Related
I have searched high and low for an answer on how to replace a scratched screen of the SGS2 by yourself and have finally found the answer.
This will definitely VOID YOUR WARRANTY so don't say you haven't been warned.
I suggest you only use this guide if you were desperate like me. My phone didn't come with an official warranty so I was as good as screwed if I wanted a new screen.
Step 1: Obtain the part
Just ebay for lcd screen and digitizer galaxy s2 (however u may wish to buy it with the faceplate see below note). You want both the super amoled plus screen and the digitizer together. You can get this for about 120-130 USD.
There are some vendors that sell just the 'lens' but you need a specialized machine to replace it and is simply not worth the trouble.
Note that if you go to an original Samsung service centre, when they order the part, it comes together with the face plate and is therefore a breeze to install. This part is for sale on Ebay too. http://cgi.ebay.com/LCD-Touch-Digit...312?pt=LH_DefaultDomain_0&hash=item3a682b9ad0. I would recommend you to buy this type instead of just the LCD and digitizer.
Follow this disassembly guide (not mine).
Now using a thin metal flat tool with a wide flat surface area, dig at the small gap from the top of the screen and pry the screen from the frontplate. It is held entirely by double-tape so don't worry about any screws, catches. Be careful of not damaging the bezel in the process.
Clean off the old black tape and double tape as best as u can, and be careful of the bottom buttons. The attachment shows how it looks like after cleaning it.
Reapply the double tape in strips and try to shape it to fit as much as you can. This is tiresome but necessary since the adhesive behind the lcd screen is very weak and you don't your screen falling out of you halfway.
Push it in and it should stick. That's it! Then reassemble.
Confirmed working!
thanks for the write up, do you have any more photos of your process?
OMG, it's like watching an autopsy.
Could a better resolution screen or even 3d screen be used/upgraded later on?
Nice to know for something happens, Hope not
Hope wont be necessary. How did you scratch the screen so hard that it had to be changed? I tought the Gorilla Glass is almost unscratchable.
Man,,u shud handle it a bit gently ,,,,i mean,i flinched every time u "threw" the phone on the table.
On second thought, I might as well buy that screen protector
Sent from my GT-I9100 using XDA Premium App
wow that is the definition of T H I N !!!!!
Samsung Galaxy S II 2 i9100 LCD Touch Digitizer Screen
Thanks also full part with bezel here http://www.ebay.co.uk/itm/Samsung-G...062?pt=LH_DefaultDomain_3&hash=item3cb9ff0e4e
Samsung Galaxy S II 2 i9100 LCD Touch Digitizer Screen
With Housing Bezel front cover ,Home Button, Flex Cable
http://www.ebay.co.uk/itm/LCD-Touch...669?pt=LH_DefaultDomain_3&hash=item3cb9ff0cc5
Samsung Galaxy S II 2 i9100 LCD Touch Digitizer Screen
With Housing Bezel front cover ,Home Button, Flex Cable Without Samsung logo
White house soon on site
psp888 said:
thanks for the write up, do you have any more photos of your process?
Click to expand...
Click to collapse
Unfortunately not at this time. I will do it the next time around (which will be soon as there is a slight imperfection with my button sensitivity so I might be inclined to try it again) but trust me it's not a beautiful process. Needs lots of guts. Nothing technical about it. Shove the flat tool in the gap and keep on loosening the glue as much as u can then take it off.
podgo said:
Hope wont be necessary. How did you scratch the screen so hard that it had to be changed? I tought the Gorilla Glass is almost unscratchable.
Click to expand...
Click to collapse
It's more like cracked. I dropped it on some rocks from waist height and it cracked. It seems that gorilla glass is not shatter proof. There are also some scratches/mini cracks from where the rocks cut it.
Lesson learnt, get a screen protector that hopefully will reinforce it a bit more.
I wonder how these replacement parts compare to the quality of the original parts.
Is your new screen a Super AMOLED+ screen? all ebay listing just says LCD. Is it original Samsung part?
psp888 said:
Is your new screen a Super AMOLED+ screen? all ebay listing just says LCD. Is it original Samsung part?
Click to expand...
Click to collapse
There some listed as Super AMOLED+ screen just search on ebay or even drop the sellers a question about their iteams.
It is a Super Amoled + screen (don't see any difference in quality between the old and new one). Most sellers don't really know much of their products unfortunately but they do say it's original and I do believe mine is.
There's no Samsung print on the front plate but it does have a part number which corresponds closely to the original one. Everything else looks exactly the same, even the black sponge at the back and the microchips have Samsung wording on them.
BarryH_GEG said:
OMG, it's like watching an autopsy.
Click to expand...
Click to collapse
I have stomach to watch dead bodies, but not a GSII LOL
Dropped SGS2 from bikemount : broken screen.
OK,
I broke my screen this weekend. I was on a bike tour with the SGS2 mounted on the steering bar. For some unclear reason, the universal holder came off the bikemount at 25 kmh... Dropped on the paved road, and although still in the universal holder, which is made of soft rubber (which I would expect to break the fall), the screen of my beloved SGS2 was cracked !!! Apart from the cracked screen, everything else seems to work as before.
So, today I ordered a replacement set with bezel from aliexpress.com at 148USD.
When I get the part, I will try to post some pictures of the replacement process.
I had an HD2 before ... just sold it last Friday :-( ... I think over a period of 1,5 year, I dropped the HD2 about 6 times on hard surfaces ... also it fell off my bike once ... the HD2 never broke.
So, is it just bad luck this time, or is the built quality of the SGS2 just not as good as the HD2 ?
Regards,
DirkB
DirkB19 said:
OK,
I broke my screen this weekend. I was on a bike tour with the SGS2 mounted on the steering bar. For some unclear reason, the universal holder came off the bikemount at 25 kmh... Dropped on the paved road, and although still in the universal holder, which is made of soft rubber (which I would expect to break the fall), the screen of my beloved SGS2 was cracked !!! Apart from the cracked screen, everything else seems to work as before.
So, today I ordered a replacement set with bezel from aliexpress.com at 148USD.
When I get the part, I will try to post some pictures of the replacement process.
I had an HD2 before ... just sold it last Friday :-( ... I think over a period of 1,5 year, I dropped the HD2 about 6 times on hard surfaces ... also it fell off my bike once ... the HD2 never broke.
So, is it just bad luck this time, or is the built quality of the SGS2 just not as good as the HD2 ?
Regards,
DirkB
Click to expand...
Click to collapse
It is very easy to do. Just unclip each component and transplant it to the new case.
I have to do my friends one this weekend as he has dropped it and damaged the screen and the bezel .
I have managed to source the screen and the bezel for him all as one piece .
Now all the guides i have seen just rip the phone to pieces , surely if we have the right bits like i have bought this fix is very smple to do??
I am thinking it is just a case of undoing the 7 screws at the back of the phone , opening it up and then disconnect the screen cables from the mainboard . Does the whole front then come away??
If not i take it i have to undo the screws on the main board to release the screen? but this means the componets of the main board may come loose etc??
Has anyone that has done this got any info on just swapping the screen with the complete part? when i say complete part i mean the one that comes with the bezel and home button etc like this
http://cgi.ebay.com/LCD-Touch-Digit...312?pt=LH_DefaultDomain_0&hash=item3a682b9ad0
Thanks in adance for any guidance
buxz777 said:
Has anyone that has done this got any info on just swapping the screen with the complete part? when i say complete part i mean the one that comes with the bezel and home button etc like this
http://cgi.ebay.com/LCD-Touch-Digit...312?pt=LH_DefaultDomain_0&hash=item3a682b9ad0
Thanks in adance for any guidance
Click to expand...
Click to collapse
+1 for me.
I received my screen including bezel.
I've removed the main board just like the guy in the Youtube video.
But now I still have to transfer (from original front to my new front):
- the bottom PCB (where the microUSB sits)
- the camera
- the speaker
etc ...
I can not find a description/movie of how to do this ?
The bottom PCB for example has 2 screws, but after removing them the PCB itself looks like glued to the front assy'.
I prefer to see or get proper instructions before starting the rest of this adventure
...
PS : I got my part from aliexpress.com within 2 weeks (via airmail). It's with the Samsung logo on it and the package included all required tools (screwdrivers) to do the job. Would be nice to see some written instructions included as well.
Grtz,
DirkB
Since I got my new Note 2 LTE last week, I've got very thin scratches on my screen, which is only visible under direct sunlight - I ordered for a screen protector way before I ordered my phone but my phone came very early in the post. Since these scratches are peeing me off, is they any way I can get the glass replaced? One that's scratch free and genuine?
All help would be greatly appreciated!
PS - Is it possible these scratches occurred through the manufacturing process?
Thank you!
Regards,
Dave
The stylus could have done it?
Yeah, possibly! I mean the scratches are extremely thin. I knew I shouldn't have used that damn stylus 'till I got a screen protector! I think that particles that are able to scratch we're carried by the stylus and left a nasty scratch
After seeing the various scratch tests on youtube,with keys and knives and whatnot(with hardly any scratches),its hard to imagine that stylus couldve done that.
Sand,maybe.
Get it replaced for another reason, and buy a screen protector for that one?
Well, not sure. I think this Gorilla Glass we get on the Note 2 is bu**s***. I've got all these tiny scratches on my phone, after a week; my phone has always been on a table or in my pants pockets with nothing else in the same pocket, I don't get how the hell it got scratched, just noticed it today and was pissed at work lol.
http://www.youtube.com/watch?v=nFdJOBOI3lY
Watch this . Makes you feel pity for that phone.
fml. it didn't even look like it scratched it! wtf?
Dirt/sand will easily scratch your screen
A screen protecter costs like $1
Why would you not use one
Sent from my GT-N7105 using xda premium
I dont know what you guys are doing. I use my pen, I walk on the beach daily and have the phone in my pocket. I take it out on the production floor at work and dont have any scratchs on my display. Even after 9 months of doing the same with my Note1, I dont have any scratches.
If you're really paranoid, you could research the cost it would cost to get your screen replaced, say $100.
Sell it for $50 cheaper than RRP. Then buy a new one. Profit I guess.
Beamed from Jupiter on my Galaxy Note II
This should be what you're after.
http://item.mobileweb.ebay.co.uk/viewitem?itemId=320984730131
I don't think it's the stylus or your handling as I have been using my note 2 for a few weeks now without a screen protector and I didn't notice any scratches. I don't know the real cause for your scratches but i have to tell you that in the note 2 user guide, there is a statement saying to don't put any screen protector. But it's purely your choice if you want to use it.
Sent from the undoubtedly best phone on earth, the Samsung Note II
Not to use any screen protectors? Why?
Handwritten from my Note 2
Laynee1 said:
Not to use any screen protectors? Why?
Handwritten from my Note 2
Click to expand...
Click to collapse
Because there is NO need to use any. If sand or dust gonna scratch it then a tiny protector, however pricey it is, won't save it either.
And really, these scratches come as per our usage pattern. I never could able to scratch my Note 1, which I used for 9 months and my S2, which was used for 6+ months. And no, I don't use my device carefully.
But the service center, where I submitted the Note 2 last week, was able to scratch the screen. I told them I'd give them an award.
is the lens glass (outer glass) replacable on the note2 ??on the s3 its quite a hard job to do and i ruined mine while trying.
is it not a combined unit outer glass and touch screen?
magyosha said:
is the lens glass (outer glass) replacable on the note2 ??on the s3 its quite a hard job to do and i ruined mine while trying.
is it not a combined unit outer glass and touch screen?
Click to expand...
Click to collapse
Proof. No bugger reads threads anymore.
FloatingFatMan said:
Proof. No bugger reads threads anymore.
Click to expand...
Click to collapse
thanks for your reply..
i cannot see either in this thread or others a definitive statement if the screen is the same glued to the digitizer type that the s3 has.
i can see the a outer screen can be purchased .. yes .
i am interested if it is the same or not as the s3 as when i heated my s3 up to fix the outer screen on that it buggered it up. and would breath a slight sigh of relief if the note2 outer screen was easier to replace,
forgive my inability to find the part you say i should of read
magyosha said:
thanks for your reply..
i cannot see either in this thread or others a definitive statement if the screen is the same glued to the digitizer type that the s3 has.
i can see the a outer screen can be purchased .. yes .
i am interested if it is the same or not as the s3 as when i heated my s3 up to fix the outer screen on that it buggered it up. and would breath a slight sigh of relief if the note2 outer screen was easier to replace,
forgive my inability to find the part you say i should of read
Click to expand...
Click to collapse
as I've read and watched on youtube before, I understood that most of the latest LCD/AMOLED/etc (screen) and digitizer(touch panel) of mobile units are glued tightly if not "built" together, hence "further" reducing or providing slimmer waistline for the actual unit,. i believe it can be taken apart but will be a "very" difficult task to do without leaving a mark or worst damaging the LCD/AMOLED screen,. just sharing my thought based on what I've learned on youtube and reviews which mostly is about tearing down new mobile devices,.
gedster314 said:
I dont know what you guys are doing. I use my pen, I walk on the beach daily and have the phone in my pocket. I take it out on the production floor at work and dont have any scratchs on my display. Even after 9 months of doing the same with my Note1, I dont have any scratches.
Click to expand...
Click to collapse
I do the same but still has scratches on my 3 weeks old note II
Skickat från min GT-N7100 via Tapatalk 2
Hello All,
Just recently dropped my screen for AT&T Samsung Galaxy Note 2. The phone still works but has cracks everyone. I was wondering if anyone has attempted to change just the screen itself, if so, where did you buy the screen from and what tools did you use? Also, what is the metal frame around the phone called and is it possible to get it replaced? Thank you and have a nice day!
wangasore said:
Hello All,
Just recently dropped my screen for AT&T Samsung Galaxy Note 2. The phone still works but has cracks everyone. I was wondering if anyone has attempted to change just the screen itself, if so, where did you buy the screen from and what tools did you use? Also, what is the metal frame around the phone called and is it possible to get it replaced? Thank you and have a nice day!
Click to expand...
Click to collapse
If you are talking about the glass then I just replaced mine about a week ago. I actually ordered a replacement in white instead of the grey that I have. I used a hair dryer, hobby knife kit (only to start the edges), and the tools that came with the glass. It cost about $30 and an hour of your time. The only problem I had was getting the glass to stick with the old tape. A good reference are the videos for replacing the Galaxy S3 glass.
Do not push to hard when putting the new screen in place, you will break the digitizer if you do. I did find that if you have a completely broken screen and its showing black, the s-pen seems to still work fine and can make the phone function. I am assuming that the 11pin port will also push video to a tv with the screen broken and the phone can be used that way also if needed (will test and let you know).
Nate8315 said:
If you are talking about the glass then I just replaced mine about a week ago. I actually ordered a replacement in white instead of the grey that I have. I used a hair dryer, hobby knife kit (only to start the edges), and the tools that came with the glass. It cost about $30 and an hour of your time. The only problem I had was getting the glass to stick with the old tape. A good reference are the videos for replacing the Galaxy S3 glass.
Do not push to hard when putting the new screen in place, you will break the digitizer if you do. I did find that if you have a completely broken screen and its showing black, the s-pen seems to still work fine and can make the phone function. I am assuming that the 11pin port will also push video to a tv with the screen broken and the phone can be used that way also if needed (will test and let you know).
Click to expand...
Click to collapse
How hard was it to do a replacement on the screen glass itself? and is it easy to do a bezel replacement?
Nate8315 said:
If you are talking about the glass then I just replaced mine about a week ago. I actually ordered a replacement in white instead of the grey that I have. I used a hair dryer, hobby knife kit (only to start the edges), and the tools that came with the glass. It cost about $30 and an hour of your time. The only problem I had was getting the glass to stick with the old tape. A good reference are the videos for replacing the Galaxy S3 glass.
Do not push to hard when putting the new screen in place, you will break the digitizer if you do. I did find that if you have a completely broken screen and its showing black, the s-pen seems to still work fine and can make the phone function. I am assuming that the 11pin port will also push video to a tv with the screen broken and the phone can be used that way also if needed (will test and let you know).
Click to expand...
Click to collapse
You replaced the glass for the Note 2? Yes I am just talking about the glass itself. Do you have a link to where you bought the item and any link to videos you used to assist you in replacing the glass? Thank you so much for all your help!
wangasore said:
You replaced the glass for the Note 2? Yes I am just talking about the glass itself. Do you have a link to where you bought the item and any link to videos you used to assist you in replacing the glass? Thank you so much for all your help!
Click to expand...
Click to collapse
I purchased the glass off of ebay, I cant post a link due to not having enough post here, but just search "galaxy note 2 replacement glass"
I looked at a bunch of Galaxy S3 glass replacement videos. just search "s3 glass replacement" on youtube.
It is time consuming, I used a hair dryer to be safe because heat guns get too hot if not careful.
I did get a chance to test if the 11pin still pushed video to a tv with a broken screen (using an MHL adapter). It did not for me. I plugged a phone in with a broken digitizer that the s pen still worked on and would let me make calls from. The phone is still function able, just no picture on the screen (working in the dark with the s-pen). Nothing showed up on the tv screen. I plugged another note 2 in to verify and the other note 2 pushed video just fine.
What's the easiest way to tell if I just need to replace the glass versus the entire digitizer?
Glass replacement
Ok for every thread on the internet the digitizer is NOT part of the glass. The glass is just that......glass. Stop calling it a digitizer these are not iPhones!!!!!! The digitizer is laid on top of the amoled and has a connector that runs under the display and plugs in there with a flip type switch connector. The glass can be removed with heat approx. 160 deg with a heat gun on low and keeping track of the temp with a infrared thermo. I've done this a few times now be careful with white as these tend to break easier than the grey not sure why laminate must be weaker. Takes 45mins to do. You can buy the glass for approx. $25 shipped be careful near the bottom with the button flex they are glued on. You must reuse your speaker trim and button trim also. I have only 1 single question can you buy a replacement digitizer by itself without having to buy the amoled? Anyone know and how much they are please point me to one for the i317m.
Why the are you answering a 3 month old thread?
Op says he dropped his screen...lol
Sent from my SAMSUNG-SGH-I317 using xda premium
Better late than never. ...imho...lol
Hi, as you may guessed, broke my screen, quite badly though 95% touch interface still works and have kept it like this for about 2 months.
Now my patience is gone with the major crack lines and some yellow spots. Plus I have to always rotate to interact sometimes due to the 5% dead area of touch panel.lol
I've looked at replacements (as its been said, replace lcd+digitiser) but my question rests on the quality of the parts.
I've read through the forums and seen some ebays links. Are these genuine screen? Are they high quality, to the same quality as the original?
Where is the best place to get them (I'm in the UK). I will replace it myself.
Thanks ever so much.
davestuarts said:
Hi, as you may guessed, broke my screen, quite badly though 95% touch interface still works and have kept it like this for about 2 months.
Now my patience is gone with the major crack lines and some yellow spots. Plus I have to always rotate to interact sometimes due to the 5% dead area of touch panel.lol
I've looked at replacements (as its been said, replace lcd+digitiser) but my question rests on the quality of the parts.
I've read through the forums and seen some ebays links. Are these genuine screen? Are they high quality, to the same quality as the original?
Where is the best place to get them (I'm in the UK). I will replace it myself.
Thanks ever so much.
Click to expand...
Click to collapse
Hey sad to hear that. I recently had to replace mine since soft keys stopped working, I bought cheap chinese 50usd and to my opinion is quality is at acceptable level - screen is as good as the original one, digitizer and assembly fitted perfectly my only concern is that its not a gorilla glass but other than that its(again in my opinion) is 1:1
Good luck with replacement
p.s If you have troubles with wifi after opening the phone check the threads there is one that shows fix for the bent antenna pins
peshko69 said:
Hey sad to hear that. I recently had to replace mine since soft keys stopped working, I bought cheap chinese 50usd and to my opinion is quality is at acceptable level - screen is as good as the original one, digitizer and assembly fitted perfectly my only concern is that its not a gorilla glass but other than that its(again in my opinion) is 1:1
Good luck with replacement
p.s If you have troubles with wifi after opening the phone check the threads there is one that shows fix for the bent antenna pins
Click to expand...
Click to collapse
Thanks peshko69. Yeah, really hurt me when the screen cracked. I guess all the technology in gorilla glass is only for scratches not dropped protection. First time ever I cracked a screen.
I will investigate further. I have found a company that looks very good Rounded.com. They seem to do genuine parts I think and prices are reasonable too.
btw thanks for the wifi tip.
davestuarts said:
Thanks peshko69. Yeah, really hurt me when the screen cracked. I guess all the technology in gorilla glass is only for scratches not dropped protection. First time ever I cracked a screen.
I will investigate further. I have found a company that looks very good Rounded.com. They seem to do genuine parts I think and prices are reasonable too.
btw thanks for the wifi tip.
Click to expand...
Click to collapse
No problem. For safety i would recommend something like http://www.ebay.com/itm/TPU-Gel-Silicone-Skin-Case-Cover-Screen-Protector-For-HTC-One-X-AT-T-LTE-XL-New-/320956130309?pt=LH_DefaultDomain_2&var=&hash=item4aba79e405 & http://www.ebay.com/itm/NEW-XtremeGuard-FULL-BODY-Clear-LCD-Screen-Protector-Shield-Skin-For-HTC-One-X-/320890807909?pt=US_Cell_Phone_Screen_Protectors&hash=item4ab6952665 - the case wraps around your phone and screen lies 2mm below the case and if dropped the case will absorb the impact( speaking from experience ).
Good luck
davestuarts said:
Thanks peshko69. Yeah, really hurt me when the screen cracked. I guess all the technology in gorilla glass is only for scratches not dropped protection. First time ever I cracked a screen.
I will investigate further. I have found a company that looks very good Rounded.com. They seem to do genuine parts I think and prices are reasonable too.
btw thanks for the wifi tip.
Click to expand...
Click to collapse
There used to be a dropped thread, one guy dropped his from the 2 floor (3rd floor for all you across the pond) and all the happened was the outer shell was crushed in the corner.
Then you get some people he just knock it off a sofa or bed and screen is a goner it's all about the landing.
Sent from my HTC One X using xda app-developers app
Hey All.
Been using nexus 7 2013 since last 2 years. My nephew dropped it and the screen cracked from the side. The device is working fine. The touch doesn't work at the the area of the cracks on the top right, and a few other places. But works everywhere else on the screen. My question is what has to be replaced, the digitizer or the entire LCD. My personal diagnoses is only the upper glass needs to be replaced. Please advice further!
Digitizer is for $15 and the whole thing is for $50. What has to be replaced and how to find out?
Please see the pictures and help me please
Get the whole thing. Replacing only digitazer is very difficult and compromises the tablet's construction.
no_cannabis said:
Get the whole thing. Replacing only digitazer is very difficult and compromises the tablet's construction.
Click to expand...
Click to collapse
agree with you
barriecary said:
agree with you
Click to expand...
Click to collapse
how much cost to replace?
I did it, two times, buy the glass+lcd+digitizer combo, you can find it at ~ $40
It takes 10 minutes to disassemble the tablet and 1h+ to separate the glass from the frame, the glue is very strong and the melting point is so high that you can melt the frame when trying to separate. Even doing this you will have to scrap the glue and zillions of microscopic bit of glass embeded in the glue. It's doable of course, but be patient!
I bought the screen + digitizer from Aliexpress about $20 last month
This was the guide I followed: https://www.youtube.com/watch?v=hAlNuGrGDuU
I didn't have heat gun or other thing, I just scratched the whole screen away from frame, took me couple of hours to completely replace the screen, but works nicely. This was the first time ever I've replaced a screen.
Just make sure you have double sided adhesive tape before you start, about ~3mm or so. My replacement screen didn't include that adhesive so I had to buy it separately.
well done..patience is the key, so id be not very good at it..haha..touch wood ive never dropped any of my tablets/mobiles, hopefully the cases i always put on would cushion any blows, i bought a used nexus 7 2013 and although cosmetically its in great shape, the lcd is showing blue blobs, like ink leakage..stuck pixels maybe, but i dont think you can just do the lcd change, the whole front would need buying which is pointless as i only paid £45 in the first place.. but im so impressed with it performance wise, i got a samsung t280 in the latest sale, returned it after 3 days, the chip inside was shockingly rubbish..