Hello, I bought a display for my oneplus 7t, unfortunately the display is without a frame that is between the display and the phone housing if and where I can buy this frame connecting the display with the phone housing thank you for your help
Related
Help,my defy spotted dead pixel. Digitizer still functioning. Where can I buy front glass with digitizer and LCD panel together? Don't want to seperate apart digitizer and LCD .prefer easier fixing
Sent from my MB525 using XDA
Anyone has suggestion on defy front glass casing with digitizer and lcd attached? It easier to fix then seperate digitizer and lcd screen
Have you looked around on Amazon?
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias=mobile&field-keywords=defy+screen
Try cnn.cn
Hi,
I had to replace the screen on my defy once. It was a major chore. I ended up scratching the frame while prying off the screen (its stuck on with some pretty strong glue). I also had to use my own glue - I used water proof clear silicon. When I got it together, my Defy looked beat up. The silicon was too thick and I ended up cracking the frame near the screws.
I recently ordered the housing, screen from: www.cnn.cn . And while it was expensive, it came with a sticky outline that I used to easily replace the screen. I was able to discard the frame of my first defy with the nicks. The end results is that my defy looks like new, even though the back and side might have some nicks and cuts.
I think the store ships from HK. It took a while for it to arrive, but it usually does arrive. I'd recommend it.
-------
EDIT: I just reread and you probably will just need to replace the LCD and not the Digitizer. The Digitizer is glued on to the frame but the LCD underneath is free and pushed by the mainboard to the digitizer. You do not need to replace the digitizer in order to correct the LCD issues. In anycase, the choice is yours. CNN.cn does not sell the LCD however.
Ptikjp said:
Hi,
I had to replace the screen on my defy once. It was a major chore. I ended up scratching the frame while prying off the screen (its stuck on with some pretty strong glue). I also had to use my own glue - I used water proof clear silicon. When I got it together, my Defy looked beat up. The silicon was too thick and I ended up cracking the frame near the screws.
I recently ordered the housing, screen from: www.cnn.cn . And while it was expensive, it came with a sticky outline that I used to easily replace the screen. I was able to discard the frame of my first defy with the nicks. The end results is that my defy looks like new, even though the back and side might have some nicks and cuts.
I think the store ships from HK. It took a while for it to arrive, but it usually does arrive. I'd recommend it.
-------
EDIT: I just reread and you probably will just need to replace the LCD and not the Digitizer. The Digitizer is glued on to the frame but the LCD underneath is free and pushed by the mainboard to the digitizer. You do not need to replace the digitizer in order to correct the LCD issues. In anycase, the choice is yours. CNN.cn does not sell the LCD however.
Click to expand...
Click to collapse
Wow thanks buddy!! The digitizer is working 100%, usable. The only problem is black dead pixel even reboot to recovery mode, the black dot still can be seen in blue wordings in recovering mode. Since the changing the LCD doesn't require changing the digitizer, That save lots of money.
Heard LCD sceen has to be OEM cos compatibe may not boot up?
defybest said:
Wow thanks buddy!! The digitizer is working 100%, usable. The only problem is black dead pixel even reboot to recovery mode, the black dot still can be seen in blue wordings in recovering mode. Since the changing the LCD doesn't require changing the digitizer, That save lots of money.
Heard LCD sceen has to be OEM cos compatibe may not boot up?
Click to expand...
Click to collapse
I would always go with oem. The lcd is buy far way more expensive than the digitizer unfortunately. Good luck.
I cracked the top glass on the Tianhe i9377. Do you know of a replasment screen that will fit the phone?
TianHe I9377 LCD panel quality is poor
darkfur93 said:
I cracked the top glass on the Tianhe i9377. Do you know of a replasment screen that will fit the phone?
Click to expand...
Click to collapse
I recently got this TianHe I9377 4.53 inch MT6577 dual core 4G ROM 512M RAM phone from Shenzhen. Actually the seller mis-advertse this model as 4.7 inch.
When I use it on the 1st few days , everything works fine.
However, after 5 days, in one morning. I notice there is liquid spill out onto the LCD panel's internal screen when I remove the plastic screen protector.
There is a very small hole on the LCD glass panel. When I remove the platic screen protector, the STATIC charge just pull out the LCD licquid because there is a small hole on the glass.
This model's LCD panel quality is very bad .
In addition, even the spec. mentions the rear camera is 8MP. When I look at the details of those photos from my PC (23 inch monitor).
The resolution is < 2MP. Poor Camera as well.
Even the price is cheap , this model is not recommended.
-ricky321-
Hi all,
I've changed the display of my z1 compact. Change was not really complicated, but after two days I see that display glue is detaching. Particularly from the bottom right angle display is partially lifted.
I would like to buy another adhesive form for the display, detach and attach it again, but I have a question. Is there a way to add more glue in the middle of display maybe? when I detached the original one, my perception was that glue wasn't only on the boxer, but also in the middle. Is this feasible? or is possible to find a stronger glue than the one included in my replacement display?
Thanks
Stefano
Hello,
I need to replace (again) my Z1c screen and it will be the 2d time I do this in a few months.
For your info, I'm not a phone repairman, but a crafed old person who used to work in high precision watches.
Looking for a screen replacement on the internet, I saw that sometimes screen replacements are prosposed "WITHOUT FRAME".
So, my question is : when should one replace a screen "with a frame" ?
Cheers to all
Buy a Screen with frame only if the front frame is damaged. Otherwise, buy the screen alone with proper adhesive.
Removing the front frame from middle frame is a difficult task and you will loose watterproof feature. Also you must remove the back cover to replace the front frame beacause there are some screws that attach the back frame with the front frame
Hello Jonfensu,
Thank you very much for your clear answer. I appreciate !
One more question though : Except if the front frame is obviously damaged, how do you know it is eventually damaged (no evident sign) ?
Cheers to you !
Hello all,
I have a cracked screen and need a new digitizer. I checked on ebay and I do not know if these options are worth. Specifically, are the digitizer options online similar to the resolution and quality of the authentic one?
Does anyone have to offer a guidance on which replacement digitizer should I buy?
Thank you in advance
LCD Display Touch Screen Digitizer Assembly for LG Google Nexus 5X H791 H790 with Frame (Black) https://www.amazon.com/dp/B01DM1U7JM/ref=cm_sw_r_cp_apap_NhdhCOodsd6Ex
I just replaced my screen and this works flawless