Original thread for Nexus 6P is located here:
http://forum.xda-developers.com/nex...t/xthermal-mod-fast-charging-cpu-gpu-t3433784
Hi Guys,
After a very successful journey from Redmi 1s to Nexus 6P, I'm now here with my Xthermal Mod for Mi 5.
I'm personally testing the mod since a week and will be rolling out all the profiles soon.
Till then I need your help to test it out in different conditions.
Please join and help me to make it more better this time.
I'm attaching Fast Charge only profile as of now.
Edit: Xthermal Performance + Back to stock added...
baszu said:
I've tried this with MIUI 8 (6.9.29), but Ampere still showing only 1500.
Click to expand...
Click to collapse
1. Stock charger supports max 2000 mah.
2. Max Charging current is controlled by the Kernel itself.
As soon as battery level increases the charging current goes down.
You might have observed that if battery level is below 50% then charging is super fast but after 60% it is very slow.
If you (your apps) do not use the handset resources much while charging then you do not need this mod.
If you use your handset while charging (which is strongly not recommended) example for gaming, browsing or chatting etc then the temperature rises slowly slowly.
The stock limits are very aggressive and it starts throttling and your cpu, gpu and charging speeds goes down.
So this mod comes into play here and delays the throttling a bit resulting in better cpu, gpu and charging results.
Does it produces more heat?
Heat is directly related with performance. This mod itself doesn't produce any heat but yes delaying the throttling means the handset is able to use all your resources even if temps rises hence may result in a bit more heat + more performance.
The results are more amazing if you have a fast charger.
I believe there is no risk in flashing this but still don't blame me for all your actions.
******************OTA doesn't break after flashing the zips***************
contact me:
telegram @ravinder0003
email [email protected]
Thanks
Reserved
Is there any requirements? Miui? Cm? Kernel?
Please upload the "back to stock" for mi 5. Thanks
I don't see "thermal-engine-8996.conf" file in my rom. Assume I can just delete the file (or re-install rom) to revert to default.
By the way, do you know what's default value for each before this mod? Hope this mod not increase the threshold too much. Worry it will boom.
I've read original thread, what I understand is our phone will charge faster but trade off with hotter while charging.
D:\adb>adb shell "su -c 'ls -l /system/etc/themal*'"
/system/etc/themal*: No such file or directory
Click to expand...
Click to collapse
fuxmen said:
Is there any requirements? Miui? Cm? Kernel?
Click to expand...
Click to collapse
I'm using this with miui 8...
I haven't gone through cm ...
So as of now miui 8 only...
Will flash cm tomorrow and will.update the zip...
hiepthong said:
Please upload the "back to stock" for mi 5. Thanks
Click to expand...
Click to collapse
Ok wait bro
I've tried this with MIUI 8 (6.9.29), but Ampere still showing only 1500.
Waithing performance profile
op updated...
waiting for perfomance profile + fast charging .
kmzway000 said:
waiting for perfomance profile + fast charging .
Click to expand...
Click to collapse
Added to op...
Thx for supporting
Is this the mod with both fast charging and xtreme performance baked in?
Can i flash both of them at once?
northropgrummanrq180 said:
Is this the mod with both fast charging and xtreme performance baked in?
Click to expand...
Click to collapse
Yupp...
Fast charge is there in every zip except in back to stock which have stock file...
hiepthong said:
Can i flash both of them at once?
Click to expand...
Click to collapse
No need to flash both as fast charge is there in performance zip too...
Just flash performance zip.on miui 8 6.9.29 i feel the phone faster then before,fast charging work good,just for test from 20%to100% 50min.Good joob
Just flashed it too. Phone seems much faster will see about charging and battery drainage but I prefer faster phone over battery always
Would you mind explaining technically what those mods do? e.g.: governor, upper and lower frequency limit, etc. Some of us like to know the geeky details
@leledumbo
Read the op bro...
If u need more info then do ping me or contact me on telegram ...
Related
NEW CONFIGURATION
OF STOCK JB KERNEL
Hi guyz, since i don't like the default parameters of stock JB kernel,
i'm trying to use my own one witch i could have little less power usage
with hight tasks like web browsing or gaming.
Click to expand...
Click to collapse
HOW IT WORKS?
Simply, it decrease the cpu ramping up to maxfreq to preserve
a lower voltages of the SoC, it means, less power usage.
In fact, MilliAmpere used are less.
HOW TO FLASH?
REALLY?!? :silly:
Flash it as a normal ROM.
####################
You could have issues
Enjoy and, if you like, rate 5 stars
and sure, FEEDBACKS me!!
It's an order!
It should works with all SENSE JB roms.
P.S. 5 mins of usage isn't a test,
2 days from a complete charge to a complete
discharge are that, and sure, WITH THE SAME USAGE!!
An Example
Click to expand...
Click to collapse
Click to expand...
Click to collapse
:good::laugh:
FAQ
- What about this MOD?
It's a script witch changes Ondemand's parameters
- Could damage my phone?
ABSOLUTELY NO! why? because it's only a script witch write some numbers, after a reboot, numbers comes to stock setting if MOD will be removed
- Is it invasive for my rom?
ABSOLUTELY NO! it doesen't change anything in system files, only write some numbers in governor's parameters, those returns at stock value after 1 reboot (if you delete the mod)
- Should i have little lags?
Yes, you could, because this setting decrease the ramp up of the cpu, it means, less frequency = less power usage.. but.. means less performance too!
- Is it a mod for hardcore gaming?
No, i create that only for normal dalily use + web browsing, you should have little lags!
- I have some issues after installing this mod, what about it?
Since this only changes some values, the ONLY thing you could have is a lagghing phone, other issues are rom fault (or maybe your fauilt)
- I have choppy youtube videos, what could i do?
Nothing, don't know why but, probably, youtube needs 1.5ghz of core, and, this mod decrease the ammount of time spent at that frequency. It's an nvidia hotplug error, it should turn on 4 core at low freq, but, it doesn't do, so, for now, don't know what we could do to fix it! Need the source code of kernel!
- I don't like your mod, how to remove?
Flash the remove zip file and fuk off! (ahahahahaha )
WOULD YOU LIKE TO ADD MY MOD IN YOUR OWN ROM?
For me, it's ok, but, my opinion, some users has issues with gaming and youtube playback, so, if you FORCE ths mod to him, you could lose credibility!
This mod decrease the benchamrks results too! So, my advice is to ADD THIS THREAD LINK IN YOUR ROM'S THREAD WITCH YOU ADVICE TO TRY MY MOD!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
IMPRESSIONS
http://forum.xda-developers.com/showpost.php?p=36581027&postcount=17
http://forum.xda-developers.com/showpost.php?p=36635073&postcount=46
http://forum.xda-developers.com/showpost.php?p=37024116&postcount=194
http://forum.xda-developers.com/showpost.php?p=37124724&postcount=226
http://forum.xda-developers.com/showpost.php?p=37089623&postcount=216 WOW!!!
http://forum.xda-developers.com/showpost.php?p=37339986&postcount=311
Click to expand...
Click to collapse
Click to expand...
Click to collapse
:good::good:
good looking forward to how it works!
Nice!! Will try this thanks
Should it works with viper rom?
Sent from my HTC One X
paroys said:
Should it works with viper rom?
Sent from my HTC One X
Click to expand...
Click to collapse
as you see in my signature, i'm using it in viperX!
DiederikC said:
good looking forward to how it works!
Click to expand...
Click to collapse
Simply change and force some parameters setting of the ondemand governor
I did it to preserve the ramp up of the cpu to maxfreq, it means less power usage
http://www.imgur.com/mZzyO.png
YOU COULD HAVE LITTLE LAGS! COULD!
iba21 said:
Simply change and force some parameters setting of the ondemand governor
I did it to preserve the ramp up of the cpu to maxfreq, it means less power usage
http://www.imgur.com/mZzyO.png
YOU COULD HAVE LITTLE LAGS! COULD!
Click to expand...
Click to collapse
flash!!! And let it run few hours
Sent from my HTC One X
paroys said:
flash!!! And let it run few hours
Sent from my HTC One X
Click to expand...
Click to collapse
You'll see the difference in a completely day, if you already uses the phone, you don't have a completely charge, and the % of battery is calculated and not real. What i would say?
Simply, decrease from 100 to 90 isn't the same as 20 to 10%!
You'll see in a completely day with a completely charge
iba21 said:
You'll see the difference in a completely day, if you already uses the phone, you don't have a completely charge, and the % of battery is calculated and not real. What i would say?
Simply, decrease from 100 to 90 isn't the same as 20 to 10%!
You'll see in a completely day with a completely charge
Click to expand...
Click to collapse
Thanks bro...!!! I will report later,
Sent from my HTC One X
Testing in Ordroid
Enviado desde mi HTC One X usando Tapatalk 2
Hi iba, what real benefit can bring your MOD. We have battery saver in JB and his function is the same as your mod or is there some diference?
Sent from my HTC One X using xda premium
huniak said:
Hi iba, what real benefit can bring your MOD. We have battery saver in JB and his function is the same as your mod or is there some diference?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
this function has a similar effect, the different is i'm using another parameter
the difference is, with my mod, the most hight freq witch is used is 1.2, but 1.4 and 1.5 will used too, if those are real necessary
with normal battery saver force to max 1.3ghz
is quite different
Ok, now understand...thanks for answer
Sent from my HTC One X using xda premium
First day on this mod: almost an extra hour screen on time...lets see if it keeps going like that today too
°Dexter° said:
First day on this mod: almost an extra hour screen on time...lets see if it keeps going like that today too
Click to expand...
Click to collapse
With the same usage?
How about smoothness?
P.s. if you like it could you hit 5 stars?
here my usage during office hours not in overnight sleep.... 6 am to 11.30pm, 17 hours :good:
very impressive, last time i got only 12 hours using viper rom during office hours, and overnight sleep plus office hours 16 hours..
paroys said:
here my usage during office hours not in overnight sleep.... 6 am to 11.30pm, 17 hours :good:
very impressive, last time i got only 12 hours using viper rom during office hours, and overnight sleep plus office hours 16 hours..
Click to expand...
Click to collapse
what about the smoothness?
iba21 said:
what about the smoothness?
Click to expand...
Click to collapse
smooth like stock, not exp any lag...
Sent from my HTC One X
btw 134 views and 9 thanks... that's the faster way to depress a modder :crying:
Hi friends,I'm going to share my experience of amazing battery life on my Redmi 1s..
What I did to get amazing battery life and better multitasking on my Redmi:-
1)I flashed the latest Mokee rom (Release version-272 MB) on my Device.
2)Flashed the Powersaver thermal config Mod.You'll find it at the end of this post.
3)I installed Trickster Mod Kernel setting APK from the play store and I did below modifications to it
a)Set the CPU max and min frequency to 300MHZ and 1094 MHZ.Turned on the CPU frequency lock.
b)Governer set to ONDEMAND and schedular to ROW.
c)Turned on MP-Decision,Set Multicore Power saving mode to 2 and turned on temperature throttle.
d)Set the GPU max frequency to 320 MHZ and governor to ONDEMAND .
(Set it to 450MHZ if you game a lot however it donot cause serious battery changes as per my observations)
4)Install greenify from Play store and hibernate most of the apps That causes cpu wakes (I greenified all downloaded apps )
5) Thats it you are ready to get most out of your redmi's battery. Please comment your experiences here.
Trickster mod link:- https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=en
greenify link:- https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
Mokee rom (Chose latest Release version-271.91 MB)link:- http://download.mokeedev.com/?device=armani
:good: "Hit Thanks if u like this post".:good:
gpreetham said:
Hi friends,I'm going to share my experience of amazing battery life on my Redmi 1s..
What I did to get amazing battery life and better multitasking on my Redmi:-
1)I flashed the latest Mokee rom (Release version-272 MB) on my Device.
2)Flashed the Powersaver thermal config Mod.You'll find it at the end of this post.
3)I installed Trickster Mod Kernel setting APK from the play store and I did below modifications to it
a)Set the CPU max and min frequency to 300MHZ and 1094 MHZ.Turned on the CPU frequency lock.
b)Governer set to ONDEMAND and schedular to ROW.
c)Turned on MP-Decision,Set Multicore Power saving mode to 2 and turned on temperature throttle.
d)Set the GPU max frequency to 320 MHZ and governor to ONDEMAND .
(Set it to 450MHZ if you game a lot however it donot cause serious battery changes as per my observations)
Click to expand...
Click to collapse
If you do a little more changing in governot you didn't need to underclock because doing that you transform a powerfull phone into a Red Rice and that's no good!
pgreed said:
If you do a little more changing in governot you didn't need to underclock because doing that you transform a powerfull phone into a Red Rice and that's no good!
Click to expand...
Click to collapse
Can you be a bit more clearer about it pgreed.
gpreetham said:
Hi friends,I'm going to share my experience of amazing battery life on my Redmi 1s..
What I did to get amazing battery life and better multitasking on my Redmi:-
1)I flashed the latest Mokee rom (Release version-272 MB) on my Device.
2)Flashed the Powersaver thermal config Mod.You'll find it at the end of this post.
3)I installed Trickster Mod Kernel setting APK from the play store and I did below modifications to it
a)Set the CPU max and min frequency to 300MHZ and 1094 MHZ.Turned on the CPU frequency lock.
b)Governer set to ONDEMAND and schedular to ROW.
c)Turned on MP-Decision,Set Multicore Power saving mode to 2 and turned on temperature throttle.
d)Set the GPU max frequency to 320 MHZ and governor to ONDEMAND .
(Set it to 450MHZ if you game a lot however it donot cause serious battery changes as per my observations)
4)Install greenify from Play store and hibernate most of the apps That causes cpu wakes (I greenified all downloaded apps )
5) Thats it you are ready to get most out of your redmi's battery. Please comment your experiences here.
Trickster mod link:- https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=en
greenify link:- https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
Mokee rom (Chose latest Release version-271.91 MB)link:- http://download.mokeedev.com/?device=armani
:good: "Hit Thanks if u like this post".:good:
Click to expand...
Click to collapse
i will try this, but where is the link for Powersaver thermal config Mod? did you mean this mod?
http://forum.xda-developers.com/redmi-1s/general/tools-tips-tutorials-fix-overheating-t2939100
---------- Post added at 07:22 AM ---------- Previous post was at 07:11 AM ----------
gpreetham said:
Can you be a bit more clearer about it pgreed.
Click to expand...
Click to collapse
i think he means that underclocking this phone to 1000mhz would definitely slow it down, rendering the quad-core powerful device incapable to functions at its best performance possible. im running 1344 mhz now and i think its enough compromise between processing power and battery mileage.
JJPahalla said:
i will try this, but where is the link for Powersaver thermal config Mod? did you mean this mod?
http://forum.xda-developers.com/redmi-1s/general/tools-tips-tutorials-fix-overheating-t2939100
---------- Post added at 07:22 AM ---------- Previous post was at 07:11 AM ----------
i think he means that underclocking this phone to 1000mhz would definitely slow it down, rendering the quad-core powerful device incapable to functions at its best performance possible. im running 1344 mhz now and i think its enough compromise between processing power and battery mileage.
Click to expand...
Click to collapse
The config file is at the end of the post as an attached file. I've been using the max frequency at 1095MHZ for about a week and I didn't face any sort of lag in the performance but I dont game.If u game a lot just put GPU to the max frequency thats it.
gpreetham said:
The config file is at the end of the post as an attached file. I've been using the max frequency at 1095MHZ for about a week and I didn't face any sort of lag in the performance but I dont game.If u game a lot just put GPU to the max frequency thats it.
Click to expand...
Click to collapse
crap, so stupid of me, lol is it in any way similar to the one in the link i posted? also, how long does your battery last with moderate, casual use?
JJPahalla said:
crap, so stupid of me, lol is it in any way similar to the one in the link i posted? also, how long does your battery last with moderate, casual use?
Click to expand...
Click to collapse
No prob.I get about one and half days of battery life without a charge and note I don't game a lot and I use max frequency at 1095MHZ.
gpreetham said:
No prob.I get about one and half days of battery life without a charge and note I don't game a lot and I use max frequency at 1095MHZ.
Click to expand...
Click to collapse
wow, that's really great. i came across somewhere that you have to charge the phone will it's off for the first time charge, up until 100% full charge. did you do this? im having problems with my battery, i only get around 15-hours worth per full charge right now.
JJPahalla said:
crap, so stupid of me, lol is it in any way similar to the one in the link i posted? also, how long does your battery last with moderate, casual use?
Click to expand...
Click to collapse
If u are a hardcore gamer Just keep the GPU frequency to 450MHZ .You'll have no issue I played games like Real racing,Contract killer and even Good old NFS most wanted on my device.I faced no lag and note I didn't touched the CPU frequency.There was no issues like overheating or frame drops etc.
JJPahalla said:
wow, that's really great. i came across somewhere that you have to charge the phone will it's off for the first time charge, up until 100% full charge. did you do this? im having problems with my battery, i only get around 15-hours worth per full charge right now.
Click to expand...
Click to collapse
No I just Did what I explained in this post try battery calibration by Neema before calibrating charge your phone to full and calibrate,Reboot.If you loose any juice after reboot just charge it to full again and discharge to 0 and charge again.Note dont interrupt charging or discharging process in the middle.This might help you.
https://play.google.com/store/apps/details?id=com.nema.batterycalibration&hl=en
JJPahalla said:
wow, that's really great. i came across somewhere that you have to charge the phone will it's off for the first time charge, up until 100% full charge. did you do this? im having problems with my battery, i only get around 15-hours worth per full charge right now.
Click to expand...
Click to collapse
I forgot to ask you.Are you running MIUI on your Redmi?????
gpreetham said:
No I just Did what I explained in this post try battery calibration by Neema before calibrating charge your phone to full and calibrate,Reboot.If you loose any juice after reboot just charge it to full again and discharge to 0 and charge again.Note dont interrupt charging or discharging process in the middle.This might help you.
https://play.google.com/store/apps/details?id=com.nema.batterycalibration&hl=en
Click to expand...
Click to collapse
gpreetham said:
I forgot to ask you.Are you running MIUI on your Redmi?????
Click to expand...
Click to collapse
ok, i will try that. i use to run MIUI but i tried the unofficial mokee rom because i thought it might improve the battery life, but to no avail still. i will try the official one though. (the one you posted.)
pgreed said:
If you do a little more changing in governot you didn't need to underclock because doing that you transform a powerfull phone into a Red Rice and that's no good!
Click to expand...
Click to collapse
haha well said bro ... even i was thinking the sae ... whats the point of buying msm8228 1.6ghz processor while you use it at 1ghz haha
---------- Post added at 08:33 PM ---------- Previous post was at 08:28 PM ----------
gpreetham said:
No I just Did what I explained in this post try battery calibration by Neema before calibrating charge your phone to full and calibrate,Reboot.If you loose any juice after reboot just charge it to full again and discharge to 0 and charge again.Note dont interrupt charging or discharging process in the middle.This might help you.
https://play.google.com/store/apps/details?id=com.nema.batterycalibration&hl=en
Click to expand...
Click to collapse
lol these are all battery myths and rumours ... the so called calibration is to be done to old lead acid batteries which is a obsolete tech now and the LI-ion and Li-po batteries we use are much smarter and they dont need to get calibrated and get done all the things you mentioned in your post and allowing it to drain to zero will only reduce the battery cycles left and thus reducing the battery performance so dont spoil your battery by doing all those things just make sure it doesnt die ( drains to zero) every time you charge your phone or else your battery cycles will be reduced
akhilkumarco007 said:
haha well said bro ... even i was thinking the sae ... whats the point of buying msm8228 1.6ghz processor while you use it at 1ghz haha
---------- Post added at 08:33 PM ---------- Previous post was at 08:28 PM ----------
lol these are all battery myths and rumours ... the so called calibration is to be done to old lead acid batteries which is a obsolete tech now and the LI-ion and Li-po batteries we use are much smarter and they dont need to get calibrated and get done all the things you mentioned in your post and allowing it to drain to zero will only reduce the battery cycles left and thus reducing the battery performance so dont spoil your battery by doing all those things just make sure it doesnt die ( drains to zero) every time you charge your phone or else your battery cycles will be reduced
Click to expand...
Click to collapse
Really a helpful note mate but what about batterystats.bin file.I don't know much about it.If you know please make me clear about it.
gpreetham said:
Really a helpful note mate but what about batterystats.bin file.I don't know much about it.If you know please make me clear about it.
Click to expand...
Click to collapse
that is the staus of battery and contain an estimation of battery life accordind to the phone usage.
gpreetham said:
Really a helpful note mate but what about batterystats.bin file.I don't know much about it.If you know please make me clear about it.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=hrcbcm11830
marques k brownlee is a super famous tech reviewer with 2m subscribers on youtube.... dont take his words for granted ... you can also check other links on google even they will convey the same there is no need to calibrate lithium ion battery .... and the file name you mentioned is related to operating system right? however i know only less about os so i cant explain try googling you will find many links saying what i said before
akhilkumarco007 said:
https://www.youtube.com/watch?v=hrcbcm11830
marques k brownlee is a super famous tech reviewer with 2m subscribers on youtube.... dont take his words for granted ... you can also check other links on google even they will convey the same there is no need to calibrate lithium ion battery .... and the file name you mentioned is related to operating system right? however i know only less about os so i cant explain try googling you will find many links saying what i said before
Click to expand...
Click to collapse
Thanks mate really notable post.
500 mb
yes.... finally i see 500 mb free ram on my device, good mod...
Beat this on MIUI.
zTweaked said:
Beat this on MIUI.
Click to expand...
Click to collapse
What the......() ()
Hi Guys,
I'm back with the Xthermal Mod.
But this time it is for Nexus 6P.
Introduction:
Nexus 6P is the best handset I've ever used. No doubts about that.
Nexus 6P has got one of the best Fast Charging.
But why I always get around 800-1100 mA current while charging?
Max to max I get 1500-1700 mA current.
Is this the best fast charging I can get?
Then I opened my thermal engine file and started working on it.
Goal:
Xthermal_Fast_Charge: Here I tried to boost my charging current/speed while keeping rest values to their default.
Xthermal_Performance: Here I tried to boost my charging current/speed + Same basic CPU & GPU tweaks are also applied.
I have successfully been able to achieve average 2600-2800 mA current. (Stock charger supports Max 3000 mA)
Tested with roms based on "N" aka Android 7.x.
Downloads:
Links for Marshmallow:
Xthermal_Fast_Charging_Only.zip
Xthermal_Performance+Fast_Charging.zip
Xthermal_Gaming+Fast_Charging.zip
Back_To_Stock.zip
Links for Nougat:
Xthermal_Fast_Charging_Only.zip
Xthermal_Performance+Fast_Charging.zip
Xthermal_Gaming+Fast_Charging.zip
Back_To_Stock.zip
How to apply:
Just flash the zip using twrp and see the difference using Ampere app...
Credits:
Google
Notepad++
Note to mods: Please kick it to related section if I missed it.
Screen Shots of Ampere app after applying the Xthermal Mod.
I have changed the initial values only.
So don't worry it won't harm your device at all.
The critical high temp. values are still the same.
*** Don't want to say this but please don't blame me for others for your actions***
reserved 2
curiious to see others results. so this is just to increase the fast charge time? what kind of a difference are you seeing versus stock?
r1nstang said:
curiious to see others results. so this is just to increase the fast charge time? what kind of a difference are you seeing versus stock?
Click to expand...
Click to collapse
In normal usage I get around 1500-1700 mA current only.
After applying the mod it goes upto max i.e. 2800-2900 mA.
Actually the stock temperature values to control/limit your fast charging are too low.
So we can't make use of Fast charging in date to day works.
Which one should i flash?
Performance or normal one?
Also just flash and that's it?
Cheers
Sent from my angler using XDA Labs
Prattham said:
Which one should i flash?
Performance or normal one?
Also just flash and that's it?
Cheers
Sent from my angler using XDA Labs
Click to expand...
Click to collapse
Yupp just flash it using twrp...
Xthermal_Fast_Charge.zip have only fast charging tweaks ...
But Xthermal_Performance.zip have fast charging tweaks + other cpu and gpu tweaks to boost the performance too...
I'm personally using Xthermal_Performance.zip...
ravinder0003 said:
Yupp just flash it using twrp...
Xthermal_Fast_Charge.zip have only fast charging tweaks ...
But Xthermal_Performance.zip have fast charging tweaks + other cpu and gpu tweaks to boost the performance too...
I'm personally using Xthermal_Performance.zip...
Click to expand...
Click to collapse
I'll try both and report back
Looks very interesting though
Thank you so much for your work :highfive:
Sent from my angler using XDA Labs
Interesting
Tried it out just now. Works just like it says! Screenshots show it. Great job!
How long does it take to charge? 0 to 100
ravinder0003 said:
Yupp just flash it using twrp...
Xthermal_Fast_Charge.zip have only fast charging tweaks ...
But Xthermal_Performance.zip have fast charging tweaks + other cpu and gpu tweaks to boost the performance too...
I'm personally using Xthermal_Performance.zip...
Click to expand...
Click to collapse
What is the best for device safe, charging while power off or on ?
justin654 said:
Tried it out just now. Works just like it says! Screenshots show it. Great job!
Click to expand...
Click to collapse
I tested it too
My max was 2430 @ravinder0003 is this okay?
Sent from my angler using XDA Labs
Prattham said:
I tested it too
My max was 2430 @ravinder0003 is this okay?
Sent from my angler using XDA Labs
Click to expand...
Click to collapse
Will flashing this tweaks damage phone in a long run, but it looks pretty good. I may flash it later today.
Will performance effect battery life?
Most of the time I use a slow old usb adapter, is it OK to flash this?
Verstuurd vanaf mijn Nexus 6P met Tapatalk
CoopZor said:
Most of the time I use a slow old usb adapter, is it OK to flash this?
Verstuurd vanaf mijn Nexus 6P met Tapatalk
Click to expand...
Click to collapse
It should be fine as the charging adapter handles current amps going through the cable. This allows our Fast Charger to be taken to it's fullest ability
justin654 said:
Tried it out just now. Works just like it says! Screenshots show it. Great job!
Click to expand...
Click to collapse
Thanks
How much faster does this charge compared to stock?
ariefabuzaky said:
What is the best for device safe, charging while power off or on ?
Click to expand...
Click to collapse
Both are good.
Charging while handset is off will make sure less heat and more faster charging... But you will miss your calls and sms...
Charging while power on is also good ...
I have tried to make sure you get max faster charging with your daily moderate usage...
An All Rounder Thermal Mod
FEATURES:
1.Highly Reduced Heating While Playing PUBG (No Lagging) :laugh:
2.Reduced Heating While Charging
2.Reduced heating while using QC 3.0 (Has To Be Supported By Kernel)
3.Reduced Heating While Fast Charging
4.Faster HDR Processing In Google Camera (Testers Needed)
5.Increased Battery Life (Testers Needed)
6.Supports All Nougat & Both Treble & Non Treble Oreo Roms
Note:
For PUBG players I would recommend to remove the backcover if you play in Hot Climate (like India) The Glass Back Is A Poor conductor Of Heat And The Fiberglass Frame too.
The back cover amplifies the thermal insulation so heat remains trapped inside overheating & causing thermal throttling
-Personal Experience
For Non Gamers Too The Mod Will Provide A Cooler Phone
Let It Settle For A Couple Of Hours Before Posting Any Issues (Although Cooling Should Be Instaneous)
Works Well With This Kernel
https://forum.xda-developers.com/le...ernel-uber-kernel-lenovo-zuk-z2-plus-t3784964
Instructions For Flashing:
Flash At The Very Last After Everything Else like Rom, Kernel etc
Hit Thanks If You Liked It
Download
https://drive.google.com/file/d/1pAr9OJfFPgG3XTXcQ3537q-Ulb3mWdAp/view?usp=drivesdk
thanks i'm gonna try it
Thank you, dev! I'll try it, for sure.
Sent from my ZUK Z2 Plus using XDA Labs
1st Update
Changes:
Removed Some Useless Values which caused heating & for ease of execution
Download Link Updated In OP
Access denied to the file
@AstroBiswas
Does this mod work on non treble ROMs?
gamaalves said:
Thank you, dev! I'll try it, for sure.
Click to expand...
Click to collapse
Better than suncooling??
aswin620002 said:
Access denied to the file
Click to expand...
Click to collapse
Testing Phase Over, Links Opened For All Now
Hoping To Be Cooler Than Others
Will this work on Android 7.1.1??
jaswinprakash said:
Will this work on Android 7.1.1??
Click to expand...
Click to collapse
No bro... read the title .. it clearly says for oreo
jaswinprakash said:
Will this work on Android 7.1.1??
Click to expand...
Click to collapse
adil786ali63 said:
No bro... read the title .. it clearly says for oreo
Click to expand...
Click to collapse
Script Updated Supports Both Oreo & Nougat Now
AstroBiswas said:
Script Updated Supports Both Oreo & Nougat Now
Click to expand...
Click to collapse
QC 3.0 LOL whats the current limit u have set there??!
Current should not go above 2400mA
Above that it can cause harm to hardware !!
Does it changes any clock frequency of cpu or gpu
IIRC controlling thermal throttle via this config file only works when using Core Control. If Im using Intellithermal and control the thermal threshold in KA, would this mod do anything?
Also, can you do thermal throttling base on battery temperature?
---------- Post added at 10:47 AM ---------- Previous post was at 10:47 AM ----------
IIRC controlling thermal throttle via this config file only works when using Core Control. If Im using Intellithermal and control the thermal threshold in KA, would this mod do anything?
Also, can you do thermal throttling base on battery temperature?
kashyapp said:
QC 3.0 LOL whats the current limit u have set there??!
Current should not go above 2400mA
Above that it can cause harm to hardware !!
Click to expand...
Click to collapse
It Controls The Heating While Charging
AstroBiswas said:
It Controls The Heating While Charging
Click to expand...
Click to collapse
Are u sure it will not mess with hardware
What temp u got on pubg ??!
This mod seams realy great, after flashing it on bootleggers the UI is faster, ram usage is lower, I dint test battery and pubg performance yet.
Pubg users
Tried this mod
In medium and fps to medium also
30+ min and temp -
44.7 for battery
57 for cpu
59 for gpu
One thing noted after flashing this mod the frequency 2.15mhz and 1.5mhz for both bigger and littel clusters are not utilising
Instead it utilising the 1.5 for big and 1.2forsmall cluster !!
AstroBiswas said:
An All Rounder Thermal Mod
FEATURES:
1.Highly Reduced Heating While Playing PUBG (No Lagging) :laugh:
2.Reduced Heating While Charging
2.Reduced heating while using QC 3.0 (Has To Be Supported By Kernel)
3.Reduced Heating While Fast Charging
4.Faster HDR Processing In Google Camera (Testers Needed)
5.Increased Battery Life (Testers Needed)
6.Supports All Nougat & Both Treble & Non Treble Oreo Roms
Note:
For PUBG players I would recommend to remove the backcover if you play in Hot Climate (like India) The Glass Back Is A Poor conductor Of Heat And The Fiberglass Frame too.
The back cover amplifies the thermal insulation so heat remains trapped inside overheating & causing thermal throttling
-Personal Experience
For Non Gamers Too The Mod Will Provide A Cooler Phone
Let It Settle For A Couple Of Hours Before Posting Any Issues (Although Cooling Should Be Instaneous)
Works Well With This Kernel
https://forum.xda-developers.com/le...ernel-uber-kernel-lenovo-zuk-z2-plus-t3784964
Instructions For Flashing:
Flash At The Very Last After Everything Else like Rom, Kernel etc
Hit Thanks If You Liked It
Download
https://drive.google.com/file/d/1pAr9OJfFPgG3XTXcQ3537q-Ulb3mWdAp/view?usp=drivesdk
Click to expand...
Click to collapse
How can i get stock thermal config after flashing this zip??!!
kashyapp said:
How can i get stock thermal config after flashing this zip??!!
Click to expand...
Click to collapse
Flash these files from here:
https://androidfilehost.com/?fid=673956719939827068
Sent from my ZUK Z2131 using Tapatalk
fuH Kernel is a custom kernel for Nokia 8 (NB1) running Android 9 Pie, based on official HMD sources.
I am not responsible for any software damage, lost files, dead Nokias, rusted Civics, thermonuclear war and rotten bananas. YOU ARE INSTALLING THIS KERNEL ON YOUR OWN RESPONSIBILITY!
Click to expand...
Click to collapse
##############################
Features 26/6/2022
##############################
- NTFS R/W support
- F2FS R/W support
- schedutil governor
- CPU Overclock and Underclock (from 175MHz up to 2,6GHz for big cluser, and up to 2,1GHz for little cluster!)
- GPU Overclock (up to 850MHz)
-KCal support
- Magisk 24.1
- OrangeFox Recovery
##############################
Requirements
##############################
- A working driver for your device.
- Unlocked bootloader
- Latest Android update (from october 2020)
##############################
Installation Instructions
##############################
- adb devices
- adb reboot bootloader
- fastboot devices
- fastboot flash boot fuHKernel_by_zbieracz2000_300622.img
- fastboot reboot
Click to expand...
Click to collapse
- ENJOY!
Download:
http://aligstor.pl/files/fuHKernel_by_zbieracz2000_300622.img
Source:
https://github.com/zbieracz2000/fuHKernel-NB1
Base source:
https://www.nokia.com/phones/en_int/opensource/
Thx dude! I'll try it as soon as I can.
small feature request though: Can you implement voltage control? might be useful to prevent thermal throttling.
Ayhem-GH said:
Thx dude! I'll try it as soon as I can.
small feature request though: Can you implement voltage control? might be useful to prevent thermal throttling.
Click to expand...
Click to collapse
That's actually one of the features I'm currently working on
i was waiting for this thank you
I've just added support for KCal, and extended GPU OC up to 850MHz
Hello. This will not be ported to A12 builds, right?
TechNoobForSale said:
Hello. This will not be ported to A12 builds, right?
Click to expand...
Click to collapse
It will be in the future
zbieracz2000 said:
It will be in future
Click to expand...
Click to collapse
Are you God?
zbieracz2000 said:
It will be in the future
Click to expand...
Click to collapse
Brooooo do it ASAAP
MADY PLAYS said:
Brooooo do it ASAAP
Click to expand...
Click to collapse
Admittedly many people are using A12 Treble ports, me included. Stock is a very unfair ROM, because for example it caps big at 2.36GHz instead of the advertised 2.45.
Furthermore, there isn't really a good Kernel on A12 NB1 ROMs. They all underperform compared to stock. So zbier has the power to change a world in his hands.
The issue with this Kernel is that when I try to use 2592MHz big, as soon as I open an app, max goes back to 2361. Little cores do listen but when opening an app, they always boost to 2112 regardless of the limit I set. Maybe this is MPDecision problem?
Also GPU overclock brings no improvement at all over stock 710MHz
TechNoobForSale said:
The issue with this Kernel is that when I try to use 2592MHz big, as soon as I open an app, max goes back to 2361. Little cores do listen but when opening an app, they always boost to 2112 regardless of the limit I set. Maybe this is MPDecision problem?
Also GPU overclock brings no improvement at all over stock 710MHz
Click to expand...
Click to collapse
What app do you use? It works perfectly on EX Kernel Manager
zbieracz2000 said:
What app do you use? It works perfectly on EX Kernel Manager
Click to expand...
Click to collapse
Smart pack Kernel manager. I also tried Franco Kernel manager and the phone still doesn’t listen. I’ll try EX.
Still nothing. Big cpu goes back to 2361MHz whenever I open any other app after the kernel manager. GPU at 850MHz no performance improvement
On Schedutil governor the big CPU overclock "works"
What I mean with works is that the frequency does go above 2361MHz stock, but it doesn't ACTUALLY reach 2592. It simply reaches the max stock limit for MSM8998, which is 2457MHz and has been capped to 2361MHz on Nokia 8. I noticed from the Geekbench scores.
GPU doesn't OC at all. 850MHz = 710MHz and 770MHz = 670MHz. The system is ignoring the values.
@TechNoobForSale
Can you confirm whether fast charging works for you on this kernel? I have tried both fuHKernel and Umbrella kernels but neither of them seem to charge more than 1.1A with a Quick Charge 3.0 plug. When I previously used Treble custom ROMs I could charge at the full 3A maximum.
P650SE said:
@TechNoobForSale
Can you confirm whether fast charging works for you on this kernel? I have tried both fuHKernel and Umbrella kernels but neither of them seem to charge more than 1.1A with a Quick Charge 3.0 plug. When I previously used Treble custom ROMs I could charge at the full 3A maximum.
Click to expand...
Click to collapse
Can't confirm or deny. Mine charges at 1.4A off of a powerbank. This Kernel is essentially stock Kernel but with "Overclock" (not really, it's just stock Kernel with an ATTEMPT to overclock).
Try different plugs.
TechNoobForSale said:
Can't confirm or deny. Mine charges at 1.4A off of a powerbank. This Kernel is essentially stock Kernel but with "Overclock" (not really, it's just stock Kernel with an ATTEMPT to overclock).
Try different plugs.
Click to expand...
Click to collapse
Alright, thanks. I have actually retested just now using a dedicated USB voltage tester with a different plug and cable. Here are my findings: With a standard 2.4A non-Quick Charge charger it charges at 1.4A which is the same as what you're getting from the powerbank. If I use my Qualcomm charger it increases slightly to 1.5A. This is still half of the 3A speed I was getting on the custom ROMs.
I will try reflashing the stock kernel and see if there's any difference. Otherwise, I have no idea why I am not able to achieve the full charging speed anymore.
In fact, the only reason I use the custom kernel is for KCAL colour adjustment. Because my phone has a third-party replacement LCD and I have to use kernel adjustment to increase the saturation. I'm not fussed about the overclocking or performance enhancements.
P650SE said:
Alright, thanks. I have actually retested just now using a dedicated USB voltage tester with a different plug and cable. Here are my findings: With a standard 2.4A non-Quick Charge charger it charges at 1.4A which is the same as what you're getting from the powerbank. If I use my Qualcomm charger it increases slightly to 1.5A. This is still half of the 3A speed I was getting on the custom ROMs.
I will try reflashing the stock kernel and see if there's any difference. Otherwise, I have no idea why I am not able to achieve the full charging speed anymore.
In fact, the only reason I use the custom kernel is for KCAL colour adjustment. Because my phone has a third-party replacement LCD and I have to use kernel adjustment to increase the saturation. I'm not fussed about the overclocking or performance enhancements.
Click to expand...
Click to collapse
The reason I’m using custom kernel is because being locked at 2361MHz instead of getting what 835 was rated for was making me angry. Also I wanted frequency control.
I think that maybe Nokia 8 doesn’t support QuickCharge 3.0 which is why it doesn’t manage 3A. Probably a thing introduced by A12/A11 ROMs, I used to use them but I reverted back to stock partition table because they perform worse.
TechNoobForSale said:
The reason I’m using custom kernel is because being locked at 2361MHz instead of getting what 835 was rated for was making me angry. Also I wanted frequency control.
I think that maybe Nokia 8 doesn’t support QuickCharge 3.0 which is why it doesn’t manage 3A. Probably a thing introduced by A12/A11 ROMs, I used to use them but I reverted back to stock partition table because they perform worse.
Click to expand...
Click to collapse
Yeah I think you're perhaps right. It's probable the Nokia 8 doesn't even officially support Quick Charge despite having the capabilities to do so. It's been so long since I used the stock ROM that I don't remember. It doesn't state anything about QC on the phone's box.
I tried switching off the phone completely and retesting the charging speed in offline mode (without booting Android) which gives the same speed of around 1.4A. So I guess that confirms it is nothing to do with the kernel.
I agree it's frustrating that the clock speed is limited in the stock kernel. I don't understand why they do that. The reason I switched back to stock ROM is mainly due to the WiFi signal. In the custom ROMs the signal is terrible and constantly disconnects from the router. I don't have this issue in stock ROM. I also hate the Material You redesign in A12 and refuse to upgrade to that version.