Development currently stopped due to mental health and life issues
DISCLAIMER:
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this Kernel before flashing it!
YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you.
A project by Offensive Security
The Kali NetHunter is an Android penetration testing platform targeted towards Nexus and OnePlus devices built on top of Kali Linux, which includes some special and unique features. Of course, you have all the usual Kali tools in NetHunter as well as the ability to get a full VNC session from your phone to a graphical Kali chroot, however the strength of NetHunter does not end there. We've incorporated some amazing features into the NetHunter OS which are both powerful and unique. From pre-programmed HID Keyboard (Teensy) attacks, to BadUSB Man In The Middle attacks, to one-click MANA Evil Access Point setups, access to the Offensive Security Exploit Database... And yes, NetHunter natively supports wireless 802.11 frame injection with a variety of supported USB NICs
This kernel is based on MCK Kernel 5.4.197 (November 6 2022)
Features:
MCK kernel tweaks enabled
Nethunter support
Supported Devices
SM-A528B; SM-A528N
What works
MAC Changing
External Wifi Adapters [https://www.kali.org/docs/nethunter/wireless-cards/]
Nmap
Bluetooth Arsenal [Need external adapter]
SET
DeAuth
Untested
MITM Framework
Pineapple Connector
Bad USB MITM
SDR
KeX
Wardriving
How to install
Unlock your bootloader
Flash a custom recovery
Boot to recovery [Twrp or OrangeFox]
Flash magisk
Flash the zip
Reboot to system
Make sure you have flashed the nethunter arm64 minimal or full zip from here : https://www.kali.org/get-kali/#kali-mobile
Thanks to
@BlackMesa123 - for MCK kernel
Bugs
Can't turn on wifi | Workaround: Manually load wlan.ko with termux or nethunter emulator as su insmod /vendor/lib/modules/wlan.ko
Sources
MCK Kernel: https://github.com/BlackMesa123/android_kernel_samsung_sm7325
Nethunter kernel:
https://github.com/clummmm/samsung_sm7325_nethunter/tree/sep-13.1/mesa
CHANGELOGS:
26 Feb 2023: Added rtl8188eus support
4 Feb 2023: Enabled MT76X1U and rtl8188
Now that's really cool. Gonna try it out.
hello. did you enable the MT7610u or MT76x0u driver for awus036achm alfa wifi adapter?
successfully installed but can't turn on Wifi
rocket4438 said:
successfully installed but can't turn on Wifi
Click to expand...
Click to collapse
Could you send me the logs on telegram: heyshawtybae
Clums said:
Could you send me the logs on telegram: heyshawtybae
Click to expand...
Click to collapse
where can i find the logs
Clums said:
Could you send me the logs on telegram: heyshawtybae
Click to expand...
Click to collapse
and i tried my awus036achm wifi adapter but didnt work. no drivers found with monitorer app
i'm using A528BXXU1CVH6 android 12 firmware.
rocket4438 said:
and i tried my awus036achm wifi adapter but didnt work. no drivers found with monitorer app
Click to expand...
Click to collapse
MT76x1U is should be enabled though, try a different adapter
EDIT: Forgot to enable it will enable it and push a new build
Clums said:
MT76x1U is should be enabled though, try a different adapter
EDIT: Forgot to enable it will enable it and push a new build
Click to expand...
Click to collapse
I updated the kernel with that driver enabled please download it and let me know if it works
Would be great if you could release the source code of the kernel to comply with the open source license
BlackMesa123 said:
Would be great if you could release the source code of the kernel to comply with the open source license
Click to expand...
Click to collapse
Done
Clums said:
MT76x1U is enabled though, try a different adapter
Click to expand...
Click to collapse
i already tried to install
Clums said:
Done
Click to expand...
Click to collapse
bro. which a52s PDA version did you use for installing nethunter kernel?.
rocket4438 said:
i already tried to install
bro. which a52s PDA version did you use for installing nethunter kernel?.
Click to expand...
Click to collapse
Did u install the updated file i uploaded? If not please do and try again if the same issue occurs please contact me on telegram, thank you
Clums said:
Did u install the updated file i uploaded? If not please do and try again if the same issue occurs please contact me on telegram, thank you
Click to expand...
Click to collapse
i want to know first the pda or baseband version you used to install nethunter kernel. can you tell me and i will install nh kernel again.
because yesterday. i have installed nethunter kernel but my wifi doesn't work and i forgot to save the logs. now i'm currently using a52s android 13 stock rom.
rocket4438 said:
because yesterday. i have installed nethunter kernel but my wifi doesn't work and i forgot to save the logs. now i'm currently using a52s android 13 stock rom.
Click to expand...
Click to collapse
Use android 12 as it states in the title its for 12 and not 13
Clums said:
Use android 12 as it states in the title its for 12 and not 13
Click to expand...
Click to collapse
yes i installed with android 12.
rocket4438 said:
yes i installed with android 12.
Click to expand...
Click to collapse
Try again and send me the log files on telegram
Can you provide a detailed tutorial for installing everything needed, I'm kind of stuck on what to do exactly.
kzyx said:
Can you provide a detailed tutorial for installing everything needed, I'm kind of stuck on what to do exactly.
Click to expand...
Click to collapse
Updated
Related
Introduction
Sailfish OS is a mobile operating system combining the Linux kernel for a particular hardware platform use, the open-source Mer core middleware, a proprietary UI contributed by Jolla, and other third-party components.
Click to expand...
Click to collapse
This is a port of Sailfish OS to cancro (Xiaomi Mi3/Mi4), based on CyanogenMod 12.1.
What Works: https://wiki.merproject.org/wiki/Adaptations/libhybris#Smartphones (Check Xiaomi Mi3)
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Whats new:
Updated to Sailfish 2.1.3.7
Click to expand...
Click to collapse
Known issues:
1) Wifi mac address not detected properly
Click to expand...
Click to collapse
Current TODOs: Sailfish OS on cancro's Trello Board
Download links:
Cyanogenmod 12.1 base: https://www.androidfilehost.com/?fid=529152257862691291 (Mirroring this, as CM servers are shutting down)
Sailfish OS rootfs: https://www.androidfilehost.com/?fid=817906626617953262
Click to expand...
Click to collapse
Installation Instructions:
NOTE: This release is also available as an OTA to existing users.
1) Make sure your device has the new partition layout needed for Android M and a custom recovery. Boot to Recovery, wipe cache, dalvik-cache, system and data. ( https://jrizzoli.github.io/dotfiles/ )
2) First install cm-12.1-20151117-SNAPSHOT-YOG7DAO1K6-cancro.zip As your base ROM, and make sure it works well.
3) Then Install sailfishos-cancro-release-2.1.3.7-beta.zip on top of it. This will replace your boot image with sailfish boot image, and installs sailfish os to /data/.stowaways/sailfishos . The installation can take a little while, so be patient.
If you are already running, CM12.1 YOG7D/already have SailfishOS installed, you can simply flash the Sailfish OS without wiping flash/partition.
Click to expand...
Click to collapse
Big kudos to @mixmoto and Nokius, for patiently testing this release over and over.
P.S Thank you all for your support. I really really appreciate it - and it's what motivated me to make some time in my busy days to create this release. Wish you all Happy Holidays!
XDA:DevDB Information
Sailfish OS for cancro, ROM for the Xiaomi Mi 3
Contributors
saidinesh5, Ar4er, Folks at #sailfishos-porters, especially @mal-
Source Code: https://github.com/CancroSailors
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Must have CM12.1-YOG7D
Based On: CyanogenMod 12.1-YOG7D
Version Information
Status: Alpha
Created 2016-09-15
Last Updated 2018-01-07
Hey Dinesh,
Thanks for your work,
does this have sfdroid support?
Ekril said:
Hey Dinesh,
Thanks for your work,
does this have sfdroid support?
Click to expand...
Click to collapse
Hey, Nope. SFDroid support is on my TODO list for now.
It may take a while though. I need a Multirom working with CM13.0(which is my primary ROM), so I can safely port all the needed changes for SFDroid to my CM12.1 base without losing all my data. Any help welcome here!
Cheers
saidinesh5 said:
Hey, Nope. SFDroid support is on my TODO list for now.
It may take a while though. I need a Multirom working with CM13.0(which is my primary ROM), so I can safely port all the needed changes for SFDroid to my CM12.1 base without losing all my data. Any help welcome here!
Cheers
Click to expand...
Click to collapse
Thank you!!! this is awesome!!
Almost everything it seems to be working :good:
Is it stable for daily use?
Rocketval said:
Thank you!!! this is awesome!!
Almost everything it seems to be working :good:
Is it stable for daily use?
Click to expand...
Click to collapse
Great!
Right now i don't think it's ready for daily use yet, as sometimes my device's sensors and audio stop working randomly. Not sure if it is just my device though (because of some weird hacks I've been using).
I suspect this maybe because the CM 12.1 zip i was using to boot differs from the sources I've used to compile this rom. Once that issue is fixed, i think this will be usable for daily use. Camera works, Browser works, basic apps work.. And compiling that cm 12.1 means even sfdroid will work ...
saidinesh5 said:
Great!
Right now i don't think it's ready for daily use yet, as sometimes my device's sensors and audio stop working randomly. Not sure if it is just my device though (because of some weird hacks I've been using).
I suspect this maybe because the CM 12.1 zip i was using to boot differs from the sources I've used to compile this rom. Once that issue is fixed, i think this will be usable for daily use. Camera works, Browser works, basic apps work.. And compiling that cm 12.1 means even sfdroid will work ...
Click to expand...
Click to collapse
For what I know only few cm12 builds worked fine when flashed before sfos..
Maybe you need another build.. I don't know..
Rocketval said:
For what I know only few cm12 builds worked fine when flashed before sfos..
Maybe you need another build.. I don't know..
Click to expand...
Click to collapse
Could be. Most bugs i had to fix last week were because of differing versions too. That's why I'm trying to compile a cm12.1 right now.
Also right now as I'm on CM13.0, i was just using a system.img from the CM12.1.zip.. And making sailfish loop Mount that as the actual /system/ . not sure if that's causing any issues.
Right now my options are port multirom to CM13.0 (having some weird errors there) or wipe my device clean and downgrade to CM12.1 (have been trying to avoid this for months now!).
saidinesh5 said:
Could be. Most bugs i had to fix last week were because of differing versions too. That's why I'm trying to compile a cm12.1 right now.
Also right now as I'm on CM13.0, i was just using a system.img from the CM12.1.zip.. And making sailfish loop Mount that as the actual /system/ . not sure if that's causing any issues.
Right now my options are port multirom to CM13.0 (having some weird errors there) or wipe my device clean and downgrade to CM12.1 (have been trying to avoid this for months now!).
Click to expand...
Click to collapse
Yeah, we definetely need multirom, with 64gb mi4w I have more than 32+ free and a lot of will to try
Thank bro
Thank you!!!
As a temporary fix for radio, pulseaudio could be restarted, NOT as root.
Code:
systemctl restart pulseaudio --user
adeen-s said:
As a temporary fix for radio, pulseaudio could be restarted, NOT as root.
Code:
systemctl restart pulseaudio --user
Click to expand...
Click to collapse
I currently use this command everytime i wanted the FM radio to work. I will have to look into why this is failing by default though
Code:
$pactl set-source-port source.primary input-fm_rx
i cant undersatand for what need to flash cm-12.1? I cant flash clean sailfish.zip?
UPD can i flash gapps and supersu?
Dr. Ramm said:
i cant undersatand for what need to flash cm-12.1? I cant flash clean sailfish.zip?
UPD can i flash gapps and supersu?
Click to expand...
Click to collapse
this isn't android, you cannt flash gapp
Dr. Ramm said:
i cant undersatand for what need to flash cm-12.1? I cant flash clean sailfish.zip?
UPD can i flash gapps and supersu?
Click to expand...
Click to collapse
Due to legal reasons, Sailfish OS doesn't bundle the proprietary blobs(device drivers, system libraries etc..) provided by the phone vendors in it's zip.
As I have compiled Sailfish OS using sources from CM-12.1, it tries to access these proprietary files on your device via. CM-12.1 libraries. That's why you have to flash a CM-12.1 zip first, before flashing Sailfish OS. (i.e just clean flashing sailfish.zip won't work)
As of now, you don't have to flash gapps, as there is no way to use them from Sailfish OS. Once we get sfdroid running, we can run Android apps from within Sailfish OS, then you can flash gapps if you want.
Sailfish OS already comes with an su binary (accessed via. devel-su command) and full root access. So, you won't need Super SU.
saidinesh5 said:
As I have compiled Sailfish OS using sources from CM-12.1, it tries to access these proprietary files on your device via. CM-12.1 libraries. That's why you have to flash a CM-12.1 zip first, before flashing Sailfish OS. (i.e just clean flashing sailfish.zip won't work)
Click to expand...
Click to collapse
got it
saidinesh5 said:
As of now, you don't have to flash gapps, as there is no way to use them from Sailfish OS. Once we get sfdroid running, we can run Android apps from within Sailfish OS, then you can flash gapps if you want.
Click to expand...
Click to collapse
Stock market not working (as u say in 1st post) but how i can install some apps?
saidinesh5 said:
Sailfish OS already comes with an su binary (accessed via. devel-su command) and full root access. So, you won't need Super SU.
Click to expand...
Click to collapse
nice
run very smooth on my mi3
Dr. Ramm said:
got it
Stock market not working (as u say in 1st post) but how i can install some apps?
nice
Click to expand...
Click to collapse
You can use https://openrepos.net/content/basil/warehouse-sailfishos app to install apps.. I will include this in the zip for the next build (Which will soon be available).
First enable installation of untrusted software in Settings, then download the latest rpm of that from your browser and install it.
saidinesh5 said:
You can use https://openrepos.net/content/basil/warehouse-sailfishos app to install apps.. I will include this in the zip for the next build (Which will soon be available).
First enable installation of untrusted software in Settings, then download the latest rpm of that from your browser and install it.
Click to expand...
Click to collapse
can u tll me where located screenshots and how i can upload it on pc
some screens is here
after turn off mi3 10s, i dont turn on device
What is Kali NetHunter?If you don't know what NetHunter is read this: https://www.kali.org/kali-linux-nethunter/
Q: Why don't I flash the original nethunter version by keeping my current kernel?
A: To get Nethunter fully work you need a kernel that supports its features, such as put a wireless adapter in monitor mode or perform a HID Keyboard attack
Special Patches included in this kernel:
mac80211 injection patch, to put wireless adapters in monitor mode; note that built-in wireless chipset doesn't support monitor mode and you have to use external wireless adapter (see supported wireless cards here)
HID patch, to perform HID keyboard attacks
CD-ROM patch, to emulate CD-ROMs in DriveDroid
Warning!!!:
This version is not tested by me (since I don't have a hono 5x ) but it's tested by another user that told me it works, so, if it doesn't blame him not me
Disclaimer:
Code:
I'm not responsable for bricked devices :( , dead phone chargers,
nuclear explosions or global warming.
Flash it at YOUR OWN RISK.
Required Downloads:
Download any CM based ROM
Download any custom recovery (like twrp)
Download my Nethunter "ROM" here: https://androidfilehost.com/?w=files&flid=118871 All future updates will be in that folder
How to Install (CM/RR):
Note: When you flash my zips, don't check "zip signature verification" box in TWRP recovery
1) Install TWRP
2) Enter in TWRP recovery
3) Flash any CM based (like cm, rr, aicp...) ROM
4) Optional: flash Google Apps after flashed a cm based recovery
5) Flash NetHunter zip
7) Reboot
8) Open Nethunter app and go to menu<chroot manager<install chroot and download the full chroot, for devices which have more storage available, or minimal chroot, for devices which have less space available
9) Close NetHunter app and reopen it to complete the installation
10) Enjoy
Important: I called NetHunter "ROM", but it isn't a ROM, so, you don't have to wipe system partition.
Note: report only bugs related to NetHunter and not to cm based roms
Kernel Source Code:
https://github.com/DeadSquirrel01/android_kernel_huawei_kiwi branch cm-13.0
Now you can build it by youself on official HetHunter source page
You Need this https://github.com/offensive-security/kali-NetHunter
and this https://github.com/offensive-security/nethunter-devices (branch experimental for now )
For Any questions contact me at: [email protected]
Credits: @jcadduono, binkybear and offensive security team for NetHunter source code
XDA:DevDB Information
[MOD] Kali NetHunter for Honor 5x, Kernel for the Honor 5X
Contributors
DeadSquirrel01
Kernel Special Features: mac80211 Packet Injection Patch, HID gadget USB/Mouse Patch, CD-ROM Patch for emulate CD-ROMS in DriveDroid
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2016-10-01
Created 2016-10-01
Last Updated 2016-10-01
already using it NYC work
Will someone explain what this does?? I tried the link but couldn't get much out of it.... Thnx
Sent from my KIW-L21 using Tapatalk
Faheemarif252 said:
Will someone explain what this does?? I tried the link but couldn't get much out of it.... Thnx
Click to expand...
Click to collapse
Well, Mate its actually used for pentesting or penetration testing of wifi or wireless networks... google it for detail information.
mumith3 said:
Well, Mate its actually used for pentesting or penetration testing of wifi or wireless networks... google it for detail information.
Click to expand...
Click to collapse
Yep, it's for pentesting
it is a amazing kernel, wow.
kaankulahli said:
it is a amazing kernel, wow.
Click to expand...
Click to collapse
I know
Gonna try it
Kali Linux on Honor 5X! This is amazing!
Downloaded and flashed on KIW-L22 - On Tipsy OS - AOSP and AOKP (CM Based) - Initial boot took a while longer than normal, got a boot loop first, but it came back up after cache/dalvik wipe
Kali chroot manager stuck in "Checking" even after 10 minutes though
Edit: Lost root on installing this and didn't notice it, and busybox too.....reinstalling SuperSU through TWRP is not bringing it back root access either, so cannot install busybox too......nethunter app returned an error for not getting root access and no busybox installation!
PS: In love with the boot animation!!
nandakalyan said:
Downloaded and flashed on KIW-L22 - Kali chroot manager stuck in "Checking" even after 10 minutes though
1. On Tipsy OS - AOSP - working fine! Initial boot took a while longer than normal, got a boot loop first, but it came back up after cache/dalvik wipe
2. On AOKP (CM based) - Flash and wipe cache/dlavik, took a while longer but booted up normally, but I guess it will settle
Still trying to figure out how and what to use it for but just wanted to report back that the flashing process went well!!
PS: In love with the boot animation!!
Click to expand...
Click to collapse
mmm, stucking in checking it's very strange. Maybe compile a full zip here https://github.com/offensive-security/kali-nethunter (you have to clone
https://github.com/offensive-security/nethunter-devices, too (branch experimental) then for build with full chroot, just type:
$ python build.py -d kiwi --marshmallow --release v1.0 --rootfs-full
Anyway i will upload the zip with full chroot once i finish my cm14 port for a5
DeadSquirrel01 said:
mmm, stucking in checking it's very strange. Maybe compile a full zip here https://github.com/offensive-security/kali-nethunter (you have to clone
https://github.com/offensive-security/nethunter-devices, too (branch experimental) then for build with full chroot, just type:
$ python build.py -d kiwi --marshmallow --release v1.0 --rootfs-full
Anyway i will upload the zip with full chroot once i finish my cm14 port for a5
Click to expand...
Click to collapse
Thanks man, I wish I knew enough to compile and run things on github just edited by previous post.....it seems it got stuck because of no root access and busybox missing. Lemme know if i can test things out for you, glad to be of any help that way!
---------- Post added at 07:52 PM ---------- Previous post was at 07:12 PM ----------
OK, just figured it was me being a bit duh on the whole thing! I just reinstalled the whole ROM, and flashed this again. Installed SuperSU from playstore (it went missing after installing this) and things are back to normal.....now downloading full chroot! Hurray!
[/COLOR]OK, just figured it was me being a bit duh on the whole thing! I just reinstalled the whole ROM, and flashed this again. Installed SuperSU from playstore (it went missing after installing this) and things are back to normal.....now downloading full chroot! Hurray![/QUOTE]
Strange, the zip should include SuperSU
Hi,
where can I find the full chroot file (~ 750Mo), I want to download it manually
+
Why "wifite" does not recognize my hama adapter with Ralink RT2500 chipset?!
It is identified but when I choose the interface, it still returns the menu of choice
thanks for your help
panther2005 said:
Hi,
where can I find the full chroot file (~ 750Mo), I want to download it manually
+
Why "wifite" does not recognize my hama adapter with Ralink RT2500 chipset?!
It is identified but when I choose the interface, it still returns the menu of choice
thanks for your help
Click to expand...
Click to collapse
You can download chroot here:
https://build.nethunter.com/kalifs/
Regarding your adapter, read this: https://github.com/offensive-security/kali-nethunter/wiki/Wireless-Cards
Unlucky, your adapter does not support nethunter
DeadSquirrel01 said:
You can download chroot here:
https://build.nethunter.com/kalifs/
Regarding your adapter, read this: https://github.com/offensive-security/kali-nethunter/wiki/Wireless-Cards
Unlucky, your adapter does not support nethunter
Click to expand...
Click to collapse
Thanks bro
I even tried the alfa rtl8187l chipset without any result,
The problem is the low current for the adapter from the phone,
The usb hub with an external power supply maybe solves the problem, but it is not practical for a displacement
thanks again DeadSquirrel01
Sent from my KIW-L21 using XDA-Developers mobile app
panther2005 said:
Thanks bro
I even tried the alfa rtl8187l chipset without any result,
The problem is the low current for the adapter from the phone,
The usb hub with an external power supply maybe solves the problem, but it is not practical for a displacement
thanks again DeadSquirrel01
Sent from my KIW-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
For this i dunno, i'm not an elctronic expert ^^
DeadSquirrel01 said:
For this i dunno, i'm not an elctronic expert ^^
Click to expand...
Click to collapse
I must choose
kalifs-armhf-full.log
kalifs-armhf-full.sha512sum
kalifs-armhf-full.tar.xz
for KIW-L21?
panther2005 said:
I must choose
kalifs-armhf-full.log
kalifs-armhf-full.sha512sum
kalifs-armhf-full.tar.xz
for KIW-L21?
Click to expand...
Click to collapse
The .tar.xz one
Hey all,
so i flashed the nethunter zip with no hiccups.
However, now my wifi wont connect.
Does anyone know what might be the problem?
This Thread is deprecated!
Please use https://forum.xda-developers.com/sony-xperia-z1-compact/development/rom-lineageos-15-1-xperia-z1-compact-t3884247/
We'll provide Lineage 15.1 builds there as well. They come in two different flavours:
pure LineageOS
Security hardened microG LineageOS
Functionality is completely the same as provived by the builds from this thread - they are build from the same sources. Only difference: The new builds are signed to guarantee a maximum of security.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Status
List template by AdrianDC
Code:
- Boot : Ok
- GApps : OpenGApps Micro recommended
- Partitions (Data, Cache) : Ext4 and F2FS supported
- Bluetooth : Ok
- WiFi : Ok
- WiFi Hotspot : Ok
- RIL - Phone - Data : Ok
- GPS : Ok
- Camera : Ok
- Camcorder : Ok
- Lights : Ok
- MicroSD : Ok
- Accelerometer : Ok
- Compass : Ok
- Gyroscope : Ok
- Touchscreen : Ok
- FM Radio : Ok
- ANT+ : Ok
- Vibrator : Ok
- Microphone : Ok
- Audio & music : Ok
- Bluetooth audio : Ok
- MHL: didn't test
- NFC : Ok
- Kernel : Ok
- Graphics : Ok
- 3D Rendering : Ok
- Clock : Ok
- Offline Charging : Ok
- USB : Ok
- USB OTG : Ok
- Encryption : Ok, but installing updates only works with adb sideload!
- SEPolicies : Enforcing
Download
https://androidfilehost.com/?w=files&flid=269301
latest version: https://www.androidfilehost.com/?fid=11410963190603873784
Click to expand...
Click to collapse
FAQ
What about device encryption?
Device encryption is working. You only have to keep in mind that you need a PC with adb to install systemupdates.
Flashing via recovery isn't working until now, because there isn't a recovery capable of decrypting Oreo /data partitions at the moment. But an easy "adb sideload" should do the job. Or installing from the external SD card.
Click to expand...
Click to collapse
What about reboot to recovery?
Reboot to recovery is only working with magisk installed. Investigating this...
Reboot to recovery is working as it should now (and of course also without magisk).
Click to expand...
Click to collapse
What about GPS?
GPS apps like GPS Status&Toolbox or SatStat don't get location fixes. Nevertheless navigating with Osmand or googleMaps should work. Positionfinding is also slow. Got better
Click to expand...
Click to collapse
I found a bug. What should I do?
We need your feedback for optimization. But your feedback is only useful in connection with logs --> see section Bugreports
Click to expand...
Click to collapse
What about root access?
Root isn't included per default (except root over adb, but it's off by default).
If you want to gain root access to your apps use one of these (depending on your taste/needs):
Official Lineage Add-on https://download.lineageos.org/extras use su (arm) 15.1 here and flash via TWRP
Magisk https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
Bugreports
You'll find information about logging here.
Please also note how you got the error or how it can be reproduced.
Click to expand...
Click to collapse
Sources
Kernel: https://github.com/AICP/kernel_sony_msm8974
Manifest: https://github.com/115ek/manifest
Click to expand...
Click to collapse
Credits
SpiritCroc: big thanks to him for maintaining the device trees and a lot of very useful hints
rcstar6696
SuperLamic
drakonizer
AdrianDC
munjeni: thanks for tips and tricks
nailyk: thanks for tips and tricks
All the other contributors on sony msm8974 platform
LineageOS team
Click to expand...
Click to collapse
XDA:DevDB Information
Lineage OS 15.1 for Xperia Z1 compact - amami, ROM for the Sony Xperia Z1 Compact
Contributors
115ek, SpiritCroc, drakonizer, rcstar6696, SuperLamic, AdrianDC, nailyk, LineageOS team
Source Code: https://github.com/115ek/manifest
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Beta Release Date: 2018-09-10
Created 2018-09-10
Last Updated 2019-03-18
Changelog
13.12.2018
fixed wrong bluetooth MAC address (00:00:00:00:5a:ad on all devices), now displaying correct device specific one
12.12.2018
synced LineageOS sources (security patch level December 05, 2018)
11.11.2018
fix problem with Lineage SU addon by using 64-bit binder API (thanks @NyQuilXT)
synced LineageOS sources (security patch level November 05, 2018)
14.10.2018
fixed GPS 3D fix
08.10.2018
fixed MHL (thanks @koron393)
added callrecording
synced LineageOS sources (security patch level October 05, 2018)
23.09.2018
fixed reboot to recovery without magisk
minor improvements from AICP devices trees (thanks @SpiritCroc)
synced LineageOS sources
10.09.2018
initial release
Hi 115ek. Thanks for making this. I'm not new to flashing but I have a question nonetheless. What do you mean by
Encryption : Ok but needs recovery capable of Oreo decryption for installing updates (AFAIK such a recovery doesn't exist until now for our device...)
Click to expand...
Click to collapse
I'm actually having some trouble finding a up-to-date recovery.
Jeroen1000 said:
Hi 115ek. Thanks for making this. I'm not new to flashing but I have a question nonetheless. What do you mean by
I'm actually having some trouble finding a up-to-date recovery.
Click to expand...
Click to collapse
You can use this https://androidfilehost.com/?fid=5862345805528046823 or that https://forum.xda-developers.com/sony-xperia-z1-compact/orig-development/recovery-twrp-3-2-1-t3759450.
For Lineage 15.x flashing you need TWRP>=3.2.x If the version is older you'll end up in a error 7.
Concerning decryption: Google introduced some new encryption stuff and so the decryption of /data from inside TWRP is broken. Some guys are working on it (@nailyk).
Encrypting the device should work fine, but I don't know what happens if you want to update the encrypted device. (I'm going to test that ).
Basically you need to store the update package outside of encrypted partitions... Maybe adb sideload works - but it's circumstantial.
Edit:
That's only interesting if you plan to encrypt your device. Otherways you can relax.
Edit2:
adb sideload should do the job. But you need a PC for updating. Installing an image directly via recovery isn't possible until now.
With sources for both kernel and system unlike the other port! Thanks, I'll definitely be using this!
Xperia J1 Compact
could this work on an Xperia J1 Compact?
it's basically the same phone with the same specs right?
The rom looks very stable and balance, but I've some problems with root procedure. I tried the lineage addon, the root seems active, but opening apps (es. Ad away) results unrooted, any ideas?
Update: Now Works. Flashed lastest Magisk
Amazing to see this old device on Oreo, just installed and it feels smooth and nice. Just a pity that I have broken the sim card connectors inside so I cant use it as a phone but I will fins use of it at home just for fun. Thank you for your work 115ek :good:
Great to see this rom realy! This rom have stock camera?
munjeni said:
Great to see this rom realy! This rom have stock camera?
Click to expand...
Click to collapse
What do you mean with stock camera?
There was a thing with kernel versions 3.4 and 3.10, wasn't it? We're using 3.4.
Concerning the camera: I'm not that expert, but it looks okay I would say.
Feel free to contribute: There's still the reboot-to-recovery problem and Pie is in the starting blocks.
115ek said:
Feel free to contribute: There's still the reboot-to-recovery problem and Pie is in the starting blocks.
Click to expand...
Click to collapse
my phone reboots to recovery.
Need to install Magisk
without it I also do not reboot to recovery
raschad said:
my phone reboots to recovery.
Need to install Magisk
without it I also do not reboot to recovery
Click to expand...
Click to collapse
Thanks, but I already knew this
But I like to reboot to recovery without magisk. I think there are people around who don't like/need magisk (including me).
The fact that it works with magisk may locate the problem to the boot.img. I have init_sony in mind and will check that.
Any ideas welcome
115ek said:
Thanks, but I already knew this
But I like to reboot to recovery without magisk. I think there are people around who don't like/need magisk (including me).
The fact that it works with magisk may locate the problem to the boot.img. I have init_sony in mind and will check that.
Any ideas welcome
Click to expand...
Click to collapse
I meant does this rom have stock camera blobs? Do you have property: ro.bootmode
and does /proc/cmdline shows diferent bootreason when you set reboot reason to recovery?
munjeni said:
Do you have property: ro.bootmode
and does /proc/cmdline shows diferent bootreason when you set reboot reason to recovery?
Click to expand...
Click to collapse
Good news: an easy import of your init_board_device.h did the trick. Maybe a timing problem?
Anyway: reboot to recovery is now working correctly, even without magisk
Is that okay for you: http://gerrit.aicp-rom.com/c/AICP/device_sony_msm8974-common/+/73688 ?
I just found this https://github.com/LineageOS/androi...neage-15.1/init/init_sony/init_board_device.h its just prototype so seems you have missed init_sony/init_board_device.h in your device tree...
munjeni said:
I meant does this rom have stock camera blobs?
Click to expand...
Click to collapse
We're using them https://github.com/AICP/proprietary_vendor_sony/tree/o8.1/rhine-common/proprietary/vendor, so I guess yes.
You're more into topic, aren't you? How to distinguish between AOSP and stock blobs? There were some mysteries around DRM, camera quality and so on. I remember a separate thread you also participated in...
But I'm not really into this topic.
munjeni said:
I just found this https://github.com/LineageOS/androi...neage-15.1/init/init_sony/init_board_device.h its just prototype so seems you have missed init_sony/init_board_device.h in your device tree...
Click to expand...
Click to collapse
No, it's actually in here: https://github.com/AICP/device_sony_msm8974-common/blob/o8.1/include/init_sony/init_board_device.h
But It's different from yours. Yours performs another keycheck.
Seems rom have stock blobs. To distinguish between AOSP and stock blobs... depends on kernel you have using, aosp kernel can't be used with stock blobs since aosp camera kernel module is diferent, but I'm out of development for long, have no free time and to be honest I still didn't forgot treatment & injustice for my status on xda, that made me more inactive here. Recognised members have bad treatment here, seems senior members have much more priority than recognised members, and thats reason why everybody here need to care how many hours per day to waste here. I decided to stop wasting my time on xda since xda leaders do not respect anybody's hard work here. I recommend the same to everyone here.
I tried "reboot to recovery", after Sony logo the phone reboot again (also if you press recovery button), and to enter in recovery you've to push again the button at the second reboot.
It is like a normal reboot... But it's not a problem ?
ULT][MO said:
I tried "reboot to recovery", after Sony logo the phone reboot again (also if you press recovery button), and to enter in recovery you've to push again the button at the second reboot.
It is like a normal reboot... But it's not a problem
Click to expand...
Click to collapse
What recovery are you using? I recommend this one: https://forum.xda-developers.com/sony-xperia-z1-compact/orig-development/lineageos-12-1-z1c-current-sec-patches-t3614936.
With mine from here https://forum.xda-developers.com/sony-xperia-z1-compact/orig-development/recovery-twrp-3-2-1-t3759450 it still won't work. Maybe a timing thing.
But it's okay if we have at least one working TWRP.
And oreo /data decryption is still an issue we have to address.
ATTENTION!
Code:
[COLOR="red"]!!! I AM NOT RESPONSIBLE FOR ANY POSSIBLE DAMAGE DONE TO YOUR DEVICE AS A RESULT OF FLASHING AND I AM NOT RESPONSIBLE FOR ANY BRICKED PHONES OR LOST DATA! FLASH AT OWN RISK !!![/COLOR]
Introduction
This ROM was created for personal use. It was compiled from last sources with some personal changes and bug fixes. It's based on Lord Boeffla's kernel for LineageOS 15.1 ROM with all Kali NetHunter features included. Unfortunately Lord Boeffla stopped developing for Android so it's possibly the last available kernel from him. This ROM was tested on OnePlus 3T LineageOS 15.1 clean installed ROM with NanoDroid microG and MagiskSU.
Click to expand...
Click to collapse
Features
based on boeffla kernel with config app features support
mac80211 packet injection
usb hid
SYSTEM V support for PostgreSQL & msfconsole functionality
usb bluetooth
usb dongle modem support
modprobe support
built-in drivers for Ralink RT3070I & RTL8192CU chipsets
usb dvb- & radio-receivers support
NetHunter app with last changes & fixes
drive droid v.1.38 (older version) with cd-rom & usb-rw support
binkybear-terminal with notification bar support
other NetHunter's features
Installation instructions
Boot to TWRP recovery.
Flash the nethunter-oneplus3T-los-oreo-kalifs-full.zip
Reboot to system.
Run NetHunter App and apply all requirements & give it root privileges.
Launch DB Feed in SearchSploit section to initialize the exploits db.
Launch Android Terminal & give it root privileges.
Run 'apt update && apt dist-upgrade -y' command to get the latest updates.
Launch other apps to set them up.
Special installation instructions
There are some "issues" I've discovered during the compiling and installation. I don't know if they are general or just specific one and depends on using NanoDroid microG and MagiskSU. But as it is.
1. All apps removes from /data/app/ after ROM installation complete and I have to manually install them to make everything works. So I've attached all apps in the Download section if anybody will face the same issue.
P.S. This issue was fixed in last commits from kali-nethunter git. So I've recompiled it from sources and added to nethunter installer. But haven't tested.
2. After the first clean installation of NetHunter with built in kernel Boeffla Config App can't sometimes to initialize the kernel. In this case you should boot to TWRP recovery and flash standalone kernel's zip. After that everything should work's great.
Downloads
Downloads:
NetHunter Full ROM Installer
NetHunter's Apps
Boeffla-LOS-15.1-NH-Kernel
Sources:
kali-nethunter
nethunter-devices
nethunter-app
boeffla-kernel-los-nethunter-oneplus3T
Thanks to/Credits
Code:
[URL="https://www.boeffla.de/"]Lord Boeffla[/URL]
[URL="https://www.offensive-security.com/"]Offensive Security[/URL]
[URL="https://lineageos.org/"]LineageOS[/URL]
[URL="https://github.com/binkybear"]BinkyBear[/URL]
[URL="https://github.com/pelya"]pelya[/URL]
[URL="https://github.com/Re4son"]Re4son[/URL]
[URL="https://github.com/kimocoder"]kimocoder[/URL]
XDA:DevDB Information
OnePlus3T LineageOS 15.1 NetHunter, ROM for the OnePlus 3T
Contributors
flypatriot
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: LineageOS 15.1
Version Information
Status: Testing
Created 2019-04-05
Last Updated 2019-04-11
Reserved
Changes at 2019.04.05:
Replaced NetHunter App with last build from Re4son.
Removed modprobe_fix script and how-to-use-it section from installation guide. We don't need it anymore (all thank's to Re4son).
Rebuild NetHunter installer with new App.
Changes at 2019.04.11:
Fixed bluetooth doesn't power on issue.
Added new compiled chroot with last fixes and updates.
Fixed issue with app's installation in android oreo.
thanks for share :good:
Does the monitor mode work without an external antenna?
jorge705 said:
thanks for share :good:
Does the monitor mode work without an external antenna?
Click to expand...
Click to collapse
No. I was searching a lot of time for custom firmware with monitor mode and packet injection support for QCA6174 model but there is nothing at the moment. So you should use external adapters from recommendation list in official Kali wiki.
It would be pretty neat, if the rom would run on the Oneplus 3 as well... :x
UsPdSr said:
It would be pretty neat, if the rom would run on the Oneplus 3 as well... :x
Click to expand...
Click to collapse
I was thinking about 3 model in the beginning of developing but the thing is I can't publish untested roms. And I don't have a OnePlus 3 model to test everything by myself. But if you want I can compile it just for you. But I can't give you any guarantees.
It would be greatly appreciated if you could compile it for op3 pie, thanks anyway:good:
DoN LoUhI said:
It would be greatly appreciated if you could compile it for op3 pie, thanks anyway:good:
Click to expand...
Click to collapse
You can check Havoc based kernel published here https://forum.xda-developers.com/on...nel-kali-nethunter-oneplus-3t-t3507816/page27 (see last comments from MrM0NS73R).
flypatriot said:
You can check Havoc based kernel published here https://forum.xda-developers.com/on...nel-kali-nethunter-oneplus-3t-t3507816/page27 (see last comments from MrM0NS73R).
Click to expand...
Click to collapse
Thanks man, I would hope finding one for stock oos pie. any suggestions ?!
DoN LoUhI said:
Thanks man, I would hope finding one for stock oos pie. any suggestions ?!
Click to expand...
Click to collapse
Take a look to ZaneZam's threads. I'm sure he's already made some builds. I've been using his kernels earlier and they were really great.
flypatriot said:
I was thinking about 3 model in the beginning of developing but the thing is I can't publish untested roms. And I don't have a OnePlus 3 model to test everything by myself. But if you want I can compile it just for you. But I can't give you any guarantees.
Click to expand...
Click to collapse
I would gladly be the tester if you don't mind the additional work.
We could talk this over Pm or another messaging app if you prefer.
Also congrats to the the successful implementation of your work in the Nethunter repository!
it is compatible with my RTL8188EU ?
flypatriot said:
Take a look to ZaneZam's threads. I'm sure he's already made some builds. I've been using his kernels earlier and they were really great.
Click to expand...
Click to collapse
That great man, I've been using his kernel too on oos Oreo and it was awesome. I hope he would make a build for stock pie as well.
[TWRP]
Failed to install Kali Nethunter!
Updater process ended with ERROR: 1
why?
net hunter
What OS/Kernel/packages combo is neded to get it to work on the 1+3T ?
You have to to make sure you magisks is working or super su before you flash the kalinethuner zip. i had the same problem
i got kalinethunter running with chroot installed but i dont have the nethunter terminal anyone else got a fix for this ?
Can i Flash Nethunter Kernal for OnePlus 3T nougat to OnePlus 3T Android pie? if no then how to get Nethunter kernal for OnePlus 3T Android 9 pie ?
please explain
without any rom installed this Nethunter Rom is not being install, while Having Havoc 2.xx installed this rom is got installed but issues.
is it important to install this rom over other Rom?
is it compatable with Havoc 2.6?
flypatriot said:
No. I was searching a lot of time for custom firmware with monitor mode and packet injection support for QCA6174 model but there is nothing at the moment. So you should use external adapters from recommendation list in official Kali wiki.
Click to expand...
Click to collapse
can you try this tutorial? pls :crying:
https://github.com/The-Cracker-Tech...ki/How-to-enable-monitor-mode-in-all-devices?
DoN LoUhI said:
Thanks man, I would hope finding one for stock oos pie. any suggestions ?!
Click to expand...
Click to collapse
flypatriot said:
Take a look to ZaneZam's threads. I'm sure he's already made some builds. I've been using his kernels earlier and they were really great.
Click to expand...
Click to collapse
See the last post in this thread.. it's stock 9.0.3 kernel with WiFi adapter drivers and other nethunter features.
https://forum.xda-developers.com/oneplus-3/development/kernel-coconut-kernel-oos-oreo5-x-x-t3902040
End of Life Nethunter Kernel for Samsung Galaxy S7 (SM-G930F/FD) LineageOS 16.0
Code:
I am not responsible for bricked devices.
If you going to flash it, you accepted it.
Of course your warranty is void.
This thread is only for herolte . If you have Edge go here
Nethunter Features:
BadUSB
HID gadget keyboard/mouse (with possibility to temporarily disable)
DriveDroid
USB WiFi, mac80211 (Monitor mode, packet capture, packet injection) [Compatibility List]
Ethernet
F2FS
Bluetooth HCI USB support
RTL-SDR DVB support
Extra:
Boeffla wakelock blocker v1.10
Wireguard
Download:
Latest version G930F here.
Installation:
1. TWRP Backup your ROM
2. Flash G930F_Nethunter_LineageOS16.0_v*.img
3. Flash latest Magisk
4. Install busybox can be one from Magisk repository
5. Install Magisk Nethunter module from repository it have all apps which are needed to get fully working Nethunter (Another version of Nethunter apk link)
6. Install kalifs-armhf-*.tar.xz by Nethunter manager
7. Extract Nethunter_Binaries.7z and binaries to folders:
Firmwares: system/etc/firmware and give permissions to every file rw-r--r--
hid-keyboard binary: system/xbin/ and give permissions to it rwxr-xr-x
8. Reboot
Now you have Nethunter on your LineageOS 16.0 ROM.
Extra:
In Utilities.7z are wifi testing tools binaries like aircrack-ng(Not needed for Nethunter only for test tools direct from android without Nethunter)
DriveDroid without bugs made by disabling HID Patch:
To disable HID Patch: use this command in terminal: "echo Y > /sys/module/g_android/parameters/hid_disable"
Changing mode isn't instant after changing module status. Use DriveDroid (mount iso -> dismount) to active hid_disable.
To enable HID Patch: "echo N > /sys/module/g_android/parameters/hid_disable" and use DriveDroid like with disabling HID Patch.
HIDPatchSwitch this is simple script which can switch between HID enabled and disabled and show changed status.
If you need LineageOS 15.1 kernel version is too available as version 0.1 in downloads.
XDA:DevDB Information
[KERNEL] [G930F] Nethunter for LineageOS 16.0 ROM, Kernel for the Samsung Galaxy S7
Contributors
Svirusx
Source Code: https://github.com/Svirusx/Nethunter-s7-kernel-LineageOS16.0
Kernel Special Features:
Version Information
Status: Stable
Created 2019-04-14
Last Updated 2019-11-06
CHANGELOG
2019-09-15 - v1.3
Update to kernel source to 10.09.2019.
2019-06-11 - v1.2
Update kernel source to 09.06.2019.
2019-05-14 - v1.1
Update kernel source to 12.05.2019.
2019-04-14 - v1.0
Initial release
Reserved
Hey, great job porting this! Do you know if it is possible to enable monitor mode on this kernel? It seems to be possible on you lineage 14 one. I think i have the bcm4359.
Jack_Rickwood said:
Hey, great job porting this! Do you know if it is possible to enable monitor mode on this kernel? It seems to be possible on you lineage 14 one. I think i have the bcm4359.
Click to expand...
Click to collapse
No is not possible to enable monitor mode with bcm4359 on Lineage 16, only with compatible usb cards. In LineageOS 14 is that possible because of modded wifi driver. This driver works only with LineageOS 14 but it is bugged. If you capture packets with this driver all of they are malformed and unusable for further testing, only packet injection works fine.
You can try Dualboot patcher and have two version of LineageOS.
Ah, ok, thx
Is there anyway to broadcast 5G hotspot with this phone? I've tried using create_ap in a chroot debian, and it didn't work at all
deorth said:
Is there anyway to broadcast 5G hotspot with this phone? I've tried using create_ap in a chroot debian, and it didn't work at all
Click to expand...
Click to collapse
Galaxy s7 doesn't support 5G. I don't think if you can use USB 5G adapter to make hotspot. Android haven't much drivers included in kernel.
Svirusx said:
Galaxy s7 doesn't support 5G. I don't think if you can use USB 5G adapter to make hotspot. Android haven't much drivers included in kernel.
Click to expand...
Click to collapse
Is this kernel compatible with other aosp roms?
alanifotis said:
Is this kernel compatible with other aosp roms?
Click to expand...
Click to collapse
It is compatible with all custom roms which kernel is based ivanmeler LineageOS 16.0 source. Of course BACKUP before trying flash.
Svirusx said:
It is compatible with all custom roms which kernel is based ivanmeler LineageOS 16.0 source. Of course BACKUP before trying flash.
Click to expand...
Click to collapse
Ok thanks
Svirusx said:
Galaxy s7 doesn't support 5G. I don't think if you can use USB 5G adapter to make hotspot. Android haven't much drivers included in kernel.
Click to expand...
Click to collapse
sorry if my words wasn't clear, for I'm not a native speaker. I meant 5GHz wifi hotspot (802.11ac), not the next generation mobile network.
deorth said:
sorry if my words wasn't clear, for I'm not a native speaker. I meant 5GHz wifi hotspot (802.11ac), not the next generation mobile network.
Click to expand...
Click to collapse
Build in wifi card isn't much compatible with chroot. I don't think if it's possible.
Svirusx said:
Build in wifi card isn't much compatible with chroot. I don't think if it's possible.
Click to expand...
Click to collapse
ok, I guess I'll use 2.4G then. Thank you for the reply.
@Svirusx
Wich files should i download from kalifs repository?
kalifs-armhf-minimal.tar.xz or kalifs-armhf-full.tar.xz
And where can i fund utilities and nethunter apk link seems broken
alanifotis said:
@Svirusx
Wich files should i download from kalifs repository?
Click to expand...
Click to collapse
kalifs-armhf-full.tar.xz or kalifs-armhf-minimal.tar.xz
If you download minimal you can further install metapackages in chroot.
This depends for what you want use Kali Linux in chroot look at metapackages.
Svirusx said:
kalifs-armhf-full.tar.xz or kalifs-armhf-minimal.tar.xz
If you download minimal you can further install metapackages in chroot.
This depends for what you want use Kali Linux in chroot look at metapackages.
Click to expand...
Click to collapse
What about utilities.7z and nethunter apk? Where can i download them
alanifotis said:
What about utilities.7z and nethunter apk? Where can i download them
Click to expand...
Click to collapse
I updated first page you can get more info from it.
utilities.7z are near first version of Nethunter kernel and now direct link is too in first page.
Svirusx said:
I updated first page you can get more info from it.
utilities.7z are near first version of Nethunter kernel and now direct link is too in first page.
Click to expand...
Click to collapse
Thank you very much man :laugh:
I managed to install kalinethunter and full chroot,but when i open kali terminal it runs some commands quickly and closes,any help?