ATTENTION!
Code:
[COLOR="red"]!!! I AM NOT RESPONSIBLE FOR ANY POSSIBLE DAMAGE DONE TO YOUR DEVICE AS A RESULT OF FLASHING AND I AM NOT RESPONSIBLE FOR ANY BRICKED PHONES OR LOST DATA! FLASH AT OWN RISK !!![/COLOR]
Introduction
This ROM was created for personal use. It was compiled from last sources with some personal changes and bug fixes. It's based on Lord Boeffla's kernel for LineageOS 15.1 ROM with all Kali NetHunter features included. Unfortunately Lord Boeffla stopped developing for Android so it's possibly the last available kernel from him. This ROM was tested on OnePlus 3T LineageOS 15.1 clean installed ROM with NanoDroid microG and MagiskSU.
Click to expand...
Click to collapse
Features
based on boeffla kernel with config app features support
mac80211 packet injection
usb hid
SYSTEM V support for PostgreSQL & msfconsole functionality
usb bluetooth
usb dongle modem support
modprobe support
built-in drivers for Ralink RT3070I & RTL8192CU chipsets
usb dvb- & radio-receivers support
NetHunter app with last changes & fixes
drive droid v.1.38 (older version) with cd-rom & usb-rw support
binkybear-terminal with notification bar support
other NetHunter's features
Installation instructions
Boot to TWRP recovery.
Flash the nethunter-oneplus3T-los-oreo-kalifs-full.zip
Reboot to system.
Run NetHunter App and apply all requirements & give it root privileges.
Launch DB Feed in SearchSploit section to initialize the exploits db.
Launch Android Terminal & give it root privileges.
Run 'apt update && apt dist-upgrade -y' command to get the latest updates.
Launch other apps to set them up.
Special installation instructions
There are some "issues" I've discovered during the compiling and installation. I don't know if they are general or just specific one and depends on using NanoDroid microG and MagiskSU. But as it is.
1. All apps removes from /data/app/ after ROM installation complete and I have to manually install them to make everything works. So I've attached all apps in the Download section if anybody will face the same issue.
P.S. This issue was fixed in last commits from kali-nethunter git. So I've recompiled it from sources and added to nethunter installer. But haven't tested.
2. After the first clean installation of NetHunter with built in kernel Boeffla Config App can't sometimes to initialize the kernel. In this case you should boot to TWRP recovery and flash standalone kernel's zip. After that everything should work's great.
Downloads
Downloads:
NetHunter Full ROM Installer
NetHunter's Apps
Boeffla-LOS-15.1-NH-Kernel
Sources:
kali-nethunter
nethunter-devices
nethunter-app
boeffla-kernel-los-nethunter-oneplus3T
Thanks to/Credits
Code:
[URL="https://www.boeffla.de/"]Lord Boeffla[/URL]
[URL="https://www.offensive-security.com/"]Offensive Security[/URL]
[URL="https://lineageos.org/"]LineageOS[/URL]
[URL="https://github.com/binkybear"]BinkyBear[/URL]
[URL="https://github.com/pelya"]pelya[/URL]
[URL="https://github.com/Re4son"]Re4son[/URL]
[URL="https://github.com/kimocoder"]kimocoder[/URL]
XDA:DevDB Information
OnePlus3T LineageOS 15.1 NetHunter, ROM for the OnePlus 3T
Contributors
flypatriot
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: LineageOS 15.1
Version Information
Status: Testing
Created 2019-04-05
Last Updated 2019-04-11
Reserved
Changes at 2019.04.05:
Replaced NetHunter App with last build from Re4son.
Removed modprobe_fix script and how-to-use-it section from installation guide. We don't need it anymore (all thank's to Re4son).
Rebuild NetHunter installer with new App.
Changes at 2019.04.11:
Fixed bluetooth doesn't power on issue.
Added new compiled chroot with last fixes and updates.
Fixed issue with app's installation in android oreo.
thanks for share :good:
Does the monitor mode work without an external antenna?
jorge705 said:
thanks for share :good:
Does the monitor mode work without an external antenna?
Click to expand...
Click to collapse
No. I was searching a lot of time for custom firmware with monitor mode and packet injection support for QCA6174 model but there is nothing at the moment. So you should use external adapters from recommendation list in official Kali wiki.
It would be pretty neat, if the rom would run on the Oneplus 3 as well... :x
UsPdSr said:
It would be pretty neat, if the rom would run on the Oneplus 3 as well... :x
Click to expand...
Click to collapse
I was thinking about 3 model in the beginning of developing but the thing is I can't publish untested roms. And I don't have a OnePlus 3 model to test everything by myself. But if you want I can compile it just for you. But I can't give you any guarantees.
It would be greatly appreciated if you could compile it for op3 pie, thanks anyway:good:
DoN LoUhI said:
It would be greatly appreciated if you could compile it for op3 pie, thanks anyway:good:
Click to expand...
Click to collapse
You can check Havoc based kernel published here https://forum.xda-developers.com/on...nel-kali-nethunter-oneplus-3t-t3507816/page27 (see last comments from MrM0NS73R).
flypatriot said:
You can check Havoc based kernel published here https://forum.xda-developers.com/on...nel-kali-nethunter-oneplus-3t-t3507816/page27 (see last comments from MrM0NS73R).
Click to expand...
Click to collapse
Thanks man, I would hope finding one for stock oos pie. any suggestions ?!
DoN LoUhI said:
Thanks man, I would hope finding one for stock oos pie. any suggestions ?!
Click to expand...
Click to collapse
Take a look to ZaneZam's threads. I'm sure he's already made some builds. I've been using his kernels earlier and they were really great.
flypatriot said:
I was thinking about 3 model in the beginning of developing but the thing is I can't publish untested roms. And I don't have a OnePlus 3 model to test everything by myself. But if you want I can compile it just for you. But I can't give you any guarantees.
Click to expand...
Click to collapse
I would gladly be the tester if you don't mind the additional work.
We could talk this over Pm or another messaging app if you prefer.
Also congrats to the the successful implementation of your work in the Nethunter repository!
it is compatible with my RTL8188EU ?
flypatriot said:
Take a look to ZaneZam's threads. I'm sure he's already made some builds. I've been using his kernels earlier and they were really great.
Click to expand...
Click to collapse
That great man, I've been using his kernel too on oos Oreo and it was awesome. I hope he would make a build for stock pie as well.
[TWRP]
Failed to install Kali Nethunter!
Updater process ended with ERROR: 1
why?
net hunter
What OS/Kernel/packages combo is neded to get it to work on the 1+3T ?
You have to to make sure you magisks is working or super su before you flash the kalinethuner zip. i had the same problem
i got kalinethunter running with chroot installed but i dont have the nethunter terminal anyone else got a fix for this ?
Can i Flash Nethunter Kernal for OnePlus 3T nougat to OnePlus 3T Android pie? if no then how to get Nethunter kernal for OnePlus 3T Android 9 pie ?
please explain
without any rom installed this Nethunter Rom is not being install, while Having Havoc 2.xx installed this rom is got installed but issues.
is it important to install this rom over other Rom?
is it compatable with Havoc 2.6?
flypatriot said:
No. I was searching a lot of time for custom firmware with monitor mode and packet injection support for QCA6174 model but there is nothing at the moment. So you should use external adapters from recommendation list in official Kali wiki.
Click to expand...
Click to collapse
can you try this tutorial? pls :crying:
https://github.com/The-Cracker-Tech...ki/How-to-enable-monitor-mode-in-all-devices?
DoN LoUhI said:
Thanks man, I would hope finding one for stock oos pie. any suggestions ?!
Click to expand...
Click to collapse
flypatriot said:
Take a look to ZaneZam's threads. I'm sure he's already made some builds. I've been using his kernels earlier and they were really great.
Click to expand...
Click to collapse
See the last post in this thread.. it's stock 9.0.3 kernel with WiFi adapter drivers and other nethunter features.
https://forum.xda-developers.com/oneplus-3/development/kernel-coconut-kernel-oos-oreo5-x-x-t3902040
Related
Introduction
Sailfish OS is a mobile operating system combining the Linux kernel for a particular hardware platform use, the open-source Mer core middleware, a proprietary UI contributed by Jolla, and other third-party components.
Click to expand...
Click to collapse
This is a port of Sailfish OS to cancro (Xiaomi Mi3/Mi4), based on CyanogenMod 12.1.
What Works: https://wiki.merproject.org/wiki/Adaptations/libhybris#Smartphones (Check Xiaomi Mi3)
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Whats new:
Updated to Sailfish 2.1.3.7
Click to expand...
Click to collapse
Known issues:
1) Wifi mac address not detected properly
Click to expand...
Click to collapse
Current TODOs: Sailfish OS on cancro's Trello Board
Download links:
Cyanogenmod 12.1 base: https://www.androidfilehost.com/?fid=529152257862691291 (Mirroring this, as CM servers are shutting down)
Sailfish OS rootfs: https://www.androidfilehost.com/?fid=817906626617953262
Click to expand...
Click to collapse
Installation Instructions:
NOTE: This release is also available as an OTA to existing users.
1) Make sure your device has the new partition layout needed for Android M and a custom recovery. Boot to Recovery, wipe cache, dalvik-cache, system and data. ( https://jrizzoli.github.io/dotfiles/ )
2) First install cm-12.1-20151117-SNAPSHOT-YOG7DAO1K6-cancro.zip As your base ROM, and make sure it works well.
3) Then Install sailfishos-cancro-release-2.1.3.7-beta.zip on top of it. This will replace your boot image with sailfish boot image, and installs sailfish os to /data/.stowaways/sailfishos . The installation can take a little while, so be patient.
If you are already running, CM12.1 YOG7D/already have SailfishOS installed, you can simply flash the Sailfish OS without wiping flash/partition.
Click to expand...
Click to collapse
Big kudos to @mixmoto and Nokius, for patiently testing this release over and over.
P.S Thank you all for your support. I really really appreciate it - and it's what motivated me to make some time in my busy days to create this release. Wish you all Happy Holidays!
XDA:DevDB Information
Sailfish OS for cancro, ROM for the Xiaomi Mi 3
Contributors
saidinesh5, Ar4er, Folks at #sailfishos-porters, especially @mal-
Source Code: https://github.com/CancroSailors
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Must have CM12.1-YOG7D
Based On: CyanogenMod 12.1-YOG7D
Version Information
Status: Alpha
Created 2016-09-15
Last Updated 2018-01-07
Hey Dinesh,
Thanks for your work,
does this have sfdroid support?
Ekril said:
Hey Dinesh,
Thanks for your work,
does this have sfdroid support?
Click to expand...
Click to collapse
Hey, Nope. SFDroid support is on my TODO list for now.
It may take a while though. I need a Multirom working with CM13.0(which is my primary ROM), so I can safely port all the needed changes for SFDroid to my CM12.1 base without losing all my data. Any help welcome here!
Cheers
saidinesh5 said:
Hey, Nope. SFDroid support is on my TODO list for now.
It may take a while though. I need a Multirom working with CM13.0(which is my primary ROM), so I can safely port all the needed changes for SFDroid to my CM12.1 base without losing all my data. Any help welcome here!
Cheers
Click to expand...
Click to collapse
Thank you!!! this is awesome!!
Almost everything it seems to be working :good:
Is it stable for daily use?
Rocketval said:
Thank you!!! this is awesome!!
Almost everything it seems to be working :good:
Is it stable for daily use?
Click to expand...
Click to collapse
Great!
Right now i don't think it's ready for daily use yet, as sometimes my device's sensors and audio stop working randomly. Not sure if it is just my device though (because of some weird hacks I've been using).
I suspect this maybe because the CM 12.1 zip i was using to boot differs from the sources I've used to compile this rom. Once that issue is fixed, i think this will be usable for daily use. Camera works, Browser works, basic apps work.. And compiling that cm 12.1 means even sfdroid will work ...
saidinesh5 said:
Great!
Right now i don't think it's ready for daily use yet, as sometimes my device's sensors and audio stop working randomly. Not sure if it is just my device though (because of some weird hacks I've been using).
I suspect this maybe because the CM 12.1 zip i was using to boot differs from the sources I've used to compile this rom. Once that issue is fixed, i think this will be usable for daily use. Camera works, Browser works, basic apps work.. And compiling that cm 12.1 means even sfdroid will work ...
Click to expand...
Click to collapse
For what I know only few cm12 builds worked fine when flashed before sfos..
Maybe you need another build.. I don't know..
Rocketval said:
For what I know only few cm12 builds worked fine when flashed before sfos..
Maybe you need another build.. I don't know..
Click to expand...
Click to collapse
Could be. Most bugs i had to fix last week were because of differing versions too. That's why I'm trying to compile a cm12.1 right now.
Also right now as I'm on CM13.0, i was just using a system.img from the CM12.1.zip.. And making sailfish loop Mount that as the actual /system/ . not sure if that's causing any issues.
Right now my options are port multirom to CM13.0 (having some weird errors there) or wipe my device clean and downgrade to CM12.1 (have been trying to avoid this for months now!).
saidinesh5 said:
Could be. Most bugs i had to fix last week were because of differing versions too. That's why I'm trying to compile a cm12.1 right now.
Also right now as I'm on CM13.0, i was just using a system.img from the CM12.1.zip.. And making sailfish loop Mount that as the actual /system/ . not sure if that's causing any issues.
Right now my options are port multirom to CM13.0 (having some weird errors there) or wipe my device clean and downgrade to CM12.1 (have been trying to avoid this for months now!).
Click to expand...
Click to collapse
Yeah, we definetely need multirom, with 64gb mi4w I have more than 32+ free and a lot of will to try
Thank bro
Thank you!!!
As a temporary fix for radio, pulseaudio could be restarted, NOT as root.
Code:
systemctl restart pulseaudio --user
adeen-s said:
As a temporary fix for radio, pulseaudio could be restarted, NOT as root.
Code:
systemctl restart pulseaudio --user
Click to expand...
Click to collapse
I currently use this command everytime i wanted the FM radio to work. I will have to look into why this is failing by default though
Code:
$pactl set-source-port source.primary input-fm_rx
i cant undersatand for what need to flash cm-12.1? I cant flash clean sailfish.zip?
UPD can i flash gapps and supersu?
Dr. Ramm said:
i cant undersatand for what need to flash cm-12.1? I cant flash clean sailfish.zip?
UPD can i flash gapps and supersu?
Click to expand...
Click to collapse
this isn't android, you cannt flash gapp
Dr. Ramm said:
i cant undersatand for what need to flash cm-12.1? I cant flash clean sailfish.zip?
UPD can i flash gapps and supersu?
Click to expand...
Click to collapse
Due to legal reasons, Sailfish OS doesn't bundle the proprietary blobs(device drivers, system libraries etc..) provided by the phone vendors in it's zip.
As I have compiled Sailfish OS using sources from CM-12.1, it tries to access these proprietary files on your device via. CM-12.1 libraries. That's why you have to flash a CM-12.1 zip first, before flashing Sailfish OS. (i.e just clean flashing sailfish.zip won't work)
As of now, you don't have to flash gapps, as there is no way to use them from Sailfish OS. Once we get sfdroid running, we can run Android apps from within Sailfish OS, then you can flash gapps if you want.
Sailfish OS already comes with an su binary (accessed via. devel-su command) and full root access. So, you won't need Super SU.
saidinesh5 said:
As I have compiled Sailfish OS using sources from CM-12.1, it tries to access these proprietary files on your device via. CM-12.1 libraries. That's why you have to flash a CM-12.1 zip first, before flashing Sailfish OS. (i.e just clean flashing sailfish.zip won't work)
Click to expand...
Click to collapse
got it
saidinesh5 said:
As of now, you don't have to flash gapps, as there is no way to use them from Sailfish OS. Once we get sfdroid running, we can run Android apps from within Sailfish OS, then you can flash gapps if you want.
Click to expand...
Click to collapse
Stock market not working (as u say in 1st post) but how i can install some apps?
saidinesh5 said:
Sailfish OS already comes with an su binary (accessed via. devel-su command) and full root access. So, you won't need Super SU.
Click to expand...
Click to collapse
nice
run very smooth on my mi3
Dr. Ramm said:
got it
Stock market not working (as u say in 1st post) but how i can install some apps?
nice
Click to expand...
Click to collapse
You can use https://openrepos.net/content/basil/warehouse-sailfishos app to install apps.. I will include this in the zip for the next build (Which will soon be available).
First enable installation of untrusted software in Settings, then download the latest rpm of that from your browser and install it.
saidinesh5 said:
You can use https://openrepos.net/content/basil/warehouse-sailfishos app to install apps.. I will include this in the zip for the next build (Which will soon be available).
First enable installation of untrusted software in Settings, then download the latest rpm of that from your browser and install it.
Click to expand...
Click to collapse
can u tll me where located screenshots and how i can upload it on pc
some screens is here
after turn off mi3 10s, i dont turn on device
What is Kali NetHunter?If you don't know what NetHunter is read this: https://www.kali.org/kali-linux-nethunter/
Q: Why don't I flash the original nethunter version by keeping my current kernel?
A: To get Nethunter fully work you need a kernel that supports its features, such as put a wireless adapter in monitor mode or perform a HID Keyboard attack
Special Patches included in this kernel:
mac80211 injection patch, to put wireless adapters in monitor mode; note that built-in wireless chipset doesn't support monitor mode and you have to use external wireless adapter (see supported wireless cards here)
HID patch, to perform HID keyboard attacks
CD-ROM patch, to emulate CD-ROMs in DriveDroid
Warning!!!:
This version is not tested by me (since I don't have a hono 5x ) but it's tested by another user that told me it works, so, if it doesn't blame him not me
Disclaimer:
Code:
I'm not responsable for bricked devices :( , dead phone chargers,
nuclear explosions or global warming.
Flash it at YOUR OWN RISK.
Required Downloads:
Download any CM based ROM
Download any custom recovery (like twrp)
Download my Nethunter "ROM" here: https://androidfilehost.com/?w=files&flid=118871 All future updates will be in that folder
How to Install (CM/RR):
Note: When you flash my zips, don't check "zip signature verification" box in TWRP recovery
1) Install TWRP
2) Enter in TWRP recovery
3) Flash any CM based (like cm, rr, aicp...) ROM
4) Optional: flash Google Apps after flashed a cm based recovery
5) Flash NetHunter zip
7) Reboot
8) Open Nethunter app and go to menu<chroot manager<install chroot and download the full chroot, for devices which have more storage available, or minimal chroot, for devices which have less space available
9) Close NetHunter app and reopen it to complete the installation
10) Enjoy
Important: I called NetHunter "ROM", but it isn't a ROM, so, you don't have to wipe system partition.
Note: report only bugs related to NetHunter and not to cm based roms
Kernel Source Code:
https://github.com/DeadSquirrel01/android_kernel_huawei_kiwi branch cm-13.0
Now you can build it by youself on official HetHunter source page
You Need this https://github.com/offensive-security/kali-NetHunter
and this https://github.com/offensive-security/nethunter-devices (branch experimental for now )
For Any questions contact me at: [email protected]
Credits: @jcadduono, binkybear and offensive security team for NetHunter source code
XDA:DevDB Information
[MOD] Kali NetHunter for Honor 5x, Kernel for the Honor 5X
Contributors
DeadSquirrel01
Kernel Special Features: mac80211 Packet Injection Patch, HID gadget USB/Mouse Patch, CD-ROM Patch for emulate CD-ROMS in DriveDroid
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2016-10-01
Created 2016-10-01
Last Updated 2016-10-01
already using it NYC work
Will someone explain what this does?? I tried the link but couldn't get much out of it.... Thnx
Sent from my KIW-L21 using Tapatalk
Faheemarif252 said:
Will someone explain what this does?? I tried the link but couldn't get much out of it.... Thnx
Click to expand...
Click to collapse
Well, Mate its actually used for pentesting or penetration testing of wifi or wireless networks... google it for detail information.
mumith3 said:
Well, Mate its actually used for pentesting or penetration testing of wifi or wireless networks... google it for detail information.
Click to expand...
Click to collapse
Yep, it's for pentesting
it is a amazing kernel, wow.
kaankulahli said:
it is a amazing kernel, wow.
Click to expand...
Click to collapse
I know
Gonna try it
Kali Linux on Honor 5X! This is amazing!
Downloaded and flashed on KIW-L22 - On Tipsy OS - AOSP and AOKP (CM Based) - Initial boot took a while longer than normal, got a boot loop first, but it came back up after cache/dalvik wipe
Kali chroot manager stuck in "Checking" even after 10 minutes though
Edit: Lost root on installing this and didn't notice it, and busybox too.....reinstalling SuperSU through TWRP is not bringing it back root access either, so cannot install busybox too......nethunter app returned an error for not getting root access and no busybox installation!
PS: In love with the boot animation!!
nandakalyan said:
Downloaded and flashed on KIW-L22 - Kali chroot manager stuck in "Checking" even after 10 minutes though
1. On Tipsy OS - AOSP - working fine! Initial boot took a while longer than normal, got a boot loop first, but it came back up after cache/dalvik wipe
2. On AOKP (CM based) - Flash and wipe cache/dlavik, took a while longer but booted up normally, but I guess it will settle
Still trying to figure out how and what to use it for but just wanted to report back that the flashing process went well!!
PS: In love with the boot animation!!
Click to expand...
Click to collapse
mmm, stucking in checking it's very strange. Maybe compile a full zip here https://github.com/offensive-security/kali-nethunter (you have to clone
https://github.com/offensive-security/nethunter-devices, too (branch experimental) then for build with full chroot, just type:
$ python build.py -d kiwi --marshmallow --release v1.0 --rootfs-full
Anyway i will upload the zip with full chroot once i finish my cm14 port for a5
DeadSquirrel01 said:
mmm, stucking in checking it's very strange. Maybe compile a full zip here https://github.com/offensive-security/kali-nethunter (you have to clone
https://github.com/offensive-security/nethunter-devices, too (branch experimental) then for build with full chroot, just type:
$ python build.py -d kiwi --marshmallow --release v1.0 --rootfs-full
Anyway i will upload the zip with full chroot once i finish my cm14 port for a5
Click to expand...
Click to collapse
Thanks man, I wish I knew enough to compile and run things on github just edited by previous post.....it seems it got stuck because of no root access and busybox missing. Lemme know if i can test things out for you, glad to be of any help that way!
---------- Post added at 07:52 PM ---------- Previous post was at 07:12 PM ----------
OK, just figured it was me being a bit duh on the whole thing! I just reinstalled the whole ROM, and flashed this again. Installed SuperSU from playstore (it went missing after installing this) and things are back to normal.....now downloading full chroot! Hurray!
[/COLOR]OK, just figured it was me being a bit duh on the whole thing! I just reinstalled the whole ROM, and flashed this again. Installed SuperSU from playstore (it went missing after installing this) and things are back to normal.....now downloading full chroot! Hurray![/QUOTE]
Strange, the zip should include SuperSU
Hi,
where can I find the full chroot file (~ 750Mo), I want to download it manually
+
Why "wifite" does not recognize my hama adapter with Ralink RT2500 chipset?!
It is identified but when I choose the interface, it still returns the menu of choice
thanks for your help
panther2005 said:
Hi,
where can I find the full chroot file (~ 750Mo), I want to download it manually
+
Why "wifite" does not recognize my hama adapter with Ralink RT2500 chipset?!
It is identified but when I choose the interface, it still returns the menu of choice
thanks for your help
Click to expand...
Click to collapse
You can download chroot here:
https://build.nethunter.com/kalifs/
Regarding your adapter, read this: https://github.com/offensive-security/kali-nethunter/wiki/Wireless-Cards
Unlucky, your adapter does not support nethunter
DeadSquirrel01 said:
You can download chroot here:
https://build.nethunter.com/kalifs/
Regarding your adapter, read this: https://github.com/offensive-security/kali-nethunter/wiki/Wireless-Cards
Unlucky, your adapter does not support nethunter
Click to expand...
Click to collapse
Thanks bro
I even tried the alfa rtl8187l chipset without any result,
The problem is the low current for the adapter from the phone,
The usb hub with an external power supply maybe solves the problem, but it is not practical for a displacement
thanks again DeadSquirrel01
Sent from my KIW-L21 using XDA-Developers mobile app
panther2005 said:
Thanks bro
I even tried the alfa rtl8187l chipset without any result,
The problem is the low current for the adapter from the phone,
The usb hub with an external power supply maybe solves the problem, but it is not practical for a displacement
thanks again DeadSquirrel01
Sent from my KIW-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
For this i dunno, i'm not an elctronic expert ^^
DeadSquirrel01 said:
For this i dunno, i'm not an elctronic expert ^^
Click to expand...
Click to collapse
I must choose
kalifs-armhf-full.log
kalifs-armhf-full.sha512sum
kalifs-armhf-full.tar.xz
for KIW-L21?
panther2005 said:
I must choose
kalifs-armhf-full.log
kalifs-armhf-full.sha512sum
kalifs-armhf-full.tar.xz
for KIW-L21?
Click to expand...
Click to collapse
The .tar.xz one
Hey all,
so i flashed the nethunter zip with no hiccups.
However, now my wifi wont connect.
Does anyone know what might be the problem?
OmniROM
[#KITKAT]
for Samsung Galaxy Nexus (Unified)
[#WHATSOMNI]
[#WARRANTY]
Downloads:
[#DLGITHUBIO]
[#INFOOMNI]
Specials added on top of Official OmniRom Source
All in One Animation Control
Battery Saver mode
On-The-Go mode
Implement App circle sidebar
follow dark 4.4 UI
Those features have never been ready for official Omni, but people spend a lot of time writing those features and i really like those.
I am trying to release an security update monthly after google publish android security bulletins.
Support development
[#DONATETOME]
XDA:DevDB Information
[unified][4.4.4] OmniROM, ROM for the Samsung Galaxy Nexus
Contributors
Android-Andi, Ziyan
Source Code: https://github.com/omni-security
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Version Information
Status: Stable
Current Stable Version: Final Build availabl
Created 2017-08-12
Last Updated 2017-08-18
Hello everyone, first of all, great work @Android-Andi thank you to take the time to support our old device !
And then sorry for my noob questions but :
- I didn't quite understand the difference between device specific and unified builds and I don't want to make a mistake flashing the wrong one.
- What is the main difference between Omni 4.4, Omni 6.0 or Slim 6.0? I want to use one of those but I don't know which one I think Omni 4.4 is the closest from what I had with the official Jelly Bean ROM and the 2 others are optimized version of Marshmallow. And is Slim 6.0 faster than Omni 6.0?
Thank you again
Radder124 said:
I didn't quite understand the difference between device specific and unified builds and I don't want to make a mistake flashing the wrong one.
Click to expand...
Click to collapse
Unified builts are for all types of tuna: Maguro, Toro, Toro+. When booting only the needed (device specific) drivers are loaded, but the drivers fir all supported devices are on board...
Unified works on all tuna variants: maguro, toro and toroplus at same time. It detects your variant on first boot and places needed files. That's the one I'll compile in future too.
Which rom is the best? Use the power of your TWRP and try it out. Test one, check if it fits your needs. If not, make a backup and try a different rom.
Android-Andi said:
Which rom is the best? Use the power of your TWRP and try it out. Test one, check if it fits your needs. If not, make a backup and try a different rom.
Click to expand...
Click to collapse
I can ask you a different question With all the new ROMs, I don't know which ROM you would like to receive bug reports from. Crash logs, etc. I know there is no point giving you CM12.1 crash logs. Which ROM would you like us testing and reporting bugs from?
Thank you for providing this ROM! I finally found a ROM with a working camera for the Gnex with security patches (from 2017-07).
...anyone gotten Xposed Framework installed/working with this? Halp
JLsoft said:
...anyone gotten Xposed Framework installed/working with this? Halp
Click to expand...
Click to collapse
There's somewhere an updated version flying around on XDA, maybe you'll find it (i don't have it anymore)
JLsoft said:
...anyone gotten Xposed Framework installed/working with this? Halp
Click to expand...
Click to collapse
try this
@Android-Andi is it possible to use this ROM with F2FS file system? Which DDK version is included in this ROM? Thank you for your contribution.
Those who are on 4.4:
AOSP Browser was removed for security reasons. Most lightweight Browser use KitKats webview which isn't up to date any more and there's ATM no proper way to update it.
You should use a browser which has its own webview implementation like Chrome, Firefox or Chromium.
From what I have tested Chromium seems to be a good solution. Here's my self compiled Chromium:
https://github.com/andi34/prebuilt_chromium/raw/master/ChromePublic.apk
(It's only missing h264 encoder for legal reasons...H.264 is not a free codec and I don't have the license for distributing)
For Android 5+
https://github.com/andi34/prebuilt_chromium/raw/master/ChromeModernPublic.apk
For Android 7+
https://github.com/andi34/prebuilt_chromium/raw/master/MonochromePublic.apk
New builds are up.
Switched to default libion, thx to @Ziyan and @amaces !
Note: don't flash any custom kernel on this build (also AnyKernel isn't compatible ATM)!
I've been away from the scene for a while so please catch me up. Does this rom bypass carrier limitations when using usb tether?
madspeed said:
I've been away from the scene for a while so please catch me up. Does this rom bypass carrier limitations when using usb tether?
Click to expand...
Click to collapse
Yep, these custom ROMs have nothing to do with carriers
March update is online. Enjoy!
Dear developer,
firstable many thanks for your Rom
I was using OMNI 4.4.4 dated 2015 but I was living issue with GMAIL, HANGOUT and GDRIVE
Today I discovered your product and Installed it on my MAGURO with a clean installation
Unfortunately after few hours I am suffering reboot
The system boots well but after few seconds it reboots itself ... continuosly ...
I am using omni_tuna-4.4.4-20180311-1556
I used GAPPS open_gapps-arm-4.4-pico-20180427
I rooted with SUperSU 2.82 R5
I tried to wipe cache, dalvik-cache, system and reinstall the rom and the gapps wo success
I tried to remove root wo success
HAve you some idea to help me ?
Thanks
Paolo
[EDIT]
I wiped all (clean installation) and installed the older version of rom (omni_tuna-4.4.4-20180128-0005)
[I noted that this version is bigger than the newer of around 30MB ...)
Same GAPPS af above
Same root of above
It runs well now ... cross the fingers and stay tuned
People having issues on latest build could try https://forum.xda-developers.com/showpost.php?p=76429699&postcount=188
The request from root was one of my suspect
Do you suggest to flash new kernel after last updated ROM, gapps and root and so before the first boot ?
Do you confirm that this workaround is not necessary with the previous version ?
Are you able to identify which version needs and which didn't ?
For instance I am using the January version .... Did I need to flash new kernel ?
Inviato dal mio Galaxy Nexus utilizzando Tapatalk
It could be it's needed on all KK roms since end of last year. But only works for latest builds using default libion.
Android-Andi said:
It could be it's needed on all KK roms since end of last year. But only works for latest builds using default libion.
Click to expand...
Click to collapse
Excuse my noob ... What does it mean default libion ?
Inviato dal mio Galaxy Nexus utilizzando Tapatalk
Hey there,
good news for everyone who is missing the great JDC Nougat!
With smeroni68's authorization I'm offering you the latest version of the ROM, built from source, with some changes to keeping it up to date and maintained.
These changes are:
Latest security bulletins and changes from AOSPKernel upstreams from Linux StableUpdates from Code Aurora Forum (CAF)Some smallish modifications of standard apps or behavior
All credit goes to the JDC team!
(Check attachment for a list of team members).
They are the geniuses behind this awesome ROM and kernel, and I'm only making basic and minor modifications to it.
Besides a huge thanks to each member of the JDC team, thanks to Google, Lineage, Linux, CAF, Github & everyone else involved!
And many thanks also to DennySPB who helped me a lot with all the building stuff!
Have fun and enjoy!
Downloads
ROM / Kernel
Hashes
Recommended firmware
Last and latest Oreo firmware for our Mi 5:
8.11.22
ROM installation
Install latest TWRP
Make backups and store them externally
Wipe dalvik, cache, system, vendor, data
When coming from any android version other than Nougat 7.1.2:
Make external backups of your internal storage content
Format data (type "yes" way)
Reboot to recovery to access the data partition correctly again
Flash adequate firmware
No reboot in between the following and the optional steps
Flash ROM
Optionally:
Flash Gapps for 7.1.x arm64. I recommend OpenGapps Pico with additions (1) OR Stock with gapps-config.txt file (2):
(1) Flash Gapps additions (for example these by @Deltadroid)
(2) Check post_#128
Flash ThemeReady GApps package for Nougat arm64 (I don't)
Flash root (Latest Magisk is working fine for me)
After the first boot
Follow the gapps assistant (in case you installed gapps)
Wait 2 - 5 minutes to let everything settle in
Reboot to system
Kernel installation
You'll only wanna install the kernel separately when there's a kernel-only update later than the last ROM version!
Wipe dalvik and cache
Flash the kernel zip-file
Optionally: Re-flash root (if you were rooted before or now wanna be rooted)
GPL
All repos are forked from AOSP-JF-MM or LineageOS
Device tree source code:
https://github.com/PhilSmith31/platform_device_xiaomi_gemini/tree/aosp-7.1.2_r36
Kernel source code:
https://github.com/PhilSmith31/platform_kernel_xiaomi_msm8996/tree/bb
XDA:DevDB Information
AOSP, ROM for the Xiaomi Mi 5
Contributors
Phil_Smith
Source Code: https://github.com/PhilSmith31
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: 8.1.18
Based On: AOSP
Version Information
Status: Stable
Created 2018-08-28
Last Updated 2020-03-20
Changelogs
20.03.2020
March 2020 security updates from LineageOS
Synced Lineage repos
Kernel is up to date with relevant commits to android/common
02.03.2020
Security bulletins up to Februrary 2020 (no more source.android updates coming from here on)
Updated everything in aosp.xml to latest android tag r39
Updated HALs and all externals under CAF to tag LA.UM.5.5.c25-04600-8x96.0
Upstreamed kernel with all changes to android/common up to date
Merged LA.UM.5.5.c25-04600-8x96.0 into qcacld-2.0
Synced Lineage repos
Kicked opencv
Kernel compiled with latest Linaro toolchain 7.5.0
17.09.2019
ROM:
Security updates from August and September 2019
Merged in CAF tag LA.UM.5.5.c25-03100-8x96.0 into externals, hals, and some vendors
Synced system/gatekeeper with LOS
Kernel:
B--B-Kernel-N-[2019-09-17]-[20:17]-Mi5
From now on always also present in kernel_only folder
Cherry-picked all relevant aosp's kernel/common/android-3.18 commits up to date
Merged in security related changes from aosp
Merged CAF tag LA.UM.5.5.c25-03100-8x96.0 into qcacld-2.0
Wrote simple python script to filter out warnings from compile output
Check extract_warnings.py and changes to build_kernel.sh
Vendor/aosp:
Monitor changelog under Dropbox link only
all changelogs
.
FAQ
I'm having general problems with the ROM installation or don't know what steps to perform to move from x to y or to restore or undo z. What shall I do, Dr. Phil?
Dr. Dr. Phil said:
First read the intro and then see whether your problem is covered here:
Standard Installation Types
Still issues? Then feel free to post in this thread!
Click to expand...
Click to collapse
Gcam mod has green lines in portrait mode or even in general
Dr. Dr. Phil said:
Settings -> advanced -> Fix Camera API2 -> support level override
and set it to "Zsl reprocessing"
Click to expand...
Click to collapse
Gcam mod video recording is force closing all the time.
Dr. Dr. Phil said:
This problem is present in Arnova's cam versions > 8, while photo shooting is working fine with the support level override fix above. You could use stock camera for video recording or use Arnova's gcam mod in versions 7.9 till 8.
Click to expand...
Click to collapse
Proximity sensor lets the screen get black while making a phone call
Dr. Dr. Phil said:
Use the recommended firmware (Oreo 8.11.22).
If that doesn't help, here is a fix that I used once successfully when I had the same problem.
Thanks to Mi5 Arsenal!:
flash zcx twrp
make a backup of your persist partition (let's call that x)
store x externally in case the fix shouldn't work or make anything worse (which I don't believe, but still)
download this zip file and place it where x had been stored (replace x with it)
hit restore in twrp, and select the new backup file you just put in place where x was
reboot to system
You can switch to official twrp afterwards without any problem!
Click to expand...
Click to collapse
Xposed isn't working or producing issues, what to do?
Dr. Dr. Phil said:
In my experience, xposed is very powerful, but can produce all kinds of weird and untraceable behaviour.
I don't recommend using it if not completely nessecary, and cannot support it.
Click to expand...
Click to collapse
Reserved
Hi mate... thanks for your dedication on our work!
Inviato dal mio Xiaomi Mi5 utilizzando Tapatalk
This is exactly what I was looking for N Rom with latest patches:laugh: .Ty so much for your work, will try it soon. :laugh:
What is for boot.img?
XxFatiHxX said:
What is for boot.img?
Click to expand...
Click to collapse
Just so you could flash back stock kernel separately.
Nothing you need for the ROM installation.
Thanks for this great work! Can I dirty flash it on latest original JDC nougat? And can I flash B-B Kernel or better not to do this?
ERRORR2 said:
Thanks for this great work! Can I dirty flash it on latest original JDC nougat? And can I flash B-B Kernel or better not to do this?
Click to expand...
Click to collapse
You should be able to dirty flash, although I think that a clean flash is advisable.
B-B-kernel should be working, but keep in mind that I am gonna keep updating the stock kernel and the B-B one is getting more and more outdated.
Edit:
This info is outdated!
B--B-kernel is even built into the ROM now!
The ol' but gold rom has waken up from long sleep
This rom is eas or hmp ?
Kyru said:
This rom is eas or hmp ?
Click to expand...
Click to collapse
EAS
Phil_Smith said:
EAS
Click to expand...
Click to collapse
Will it work with latest beta firmware ?
Will try soon
Kyru said:
Will it work with latest beta firmware ?
Click to expand...
Click to collapse
I would suggest Nougat-based firmware, but maybe on Oreo-based everything is working as well - can't say.
You need to try that out (on your own risk).
Thanks very much @Phil_Smith
Finally.. must try this one.. thanks @Phil_Smith
I can't believe this is perfect.
Can you add more status bar customizations?
Does alarm from switched off work with this rom?
Inviato dal mio MI 5 utilizzando Tapatalk
End of Life Nethunter Kernel for Samsung Galaxy S7 (SM-G930F/FD) LineageOS 16.0
Code:
I am not responsible for bricked devices.
If you going to flash it, you accepted it.
Of course your warranty is void.
This thread is only for herolte . If you have Edge go here
Nethunter Features:
BadUSB
HID gadget keyboard/mouse (with possibility to temporarily disable)
DriveDroid
USB WiFi, mac80211 (Monitor mode, packet capture, packet injection) [Compatibility List]
Ethernet
F2FS
Bluetooth HCI USB support
RTL-SDR DVB support
Extra:
Boeffla wakelock blocker v1.10
Wireguard
Download:
Latest version G930F here.
Installation:
1. TWRP Backup your ROM
2. Flash G930F_Nethunter_LineageOS16.0_v*.img
3. Flash latest Magisk
4. Install busybox can be one from Magisk repository
5. Install Magisk Nethunter module from repository it have all apps which are needed to get fully working Nethunter (Another version of Nethunter apk link)
6. Install kalifs-armhf-*.tar.xz by Nethunter manager
7. Extract Nethunter_Binaries.7z and binaries to folders:
Firmwares: system/etc/firmware and give permissions to every file rw-r--r--
hid-keyboard binary: system/xbin/ and give permissions to it rwxr-xr-x
8. Reboot
Now you have Nethunter on your LineageOS 16.0 ROM.
Extra:
In Utilities.7z are wifi testing tools binaries like aircrack-ng(Not needed for Nethunter only for test tools direct from android without Nethunter)
DriveDroid without bugs made by disabling HID Patch:
To disable HID Patch: use this command in terminal: "echo Y > /sys/module/g_android/parameters/hid_disable"
Changing mode isn't instant after changing module status. Use DriveDroid (mount iso -> dismount) to active hid_disable.
To enable HID Patch: "echo N > /sys/module/g_android/parameters/hid_disable" and use DriveDroid like with disabling HID Patch.
HIDPatchSwitch this is simple script which can switch between HID enabled and disabled and show changed status.
If you need LineageOS 15.1 kernel version is too available as version 0.1 in downloads.
XDA:DevDB Information
[KERNEL] [G930F] Nethunter for LineageOS 16.0 ROM, Kernel for the Samsung Galaxy S7
Contributors
Svirusx
Source Code: https://github.com/Svirusx/Nethunter-s7-kernel-LineageOS16.0
Kernel Special Features:
Version Information
Status: Stable
Created 2019-04-14
Last Updated 2019-11-06
CHANGELOG
2019-09-15 - v1.3
Update to kernel source to 10.09.2019.
2019-06-11 - v1.2
Update kernel source to 09.06.2019.
2019-05-14 - v1.1
Update kernel source to 12.05.2019.
2019-04-14 - v1.0
Initial release
Reserved
Hey, great job porting this! Do you know if it is possible to enable monitor mode on this kernel? It seems to be possible on you lineage 14 one. I think i have the bcm4359.
Jack_Rickwood said:
Hey, great job porting this! Do you know if it is possible to enable monitor mode on this kernel? It seems to be possible on you lineage 14 one. I think i have the bcm4359.
Click to expand...
Click to collapse
No is not possible to enable monitor mode with bcm4359 on Lineage 16, only with compatible usb cards. In LineageOS 14 is that possible because of modded wifi driver. This driver works only with LineageOS 14 but it is bugged. If you capture packets with this driver all of they are malformed and unusable for further testing, only packet injection works fine.
You can try Dualboot patcher and have two version of LineageOS.
Ah, ok, thx
Is there anyway to broadcast 5G hotspot with this phone? I've tried using create_ap in a chroot debian, and it didn't work at all
deorth said:
Is there anyway to broadcast 5G hotspot with this phone? I've tried using create_ap in a chroot debian, and it didn't work at all
Click to expand...
Click to collapse
Galaxy s7 doesn't support 5G. I don't think if you can use USB 5G adapter to make hotspot. Android haven't much drivers included in kernel.
Svirusx said:
Galaxy s7 doesn't support 5G. I don't think if you can use USB 5G adapter to make hotspot. Android haven't much drivers included in kernel.
Click to expand...
Click to collapse
Is this kernel compatible with other aosp roms?
alanifotis said:
Is this kernel compatible with other aosp roms?
Click to expand...
Click to collapse
It is compatible with all custom roms which kernel is based ivanmeler LineageOS 16.0 source. Of course BACKUP before trying flash.
Svirusx said:
It is compatible with all custom roms which kernel is based ivanmeler LineageOS 16.0 source. Of course BACKUP before trying flash.
Click to expand...
Click to collapse
Ok thanks
Svirusx said:
Galaxy s7 doesn't support 5G. I don't think if you can use USB 5G adapter to make hotspot. Android haven't much drivers included in kernel.
Click to expand...
Click to collapse
sorry if my words wasn't clear, for I'm not a native speaker. I meant 5GHz wifi hotspot (802.11ac), not the next generation mobile network.
deorth said:
sorry if my words wasn't clear, for I'm not a native speaker. I meant 5GHz wifi hotspot (802.11ac), not the next generation mobile network.
Click to expand...
Click to collapse
Build in wifi card isn't much compatible with chroot. I don't think if it's possible.
Svirusx said:
Build in wifi card isn't much compatible with chroot. I don't think if it's possible.
Click to expand...
Click to collapse
ok, I guess I'll use 2.4G then. Thank you for the reply.
@Svirusx
Wich files should i download from kalifs repository?
kalifs-armhf-minimal.tar.xz or kalifs-armhf-full.tar.xz
And where can i fund utilities and nethunter apk link seems broken
alanifotis said:
@Svirusx
Wich files should i download from kalifs repository?
Click to expand...
Click to collapse
kalifs-armhf-full.tar.xz or kalifs-armhf-minimal.tar.xz
If you download minimal you can further install metapackages in chroot.
This depends for what you want use Kali Linux in chroot look at metapackages.
Svirusx said:
kalifs-armhf-full.tar.xz or kalifs-armhf-minimal.tar.xz
If you download minimal you can further install metapackages in chroot.
This depends for what you want use Kali Linux in chroot look at metapackages.
Click to expand...
Click to collapse
What about utilities.7z and nethunter apk? Where can i download them
alanifotis said:
What about utilities.7z and nethunter apk? Where can i download them
Click to expand...
Click to collapse
I updated first page you can get more info from it.
utilities.7z are near first version of Nethunter kernel and now direct link is too in first page.
Svirusx said:
I updated first page you can get more info from it.
utilities.7z are near first version of Nethunter kernel and now direct link is too in first page.
Click to expand...
Click to collapse
Thank you very much man :laugh:
I managed to install kalinethunter and full chroot,but when i open kali terminal it runs some commands quickly and closes,any help?