LienageOS 20 on Chuwi Hipad Plus - LineageOS Questions & Answers

The android 12 is working fine on my Tablet but I tried to flash the android 13 version yesterday, and while the tablet connects fine to my home Wifi I don't have access to internet.
Both PixelOS and SparrowOS Android 13 are working fine so why LineageOS isn't?

what version you installed, and how?
do you also have intermittent wifi problems with this tablet? can you activate extra dim function on android 12?

[email protected] said:
what version you installed, and how?
do you also have intermittent wifi problems with this tablet? can you activate extra dim function on android 12?
Click to expand...
Click to collapse
This one I think:
lineage-20.0-20230115-UNOFFICIAL-arm64_bgN.img.xz
I ve never had problem with the wifi.
Which version did you install? Did you have any trouble getting internet to work?

Related

Nexus 5x - search CustumRom which with Android Auto works?

Hi,
is there, or does anyone know a customrom for the nexus 5x based on android 8.1 or 9 which works with the "android auto" app?
Thank you!
Ciao,
Today I have a N5X running with Stock firmware (october patch)
Unfortunately Android Auto is not running well on my SYNC3 Infotainment system
I tried ABC rom ( a very well ROM light and smoothly) but ... no success
I would like ask if there is any direct experience of success
It is not very important if the ROM is Nougat or Oreo or Pie ...
The important thing is the proven functionality of Android Auto and ... a small drainage of battery
Thanks a lot
Paolo

Bluetooth keeps crashing

Hi. I'm running Lineage OS on a Samsung S5 running Android 8.1. Bluetooth keeps crashing me on quite often. It works perfectly when it is running though. I have cleared out the caches in the bootloader. That made no difference. The rest of Android works perfectly.
Any ideas? Thanks!
irata67 said:
Hi. I'm running Lineage OS on a Samsung S5 running Android 8.1. Bluetooth keeps crashing me on quite often. It works perfectly when it is running though. I have cleared out the caches in the bootloader. That made no difference. The rest of Android works perfectly.
Any ideas? Thanks!
Click to expand...
Click to collapse
Update to official version. LineageOS.org
kurtn said:
Update to official version. LineageOS.org
Click to expand...
Click to collapse
Thanks, isn't that what I'm running already?
irata67 said:
Thanks, isn't that what I'm running already?
Click to expand...
Click to collapse
Android 8.1 is lineageOS 15.1 that's no supported version.
Ok, thanks. That does mean I have to rebuild everything on my phone if I upgrade, which is a major pain.
kurtn said:
Android 8.1 is lineageOS 15.1 that's no supported version.
Click to expand...
Click to collapse
Lineage 15.1 is just an older version, it doesn't mean that it doesn't work. Anyways my phone is a 900V (Verizon) phone and I am using Page Plus as a service provider. I put the latest version of the KLTE Lineage OS on my S5 and it works fine on the first boot. When you reboot it, it can no longer get cell service. I think it says Sim Status Not Connected or something like that. No matter what I try, I cannot get cell service.
In order to get the cell service working again, I have to use Odin to flash "COMBINATION_VZW_FA44_G900VVRU2APA1_VZW2APA1_257265 6_REV00_user_mid_noship_MULTI_CERT.tar.md5 "
Then I have run through the steps to unlock the bootloader again. (CID15) Then I had to install my Android 8.1
version that I was running before. (major pain to do all this) So I'm back to square one.
How can I get the cell service to work on my Verizon S5 in the newer version of LineageOS?
Thanks!
ASK @curiousrom
I sent him an email.

rSAP on Android 11

hey,
after updating on Android 11 my rsap-bluetooth connection isn't working anymore.
it worked perfectly before updating on 11.
does anybody got the same problem? and is there any solution for?

Android 11 (OneUI 3.0) loosing Wi-Fi IPv6 Address after Sleep in N-975F

I have a Note 10+ (Exynos) N-975F, after updating to Android 11 (OneUi 3.0) the phone looses the Wi-Fi IPv6 connection after "sleeping" for some time. Evertything was working fine in android 10 and I have many other devices without problems in the wifi network (including Samsung a30s running android 9 and Samsung J7 running Android 8).
Does anyone have noticed this ? I´m using https://ipv6-test.com/ for testing.
fabiovilan said:
I have a Note 10+ (Exynos) N-975F, after updating to Android 11 (OneUi 3.0) the phone looses the Wi-Fi IPv6 connection after "sleeping" for some time. Evertything was working fine in android 10 and I have many other devices without problems in the wifi network (including Samsung a30s running android 9 and Samsung J7 running Android 8).
Does anyone have noticed this ? I´m using https://ipv6-test.com/ for testing.
Click to expand...
Click to collapse
Best to check for an update of the stock firmware.
On my Android 11 with OneUI 3.1 IPv6 is supported.

Question One plus 9 pro Android auto not working C40 beta potential solution

I am currently running the c40 beta on my OnePlus 9 pro and everything works well except Android auto. I wanted to offer a solution for anyone else having this issue that worked for me.
1. Go into developer settings
2. Change the default USB configuration to media transfer
This might have some security concerns or cause other issues but it has been working for my Android auto. Hope it helps for other people
shaiknbaik said:
I am currently running the c40 beta on my OnePlus 9 pro and everything works well except Android auto. I wanted to offer a solution for anyone else having this issue that worked for me.
1. Go into developer settings
2. Change the default USB configuration to media transfer
This might have some security concerns or cause other issues but it has been working for my Android auto. Hope it helps for other people
Click to expand...
Click to collapse
maybe coloros not supported android auto
coloros us carlink
brmbjn said:
maybe coloros not supported android auto
coloros us carlink
Click to expand...
Click to collapse
C40 is OOS at least what I am running is. I tried Color OSC41 and that doesn't support android auto

Categories

Resources