Hello everyone,
I ask for your help because I got an issue with my Android TV
I have a Sony KD-55XD7005 connected with ARC to my Pioneer SC 1224
I do have the control of my Home theater from the TV remote (mainly the volume), and when I turn off the TV, it turn off the AV receiver. That's OK
But when I wake the TV up (the AV wake up too), I don't have this control anymore.
I have to do one of these 3 things
-Shutdown manually the AV receiver
Or -go to the setup and choose the TV sound (it shutdown the AV) then choose HT sound (it starts the AV)
Or -reboot the TV
Then I recover the control of my AV receiver
I already tried to navigate in the sound setup, with Bravia sync and so on.. but I couldn't figure it out
I didn't find a similar case with the search bar
(Sorry for my English)
Please anyone to help me? Thx
Sony thread.......
Sony Android TV Users
Hi All, I have searched over XDA but couldn't find any appropriate place for Sony Android TV. I have got my Sony Android TV, KDLW800C, couple of days ago. Sony has just started to ship out 4K and 2K Android TV's. From the interface, it's almost...
forum.xda-developers.com
Related
So i bought a HDMI Cable for my Arc S and connected everything
its working fine and shows the screen on the tv, but when i open the
3D Gallery it goes into the 3D mode and says, i have to control with
the tv remote from now on.The problem is when i press something
on the remote i cant control anything on the phone and cant
watch my 3d panorama pics. I have a LG-LW45 Series TV
anyone who can control the gallery with the remote?
There should be a setting somewhere in TV's menu for allowing control of phone using remote. You need to turn it on!
the feature advertised by lg should be simplink,
but when i press the simplink button on the remote it doesnt seem to
find any controllable devices
Buy a Sony Bravia TV?
Simplink is just like SCART used to do, switch to the right channel when a device (dvd player) is turned on and it should be able to control the device, but that probably only works with LG devices.
What you need to control your arc is CEC (Consumer Electronics Control)
LG describe simplink as "hdmi- cec", good luck!
Sent from my Xperia Arc using xda premium
i have a sony HT-XT1 soundbar and ive had an amazon tv connected to it and a blu ray player , all has been working fine , then all of a sudden the sound for the tv channels wont come through the soundbar , but if i unplug the hdmi from the amazon tv , then sound for the tv channels comes through the soundbar , but when i plug the hdmi cable back into the amazon tv , i get a message on screen saying audio communication error . Why has this just started to occur and how do i fix the problem ? im n the uk , but the atv is from the USA , could that be something to do with it ? thanks
davemaden said:
i have a sony HT-XT1 soundbar and ive had an amazon tv connected to it and a blu ray player , all has been working fine , then all of a sudden the sound for the tv channels wont come through the soundbar , but if i unplug the hdmi from the amazon tv , then sound for the tv channels comes through the soundbar , but when i plug the hdmi cable back into the amazon tv , i get a message on screen saying audio communication error . Why has this just started to occur and how do i fix the problem ? im n the uk , but the atv is from the USA , could that be something to do with it ? thanks
Click to expand...
Click to collapse
Try disabling HDMI-CEC on your bluray player and your tv or if they are already disabled maybe try enabling them.. Different companies tend to call this different things...
AOC: E-link
Hitachi: HDMI-CEC
LG: SimpLink
Mitsubishi: NetCommand for HDMI
Onkyo: RIHD (Remote Interactive over HDMI)
Panasonic: HDAVI Control, EZ-Sync, or VIERA Link
Philips: EasyLink
Pioneer: Kuro Link
Runco International: RuncoLink
Samsung: Anynet+
Sharp: Aquos Link
Sony: BRAVIA Sync
Toshiba: CE-Link or Regza Link
Vizio: CEC
i have tried altering settings but still the same problems , now when i connect the hdmi lead to the atv , the sound on the tv channels , stutters every few seconds , even if the atv is unplugged at the mains , is the soundbar faulty , as ive tried different hdmi leads and the same thing happens if i connect an apple tv 2 , even if thats not plgged in at the mains ? thanks
Change the resolution setting on the FireTV from auto to a fixed setting e.g 1080p 60Hz.
The communication error will magically be fixed.
It seems Amazon's Auto resolution function doesn't play nicely with Sony's CEC implementation.
Hi there, I have a problem with this fire tv stick, when I do display mirroring from my android smartphone (sony xperia), the screen works well but no sound at all, not a single sound from that. I tried changing the audio setting (dolby on, off, dolby plus and that thing) with no solution and the correct wifi configuration too. Maybe the the insufficient power source? (well, the stick didn't show any power dialog on my tv) or the latest firmware installed? or the blocked ota update on router? or internet speed?
I don't know what to try next, I tested on two devices with the same result and pc can't recognize this tv stick.
Any idea what to do?
Or another way to cast screen mirroring or chromecast receiver app? (I tried youmap but it doesn't work).
Hello,
Help needed please, I have a 4 years old Philips 55PUS7909/12 Smart TV. since yesterday, I cannot anymore control the TV: when using the remote control and the rear joypad button, the red led blinks but TV does not repond to any comand. Cannot change source, volume, enter the menu... The only thing I can do is plug and unplug the power cable to power on/off the TV.
When TV powers on, I see philips logo, then video and sound work perfectly on HDMI 1 input But then nothing else works, cannot switch to other HDMI or to TV cable since joypad/remote control are not working.
I have tried to use philips MyRemote app on my smartphone but it does not find the TV anymore, like if TV is not connected to WIFI.
Any clue please?
Hi,
MyRemote is the wrong app - try TV Remote App...
Try to connect an USB Keyboard... maybe some keys are working...
[email protected]
Hello,
I finally used recovery mode to:
1- wipe all data
2- reinstall the firmware copied from philips support site to a usb key.
Joypad is now working, remote control also, but when I press Home or source buttons, TV displays the "waiting/progress circle" like it is trying to display something but finally nothing happens.
I dont know, maybe a hardware issue is causing issues but I cannot identify it for now.
One question, after wipe and firmware reinstallation, I found back my old HDMI source names and icons, like if some parts were not wiped. Am I doing something wrong?
Hi!
I have a TCL BeyondTV2 (C715) and a Harman Kardon AVR 171s, that has HDMI ARC capability. My brother who owned the system before used it without problem with a Sony Bravia TV (I don't know the exact model) through HDMI ARC. (I think he only had an issue that the AVR could not turn on with CEC only off, but I think he just misconfigured it)
Now I have the AVR and tried to use it with my TCL C715 through ARC, but with no luck. I have all CEC and everything set up, and it is works... for about 10 minutes, when the TV switches back to speakers, and TV remote stops to relay volume up and down controls to AVR. If I switch the input on the AVR from HDMI to something else and back, sometimes it comes back for another 5-10 minutes.
If I use the AVR with S/PDIF the audio is fine, but obviously I cannot control it with my TV remote so, I have to use 2 remotes and separately switch on everything. It is annoying
I recently updated the TV's system to V8-R851T02-LF1V715.000032, but it did not fixed the issue.
I think i have the latest update on the AVR.
Did someone encountered this problem? Does anybody have ideas how I could debug this? I did not find any related posts on the forum, but maybe I missed one. I have ADB set up, so if there is a way to get logs I would be happy to (I did not see anything with logcat, but maybe I used it incorrectly)
Any ideas appreciated!