i cant flash anything to my Huawei G8 I'got bootloop after flashing dolby atmos, and now i cant open my phone and i flash stock recovery and still not working dload and something i already fix this last time, i flash MM huawei stock and it works , now my problem is i forgot to use developer option oem unlock , and now my phone is not booting im stuck at recovery and fastboot , idont know what to do men my code key from emui.com is not working anymore, anyone can help me ? my bootloader is not working too it says unknown anyone can help me about this? i use all the things like fastboot erase oem fastboot oem unlock 16digit i cant flash anything because of frp lock please help me i already use my codes and not working.
thanks to people who answer
Hi all,
I am new to this forum, but have some experience with rooting and custom roms(oneplus one and samsung)
Now with the Mi Max 3, which was unlocked, i have flashed the recovery twrp-3.2.3-0-nitrogen.img, but I did not realize that
i had to reboot into this recovery from the fastboot mode.
so I endet up with a locked bootloader and bottloop and am not able to unlock the bootloader again.
I think my only solution is the test-point method and a EDL authorized account.
Some help would be greatly appreciated.
thanks
Henry
You don't have to boot into the bootloader from fastboot mode, you can press the power button and volume up button like on almost all other Android phones to boot into TWRP recovery. Sometimes it takes a few attempts to get right, but you should learn how to do it eventually.
Unfortunately it sounds like you had one of the dodgy re-sold Chinese models that had been re-flashed with Global firmware and it's locked your bootloader again on reboot.
Your only option is to use the official Miui Flash tool to boot into fastboot mode, flash the latest Global Developer ROM, and then sign in with your account and apply to unlock the bootloader again using the Miui unlock program. It may be instant but, they'll probably make you wait 720 hours, as the entire point of the program was to stop phones like yours being re-sold outside China.
At least you'll have a usable, non-bricked device though.
Thanks for your answer.
now I have opened the backcover (yes was much work ( I succeded without destroying something) and could apply the test point method to get into the lde mode.
Win10 shows it as qualcomxx at com 3
what is the best way now to awake it to life again? even without unlocking.
hi,
with the test point method I could flash the chinese rom, and the mi max 3 is awaken to life again!
The bootloader is still locked.
I have applied for unlocking, but have to wait some 15 days.
One tip: if the case is open, one can apply a little bit of silicon grease to the small pins on the side of the plastic frame
before closing it. Opening it again is much easier then.
One question: if I replace the recovery.img of the chinese rom with a TWRP image (renamed to recovery.img)
and flash that modified rom with the test point method, could this probaly work?
With a working TWRP one could install other roms without unlocking bootloader.
If yes, which TWRP would you apply?
Thanks
freedoc said:
Hi all,
I am new to this forum, but have some experience with rooting and custom roms(oneplus one and samsung)
Now with the Mi Max 3, which was unlocked, i have flashed the recovery twrp-3.2.3-0-nitrogen.img, but I did not realize that
i had to reboot into this recovery from the fastboot mode.
so I endet up with a locked bootloader and bottloop and am not able to unlock the bootloader again.
I think my only solution is the test-point method and a EDL authorized account.
Some help would be greatly appreciated.
thanks
Henry
Click to expand...
Click to collapse
Flashing a recovery should not lock your bootloader, so I don't know how you did it. Note, that if you are using Xiaomi's firmware tool, you should not forget about unticking the box to lock the bootloader. But I would suggest to stay away from that tool and go command line instead with fastboot.
If you can access fastboot, I'd recommend to flash an official fastboot tgz ROM of your choice. Official ROM should boot even with an unlocked bootloader and you may start all over again more carefully.
So I think you might be able to avoid using EDL mode at this stage.
probally I forgot to untick that box. The bootloader is locked and I have to wait 319 hours.
I have got to love the test point EDL method which is simple and effective, and gave me control over the device again.
If I flash again the chinese fastboot rom (in which I have changed the original recovery.img into TWRP.img, named recovery.img) via the EDL
will that give me an installt TWRP (still with locked bootloader, but possible to install custom roms) or will i have a brick again?
thanks
freedoc said:
probally I forgot to untick that box. The bootloader is locked and I have to wait 319 hours.
I have got to love the test point EDL method which is simple and effective, and gave me control over the device again.
If I flash again the chinese fastboot rom (in which I have changed the original recovery.img into TWRP.img, named recovery.img) via the EDL
will that give me an installt TWRP (still with locked bootloader, but possible to install custom roms) or will i have a brick again?
thanks
Click to expand...
Click to collapse
Only you can answer that question by trying it out. Are you sure you have to wait for the unlocking again? Double check that! As I know you also need a priviliged xiaomi account to be able to resurrect a device in EDL mode.
My device suddenly got stock at bootloop
I entered into fastboot and recovery mode
And there are options like frp locked
Phone locked
I don't know what to do!
Bootloader is locked!
Can anyone help me please!!!
Hello there,
I'm having a complicated issue and i wish someone really could help me.
My A2 lite is totally brick and stuck on bootloop .. i tried the below with no luck
1- EDL Mode using test points then flashing using MiFlash .. still being in bootloop
2- Fastboot commands can't be used as bootloader is locked
3- Fastboot unlock (OEM unlock is not allowed)
4- Can't boot to TWRP
5- Tried to apply update from SD Card .. update applied with still the same issue
I appreciate if you could assist me with this issue
Any update on your problem?
ıt seems your phone is in a better shape than mine; I have a Mi A1, and it doesn't flash at all, because of the EDL auth requirement. Only MiFlashBeta "appears" to flash it, but I highly doubt if it actually writes anything to phone.
Let's see if someone can help me, I locked the bootloader again after putting the last stock rom of my moto g10 and it does not start. I only have access to fastboot with flash locked. i can't unlock it again or flash stock rom. with lmsa it gives me an error and stops at 26%. I have tried to flash the blankflash but it does not take the qualcomm drivers but the android device. I don't know what to do to revive it.
sorry for my bad english, google translate
I managed to put it in edl mode and flash a blankflash, but I get the same result bootloader locked. I can't flash anything or unlock the bootloader, it's definitely dead. It only remains to find a motherboard to replace it...
Ok, what I have is to find a compatible blankflash and stock firmware so that it will let me flash stock rom. someone could help me? I have already tried 3 different ones with no result.
whit themagictoolinstaller.exe i managed to change the flashinglocked mode to oemlocked. After this with rescue & smart assistant I was able to flash his stock rom. Solved