hello guys before I’m be crazy I want ask something for you, so I bought A5 2017 for training purposes, but this Sh1t never show me OEM unlock mode, Trying all ways from internet like, set date back, waiting few days, flash anothers roms, trying also fastboot, but “Android”doesn’t appear on my computer, so I’m really lost, someone have this issue before? please my head is nearly to colapse.
Do factory reset and when it asks for date roll it back a few years.. keep wifi off.. reset tablet and when it boots up.. do second factory reset.. don't enable wifi till tablet is done setting up.. turn on wifi and bobs your uncle.
sedablaze said:
Do factory reset and when it asks for date roll it back a few years.. keep wifi off.. reset tablet and when it boots up.. do second factory reset.. don't enable wifi till tablet is done setting up.. turn on wifi and bobs your uncle.
Click to expand...
Click to collapse
Oh and keep location off too
Related
Ouch!!!!!
I tried the radio update, during which I got a communication error.
Now I have a brick!
The blue i-mate screen comes up. the rom info is displayed (radio still says 1.03.00) and there it is stuck.
Now what? Hard reset? (how do you hard reset from that point?)
Bootloader? How is that done?
Please help. I am off to go under my blanket to cry.
Just retry the radio update again and again, put it in bootloader
How do I get bootloader? I tried the camera+power+reset combination but it still does the same thing, no bootloader menu.
Or do I have to have the bootloader files in the storage card first?
Can I also get help on how to extract the files. I don't know where the installer is putting the binaries, and at this point I would very much prefer not guessing what files to put where.
bootloader
try this
light + power + reset
Re: bootloader
dherrero said:
try this
light + power + reset
Click to expand...
Click to collapse
That did something. Now I have a white screen (no light) that says "Serial" on top and "v 0. 60" at the bottom.
I have the following files in the sd:
EnterBL.exe
GetServiceData.exe
radio_.nbf
RUU.conf
RUU.dll
UI.dll
But it is not doing anything.
yes, now it's in bootloader. Now connect the jasjar to your pc and execute the upgrade. If it doesnt work kill the activesync processes (WCESMgr.exe and wcescomm.exe) and repeat the upgrade
OK! That seemed to work, but it still gets stuck at the bootup screen (except now it shows the new radio version).
The update program asks for a hard reset, but others in another thread mentioned they did not need a hard reset after this update.
Is there something else I can try before trying a hard reset?
I just spent a week to set the damned thing to the way I like, and don't want to do all that again.
I didnt hard reset. try resetting 2 or 3 times. If it doesnt work then hard reset
I took out the battery. Will wait a bit and try resetting a few times.
How long does it take for yours to show some activity after the rom versions are displayed?
It does take longer for this device to bootup, but I wonder if the new rom made a difference there.
Usually the blue boot screen disappears in 30 seconds. But when i installed pocket plus many times it keeped freezed and a had to reset 3 o 4 times.
Is your case?
dherrero said:
Usually the blue boot screen disappears in 30 seconds. But when i installed pocket plus many times it keeped freezed and a had to reset 3 o 4 times.
Click to expand...
Click to collapse
Hmm. I don't have pocket plus, but I have the spb gprs monitor (or whatever it is called) at the startup. Maybe that's causing a problem with the new radio.
I will reset 3 - 4 more times and then do a hard reset.
If it does not come back from hard reset, the bawling you hear all the way out there is me.
he he . I ve spb gprs monitor too and it works fine.
good luck :wink:
When perform soft reset, wait 1 or 2 minutes before doing other soft reset
OK, now it is time to cry.
It is not coming back from hard reset either.
It is officially a brick. Any more ideas? Please?
thy to make the update again. Perhaps this revives it
if a radio update is available, maybe a rom update is around the corner.
Or just a recovery standard rom
Does exits an official rom to reinstall jasjar rom?
I am doing the radio update again to see if that helps.
I will probably need to contact imate support for a recovery rom image I suppose. I suppose I should tell them what I was doing.
But this update was from imate, right, so I didn't do anything "wrong".
If someone has a rom, please let me know.
So, I am getting the runaround.
iMate says they don't have the rom to send me and I should send the device to the service center. The service center says they don't work on JasJars there.
So I am stuck with a paperweight?
Try Hard reset....
Just try to Hard reset .. most probably one of your already installed S/W causes the machine to hangup.... once you clear after Hard reset it should boot up.. worse while before sending it back to imate and being blamed for loading un-official and not released update... Unfortunatly there no "shipped rom" yet. you best choice to recover the paper weight is to hard reset and perhaps load S/W again. ... I have been trying to dump the rom for days with no success .. once one of us can do it we are releaseed.
Good luck
Re: Try Hard reset....
Dubi said:
Just try to Hard reset .. Good luck
Click to expand...
Click to collapse
Already did the hard reset (many times) and nothing changed.
The problem started after the radio update, and the hard reset does not reset that update (I see the new version on startup).
Unless there is a harder reset I can do, I suppose I will have to wait for the rom.
makes a grown man cry...
Hi! I have recently flashed my hp ipaq hx2410 to wm2005, the update process went fine but the device doesn't boot anymore. It shows the loading bar and it gets stuck when it fills up. I have tried hard reseting it but the problem persists. I can't flash it because active sync doesn't "see" it anymore... just a local area connection X - limited or no conectivity. What can I do ? Is there a way to boot the device in some sort of flash mode or something? Thank you very much
I had to do hard reset about 3 times when upgrading my hx2490B.
f1xxx3r said:
Hi! I have recently flashed my hp ipaq hx2410 to wm2005, the update process went fine but the device doesn't boot anymore. It shows the loading bar and it gets stuck when it fills up. I have tried hard reseting it but the problem persists. I can't flash it because active sync doesn't "see" it anymore... just a local area connection X - limited or no conectivity. What can I do ? Is there a way to boot the device in some sort of flash mode or something? Thank you very much
Click to expand...
Click to collapse
I have done a lot of hard resets but the device still gets stuck.
Another thing... I did not hard reset the device before de WM05 rom update. I thought it should do that by itself.
And second... If I get it to work I want to flash it to WM06. I have the rom but are there some special steps to be followed for this update ?
My pda still gets stuck in the bootloader and then the backlight turns off. Should I leave it that way untill the battery is completely flat ?
Some people say that removing the battery for 24 hours may help.
Try that.
When i flashed my 2490 i did format the device and than did the flash.
But I don't think that matters cause the first time when i did flash i didn't format the drive and it was OK.
f1xxx3r said:
I have done a lot of hard resets but the device still gets stuck.
Another thing... I did not hard reset the device before de WM05 rom update. I thought it should do that by itself.
And second... If I get it to work I want to flash it to WM06. I have the rom but are there some special steps to be followed for this update ?
My pda still gets stuck in the bootloader and then the backlight turns off. Should I leave it that way untill the battery is completely flat ?
Click to expand...
Click to collapse
I'll remove the battery then and see tommorow. The main question is: is my device completely dead or is it "resurectable" ? I don't think that it need servicing .... but ... just asking
Thank you for the replies. If the batterry removal fix works I'll post here. In the meantime any other possible sollutions are welcome.
My pda still doesn't boot. I have removed the battery for 24 hours and nothing. I have drained the battery and nothing. Did numerous hard resets and still no result. Can anyone help me ?
Just an idea (since I had to do this yesterday) maybe try formatting the device.
After flashing 4PDA ROM to my device it would get stack on the same screen as yours. After formatting it all went OK and I had WM6.
For my device I had to click calender + power + messaging + reset, release reset - release all.
f1xxx3r said:
My pda still doesn't boot. I have removed the battery for 24 hours and nothing. I have drained the battery and nothing. Did numerous hard resets and still no result. Can anyone help me ?
Click to expand...
Click to collapse
It's still dead....
It's back. P.S. Format did the trick
Same problem
i have " HP IPAQ hx2410 " with WM2003 CE 1.10.0 and i upgraded with this window 5.2 it upgraded successfully but i m stuck on the first loading screen. its stuck when loading complete i have tried every thing such as boot-loader thing and also cant downgrade it . . . so kindly plzzz any one tell me how can i go to my initial state on wm2003 ASAP.
WHAT IS P.S. Format ??? and how can i do that . . .
The answer is here:
http://tinyurl.com/2d4cza7
Hi, maybe a stupin question
WHen i unlocked my phone via chewron and than after an hour did hard reset, will the phone be locked again? Omnia 7...
Thanks
There are no stupid questions, only the ones that are never asked.
I think you will have to run the unlocker again, as the phone will be back to factory settings. Also if you have synced using Zune this will also lock chevron, unless you had set it to airplane mode.
This is the solution i have for getting the phone back to stock ROM.Also this is the solution for KDZ extract error.
So follow the next steps and propably you will not have problem
This is what i did:
1)Follow the steps 1-8 from this post but not for your phones stock ROM,but some other that is lower than 1GB.(I tried the open European edition)
2)Hold the power button some seconds so the phone will colse.After that hold vol- and power button.This is the way you do factory reset.Press 2 times the power button to agree to do a factory reset.(this step is optional if all were ok from the last step.Mine were stack in lg logo so i had to do this)
3)After this normally the mobile phone will open,but u may have not signal so you cant have calls.Dont warry.Download the Lg PcSuite from here.Install the programm
4)Connect the phone and select PC SUITE.Then in PC SUITE go to Device/Device Software Upgrade and the programm will start to upgrade your phone.But this is the magic(well not magic,maybe PC SUITE scans your IMEI.)The new upgrade that will be done but the ROM that will be downloaded will be for exactly your phones edition (mine was F180L).
5)You should have your phone fully charged.The update will last some time,but have patience,you are done!
6)After the update you'll have to do one more factory reset like step 2.
7)Your mobile phone is ready like new
Hope i helped some guys that i've seen they had the same problem with me.Any questions you have make it,and ill try to help you.Good luck!!
While the phone is off, if i press vol - + power, it will get me to the hard reset menu?
Luis_D1 said:
While the phone is off, if i press vol - + power, it will get me to the hard reset menu?
Click to expand...
Click to collapse
yes.Basically hold it for about 10 secs.The second time the screen goes blank let the buttons and you will get to facory reset mode.Try it some times.
Oh, didn't know that. Thank you
I did exactly this and even after all the process and imei scanning and installling the upddate, the phone keeps rebooting and it doesnt recognize sim cards so no calls or messages
LRC1710 said:
I did exactly this and even after all the process and imei scanning and installling the upddate, the phone keeps rebooting and it doesnt recognize sim cards so no calls or messages
Click to expand...
Click to collapse
what is the model of your phone?have you done a hard reset after the update?
MafiaGR said:
what is the model of your phone?have you done a hard reset after the update?
Click to expand...
Click to collapse
is the E977, yes I did a hard reset, no luck, since I installed my carriers updated firmware for my country and it unrooted the device and also locked the bootloader, I took the phone to warranty to see if I can get a new one or maybe they can repair it, they can't notice I did anything to it, but im gonna be without phone for up to 2 weeks.
I miss a lot when I had a Nexus and there was a whole community to help with this issues, this phone has very little support here on xda,
Yeah all those different editions are annoying.You ve done the best choice to take it to LG's service.It may be 2 weeks without phone but it will be fixed for sure!
Hey Forum! Hopefully y'all can help me. I have a S9 from Rent A Center and so does my wife, well her phone updated to Pie(9.0) 3 weeks ago and we're both on Cricket Wireless. Well mine hasn't updated and I've even went in and manually checking for updates and it says my phone is up to date so I downloaded the firmware from Sammobile and it failed cause i forgot to turn on USB Debugging in the developer options. So I restart my phone and go to settings and hit the build number and it says that developer options has already been turned on. But back in settings the options are nowhere to be found. So I figured doing a factory reset would help, but when i reset the phone and booted it up and went back to the build number and pressed it 7 times instead of saying developer options had been enabled it backed completely back out to my home screen and so i went back to settings and hit the build number again and it said that the developer options had already been turned on but again nowhere to be seen. So my question is is there a way to remove RAC from the phone or is there a way to remove knox where rac is on the phone? I need help cause I want the update, but it seems there is no way to do it with RAC on the phone.
USB debugging has nothing to do with flashing firmware with Odin
Ok then. I get a mdm mode cant download when I try flashing the firmware in download mode
Bamablood94 said:
Ok then. I get a mdm mode cant download when I try flashing the firmware in download mode
Click to expand...
Click to collapse
Not sure if it still works with the S9, but there was a trick where you set up PIN security on the phone, but also enable the setting where if the wrong PIN is entered 10 times it factory resets the device, this supposedly removed the Rent-a-Centre crap after the reset which you cannot do while it is still active
Then enter the PIN 10 times wrongly
*Detection* said:
Not sure if it still works with the S9, but there was a trick where you set up PIN security on the phone, but also enable the setting where if the wrong PIN is entered 10 times it factory resets the device, this supposedly removed the Rent-a-Centre crap after the reset which you cannot do while it is still active
Then enter the PIN 10 times wrongly
Click to expand...
Click to collapse
So it's a different factory than going into the settings and doing a factory reset?
Bamablood94 said:
So it's a different factory than going into the settings and doing a factory reset?
Click to expand...
Click to collapse
No, same one but supposedly you do not have access to that with Rent a Centre software on the device, nor can you do it from recovery (As far as I am aware from reading others with the same phones)
Oh so basically I'm screwed until they come out with the update for my device
Bamablood94 said:
Oh so basically I'm screwed until they come out with the update for my device
Click to expand...
Click to collapse
?
Do you have the ability to factory reset your phone as it stands right now?
If no, follow the above instructions...
*Detection* said:
?
Do you have the ability to factory reset your phone as it stands right now?
If no, follow the above instructions...
Click to expand...
Click to collapse
Yes I can and have reset my phone. But when I set it back up it shows up rent a center in the Knox portion of it and I guess reinstalls them. So to speak