Let's see if someone can help me, I locked the bootloader again after putting the last stock rom of my moto g10 and it does not start. I only have access to fastboot with flash locked. i can't unlock it again or flash stock rom. with lmsa it gives me an error and stops at 26%. I have tried to flash the blankflash but it does not take the qualcomm drivers but the android device. I don't know what to do to revive it.
sorry for my bad english, google translate
I managed to put it in edl mode and flash a blankflash, but I get the same result bootloader locked. I can't flash anything or unlock the bootloader, it's definitely dead. It only remains to find a motherboard to replace it...
Ok, what I have is to find a compatible blankflash and stock firmware so that it will let me flash stock rom. someone could help me? I have already tried 3 different ones with no result.
whit themagictoolinstaller.exe i managed to change the flashinglocked mode to oemlocked. After this with rescue & smart assistant I was able to flash his stock rom. Solved
Related
i was successfully rooting my phone, using fastboot flash, i was thinking to use custom recovery but it need to unlock bootloader, i jog myself around google and found my self exhausted since none of their method work on my device, once i found a way to unlock my bootloader by downgrading the fastboot version, so i install the previous fastboot version with stock recovery on my phone, after that my phone start to reboot and stuck at asus logo, now its stuck at USB logo(clover view plus) now i pray to god to found solution to my problem rather i need dnx, ifwi, dnx osr, and fastboot .bin that worked with my device or any other way that make it through fastboot or droidboot again, i really really appreciate any working brain of yours
Hi all,
I am new to this forum, but have some experience with rooting and custom roms(oneplus one and samsung)
Now with the Mi Max 3, which was unlocked, i have flashed the recovery twrp-3.2.3-0-nitrogen.img, but I did not realize that
i had to reboot into this recovery from the fastboot mode.
so I endet up with a locked bootloader and bottloop and am not able to unlock the bootloader again.
I think my only solution is the test-point method and a EDL authorized account.
Some help would be greatly appreciated.
thanks
Henry
You don't have to boot into the bootloader from fastboot mode, you can press the power button and volume up button like on almost all other Android phones to boot into TWRP recovery. Sometimes it takes a few attempts to get right, but you should learn how to do it eventually.
Unfortunately it sounds like you had one of the dodgy re-sold Chinese models that had been re-flashed with Global firmware and it's locked your bootloader again on reboot.
Your only option is to use the official Miui Flash tool to boot into fastboot mode, flash the latest Global Developer ROM, and then sign in with your account and apply to unlock the bootloader again using the Miui unlock program. It may be instant but, they'll probably make you wait 720 hours, as the entire point of the program was to stop phones like yours being re-sold outside China.
At least you'll have a usable, non-bricked device though.
Thanks for your answer.
now I have opened the backcover (yes was much work ( I succeded without destroying something) and could apply the test point method to get into the lde mode.
Win10 shows it as qualcomxx at com 3
what is the best way now to awake it to life again? even without unlocking.
hi,
with the test point method I could flash the chinese rom, and the mi max 3 is awaken to life again!
The bootloader is still locked.
I have applied for unlocking, but have to wait some 15 days.
One tip: if the case is open, one can apply a little bit of silicon grease to the small pins on the side of the plastic frame
before closing it. Opening it again is much easier then.
One question: if I replace the recovery.img of the chinese rom with a TWRP image (renamed to recovery.img)
and flash that modified rom with the test point method, could this probaly work?
With a working TWRP one could install other roms without unlocking bootloader.
If yes, which TWRP would you apply?
Thanks
freedoc said:
Hi all,
I am new to this forum, but have some experience with rooting and custom roms(oneplus one and samsung)
Now with the Mi Max 3, which was unlocked, i have flashed the recovery twrp-3.2.3-0-nitrogen.img, but I did not realize that
i had to reboot into this recovery from the fastboot mode.
so I endet up with a locked bootloader and bottloop and am not able to unlock the bootloader again.
I think my only solution is the test-point method and a EDL authorized account.
Some help would be greatly appreciated.
thanks
Henry
Click to expand...
Click to collapse
Flashing a recovery should not lock your bootloader, so I don't know how you did it. Note, that if you are using Xiaomi's firmware tool, you should not forget about unticking the box to lock the bootloader. But I would suggest to stay away from that tool and go command line instead with fastboot.
If you can access fastboot, I'd recommend to flash an official fastboot tgz ROM of your choice. Official ROM should boot even with an unlocked bootloader and you may start all over again more carefully.
So I think you might be able to avoid using EDL mode at this stage.
probally I forgot to untick that box. The bootloader is locked and I have to wait 319 hours.
I have got to love the test point EDL method which is simple and effective, and gave me control over the device again.
If I flash again the chinese fastboot rom (in which I have changed the original recovery.img into TWRP.img, named recovery.img) via the EDL
will that give me an installt TWRP (still with locked bootloader, but possible to install custom roms) or will i have a brick again?
thanks
freedoc said:
probally I forgot to untick that box. The bootloader is locked and I have to wait 319 hours.
I have got to love the test point EDL method which is simple and effective, and gave me control over the device again.
If I flash again the chinese fastboot rom (in which I have changed the original recovery.img into TWRP.img, named recovery.img) via the EDL
will that give me an installt TWRP (still with locked bootloader, but possible to install custom roms) or will i have a brick again?
thanks
Click to expand...
Click to collapse
Only you can answer that question by trying it out. Are you sure you have to wait for the unlocking again? Double check that! As I know you also need a priviliged xiaomi account to be able to resurrect a device in EDL mode.
Hello,
i would like to ask if someone on this forum can help with my bricked motorola g6. The bootloader is locked and i cannot access OEM unlock in the system. The only solution i would see is to use an full mmcblk0 image. It would be kind if someone could give another solution or provide an mmcblk0 image.
Greetings,
zOnlyKroks
still no progress as of yet
try booting with boot.img of the same version as installed in your phone. use fastboot getvar all to find out your phones version and then download rom and extract boot omg inside zip file and finally type fastboot boot boot.img
Then try OEM unlock. Is it gray? wait 7 days without shutting phone off ( you can turn screen off, but not entire phone). Didn't help? try updating to lastest version of your phone if not already up to date.
After a decade,5 phones and countless roms later I finally bricked an android. I relocked bootloader after flashing custom rom without proprt thinking and now phone is stuck on fastboot but will not let me flash anything.
If i try to boot it shows "no os found" error. Fastboot shows "flashing_locked" and i can't unlock it again as it won't boot into OS.
I managed to get into edl mode and QFIL tool is recognizing the device and is reading the imei,partitions. So I think with proper firehose file and elf firmware It is possible to bring back the phone to life.
i want to know if it is possible to port stock rom(xml) to QFIL compatible(elf) file? there are already manuals on creating raw and patch files. So what would it take?
Hi vamsi,
I am also in same problem. I have moto g40 and in the same situation no os found" error. Fastboot shows "flashing_locked". Not able to flash anything.
Can you please guide me how to get into edl mode.I tried below command/sites and none of them worked :-
fastboot oem blackflash - Got error "command restricted"
And tried everything mention in this site https://www.ytechb.com/how-to-boot-into-edl-mode-android/#:~:text=1 Download Fastboot EDL zip file and extract,This will boot the phone into EDL Mode. Nothing worked
vamsi53 said:
Contact
Click to expand...
Click to collapse
Sure i will check with him.
Thanks
Sonu19kr said:
Sure i will check with him.
Thanks
Click to expand...
Click to collapse
I Am Facing Th Same Problem And I am Already Scammed In The Telegram Groups Please Can You Help Me And Can You Tell How To Get Into EDL MODES In Motorola G40 Fusion
vamsi53 said:
After a decade,5 phones and countless roms later I finally bricked an android. I relocked bootloader after flashing custom rom without proprt thinking and now phone is stuck on fastboot but will not let me flash anything.
If i try to boot it shows "no os found" error. Fastboot shows "flashing_locked" and i can't unlock it again as it won't boot into OS.
I managed to get into edl mode and QFIL tool is recognizing the device and is reading the imei,partitions. So I think with proper firehose file and elf firmware It is possible to bring back the phone to life.
i want to know if it is possible to port stock rom(xml) to QFIL compatible(elf) file? there are already manuals on creating raw and patch files. So what would it take?
Click to expand...
Click to collapse
Can You Please Help How To Get Into EDL MODES
hi guys.
im from Austria and have a Xiaomi 11t.
yesterday i tryed to update my phone ota and now the problem is that i can't boot it anymore.
to bad that i have locked bootloader and snapdragon ;(
i tried with almost every tool i have found for xiaomi to open bootloader to flash the rom or recover it.
also fastboot dont let me flash rom cause of locked bootloader.
fastboot is working and sometimes i got recovery option working.
does anybody has another option to try?
thx for help
mozzi75 said:
hi guys.
im from Austria and have a Xiaomi 11t.
yesterday i tryed to update my phone ota and now the problem is that i can't boot it anymore.
to bad that i have locked bootloader and snapdragon ;(
i tried with almost every tool i have found for xiaomi to open bootloader to flash the rom or recover it.
also fastboot dont let me flash rom cause of locked bootloader.
fastboot is working and sometimes i got recovery option working.
does anybody has another option to try?
thx for help
Click to expand...
Click to collapse
You can try this tool.
https://xiaomitools.com/sp-flash-tool-en/
There are also other tools, do a search on XDA and Google.
thx. i tried it, but the problem is that i could not get into edl. the com port is showing up for 1 sec and then it reboots and get into fastboot.
sp tool doesnt accept the scatter file from my rom.
is it possible to flash twrp with locked bootloader and restore it?
or is the only way to get a remote support?
thx
mozzi75 said:
thx. i tried it, but the problem is that i could not get into edl. the com port is showing up for 1 sec and then it reboots and get into fastboot.
sp tool doesnt accept the scatter file from my rom.
is it possible to flash twrp with locked bootloader and restore it?
or is the only way to get a remote support?
thx
Click to expand...
Click to collapse
It is not obvious for recent devices if the soc is not supported.
EDL mode is only for Qualcomm devices.
A few links that might be helpful:
EDIT:
Sorry but this does not apply to your device.
https://qpsttool.com/qpst-tool-v2-7-496
https://qfiltool.com/qfil-tool-v2-0-3-5
https://forum.xda-developers.com/t/stuck-in-bootloop-xiaomi-11t.4546381/
https://forum.xda-developers.com/t/bootloop-not-letting-me-access-fastboot.4520745/
See also https://www.xiaomitool.com/V2/ choose my device is bricked
thx,
so i've tried the tools.
i get into preloader state but wihout serial port so mtk stucks. Maybe its windows 11?
i also tried the xiaomi tool v2 but its horrible, cause our phone is not in recovery list (i wrote the developer to import it)
also in sp flash tool i don't get the button to bypass security
If still under warranty, send it.