Related
Original thread for Nexus 6P is located here:
http://forum.xda-developers.com/nex...t/xthermal-mod-fast-charging-cpu-gpu-t3433784
Hi Guys,
After a very successful journey from Redmi 1s to Nexus 6P, I'm now here with my Xthermal Mod for Mi 5.
I'm personally testing the mod since a week and will be rolling out all the profiles soon.
Till then I need your help to test it out in different conditions.
Please join and help me to make it more better this time.
I'm attaching Fast Charge only profile as of now.
Edit: Xthermal Performance + Back to stock added...
baszu said:
I've tried this with MIUI 8 (6.9.29), but Ampere still showing only 1500.
Click to expand...
Click to collapse
1. Stock charger supports max 2000 mah.
2. Max Charging current is controlled by the Kernel itself.
As soon as battery level increases the charging current goes down.
You might have observed that if battery level is below 50% then charging is super fast but after 60% it is very slow.
If you (your apps) do not use the handset resources much while charging then you do not need this mod.
If you use your handset while charging (which is strongly not recommended) example for gaming, browsing or chatting etc then the temperature rises slowly slowly.
The stock limits are very aggressive and it starts throttling and your cpu, gpu and charging speeds goes down.
So this mod comes into play here and delays the throttling a bit resulting in better cpu, gpu and charging results.
Does it produces more heat?
Heat is directly related with performance. This mod itself doesn't produce any heat but yes delaying the throttling means the handset is able to use all your resources even if temps rises hence may result in a bit more heat + more performance.
The results are more amazing if you have a fast charger.
I believe there is no risk in flashing this but still don't blame me for all your actions.
******************OTA doesn't break after flashing the zips***************
contact me:
telegram @ravinder0003
email [email protected]
Thanks
Reserved
Is there any requirements? Miui? Cm? Kernel?
Please upload the "back to stock" for mi 5. Thanks
I don't see "thermal-engine-8996.conf" file in my rom. Assume I can just delete the file (or re-install rom) to revert to default.
By the way, do you know what's default value for each before this mod? Hope this mod not increase the threshold too much. Worry it will boom.
I've read original thread, what I understand is our phone will charge faster but trade off with hotter while charging.
D:\adb>adb shell "su -c 'ls -l /system/etc/themal*'"
/system/etc/themal*: No such file or directory
Click to expand...
Click to collapse
fuxmen said:
Is there any requirements? Miui? Cm? Kernel?
Click to expand...
Click to collapse
I'm using this with miui 8...
I haven't gone through cm ...
So as of now miui 8 only...
Will flash cm tomorrow and will.update the zip...
hiepthong said:
Please upload the "back to stock" for mi 5. Thanks
Click to expand...
Click to collapse
Ok wait bro
I've tried this with MIUI 8 (6.9.29), but Ampere still showing only 1500.
Waithing performance profile
op updated...
waiting for perfomance profile + fast charging .
kmzway000 said:
waiting for perfomance profile + fast charging .
Click to expand...
Click to collapse
Added to op...
Thx for supporting
Is this the mod with both fast charging and xtreme performance baked in?
Can i flash both of them at once?
northropgrummanrq180 said:
Is this the mod with both fast charging and xtreme performance baked in?
Click to expand...
Click to collapse
Yupp...
Fast charge is there in every zip except in back to stock which have stock file...
hiepthong said:
Can i flash both of them at once?
Click to expand...
Click to collapse
No need to flash both as fast charge is there in performance zip too...
Just flash performance zip.on miui 8 6.9.29 i feel the phone faster then before,fast charging work good,just for test from 20%to100% 50min.Good joob
Just flashed it too. Phone seems much faster will see about charging and battery drainage but I prefer faster phone over battery always
Would you mind explaining technically what those mods do? e.g.: governor, upper and lower frequency limit, etc. Some of us like to know the geeky details
@leledumbo
Read the op bro...
If u need more info then do ping me or contact me on telegram ...
Hi guys,
i have some unnormal battery life.
Me and my gf play Pokemon Go and when we go out and use the same Battery Pack (some Anker with 10.000mAh with an Android Port and a Apple port - maybe not QC 2.0 but at least 1A output) the iPhone is charging up slowly and my G4 is draining slowly (or fast.... i would say so fast that the usage of ext battery wouldnt be of much weight).
How can i improve this?
Away from stock kernel / rom ? I want 100% realiability in software, i don't want bugs, like camera not working - that's not worth it (for me). Or small things like Infrared (love that ****).
Can you give me some Apps or "helpers" or prewritten tutorial / thoughts how to improve my situation?
Or even tips on kernels and roms.
Thanks in advance
Hi guys,
i have some unnormal battery life.
Me and my gf play Pokemon Go and when we go out and use the same Battery Pack (some Anker with 10.000mAh with an Android Port and a Apple port - maybe not QC 2.0 but at least 1A output) the iPhone is charging up slowly and my G4 is draining slowly (or fast.... i would say so fast that the usage of ext battery wouldnt be of much weight).
How can i improve this?
Away from stock kernel / rom ? I want 100% realiability in software, i don't want bugs, like camera not working - that's not worth it (for me). Or small things like Infrared (love that ****).
Can you give me some Apps or "helpers" or prewritten tutorial / thoughts how to improve my situation?
Or even tips on kernels and roms.
Thanks in advance
You should have mentioned your device info .
rajkatiyar07 said:
Hi guys,
i have some unnormal battery life.
Me and my gf play Pokemon Go and when we go out and use the same Battery Pack (some Anker with 10.000mAh with an Android Port and a Apple port - maybe not QC 2.0 but at least 1A output) the iPhone is charging up slowly and my G4 is draining slowly (or fast.... i would say so fast that the usage of ext battery wouldnt be of much weight).
How can i improve this?
Away from stock kernel / rom ? I want 100% realiability in software, i don't want bugs, like camera not working - that's not worth it (for me). Or small things like Infrared (love that ****).
Can you give me some Apps or "helpers" or prewritten tutorial / thoughts how to improve my situation?
Or even tips on kernels and roms.
Thanks in advance
You should have mentioned your device info .
Click to expand...
Click to collapse
Yeah ... G4 ? Am I not in the G4 Thread?
European version H815 , carrier free - of course. Android 6.0.1
What difference in G4s does it make in the end?
V3r0x said:
Yeah ... G4 ? Am I not in the G4 Thread?
European version H815 , carrier free - of course. Android 6.0.1
What difference in G4s does it make in the end?
Click to expand...
Click to collapse
Ask google to know the differences . All i can say you own 815 . You can unlock bootloader . Other users cant. Thats the major difference . You can flash recoveries , roms mods etc etc . We cant ! thats why i asked you the device model. GO into the development section http://forum.xda-developers.com/g4/development you can find plenty of options there .
And next time dont be mean if someone trying to help you . Yes i have seen guys here posting questions and infos in wrong device sections. After all everyone is noob here in early days .
fuH Kernel is a custom kernel for Nokia 8 (NB1) running Android 9 Pie, based on official HMD sources.
I am not responsible for any software damage, lost files, dead Nokias, rusted Civics, thermonuclear war and rotten bananas. YOU ARE INSTALLING THIS KERNEL ON YOUR OWN RESPONSIBILITY!
Click to expand...
Click to collapse
##############################
Features 26/6/2022
##############################
- NTFS R/W support
- F2FS R/W support
- schedutil governor
- CPU Overclock and Underclock (from 175MHz up to 2,6GHz for big cluser, and up to 2,1GHz for little cluster!)
- GPU Overclock (up to 850MHz)
-KCal support
- Magisk 24.1
- OrangeFox Recovery
##############################
Requirements
##############################
- A working driver for your device.
- Unlocked bootloader
- Latest Android update (from october 2020)
##############################
Installation Instructions
##############################
- adb devices
- adb reboot bootloader
- fastboot devices
- fastboot flash boot fuHKernel_by_zbieracz2000_300622.img
- fastboot reboot
Click to expand...
Click to collapse
- ENJOY!
Download:
http://aligstor.pl/files/fuHKernel_by_zbieracz2000_300622.img
Source:
https://github.com/zbieracz2000/fuHKernel-NB1
Base source:
https://www.nokia.com/phones/en_int/opensource/
Thx dude! I'll try it as soon as I can.
small feature request though: Can you implement voltage control? might be useful to prevent thermal throttling.
Ayhem-GH said:
Thx dude! I'll try it as soon as I can.
small feature request though: Can you implement voltage control? might be useful to prevent thermal throttling.
Click to expand...
Click to collapse
That's actually one of the features I'm currently working on
i was waiting for this thank you
I've just added support for KCal, and extended GPU OC up to 850MHz
Hello. This will not be ported to A12 builds, right?
TechNoobForSale said:
Hello. This will not be ported to A12 builds, right?
Click to expand...
Click to collapse
It will be in the future
zbieracz2000 said:
It will be in future
Click to expand...
Click to collapse
Are you God?
zbieracz2000 said:
It will be in the future
Click to expand...
Click to collapse
Brooooo do it ASAAP
MADY PLAYS said:
Brooooo do it ASAAP
Click to expand...
Click to collapse
Admittedly many people are using A12 Treble ports, me included. Stock is a very unfair ROM, because for example it caps big at 2.36GHz instead of the advertised 2.45.
Furthermore, there isn't really a good Kernel on A12 NB1 ROMs. They all underperform compared to stock. So zbier has the power to change a world in his hands.
The issue with this Kernel is that when I try to use 2592MHz big, as soon as I open an app, max goes back to 2361. Little cores do listen but when opening an app, they always boost to 2112 regardless of the limit I set. Maybe this is MPDecision problem?
Also GPU overclock brings no improvement at all over stock 710MHz
TechNoobForSale said:
The issue with this Kernel is that when I try to use 2592MHz big, as soon as I open an app, max goes back to 2361. Little cores do listen but when opening an app, they always boost to 2112 regardless of the limit I set. Maybe this is MPDecision problem?
Also GPU overclock brings no improvement at all over stock 710MHz
Click to expand...
Click to collapse
What app do you use? It works perfectly on EX Kernel Manager
zbieracz2000 said:
What app do you use? It works perfectly on EX Kernel Manager
Click to expand...
Click to collapse
Smart pack Kernel manager. I also tried Franco Kernel manager and the phone still doesn’t listen. I’ll try EX.
Still nothing. Big cpu goes back to 2361MHz whenever I open any other app after the kernel manager. GPU at 850MHz no performance improvement
On Schedutil governor the big CPU overclock "works"
What I mean with works is that the frequency does go above 2361MHz stock, but it doesn't ACTUALLY reach 2592. It simply reaches the max stock limit for MSM8998, which is 2457MHz and has been capped to 2361MHz on Nokia 8. I noticed from the Geekbench scores.
GPU doesn't OC at all. 850MHz = 710MHz and 770MHz = 670MHz. The system is ignoring the values.
@TechNoobForSale
Can you confirm whether fast charging works for you on this kernel? I have tried both fuHKernel and Umbrella kernels but neither of them seem to charge more than 1.1A with a Quick Charge 3.0 plug. When I previously used Treble custom ROMs I could charge at the full 3A maximum.
P650SE said:
@TechNoobForSale
Can you confirm whether fast charging works for you on this kernel? I have tried both fuHKernel and Umbrella kernels but neither of them seem to charge more than 1.1A with a Quick Charge 3.0 plug. When I previously used Treble custom ROMs I could charge at the full 3A maximum.
Click to expand...
Click to collapse
Can't confirm or deny. Mine charges at 1.4A off of a powerbank. This Kernel is essentially stock Kernel but with "Overclock" (not really, it's just stock Kernel with an ATTEMPT to overclock).
Try different plugs.
TechNoobForSale said:
Can't confirm or deny. Mine charges at 1.4A off of a powerbank. This Kernel is essentially stock Kernel but with "Overclock" (not really, it's just stock Kernel with an ATTEMPT to overclock).
Try different plugs.
Click to expand...
Click to collapse
Alright, thanks. I have actually retested just now using a dedicated USB voltage tester with a different plug and cable. Here are my findings: With a standard 2.4A non-Quick Charge charger it charges at 1.4A which is the same as what you're getting from the powerbank. If I use my Qualcomm charger it increases slightly to 1.5A. This is still half of the 3A speed I was getting on the custom ROMs.
I will try reflashing the stock kernel and see if there's any difference. Otherwise, I have no idea why I am not able to achieve the full charging speed anymore.
In fact, the only reason I use the custom kernel is for KCAL colour adjustment. Because my phone has a third-party replacement LCD and I have to use kernel adjustment to increase the saturation. I'm not fussed about the overclocking or performance enhancements.
P650SE said:
Alright, thanks. I have actually retested just now using a dedicated USB voltage tester with a different plug and cable. Here are my findings: With a standard 2.4A non-Quick Charge charger it charges at 1.4A which is the same as what you're getting from the powerbank. If I use my Qualcomm charger it increases slightly to 1.5A. This is still half of the 3A speed I was getting on the custom ROMs.
I will try reflashing the stock kernel and see if there's any difference. Otherwise, I have no idea why I am not able to achieve the full charging speed anymore.
In fact, the only reason I use the custom kernel is for KCAL colour adjustment. Because my phone has a third-party replacement LCD and I have to use kernel adjustment to increase the saturation. I'm not fussed about the overclocking or performance enhancements.
Click to expand...
Click to collapse
The reason I’m using custom kernel is because being locked at 2361MHz instead of getting what 835 was rated for was making me angry. Also I wanted frequency control.
I think that maybe Nokia 8 doesn’t support QuickCharge 3.0 which is why it doesn’t manage 3A. Probably a thing introduced by A12/A11 ROMs, I used to use them but I reverted back to stock partition table because they perform worse.
TechNoobForSale said:
The reason I’m using custom kernel is because being locked at 2361MHz instead of getting what 835 was rated for was making me angry. Also I wanted frequency control.
I think that maybe Nokia 8 doesn’t support QuickCharge 3.0 which is why it doesn’t manage 3A. Probably a thing introduced by A12/A11 ROMs, I used to use them but I reverted back to stock partition table because they perform worse.
Click to expand...
Click to collapse
Yeah I think you're perhaps right. It's probable the Nokia 8 doesn't even officially support Quick Charge despite having the capabilities to do so. It's been so long since I used the stock ROM that I don't remember. It doesn't state anything about QC on the phone's box.
I tried switching off the phone completely and retesting the charging speed in offline mode (without booting Android) which gives the same speed of around 1.4A. So I guess that confirms it is nothing to do with the kernel.
I agree it's frustrating that the clock speed is limited in the stock kernel. I don't understand why they do that. The reason I switched back to stock ROM is mainly due to the WiFi signal. In the custom ROMs the signal is terrible and constantly disconnects from the router. I don't have this issue in stock ROM. I also hate the Material You redesign in A12 and refuse to upgrade to that version.
I'm looking for rom that have smart charging feature built in rom, is there any rom that still have that feature other than Crdroid 11 ?
jamesreidkwel said:
smart charging
Click to expand...
Click to collapse
What's that supposed to be anyway?
Couldn't find much at
https://github.com/crdroidandroid/crdroid_features
SigmundDroid said:
What's that supposed to be anyway?
Couldn't find much at
https://github.com/crdroidandroid/crdroid_features
Click to expand...
Click to collapse
The capability to set to charge only till 80%. Have read in TG that this feature was dropped, due to the danger of getting the device bricked because of her. There's a post explaining why here in xda, made by arrow dev.
You can root your phone with Magisk and get the Magisk Module "Advanced Charging Controller".
Then, in a Terminal, you do "sudo acc 80" to make it stop charging @ 80%.
jamesreidkwel said:
I'm looking for rom that have smart charging feature built in rom, is there any rom that still have that feature other than Crdroid 11 ?
Click to expand...
Click to collapse
Sorry for being a bit late to the party, as cyanGalaxy quoted, you can use "ACCA", it requires Root, check out my post,
QI Wireless Charging Receiver for the Poco F3 (TESTED WORKING)
I have been a fan of wireless charging for many years since my LG G4, with the optional, QI charging rear case, As the F3 lacks QI charging, i have been struggling to find a compatible charging receiver, after buying 2 incompatible charging...
forum.xda-developers.com
I have only found 2 roms with this feature, crDroid 9.0 and the rom i use, the
AMAZING Evolution-X 7.4,
Smart Charging works GREAT on this rom
Try miuivn. It has smart charging pre-enabled. it is based on miui 14 (chinese) and android 13 official. Im using it as a daily driver and havent seen any bugs yet.
bangash110 said:
Try miuivn. It has smart charging pre-enabled. it is based on miui 14 (chinese) and android 13 official. Im using it as a daily driver and havent any bugs yet.
Click to expand...
Click to collapse
Hi,
Is the Smart charging feature the same as this
johnr64 said:
Hi,
Is the Smart charging feature the same as this
Click to expand...
Click to collapse
Smart charging is known as optimized charging in miui chinese based roms.
bangash110 said:
Smart charging is known as optimized charging in miui chinese based roms.
Click to expand...
Click to collapse
Are you able to customise the maximum charge level as with Evolution-X,
I like to charge my F3 between 35% and 65%,
this lasts me around 8 hrs and only generates 0.03 cycles,
this will hopefully keep my battery in tip top condition.
johnr64 said:
Are you able to customise the maximum charge level as with Evolution-X,
I like to charge my F3 between 35% and 65%,
this lasts me around 8 hrs and only generates 0.03 cycles,
this will hopefully keep my battery in tip top condition.
Click to expand...
Click to collapse
There is no built-in option for that but there are automated tasks you can set for that I guess. I also never have used Accu Battery app.
bangash110 said:
There is no built-in option for that but there are automated tasks you can set for that I guess. I also never have used Accu Battery app.
Click to expand...
Click to collapse
Hi,
I`ve been looking for many years for a rom with the "Smart Charge" feature, i have only found two for the F3, Evo-x and crDROID,
i used to use ACCA until Evo-X came along, i am always on the look out for roms with this feature to see how it compares.
I brought my F3, New 14 months ago and it still has 95% of the battery capacity left according to ACCU.
I try to minimise the battery cycles and phone temperature,
hopefully by doing this it will keep my Battery in Tip Top condition.
bangash110 said:
Smart charging is known as optimized charging in miui chinese based roms.
Click to expand...
Click to collapse
What rom is this? Xiaomi.eu?
LilBlinx said:
What rom is this? Xiaomi.eu?
Click to expand...
Click to collapse
No this rom is called miuivn.
There's already some roms with it. But most of the maintainers aren't including it, because it can bring issues.
Anyway, I when I'm not in a rom with Smart charge, I always use a app called "battery charge limit". Super lightweight that allows to smart charge.
lapirado said:
There's already some roms with it. But most of the maintainers aren't including it, because it can bring issues.
Anyway, I when I'm not in a rom with Smart charge, I always use a app called "battery charge limit". Super lightweight that allows to smart charge.
Click to expand...
Click to collapse
Hi,
Yes i also read about Charging Issues regarding Smart Charging, before i switched to Evo-X, i used ACCA and this was good, but i think it`s better to have this feature built in.
There were post regarding dead phones ect using the smart charge function,
yet i used ACCA for 10 months without any issues before switching to EVO.
If possible could you link to "Battery Charge Limit" as I'm not aware of this app,
cheers.
johnr64 said:
Hi,
Yes i also read about Charging Issues regarding Smart Charging, before i switched to Evo-X, i used ACCA and this was good, but i think it`s better to have this feature built in.
There were post regarding dead phones ect using the smart charge function,
yet i used ACCA for 10 months without any issues before switching to EVO.
If possible could you link to "Battery Charge Limit" as I'm not aware of this app,
cheers.
Click to expand...
Click to collapse
Hello buddy. Yeah I think we already have discussed that on other post. Supposedly it could bring serious issues to pmic controller.
But I used it around 3 years on my previous device (oneplus 3), without any issue. And now I've been using on poco, without any problems too. But well, I'm aware that someday it could turn bad.
I can't find on internet, but it's available on TG - https://t.me/RohailsHub/794.
If you prefer I can upload the apk.
lapirado said:
Hello buddy. Yeah I think we already have discussed that on other post. Supposedly it could bring serious issues to pmic controller.
But I used it around 3 years on my previous device (oneplus 3), without any issue. And now I've been using on poco, without any problems too. But well, I'm aware that someday it could turn bad.
I can't find on internet, but it's available on TG - https://t.me/RohailsHub/794.
If you prefer I can upload the apk.
Click to expand...
Click to collapse
If you could uploaded it that would be great help , i normally use pixeldrain
cheers.
johnr64 said:
If you could uploaded it that would be great help , i normally use pixeldrain
cheers.
Click to expand...
Click to collapse
Here
Some custom ROMs that have smart charging feature built-in include:
AOSiP ROM
Evolution X ROM
Paranoid Android ROM
Please note that the availability and functionality of these features may vary depending on your device and the version of the ROM you are using. It's recommended to check the ROM's official XDA thread or the Github repository for more information.
lapirado said:
Here
Click to expand...
Click to collapse
Hi,
Just a small update regarding "Smart Charging", I had to revert back to ACCA, as i use a QI Wireless receiver/adaptor to charge my phone most of the time and found that when QI charging my battery temperature was getting worryingly high,
at one point it reached 40.5 degrees, yet when using a standard charger my battery was fine.
I tried the app that you uploaded (Many thanks) but it looked very similar to ACCA except it had less functionality, i also found an (almost) identical Program on the play store.
So for now i have disabled the "SMART CHARGING" function in the Evo-X rom and reverted back to ACCA, as i am able to set the charge temperature.
I have set it to stop charging at 35 degrees and resume at 30 degrees,
I have also ordered a replacement QI Receiver to see if it resolves my issue.
Hello guys. My Redmi Note 8 phone had a slow charging problem, I solved the problem by installing the Ryzen kernel, but then the fast charging feature was turned off. I activated fast charging in Orange Fox settings, but it did not improve, I installed a fast charging module with Magisk and it still did not work. Is there a kernel version you can recommend guys? Thanks in advance for your help. MIUI miuimix 12.5.4 Stable Rom Android 11 Ryzen Kernel 4.14.256
Recommend some Kernels that support fast charging on Chinese variant.
There are lots of Kernel support fast charging on Chinese variant, A11-A13. Meow, Lighting, Cara, Cryo, and so on. All of them active on Telegram, but just a few of them post on XDA. I don't know why. In case someone need fast charging on...
forum.xda-developers.com