and looks like they've got good customer support.
X10D3 said:
@egren58 They've got a new version shipping Nov 7th. It is wider 1~1.5mm than the older one. Contact them through Amazon and let them know it's not satisfied and they will offer a refund or the newer wider version. They're correcting it and looks like they've got good customer support.
Click to expand...
Click to collapse
I got a perfect install and it still a hairline short.. from sides. This is not very well measure there is still plenty of room before the glass starts to curve on the phone.
I agree
Sent from my Google Pixel XL using XDA Labs
egren58 said:
I got a perfect install and it still a hairline short.. from sides. This is not very well measure there is still plenty of room before the glass starts to curve on the phone.
Click to expand...
Click to collapse
That one looks much better then the one i got from Verizon ...
razor237 said:
That one looks much better then the one i got from Verizon ...
Click to expand...
Click to collapse
Are you serious.. how can anything be worse than this...
This is already unacceptable to me as it stands.
egren58 said:
Are you serious.. how can anything be worse than this...
This is already unacceptable to me as it stands.
Click to expand...
Click to collapse
Yeah from the picture yours didn't look too bad
razor237 said:
Yeah from the picture yours didn't look too bad
Click to expand...
Click to collapse
I would get a refund if I were you.
razor237 said:
Yeah from the picture yours didn't look too bad
Click to expand...
Click to collapse
Yeah...that's unacceptable. For crying out loud, the Pixel screen is not curved that much, if at all. I'm looking at my Pixel XL right now and I don't see any roundness at all. This screen looks flat to me. But all these screen protector companies are saying"because the Pixels screen is curved, we can't make a wider screen protector." I call shenanigans.
Sent from my Pixel XL using XDA-Developers mobile app
lyall29 said:
Yeah...that's unacceptable. For crying out loud, the Pixel screen is not curved that much, if at all. I'm looking at my Pixel XL right now and I don't see any roundness at all. This screen looks flat to me. But all these screen protector companies are saying"because the Pixels screen is curved, we can't make a wider screen protector." I call shenanigans.
Sent from my Pixel XL using XDA-Developers mobile app
Click to expand...
Click to collapse
The screen has a slight beveled at the edge that starts ever so slightly back and for glass screen protectors this is a problem even though it doesn't look like it should be
razor237 said:
The screen has a slight beveled at the edge that starts ever so slightly back and for glass screen protectors this is a problem even though it doesn't look like it should be
Click to expand...
Click to collapse
The company YooTech which is probably the same as Pleason, is sending their version 2 protector to me. They said that it is slightly wider. When I get it, I'll try to remember to post pics.
When I remove the protector that I have applied now, I'm going to lay a straight edge across the screen because I can't see any slight curve. This screen looks to be flat as a pancake. [emoji1]
Sent from my Pixel XL using XDA-Developers mobile app
razor237 said:
The screen has a slight beveled at the edge that starts ever so slightly back and for glass screen protectors this is a problem even though it doesn't look like it should be
Click to expand...
Click to collapse
When you do lay it across long ways at the bottom or top so you get 3 of the edges
There is a slight curvature but it's still a good amount of distance from the edge of the display. You can see the curve when you hold the device in an angle and put it in direct light the reflection will show the angle. But there is still space to go wider.
I have a dial indicator at my work. I'll use it to see exactly how much of a curve we are dealing with. Not that it matters, I just want to see.
Sent from my Pixel XL using XDA-Developers mobile app
lyall29 said:
I have a dial indicator at my work. I'll use it to see exactly how much of a curve we are dealing with. Not that it matters, I just want to see.
Click to expand...
Click to collapse
It's very minimal. The o e plus 3 had more and they managed to get some decent tempered covered the display and a bit more
I've had one of these ordered about 3 weeks ago from Pleson through Amazon. Said they shipped it 10/18, but they 'forgot' to provide a tracking number and can't find one now, but are sure it shipped. They were good about offering a refund, though. Of course, the original picture they were marketing it with - showing it with the Pixel XL - also showed the camera & speaker areas as cutouts, not whole sections cut to the edge, which was one reason I ordered theirs vs all the rest that look essentially identical.
I'm waiting on Intelliarmor's PRO glass - it's the only one that went essentially full edge-to-edge (less about 0.5mm) on my Nexus 6, which had similarly rounded edges.
Curious if the Fold3's pen is exactly the same as the Fold4?
The s pen fold edition, is working on the Fold4
I have buy spen pro ant working with fold4.
BigMosley said:
Curious if the Fold3's pen is exactly the same as the Fold4?
Click to expand...
Click to collapse
Yes, I bought the standing case with S Pen. So far I know it's the same as for the Fold3.
MrBlueEyes88 said:
Yes, I bought the standing case with S Pen. So far I know it's the same as for the Fold3.
Click to expand...
Click to collapse
Happy with your case? I am s-pen addicted....
I can confirm as its in my possession now, yes. Same exact pen, includes extra tips as well. I'm holding back my SPen from the 3 as its not required on the trade-in, so I've got a spare now.