Develop Bugs

[IMAGE][STOCK][TWRP] Stock system image for WI500Q - anthias [WIP]

Code:
/*
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear wars, exploding phones or you getting fired because the alarm app (Which Happens at Low Battery) failed.
* Please if you have any concerns do some research:
* YOU are choosing to make these modifications,
* and if you point the finger at me for messing up your device, I will laugh at you.
*
*/
Here is my simple tutorial to revert back to a stock system image of ZenWatch.
On this link, you can find a .zip file:
it's a backup of my personal asset of the watch, so please cleanse data and cache before booting it up.
To reset your device to stock, you need to download TWRP recovery for ZenWatch and flash it by issuing in a terminal:
Code:
fastboot flash recovery recoveryfile.img
Once you have flashed the recovery (please note that you need to have your bootloader unlocked, refer to this thread), enter it.
Using the TWRP integrated MTP file transfer, extract the .rar file above into the root of the ZenWatch.
Then reboot the recovery into recovery (TWRP needs this step to index backups in memory) and select 'Restore' option.
Then you can find your stock recovery here, to have running the original.
Remember: to flash a recovery, always use
Code:
fastboot flash recovery recoveryfile.img
Happy flashing!
EDIT: You can find the updated version of this guide here.

I didnt find the image, do you have it??
---------- Post added at 04:38 PM ---------- Previous post was at 04:37 PM ----------
EmilioDallaTorre said:
Code:
/*
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear wars, exploding phones or you getting fired because the alarm app (Which Happens at Low Battery) failed.
* Please if you have any concerns do some research:
* YOU are choosing to make these modifications,
* and if you point the finger at me for messing up your device, I will laugh at you.
*
*/
Here is my simple tutorial to revert back to a stock system image of ZenWatch.
In the attachments of this post, you can find a .rar file:
it's a backup of my personal asset of the watch, so please cleanse data and cache before booting it up.
To reset your device to stock, you need to download TWRP recovery for ZenWatch and flash it by issuing in a terminal:
Code:
fastboot flash recovery recoveryfile.img
Once you have flashed the recovery (please note that you need to have your bootloader unlocked, refer to this thread), enter it.
Using the TWRP integrated MTP file transfer, extract the .rar file above into the root of the ZenWatch.
Then reboot the recovery into recovery (TWRP needs this step to index backups in memory) and select 'Restore' option.
Then you can find your stock recovery here, to have running the original.
Remember: to flash a recovery, always use
Code:
fastboot flash recovery recoveryfile.img
Happy flashing!
Click to expand...
Click to collapse
I didnt find the image, do you have it??

Samsung galaxy a6+>>>>>Custom Rom(GSI)<<<<<<<<<

Samsung galaxy a6+>>>>>Custom Rom(GSI)<<<<<<<<<
A6 Plus custom rom.
samsung galaxy a6 + custom rom
------------------------------------------------------------------------------------------------------------------------------------------------------------
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about doing this to your device
YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
This is an Android 9.0 GSI specific for the Samsung A6+(a6pltexx)!
WARNING: The GSI is unstable and some things are not working. Let me know what is not working please!
(so Please don't use this as your daily Drive)
REQUIREMENT:
1.TWRP
2..a6pltexx_GSI.zip-https://drive.google.com/open?id=1g-fL7Kuf4q8VDlJ7uV1WAMzKeraht62j
FLASHING GUIDE:
0.Unzip the folder.
1. Format Dalvik, System, Data and Cache.
2. Install the GSI and click on system image.(system-arm32_binder64-aonly-vanilla-nosu.img)
3. Reboot to recovery.
4.Format Dalvik,Data and Cache.(NOTE-Don't format system again:laugh::laugh
5. then flash Gapps{open_gapps-arm-9.0-full-20190109.zip}--Full(note you wont be able to flash all as there would be error saying there is no space in system partition)
6.So if system partition has no space add the apps name to {gapps-config-phhgsi_a64_a.txt} You don't want to install. list of apps
NOTE-keep{ open_gapps-arm-9.0-full-20190109.zip }and {gapps-config-phhgsi_a64_a.txt}
7 Reboot.
BUGS:
Only sim 1 works
calling dosent work there is no sound while calling or receiving a phone call.
File transfer dosent work.
some times touch screen stops working if phone is note used for 5 min(Temp-solution-restart phone by pressing VOL_UP+VOL_DOWN+POWER Buttons)
AND please report if any more bugs are found..
Thanks..

no other version with bug fix??

this rom no working on A6+ SM-A605FN. only bootloop on A6+ logo.

Sm-a605fn rom
Hey, will you help? because I have uploaded to my a605FN COMBINATION_FAC_FA80_A605FNXXU4ASF1 and I can not do anything else, below the picture, how to upload the previous version? and I had A605FNXXU3BSC6_A605FNOXM3BSC6_XEO
How can you fix it step by step?
https://drive.google.com/drive/folders/1-BQ_nwESrA0lQmZhcUVzUHzmobNHYw3L?usp=sharing
Parthkarmur said:
A6 Plus custom rom.
samsung galaxy a6 + custom rom
------------------------------------------------------------------------------------------------------------------------------------------------------------
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about doing this to your device
YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
This is an Android 9.0 GSI specific for the Samsung A6+(a6pltexx)!
WARNING: The GSI is unstable and some things are not working. Let me know what is not working please!
(so Please don't use this as your daily Drive)
REQUIREMENT:
1.TWRP
2..a6pltexx_GSI.zip-https://drive.google.com/open?id=1g-fL7Kuf4q8VDlJ7uV1WAMzKeraht62j
FLASHING GUIDE:
0.Unzip the folder.
1. Format Dalvik, System, Data and Cache.
2. Install the GSI and click on system image.(system-arm32_binder64-aonly-vanilla-nosu.img)
3. Reboot to recovery.
4.Format Dalvik,Data and Cache.(NOTE-Don't format system again:laugh::laugh
5. then flash Gapps{open_gapps-arm-9.0-full-20190109.zip}--Full(note you wont be able to flash all as there would be error saying there is no space in system partition)
6.So if system partition has no space add the apps name to {gapps-config-phhgsi_a64_a.txt} You don't want to install. list of apps
NOTE-keep{ open_gapps-arm-9.0-full-20190109.zip }and {gapps-config-phhgsi_a64_a.txt}
7 Reboot.
BUGS:
Only sim 1 works
calling dosent work there is no sound while calling or receiving a phone call.
File transfer dosent work.
some times touch screen stops working if phone is note used for 5 min(Temp-solution-restart phone by pressing VOL_UP+VOL_DOWN+POWER Buttons)
AND please report if any more bugs are found..
Thanks..
Click to expand...
Click to collapse

elpcmaniak said:
Hey, will you help? because I have uploaded to my a605FN COMBINATION_FAC_FA80_A605FNXXU4ASF1 and I can not do anything else, below the picture, how to upload the previous version? and I had A605FNXXU3BSC6_A605FNOXM3BSC6_XEO
How can you fix it step by step?
https://drive.google.com/drive/folders/1-BQ_nwESrA0lQmZhcUVzUHzmobNHYw3L?usp=sharing
Click to expand...
Click to collapse
You cant go back to u3 bootloader once it is updated to u4.....
Its just same as the knox thing you cant do anything here
U3 bootloader was version of bootloader which ised to come with oreo and pie upto april security patch.
And the may security patch upgrades your bootloader
Hence you cant downgrade beyond may security patchh..

Parthkarmur said:
You cant go back to u3 bootloader once it is updated to u4.....
Its just same as the knox thing you cant do anything here
U3 bootloader was version of bootloader which ised to come with oreo and pie upto april security patch.
And the may security patch upgrades your bootloader
Hence you cant downgrade beyond may security patchh..
Click to expand...
Click to collapse
is it to wait and samsung will release the firmware under binary 4?

Booting into TWRP shows blank screen only

Hi all!
I wanted to root my phone with twrp but sadly it only shows a blank screen after I issue the fastboot boot command. Bootloader is already unlocked.
Android: 10
BuildNr: QKQ1.190910.002 V11.0.19.0.QDIMIXM
I hope you can help me here kinda lost
Thanks!

Are you booting a file like twrp-3.3.1-dees_troy-daisy.img? I always stuck with 3.3.1 by dees troy because it worked. I think the offain one was popular with custom rom users.
You don't need TWRP for root though...
[GUIDE] Install Magisk with proper support for OTA updates
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. * Please do some research if you have any concerns about features included in the products you find here before...
forum.xda-developers.com

[RECOVERY][3.5.2_10][gtelwifiue][gtesqltespr] TWRP Recovery

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Installation
Download version .tar when you haven't a TWRP installed and you are coming from stock ROM and flash it via Odin in download mode. NOTE: Un-check Auto-reboot option in Odin, install tar file (it has to be placed in AP section) and after reboot manually in recovery mode with vol+, home and power buttons. This because otherwise you'll come back to stock recovery.
Download version .img when you have a TWRP installed. Simply, from home, go in install -> install image -> select your .img file -> press recovery as partition where you want to install it -> swipe to flash -> reboot system.
Download version .zip if you have an old TWRP. (you can install a .img or .zip file, as you want)
Bugs/Issues
Encryption with password isn’t supported, so don’t set the secure boot or put a password at the boot of the device
Download
gtelwifiue (SM-T560NU): https://www.androidfilehost.com/?w=files&flid=328969
gtesqltespr (SM-T377P): https://www.androidfilehost.com/?w=files&flid=328968
Source code
gtelwifiue: https://github.com/TWRPSG-8916/android_device_samsung_gtelwifiue
gtesqltespr: https://github.com/TWRPSG-8916/android_device_samsung_gtesqltespr
Kernel: https://github.com/LOSSG-8916/android_kernel_samsung_msm8916

DJABHipHop said:
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Installation
Download version .tar when you haven't a TWRP installed and you are coming from stock ROM and flash it via Odin in download mode. NOTE: Un-check Auto-reboot option in Odin, install tar file (it has to be placed in AP section) and after reboot manually in recovery mode with vol+, home and power buttons. This because otherwise you'll come back to stock recovery.
Download version .img when you have a TWRP installed. Simply, from home, go in install -> install image -> select your .img file -> press recovery as partition where you want to install it -> swipe to flash -> reboot system.
Download version .zip if you have an old TWRP. (you can install a .img or .zip file, as you want)
Bugs/Issues
Encryption with password isn’t supported, so don’t set the secure boot or put a password at the boot of the device
Download
gtelwifiue (SM-T560NU): https://www.androidfilehost.com/?w=files&flid=328969
gtesqltespr (SM-T377P): https://www.androidfilehost.com/?w=files&flid=328968
Source code
gtelwifiue: https://github.com/TWRPSG-8916/android_device_samsung_gtelwifiue
gtesqltespr: https://github.com/TWRPSG-8916/android_device_samsung_gtesqltespr
Kernel: https://github.com/LOSSG-8916/android_kernel_samsung_msm8916
Click to expand...
Click to collapse
thank you for all your great and dedicated hard work

blaze2051 said:
thank you for all your great and dedicated hard work
Click to expand...
Click to collapse
NP

New TWRP 10 update for Samsung Galaxy Tab E 9.6 & Samsung Galaxy Tab E 8.0 MSM8916 Model
Change Log:
- Backup Now Works.
- Plus All Partitions can now be backup.

Hi there!!
I'm having some troubles installing TWRP on a gtelwifiue (Samsung SM-T561). Could the 3.5.2_10 version work also on this device?
I apparently uploaded with success TWRP through heimdall, but when I restart the device with (volumeUp+home+power) the recovery doesn't show up; instead, I get the logo splashpage with a small red exclamation mark on the top left :-|

fillotassi said:
Hi there!!
I'm having some troubles installing TWRP on a gtelwifiue (Samsung SM-T561). Could the 3.5.2_10 version work also on this device?
I apparently uploaded with success TWRP through heimdall, but when I restart the device with (volumeUp+home+power) the recovery doesn't show up; instead, I get the logo splashpage with a small red exclamation mark on the top left :-|
Click to expand...
Click to collapse
Nope, This version of TWRP is for SM-T560NU & the SM-T337P.

Question Help: Magisk ERROR 1 TWRP

I own a Poco F3 to date I have always managed to install CUSTOM ROM without problems.
This morning I wanted to install the stock ROM with my flash tool to start from a "clean" situation. The problem I encounter is the following.
- I FASTBOOT boot TWRP v6.3_A12-alioth-skkk;
- ADB SIDELOAD CUSTOM ROM (Specifically SparkOS latest May release)
- REBOOT INTO RECOVERY (I specify that it restarts the same one with which I booted - keep this thing in mind)
-adb sideload magisk 26.1, this operation ends with ERROR 1 in red
-DATE FORMAT
Now at the end of this process the custom ROM starts, and magisk is not installed.
The first thought now to install magisk is to reflash the latter, but ANY recovery that I try to load from this moment on does not start, the phone shuts down directly.
Where am I wrong and how can I fix it?

Hi you could try my previous post:
I prefer to use my "Temporary Recovery" program and TWRP to install any Custom Rom, Magisk v26.1 ect and a OTG Adaptor.
[A13]Evolution X for POCO F3/Mi 11x[alioth][OFFICIAL]
Evolution X 7.0 for the POCO F3 [alioth] /* * Your warranty is void. Or vaild, probably? * * I am not responsible for bricked devices, dead SD cards, Ebolation X, * thermonuclear war, or the current economic crisis caused by you following *...
forum.xda-developers.com
I hope it helps.

Unfortunately I don't have an OTG, any other solution?
Consider that I start from a flash, therefore a phone with stock rom, I repeat "clean", so in doing so we are going to avoid some problems due to the multiple CUSTOM ROM installations.
Where is it that I'm wrong?

Don't ask me why, don't ask me how but I solved it!!!
TWRP boot twrp-3.7.0_12-0-alioth.img
And I installed the file: Magisk-v25.2.apk
Content in the zip of the post you mentioned earlier.
The magisk flash was successful without errors and of course I booted a TWRP which as I said before was the only one that could boot