I own a Poco F3 to date I have always managed to install CUSTOM ROM without problems.
This morning I wanted to install the stock ROM with my flash tool to start from a "clean" situation. The problem I encounter is the following.
- I FASTBOOT boot TWRP v6.3_A12-alioth-skkk;
- ADB SIDELOAD CUSTOM ROM (Specifically SparkOS latest May release)
- REBOOT INTO RECOVERY (I specify that it restarts the same one with which I booted - keep this thing in mind)
-adb sideload magisk 26.1, this operation ends with ERROR 1 in red
-DATE FORMAT
Now at the end of this process the custom ROM starts, and magisk is not installed.
The first thought now to install magisk is to reflash the latter, but ANY recovery that I try to load from this moment on does not start, the phone shuts down directly.
Where am I wrong and how can I fix it?
Hi you could try my previous post:
I prefer to use my "Temporary Recovery" program and TWRP to install any Custom Rom, Magisk v26.1 ect and a OTG Adaptor.
[A13]Evolution X for POCO F3/Mi 11x[alioth][OFFICIAL]
Evolution X 7.0 for the POCO F3 [alioth] /* * Your warranty is void. Or vaild, probably? * * I am not responsible for bricked devices, dead SD cards, Ebolation X, * thermonuclear war, or the current economic crisis caused by you following *...
forum.xda-developers.com
I hope it helps.
Unfortunately I don't have an OTG, any other solution?
Consider that I start from a flash, therefore a phone with stock rom, I repeat "clean", so in doing so we are going to avoid some problems due to the multiple CUSTOM ROM installations.
Where is it that I'm wrong?
Don't ask me why, don't ask me how but I solved it!!!
TWRP boot twrp-3.7.0_12-0-alioth.img
And I installed the file: Magisk-v25.2.apk
Content in the zip of the post you mentioned earlier.
The magisk flash was successful without errors and of course I booted a TWRP which as I said before was the only one that could boot
Related
Hey guys, finally you can get root access on your vivo y51l. However this method is only tested on CyanogenMod 12.1, and will be tested on other roms too within few days.
WARNING
* I'm not responsible for bricked devices, dead SD cards,
* or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about Rooting your device.
* Before flashing it! YOU are choosing to make these modifications.
1- CyanogenMod 12.1
*Whats working:-
-booting
-touchscreen
-Internet
-Camera
-LED flash light
-Bluetooth
*Whats not working:-
Everything except above things.
2- MiUi 9
*Whats working:-
Booting
Touchscreen
Wifi
Bluetooth
Camera
LED flash light
Internet
*Whats not working:-
Everything except above things.
NOTE 1- Backup your current data, system, boot.img and any important data before doing anything.
NOTE 2- After flashing this file you will not be able to use custom recovery. If you want to use any custom recovery, you have to reflash your backed up boot.img using fastboot.
*How to flash:-
1- Download the img file from below link.
2- Rename downloaded file to boot.img
3- Boot into fastboot mode.
4- Flash boot.img by typing "fastboot flash boot boot.img"
5- Reboot to system.
*How to flash on MiUi 9:-
https://youtu.be/dshjCSErtzE
DOWNLOAD'S
1- for CyanogenMod 12.1
https://mega.nz/#F!lKJDEZTa!1_kCvDk63djtx3rSksQzbQ
2- For MiUi 9
https://forum.xda-developers.com/android/development/root-root-vivo-y51l-t3744877
If brick
I am new in this so please tell me If my vivo y51l is bricked then what i have ti do.
Hey, can you tell the modifications you did in the boot.img? I want to root vivo y55L, but it can't be rooted because of the kernel, I think. Any help would be appreciated. Thanks btw.
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
I own nothing in these. roms, kernels, gsis. All credits down below.
--------------------------------------
Supported devices:
J730*/J530*/G610*/J710*/J701*
Instructions
Make sure you have latest TWRP or OrangeFox (i recommend OrangeFox)
Download and flash ProjectSpagetX (first flash Create Vendor 2.0, reboot recovery and flash ProjectSpagetX)
Download OneOSMi8Lite-Aonly-10-20201203-nippongsi.img (downloaded file is "gz" you need to extract img file) flash as "system" image.
Download and flash Cronos Kernel 5.0 (cronos kernel more stable in MIUI than other kernels) "i tested it a lot weeks"
Now you can reboot system... but you cant login google services because this is MIUI Global Rom
--------------------------------------
TO FIX CANT LOGIN GOOGLE SERVICES;
Now you opening play store and you clicking Sign in... But nothing happens.. Now
Now first download the Google Play Services
And Gmail. Install two of them.
And reboot now open Gmail and login your account easily!
--------------------------------------
How to Root?;
Flash Magisk canary and reboot system (now system will gets infinite boot)
Make hard reboot (volume down + power)
And enter recovery, Flash magisk canary again, reboot and system seccussfully boots.
--------------------------------------
Bugs;
You cant control brightness
Phone stucks when you use Stock MIUI Camera's mods (use footej for no stuck)
if you found a bug reply down below to let other people know.
Whats working;
You can login Mi account
Rom is smooth
Sim card working
OneOS Settings working
Themes working have good themes by OneOS
Phone not crash (if you using another kernel system will crash's sometimes)
I passed CTS Profile on magisk
--------------------------------------
CREDITS
Project Spaget - Cronos Kernel by @ananjaser1211
MIUI 12 OneOS GSI by nippongsi
My main language is not English sorry for wrong words.
Auto reboot and why have a pattern key..sorry for my bad english
https://sourceforge.net/projects/amber-gsi/files/Nusantara-11/Nusantara_v2.5-11-arm64-ab-Vanilla.img.xz/download
stuck on boot anim at samsung galaxy j7 pro
ilyas UG said:
https://sourceforge.net/projects/amber-gsi/files/Nusantara-11/Nusantara_v2.5-11-arm64-ab-Vanilla.img.xz/download
Click to expand...
Click to collapse
me stuck boot logo
ilyas UG said:
https://sourceforge.net/projects/amber-gsi/files/Nusantara-11/Nusantara_v2.5-11-arm64-ab-Vanilla.img.xz/download
Click to expand...
Click to collapse
A/B GSI's cant work with Project Spaget.
can I use screen lock?
Saitoh Michio said:
can I use screen lock?
Click to expand...
Click to collapse
No, Miui forces to fingerprint lock.
cant flash nippongsi, file too big for the system
leecherleechleech said:
cant flash nippongsi, file too big for the system
Click to expand...
Click to collapse
repartitioner
Türkçe olarak da anlatabilir misin?
hello can i get rom for samsung galaxy J7 Device j7y17lte.
Xander11 said:
hello can i get rom for samsung galaxy J7 Device j7y17lte.
Click to expand...
Click to collapse
Yes
ichbinahmet said:
Yes
Click to expand...
Click to collapse
can i get links pls
Xander11 said:
can i get links pls
Click to expand...
Click to collapse
Links on Instructions panel
ichbinahmet said:
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
I own nothing in these. roms, kernels, gsis. All credits down below.
--------------------------------------
Supported devices:
J730*/J530*/G610*/J710*/J701*
Instructions
Make sure you have latest TWRP or OrangeFox (i recommend OrangeFox)
Download and flash ProjectSpagetX (first flash Create Vendor 2.0, reboot recovery and flash ProjectSpagetX)
Download OneOSMi8Lite-Aonly-10-20201203-nippongsi.img (downloaded file is "gz" you need to extract img file) flash as "system" image.
Download and flash Cronos Kernel 5.0 (cronos kernel more stable in MIUI than other kernels) "i tested it a lot weeks"
Now you can reboot system... but you cant login google services because this is MIUI Global Rom
--------------------------------------
TO FIX CANT LOGIN GOOGLE SERVICES;
Now you opening play store and you clicking Sign in... But nothing happens.. Now
Now first download the Google Play Services
And Gmail. Install two of them.
And reboot now open Gmail and login your account easily!
--------------------------------------
How to Root?;
Flash Magisk canary and reboot system (now system will gets infinite boot)
Make hard reboot (volume down + power)
And enter recovery, Flash magisk canary again, reboot and system seccussfully boots.
--------------------------------------
Bugs;
You cant control brightness
Phone stucks when you use Stock MIUI Camera's mods (use footej for no stuck)
if you found a bug reply down below to let other people know.
Whats working;
You can login Mi account
Rom is smooth
Sim card working
OneOS Settings working
Themes working have good themes by OneOS
Phone not crash (if you using another kernel system will crash's sometimes)
I passed CTS Profile on magisk
--------------------------------------
CREDITS
Project Spaget - Cronos Kernel by @ananjaser1211
MIUI 12 OneOS GSI by nippongsi
Click to expand...
Click to collapse
I've tried according to the steps above but the result is also a bootloop.
already created vendor, install projectspaget_v3, install OneOSMi8lite-Aonly-.IMG > Install System Image, Install CronosKernel_V5 the result is the same but my bootloop is using j730g/ds.
There is another solution so I can use the rom, what if you do a full backup via twrp OneOSMiLite8-Aonly so we can just restore via twrp.
Melisata said:
I've tried according to the steps above but the result is also a bootloop.
already created vendor, install projectspaget_v3, install OneOSMi8lite-Aonly-.IMG > Install System Image, Install CronosKernel_V5 the result is the same but my bootloop is using j730g/ds.
There is another solution so I can use the rom, what if you do a full backup via twrp OneOSMiLite8-Aonly so we can just restore via twrp.
Click to expand...
Click to collapse
no spaget v3, you should use spaget X
sim not working fo me!
Led light work in j7 prime?
OrangeFox Recovery
Code:
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*
INSTALLATION:
1. Back up your important data
2. Boot image with "fastboot boot path/to/image"
3. The device will automatically reboot into OrangeFox recovery after installation (allow this to happen)
4. Install flashable zip
5. Enjoy!
Credits
* TeamWin - for TWRP Recovery
* The OrangeFox Team - for your hard work
* To all testers for their time and patience
* @TheRealDarkness for build OrangeFox
* @ThE_MarD for TWRP sources
FEATURES:
* Updated with latest TWRP commits
* Built-in support for installing init.d functionality
* Built-in support for installing Magisk
* AromaFM
* Password, torch, led
* Superb new UI and themes
* OrangeFox theme engine:
- choice of theme (black, dark, etc)
- choice of color scheme
- choice of splash screen
* And many more!
Screenshots: https://telegra.ph/OrangeFox-Recovery-Project--Moto-g30caprip-12-22
Source Code: https://gitlab.com/OrangeFox
Download recovery: https://sourceforge.net/projects/caprip/files/OFOX/
REPORTING BUGS!
* You tell me
* You have to wait 10-20 seconds for the touch to work, (recovery was tested on caprip with ilitek and Novatek touchscreen)
could you enable data decryption for android 12, or it impossible?
even once I disabled screen lock entirely, I can't "decrypt /data" for some reason, which severely limits the entire point of custom recoveries
(running via fastboot boot, not permanent install, but shouldn't make a difference)
otherwise it looks pretty cool!
jan6 said:
could you enable data decryption for android 12, or it impossible?
even once I disabled screen lock entirely, I can't "decrypt /data" for some reason, which severely limits the entire point of custom recoveries
(running via fastboot boot, not permanent install, but shouldn't make a difference)
otherwise it looks pretty cool!
Click to expand...
Click to collapse
did you boot recovery?
I can make a guide on how to decrypt data on this device, it's really easy to do it, in the Moto G³⁰ group in BR we have two methods to do it.
Although since the recovery is based on TWRP 3.7.0-12-0 it should decrypt itself )))
why else would I write here if I didn't boot into this orangefox, lol
I did
Code:
adb reboot bootloader
fastboot boot OrangeFox-R11.1_0-Unofficial-caprip.img
it's the same as with twrp, more or less, /data is locked, and mounting of /data is required for like half the functionality, and nandroid backups are most of the point of a custom recovery
from what I've heard twrp SHOULD be able to decrypt android 11 and 12, idk why it doesn't work for me with neither twrp nor orangefox (which even has a nicer pin entry box for decryption), even if I remove screen lock entirely, it can't do it... (I'm running android 12)
jan6 said:
why else would I write here if I didn't boot into this orangefox, lol
I did
Code:
adb reboot bootloader
fastboot boot OrangeFox-R11.1_0-Unofficial-caprip.img
it's the same as with twrp, more or less, /data is locked, and mounting of /data is required for like half the functionality, and nandroid backups are most of the point of a custom recovery
from what I've heard twrp SHOULD be able to decrypt android 11 and 12, idk why it doesn't work for me with neither twrp nor orangefox (which even has a nicer pin entry box for decryption), even if I remove screen lock entirely, it can't do it... (I'm running android 12)
Click to expand...
Click to collapse
With the attached file you can easily decrypt, just follow these steps:
1° Format data
2° Flash zip attached
3° Format data and reboot
After that the storage should be free of encryption.
Or you can use another method, if you use my rom you will know that all the partitions are in read-write, being able to modify anything, including the vendor. Another exp would be:
With the other attachment "fstab.zip"
You can do the download, then unzip "fstab.zip", it will leave a file called "fstab.qcom", with it you go to the vendor and mount it as RW, then follow the path "/vendor/etc" and copy fstab.qcom, then you do a reboot and the storage would be decrypted.
hi all. i am using eu 13.0.6.0 fastboot rom on my poco f3. Though i am getting 'find devices storage corrupted' every time i restart. so, i learned i could flash the persist.img from twrp. but how to get that persist.img ? thanks in advance
I don't know about twrp method. But you can use "Payload Dumper" to extract payload.bin file of ROM to access all images. Then flash it by ADB.
arifn82 said:
hi all. i am using eu 13.0.6.0 fastboot rom on my poco f3. Though i am getting 'find devices storage corrupted' every time i restart. so, i learned i could flash the persist.img from twrp. but how to get that persist.img ? thanks in advance
Click to expand...
Click to collapse
Hi,
You could check my post on page 1 of the Evo-X thread, Dated 11-09-2022, regarding using temporary flash and my second post on page 16, link to a different thread to fix "'find devices storage corrupted'"
[A13]Evolution X for POCO F3/Mi 11x[alioth][OFFICIAL]
Evolution X 7.0 for the POCO F3 [alioth] /* * Your warranty is void. Or vaild, probably? * * I am not responsible for bricked devices, dead SD cards, Ebolation X, * thermonuclear war, or the current economic crisis caused by you following *...
forum.xda-developers.com
I always start from a clean install of Xiaomi.eu V12 rom, using a Fastboot version and my PC using "Press a few buttons and wait for my F3 to restart" to fix issues with my custom roms playing up, once the install is completed i install a new rom over the top, again using temporary Recovery via fastboot, i prefer OrangeFox recovery,
I hope you sort it.
rashazad said:
I don't know about twrp method. But you can use "Payload Dumper" to extract payload.bin file of ROM to access all images. Then flash it by ADB.
Click to expand...
Click to collapse
problem is, the 13.0.6.0 fastboot EU rom doesnt seems to be a payload.bin type..all *img's are inside of a folder named 'images' and there is no persist image
I'm deeply sorry for misleading.
Fastboot files are simply extracted with winrar, as you said. Those payload.bin files I mentioned are Recovery files.
I believe you better to download the ROM from reliable source like here. Extract persist image and fastboot flash.
I recently install TWRP skkk on my poco f3 wich which A13 and can't do the installation permanently because when I install the .zip in TWRP I have this mesage: Invalid zip file format!
I intall this TWRP: https://drive.google.com/file/d/1Zy5gtphj9jOYlO72VYlWWJ8Tm4Twprcq/view?usp=sharing
Aday5059 said:
I recently install TWRP skkk on my poco f3 wich which A13 and can't do the installation permanently because when I install the .zip in TWRP I have this mesage: Invalid zip file format!
I intall this TWRP: https://drive.google.com/file/d/1Zy5gtphj9jOYlO72VYlWWJ8Tm4Twprcq/view?usp=sharing
Click to expand...
Click to collapse
follow guide by the rom dev
ask questions in the rom's support group
Aday5059 said:
I recently install TWRP skkk on my poco f3 wich which A13 and can't do the installation permanently because when I install the .zip in TWRP I have this mesage: Invalid zip file format!
I intall this TWRP: https://drive.google.com/file/d/1Zy5gtphj9jOYlO72VYlWWJ8Tm4Twprcq/view?usp=sharing
Click to expand...
Click to collapse
Hi,
You could try my post on the Evo-X thread,
[A13]Evolution X for POCO F3/Mi 11x[alioth][OFFICIAL]
Evolution X 7.0 for the POCO F3 [alioth] /* * Your warranty is void. Or vaild, probably? * * I am not responsible for bricked devices, dead SD cards, Ebolation X, * thermonuclear war, or the current economic crisis caused by you following *...
forum.xda-developers.com
Install temporary Recovery using option 6,
once in TWRP, select Advanced option,
from the scroll down menu select "Flash Current TWRP",
I hope this helps
To install permanent Skkk you must unzip the .zip and copy the .img file to the phone's internal storage, when you start the temporary recovery go to advanced and install twrp ramdisk.
Choose the .img file you copied to storage and flash it.
If I write weird it's because I use the translator.