Hello, I have searched the Internet for a Slingplayer app for my Slingbox solo on my Fire TV with no success. I took a chance and sideloaded several APK'S, a lot did not show the video, only sound. I found Slingplayer for tablets 3.4.0 and got it to work, with a little fiddling the quality is not bad (SD) at 2Mps on a wired network. With an Ipad mouse app and an Ipad remote control app It works, I use the Virgin Media Anytime App to change channels. I would like some feedback as to whether or not this is a new discovery or if there is a better APK for the Fire TV out there...... Thanks ....Mark
I had this version loaded on my AFS successfully. However, since I didn;t have Google Play Store, it stopped working after a while since it couldn;t validate my license.
sparkycomuk said:
Hello, I have searched the Internet for a Slingplayer app for my Slingbox solo on my Fire TV with no success. I took a chance and sideloaded several APK'S, a lot did not show the video, only sound. I found Slingplayer for tablets 3.4.0 and got it to work, with a little fiddling the quality is not bad (SD) at 2Mps on a wired network. With an Ipad mouse app and an Ipad remote control app It works, I use the Virgin Media Anytime App to change channels. I would like some feedback as to whether or not this is a new discovery or if there is a better APK for the Fire TV out there...... Thanks ....Mark
Click to expand...
Click to collapse
tekweezle said:
I had this version loaded on my AFS successfully. However, since I didn;t have Google Play Store, it stopped working after a while since it couldn;t validate my license.
Click to expand...
Click to collapse
Thanks for the apk. The error message doesn't seem to occur until I log out eventually and then doesn't let me back in so just uninstall and reinstall and works again. Isn't ideal but its just like having to log in again after each time.
These versions have worked for me thus far on AFS. The first was made for a phone and second for tablet. I use the one for the tablet as looks a little better and for me has a real remote. Only issue with the slingbox remote was the bottom half was off the screen. To bring it up, using the firestick remote, placed the mouse over the slingbox remote and moving the firestick cursor up first, then held down the firestick select button, letting go when reaches desired location. Mouse must be over the remote throughout. Stays in that position until log out.
bit.ly/2Ovmvis
bit.ly/2ypee5D
This thread is 3 and a half years old so might be a better way out there by now? Something with better quality?
There's a Slingplayer app for the Fire TV. Why aren't you using it?
Sizzlechest said:
There's a Slingplayer app for the Fire TV. Why aren't you using it?
Click to expand...
Click to collapse
the slingplayer application for firetv does not work with all slingbox models. I use the app for tablet and I have installed a version of google playstore posted in this forum. For the user interface I use an i7 Rii mini with the function of "air mouse".
1. Google Play Services 11.9.75.apk
2. Google Play Store 8.5.39.apk
3. Google Account Manager 4.4.4.apk
4. Google Gmail (Login Interface) 5.6.102685581.apk
5. SlingPlayer Free for Tablet_v1.0.1.apk
Wow, what an old thread. I mothballed my streaming boxes because cable set top boxes are becoming rare. But while I had them running, my slingbox and Vulkano boxes worked great for streaming live tv!
I downloaded the new official Fxnow App for the Fire TV, logged in and tried to play something. Everything and I mean everything that I try to play brings up a 'can't play' error. Everything else works fine on the Fire TV ( netflix, Hbogo, etc. ) and the sideloaded FXnow apk app plays everything fine using a usb keyboard, so the only thing I can think of for why the official Fxnow app isn't playing is it's out, but not supported yet. The install app wasn't easy to find. It was buried in the search area, rather than coming up as an app under app categories, and therefore my conclusion is it won't be officially active until the 2nd Gen Fire Tv is released on Oct 5th. Anyone installed the Fxnow app, registered it with their cable / sat company and found out that nothing is playable? Wanted to find out if it was a problem on my end. Can someone please confirm this?
Thanks.
Just wanted to give an update to my problem in case someone had this same issue in the future. Turns out the problem is DNS proxy related. I'm using unotelly running a geo-proxy service allowing me to watch content from the U.S and U.K using sideloaded apk files along with using kodi for U.K content. When I remove the DNS from my Amazon Fire TV configuration, the FXNOW official app works fine. The official Fxnow app is being blocked somewhere in the proxy chain. So, currently I'm inquiring if anything can be done with help from my proxy provider. If not, I'll just go back to sideloading the apk version of the app and watch FXnow that way. So, basically nothing wrong with the app. Problem is due to my setup.
Hi I am currently using a gen 2 fire TV and recently signed up to sky. I sideloaded the sky go app using the app from my note 4 and anytime I try to play something on my fire tv I get the HDMI not supported error. I saw the list of working apps thread and it said sky go does work but I always keep getting this error. Any way to solve this?? Maybe a previous version of the app can be uploaded? Any help would be great!
Most mobile apps from cable or satellite providers don't allow you to view over a wired connection. So, the first thing to try is disconnecting your Ethernet cable to the router and use WiFi only. The app should then recognize your Fire TV as a mobile device.
mirayge said:
Most mobile apps from cable or satellite providers don't allow you to view over a wired connection. So, the first thing to try is disconnecting your Ethernet cable to the router and use WiFi only. The app should then recognize your Fire TV as a mobile device.
Click to expand...
Click to collapse
My fire tv is connected through wifi
i use this apk on my aftv2 (germany)
http://www.netzwelt.de/software-download/37855-sky-go-android-apk.html
Just googled: sky go for android tv
device is connected via lan and it is working, but u need a mouse (btw. it's more easy to navigate)
I've got 2 fire tv gen 1 models running the latest sky go app ( ver 5.0.4.9) downloaded from aptoide and both Fire TV's are connected by ethernet. Everything on sky go runs fine....except for sky news. That's where I get the HDMI not supported error as well, but as far as sky sports or sky movies or anything else on sky go, everything plays fine. I'm running the app with a wireless touchpad / keyboard ( logitech ) connected using a usb dongle.
http://gavin-blake.store.aptoide.com/app/market/com.bskyb.skygo/50400000/18293366/Sky+Go
callanish said:
I've got 2 fire tv gen 1 models running the latest sky go app ( ver 5.0.4.9) downloaded from aptoide and both Fire TV's are connected by ethernet. Everything on sky go runs fine....except for sky news. That's where I get the HDMI not supported error as well, but as far as sky sports or sky movies or anything else on sky go, everything plays fine. I'm running the app with a wireless touchpad / keyboard ( logitech ) connected using a usb dongle.
can you post a link to the apk you have working please callanish as im having that hdmi not supported message on my amazon 4k fire tv yet my first generation fire tv has the same sky go version and its working
Click to expand...
Click to collapse
Hi can someone please post a working sky go apk
Guys, just install Aptoide It's not a questionable website. It's an alternative to the Google app store and works well with the fire tv. Been using it for years.
Thanks Callanish I've tried a few versions but none work I've even transferred the app from my first generation fire tv using es file explorer to my 4k fire tv and i still get the Hdmi not supported message I'll try this later
mollygeorge66 said:
Thanks Callanish I've tried a few versions but none work I've even transferred the app from my first generation fire tv using es file explorer to my 4k fire tv and i still get the Hdmi not supported message I'll try this later
Click to expand...
Click to collapse
Just guessing, but I wonder if it's an HDMI HDCP issue you're coming across due to the copyright protection handshake between the fire tv and your tv. I've got two fire TV 1st gen's running on two Sony TV's and 1 fire stick running on a Vizio bedroom tv and need to use a bluetooth keyboard / touchpad with the stick and usb wireless keyboard / touchpad for the Fire TV's in order to make skygo function properly since there's no official Fire TV version, but my only HDMI 'not supported' issue I consistently get with Skygo on the Fire TV boxes and stick is when trying to access Sky news. Every movie, sports, other channels available on Skygo work fine.....except for sky news, and like you, I get that HDMI not supported message when I try to stream it. Also using a proxy to make it all work, but I'm not experiencing a channel wide HDMI 'not supported message' in the app like you're coming across. 5.1.0.47 is the latest app version of Skygo. Hopefully it works for you or you figure out where the problem might be.
Tried this version Callanish same message hdmi not supported can't figure out what the hell the problem is I'm baffled how the hell is it working on my original fire tv set up exactly the same way but won't work on the 4k fire tv I'm totally stumped
I'm having to send it back now as i got a system update today and following the update i couldn't connect a bluetooth mouse the powerlight kept blinking or not appearing even when the fire tv was on and then the remote started going mental contacted amazon and they are sending a replacement tomorrow and added bonus I'm getting to keep the remote and they are giving me a £10 credit following the problems hopefully the new one is better
Hi Mollygeorge, how do I move files from my Amazon Fire TV stick to my new 2nd gen Amazon Fire TV?
Thanks,
Christian
Comalley2016 said:
Hi Mollygeorge, how do I move files from my Amazon Fire TV stick to my new 2nd gen Amazon Fire TV?
Thanks,
Christian
Click to expand...
Click to collapse
just open es file explorer on both the firestick and fire tv which ever has the file you want to send long press it until a tick appears and select send and it will transfer it over
Replacement 4k fire tv arrived today tried sky go again same message hdmi not supported tried it in the tv which original fire tv is and sky go is working but still getting the damn message also can anyone confirm wether the powerlight should be on when using the 4k fire tv as a light only appears when i use the remote just confused as the original fire tv powerlight is on constantly
mollygeorge66 said:
Tried this version Callanish same message hdmi not supported can't figure out what the hell the problem is I'm baffled how the hell is it working on my original fire tv set up exactly the same way but won't work on the 4k fire tv I'm totally stumped
Click to expand...
Click to collapse
So, basically what we can surmise from all this is that the Fire TV 2 boxes have aggressive HDCP copyright protection built in to prevent apps like Skygo from functioning. The options remaining, imho, are either A) purchase another Fire TV 1 box used or new if you can find one B) purchase a new Fire TV stick as it's still a version 1 device and I can vouch that it still works with Skygo 2 C) run one of the many Android boxes out there, sideload skygo and do some testing, or D) Do what I did and run a Intel Nuc; (a windows type box) or something similar, and hook it up to a usb Wireless keyboard and run skygo through a browser. That's what I use as a backup option. Yes, you could also use a computer connected with an hdmi cable to a tv, but the Intel NUC, for me, streamlines the process. Probably impractical for your needs, but just want to point out another option. The Point is, unless some other people on the forum chime in telling you that they've gotten skygo to work on the Fire TV 2, and how they've done it, then it might be time to throw in the towel on this one and think about some other options. You know Amazon and Sky are going to continue to make it harder to do what we want, so it might be better to just find a box, like the Fire TV 1 or Fire TV stick and at least get Skygo working again.
For the record, I've got my Fire Tv boxes and stick blocked for any future Amazon firmware updates. I'm thinking that Amazon could introduce an update that prevents the Fire TV 1 and Stick from working with Skygo as well, so better safe than sorry.
Thanks for the reply Callanish I'm thinking I'll just leave it as it is and wait for someone to say wether on not there's a solution for sky go on the 4k version all my other apps bt nbcsn directv play flawlessly and i can't be bothered sending it back again and setting another one up from scratch thanks for trying to help
mollygeorge66 said:
Thanks for the reply Callanish I'm thinking I'll just leave it as it is and wait for someone to say wether on not there's a solution for sky go on the 4k version all my other apps bt nbcsn directv play flawlessly and i can't be bothered sending it back again and setting another one up from scratch thanks for trying to help
Click to expand...
Click to collapse
Sorry. Wish I could have been more helpful.
sry for the 2 years late answer:
you need to set "auto" in display-settings - not 4k/1080pX0/720pX0
I forgot to block OTA updates so I'm on the latest firmware (5.2.6.3). From the many hours of googling I've done it seems it can't be rooted right now. I'm hoping somebody tells me I'm wrong there. I fudged some stuff up so I did a factory reset so I'm working from a pretty much clean install.
My main complaint really is that I hate the launcher and the UI. It's soooooo slow and clunky from the get go. I saw ways of uninstalling bloat ware and using a different launcher, but they were only for older firmware or other FTV devices. I'm totally fine with losing any Amazon apps. Nothing against Amazon I just don't need those apps.
I looked into casting instead because I saw how awesomely smooth and easy the Chromecast is to use and I really regret not getting a Chromecast. I feel like I've tried every casting receiver on the play store, and a few that weren't, with very little success. I can really only cast YouTube with AirScreen.
The Netflix app on my phone acts like it can cast to the firestick right out of the package. But when I hit the cast button on my phone it opens Netflix and loads the user selection screen. Then I have to use the remote to pick the user and the thing I wanted to watch. Defeating the purpose. It's pretty much the same story for every app that that allows me to cast to the firestick.
Sorry for writing a novel full of dumb rookie questions. I've spent a lot of time trying a lot of stuff with no success at all. I just want this thing to work better somehow. Right now I kinda wanna just install Kodi and sell it as jailbroken so I can get a Chromecast.
To cast YouTube use this app
YouTube App
Goto YouTube settings on both fire tv app & your YouTube app on phone & select watch on TV & choose to link to TV via code
Enter the code on your phone that the fire app gives you & then you can cast (the fire app must be open for the cast icon to appear)
You can cast Spotify easily by using the Spotify TV version of the app on the firestick
You can cast any video/audio/picture on your phone using allcast (playstore) and also installing the receiver app on the firestick
You can cast any video/audio from your media server (pc/laptop/nas drive) using bubbleupnp
There's no such thing as a "jailbroken" firestick
Kodi is just a media player - what you use it for is your choice - for example you can use it with bubbleupnp to create a media server on your pc to cast all videos on your pc to the firestick
TheFixItMan said:
To cast YouTube use this app
YouTube App
Goto YouTube settings on both fire tv app & your YouTube app on phone & select watch on TV & choose to link to TV via code
Enter the code on your phone that the fire app gives you & then you can cast (the fire app must be open for the cast icon to appear)
You can cast Spotify easily by using the Spotify TV version of the app on the firestick
You can cast any video/audio/picture on your phone using allcast (playstore) and also installing the receiver app on the firestick
You can cast any video/audio from your media server (pc/laptop/nas drive) using bubbleupnp
There's no such thing as a "jailbroken" firestick
Kodi is just a media player - what you use it for is your choice - for example you can use it with bubbleupnp to create a media server on your pc to cast all videos on your pc to the firestick
Click to expand...
Click to collapse
YouTube, music and videos files I own are the only things I don't need help casting. But thank you for your quick reply. They make it crazy easy to stream files from your phone/pc. I just don't have any movies or TV shows downloaded on any of my devices. I forgot to mention I have been able to stream music I have on my phone/pc no problem. And the music apps casting sends to work pretty decently.
I know there's no such thing as a jailbroken firestick. But most people think a firestick with Kodi installed is a jailbroken firestick and will pay you $10 to $20 more for it :laugh:
Hi all, I am using Dazn with a smartDNS, this works on my android tv but with the same setup on my firestick I am getting an error where it tells me to close the app to refresh video.
I have also tried with a vpn which gives the same result.
Is it possible the app can read something on the firestick to get my location which it is unable to do on the Android TV? The app works with no smartdns (but wrong region)