I cracked the top glass on the Tianhe i9377. Do you know of a replasment screen that will fit the phone?
TianHe I9377 LCD panel quality is poor
darkfur93 said:
I cracked the top glass on the Tianhe i9377. Do you know of a replasment screen that will fit the phone?
Click to expand...
Click to collapse
I recently got this TianHe I9377 4.53 inch MT6577 dual core 4G ROM 512M RAM phone from Shenzhen. Actually the seller mis-advertse this model as 4.7 inch.
When I use it on the 1st few days , everything works fine.
However, after 5 days, in one morning. I notice there is liquid spill out onto the LCD panel's internal screen when I remove the plastic screen protector.
There is a very small hole on the LCD glass panel. When I remove the platic screen protector, the STATIC charge just pull out the LCD licquid because there is a small hole on the glass.
This model's LCD panel quality is very bad .
In addition, even the spec. mentions the rear camera is 8MP. When I look at the details of those photos from my PC (23 inch monitor).
The resolution is < 2MP. Poor Camera as well.
Even the price is cheap , this model is not recommended.
-ricky321-
Related
I got a cracked screen evo but the touchscreem which perfect but the outside screen is cracked and I hate the way it looks on my evo
What is the difference between PCS Digitizers and LCD Screen????
baboulou said:
I got a cracked screen evo but the touchscreem which perfect but the outside screen is cracked and I hate the way it looks on my evo
What is the difference between PCS Digitizers and LCD Screen????
Click to expand...
Click to collapse
The digitizer is the part that picks up the touch of the screen for input. The LCD is the actual viewable screen. Is it just the glass that is broken? Is so you can probably just replace the glass unless I'm mistaken. Unless the glass and the LCD are one piece.
--In 1938 I killed a Hobo--
The hobo murderer is right. You most likely have the digitizer cracked, since that's the topmost layer of the phone. If you're lucky and the actual LCD screen under the glass is fine then you can save a pretty decent amount of money by only replacing the digitizer.
Edit: This teardown by ifixit is a great demonstration of how this phone is put together. It should give you a better idea of which parts are broken: http://www.ifixit.com/Teardown/HTC-Evo-4G-Teardown/2979/1
Hello,
I recently dropped my phone resulting in a cracked screen. I had replaced the screen myself. The phone still functions just fine with one minor problem. The glass screen isn't 100% touching the digitizer (at least from what I can tell). There is a gap between the digitizer and the replacement glass. I recall that when I was removing the cracked glass, there was a layer of adhesive I had removed because the glass shards were pretty stuck all over it. So does anyone know how to resolve this problem or where to buy that adhesive so there will be a perfect fit?
I've attached some images. One is at rest and you can probably see the dark circle in the middle of the screen.
The second is when I put some pressure on the screen, the *bubble* gets bigger. Any ideas?
Thanks,
Out of luck....
Unfortunately, you are out of luck. Your only option is to purchase the LCD/Digitizer/Glass preassembled. (Around $250)
The design used by Samsung, I believe weakens the glass on the Galaxy S3. Take for example the iPhone 5 which also utilizes Gorilla Glass 2, it is more durable than the S3.
I would think that people would band together and call for a class action law suite against Samsung to replace all screens free of charge for the first incident, or you can sell the phone and buy a quality phone.:highfive:
Buy a new phone.... note2 :thumbup:
twanskys204 said:
Buy a new phone.... note2 :thumbup:
Click to expand...
Click to collapse
The Note2 is more durable than the S3, but the glass is still more prone to breaking than the iPhone 5. Again, Samsung is not a quality manufaure, they are a company trying to push out products in quantity, not quality. Quite a shame! Again, to the OP....choose a quality phone which is designed in America
Lol this is funny cause I have droped my note 2 from nipple height all the time....just breaks open and I put the battery in then cover and bam it works
My P9 EVA-L19 Glass LCD Broken
Hi
Unfortunately, my P9 EVA-L19 fall down and its glass LCD broken .
I purchased a replacement and I hope it works as original one.
http://www.witrigs.com/oem-lcd-with-digitizer-for-huawei-p9-gold
Good to know...
Cool story.
I have received the LCD replacement and I also installed it by my self.
So far so good
but I compare the new LCD with my friend P9 and I found there is slight difference in color.
but it is good for me.
Good congratulations
I bought an replacement lcd assy from germany.. after cursing with the replacement (mostly with the battery) i powered up the phone and noticed that swiping home screens worked only 1 time in 10..
Checked with the debug tools that touch location works perfectly.. but touch point size shows always zero, and the actual touch point size is displayed in the pressure
Can anything be done with the means of software, or is this gonna be a bad ebay review?
Sigh. What is wrong with these people. TEST BEFORE INSTALL. So you can send it back to warranty without issues and not leave a bad eBay review for a defective screen.
..
yes you have to TEST BEFORE INSTALL
I recommend this replacent so far
I had my screen broken last night, how's the A+++ screen replacements quality compared to factory one (JDI)?, in terms of responsiveness, quality, deep blacks, brightness. color calibration, etc, I'm very upset and worried about this and the fact that I may end up with something not on par in terms of quality...
Bleak3993 said:
I had my screen broken last night, how's the A+++ screen replacements quality compared to factory one (JDI)?, in terms of responsiveness, quality, deep blacks, brightness. color calibration, etc, I'm very upset and worried about this and the fact that I may end up with something not on par in terms of quality...
Click to expand...
Click to collapse
I recommend the lcd screen I purchased see my post:good:
OEM LCD with Digitizer for Huawei P9 Gold
SKU: 112326
Be the first to review this product
Availability: In stock
US$25.00
Price Drop Alert
https://www.witrigs.com/oem-lcd-with-digitizer-for-huawei-p9-gold#customer-reviews
akeshma said:
OEM LCD with Digitizer for Huawei P9 Gold
SKU: 112326
Be the first to review this product
Availability: In stock
US$25.00
Price Drop Alert
https://www.witrigs.com/oem-lcd-with-digitizer-for-huawei-p9-gold#customer-reviews
Click to expand...
Click to collapse
I bought the LCD the OEM here, work and looks great. Don't know how to tell if it's OEM but everything seems as good as original. I also compared with other P9 and couldn't tell that mine was replaced.
I also bought a OEM battery to fix the suddenly shutting down problem at less than 50% charge, mainly when using camera. Seems fixed.
Buran79 said:
I bought the LCD the OEM here, work and looks great. Don't know how to tell if it's OEM but everything seems as good as original. I also compared with other P9 and couldn't tell that mine was replaced.
I also bought a OEM battery to fix the suddenly shutting down problem at less than 50% charge, mainly when using camera. Seems fixed.
Click to expand...
Click to collapse
from where you bought the battery ?
akeshma said:
from where you bought the battery ?
Click to expand...
Click to collapse
Battery
https://www.aliexpress.com/item/Ori...i-Ascend-P9-Lite-G9-VNS-DL00/32815982023.html
Hopefully one of you can help me
I currently have two huawei p9, wife's and sister in-laws, my wife is on her second screen already and needs to be replaced again.
The screens I found, cheap ones on eBay (lltrader I think) they don't look too bad at all.
First screen I replaced on my wife's was awful and the glue melted and the glass seperate and cracked within a week.
The second was from the seller I mentioned above, but she is a clumbsy woman.
So for this third one I am looking for for a glass screen protector, the problem is the replacement screens don't have the curved edges. So all the screen protectors for the position are too small or are designed to fit the curved edges...
Do any of you know a phone with very similar dimensions that I could try a screen protector from. I am sick of replacing screens now...
I just screw up my mi a1 screen, if you can kindly recommend good options for screen replacement please
https://www.honorbuy.com/1249-touch-screen-and-lcd-for-xiaomi-mi-5x-mi-a1.html
I bought this to replace mine and it's indistinguishable from the original. Just not gorilla glass. But none of the aftermarket ones have it anyway. Button lights work and10 touch.
He even ships it with a free glass protector for you to install.
For Xiaomi Mi A1 LCD Display with Frame Screen 10 Touch Panel For Xiaomi MiA1 LCD Display Digitizer Touchscreen Repair Parts
https://s.click.aliexpress.com/e/cPfH6hJa
they have only original parts ( they are SAT of Xiaomi)
http://www.dragon-tt.com/Products.aspx?sid=247
mamouhalos said:
I bought this to replace mine and it's indistinguishable from the original. Just not gorilla glass. But none of the aftermarket ones have it anyway. Button lights work and10 touch.
He even ships it with a free glass protector for you to install.
For Xiaomi Mi A1 LCD Display with Frame Screen 10 Touch Panel For Xiaomi MiA1 LCD Display Digitizer Touchscreen Repair Parts
https://s.click.aliexpress.com/e/cPfH6hJa
Click to expand...
Click to collapse
No Gorilla Glass on this one, probably it will crack after a while (lot of comments about that). You need to buy some screen protection asap.
Better to buy an original one that comes with Gorilla glass.
Yes I agree. I mentioned it if you wanted something cheap. It doesn't have gorilla glass and there might be some light bleed from physical buttons.
If you want the REAL original parts I would go with
https://www.dragon-tt.com/xx.aspx?id=1445
I have bought many spare parts in general including the mi a1 screen with housing replacement. All official.
mamouhalos said:
I bought this to replace mine and it's indistinguishable from the original. Just not gorilla glass. But none of the aftermarket ones have it anyway. Button lights work and10 touch.
He even ships it with a free glass protector for you to install.
For Xiaomi Mi A1 LCD Display with Frame Screen 10 Touch Panel For Xiaomi MiA1 LCD Display Digitizer Touchscreen Repair Parts
https://s.click.aliexpress.com/e/cPfH6hJa
Click to expand...
Click to collapse
I have just recived it. The one with the frame. Any video on how to do it without a heater?
Mrsevic said:
I have just recived it. The one with the frame. Any video on how to do it without a heater?
Click to expand...
Click to collapse
You don't need a heatgun if you purchased the screen with frame.
The problem is that I cannot find any guide that does it with the tool provided. I would be grateful if I could ask you in private message for some doubts that I have.
Thanks
I bought a copy a few months ago from AliExpress. Mounted last week. One drop from very low distance to the floor and it cracked. Very disappointed.
valkyrjur said:
I bought a copy a few months ago from AliExpress. Mounted last week. One drop from very low distance to the floor and it cracked. Very disappointed.
Click to expand...
Click to collapse
Agree, only dragon-tt gave me satisfaction, I tried eBay and aliexpress I've been really disappointed by the quality of the assembly (screen+frame)
Yes, one thing that I noticed straight away when I removed the original screen to put the new one is that aliexpress' copy was thinner and looked very fragile. I used b-7000 glue and it fitted perfectly with not light leaks. But in the end not so strong...one small drop and it cracked. With the original I had multiple drops for almost two years from more height with no cracks.
Hello and sorry for my bad english recently i trade my Redmi Note 7 4/64 for a pixel 2 xl with cracked glass near to front facing camera. Well i went to my local service and asked if there is chance to replace only glass he told me NO, to replace the glass only need oca machine and etc. Also we saw the front camera lens at microscope and it has scratches which effect the quality....well i have found some tempered glasses that they cover the whole front camera (because mine has no glass at front camera its empty ) and buy a new camera but i dont know if they quality is the same as the original (maybe i will buy it from aliexprress for about 10 euros) also will it take dust if i put the temptered glass? it will be like it has glass will effect the quality? sorry again any other suggest is allowed
I recently traded and got a Google Pixel 2 XL. The phone's screen is severely damaged and the front camera has broken glass all in it. There is a Crack @ the bottom of the screen too. I am afraid that it is just getting worse. The device functions just fine, every tap or swipe on the screen can be the last. I am looking for a good cheap device repair shop that can make this device like new. Ifixit is the official repair for the device.
cooltranier13px said:
I recently traded and got a Google Pixel 2 XL. The phone's screen is severely damaged and the front camera has broken glass all in it. There is a Crack @ the bottom of the screen too. I am afraid that it is just getting worse. The device functions just fine, every tap or swipe on the screen can be the last. I am looking for a good cheap device repair shop that can make this device like new. Ifixit is the official repair for the device.
Click to expand...
Click to collapse
just bought from ali new camera and temptered glass which cover the entire screen my camera lens will be protected i guess !!!