today i installed cyanogenmod CM13 and gapps on my asus zenfone 2, the install went fine, but when i booted my phone, i selected the language, then when it went to look for updates, a system message appeared "google play services has stopped", which has caused the phone to hang at the update page, and to top it off i forgot to install TWRP, so i think im going to have an issue installing a fresh install.
does anybody have any ideas as to what i can do please?
+1 same problem
https://github.com/opengapps/opengapps/issues/200
This is a CM bug (not relating to our device), showing up on a lot of devices since 3/26 builds. Chances are it will be fixed soon.
kobiahi-maru said:
today i installed cyanogenmod CM13 and gapps on my asus zenfone 2, the install went fine, but when i booted my phone, i selected the language, then when it went to look for updates, a system message appeared "google play services has stopped", which has caused the phone to hang at the update page, and to top it off i forgot to install TWRP, so i think im going to have an issue installing a fresh install.
does anybody have any ideas as to what i can do please?
Click to expand...
Click to collapse
Use GApps Pico/Nano package. I am facing this issue if I use Stock GApps Package. But it goes fine with Pico/Nano Pacage...
Over my fully stock mobile (With Stock OOS 4.1.7) had installed following in sequence: Factory Reset with TWRP, Flash Stock Modem and Firmware Open Beta 22, then Patch for dm-verity, and finally Resurrection ROM 5.8.4 with GAPPS and no wipe cache/data. Now mobile is working fine and rooted, but two problems still persist - any suggestions ?
Key Issue: Clean master autostarts does not show up, i think root is not detected with Magicsk ? Can I safely flash SuperSU with Magicsk to get it working or some other remedy to be done ?
Secondry Issue: Not sure its related or not, but SafteyNet shows ctsProfile=false, basicIntegrity=false. I've no supersu installed so no question of leftover files, also there is no USB debugging option so that I can enable this stuff (may be required for clean master ?). Alongside other apps like Android Pay, not working due to SafetyNet issues.
Hi everyone
I have got a Samsung Tab Pro 10.1 (SM-T520) and it unfortunately stopped updating due to it been so old and was left behind on android KitKat 4.4.
So I decided to root it and download the lineage update to get android 7.1.2 custom ROM on it and give it a bit of life instead of never been used because it's slow and blotchy.
When I download the ROM everything worked really well, moment installed Gapps it when pear shaped. I was met with "android is starting" message stopping me from do anything but go on settings through notifications bar and it made my keyboard disappear.
So I just flashed the lineage ROM back to standard without Gapps. I have tried most of the Gapps packages that they make and I get the same thing every time with the missing keyboard.
My real question is can build a set of google apps through apk. I have tried installing google play, google play services and google play frame something (can't remember the last one) all of them either don't work or crash and just not stop being up a message saying each one of them isn't working.....what apps do need to install or flash to build up my own set of google apps without using Gapps
(Just some notes at the end to help, I rooted using root genius, my custom boot is TWRP, I installed TWRP via odin and lineage seems to be the only ROM that does a android 7 for my device, the apps I want working are google play store, google app, google maps, google assistant (if possible), gmail and maybe calender. The rest of them are on my non rooted s7e so don't need them on the tablet.)
Hope someone can help
hello
there " http://opengapps.org/ " use aroma version
or there " https://www.apkmirror.com/ "
it's what u need
regards
Thanks.
In the end I just picked and tried flashing different Gapps packages, when a package I tried wouldn't work I just flashed installed the original lineage 14.1 ROM, to wipe the Gapps package....after trying about 4 different packages from Gapps I think the micro package worked.
Just can't get android assistant to work now, do anyone have any ideas???
hello
before installing opengapps u should wipe data, cache, walvick
regards
Hello friends of XDA, I have a question about my g5
As you can see, I had installed the ViperOS ROM together with their respective Gapps in the afternoon I was wonderfully mobile until at one point while being on YT it freezes not moving at all on the screen, I decided to restart it believing it was operating system error or saturation in the ram then qur of restarting continued to fail I decided to reinstall the rom without gapps and see how it worked and to my surprise the messaging applications, phone and contacts stopped me down the rom LineageOS to try luck and the same problem was freezes every time I install the Gapps and connect it to Wi-Fi
I clarify that without Gapps it connects and works correctly without freezing
I hope you help me
You haven't said what gapps you are using
With oero based roms I would use mind the gapps
http://downloads.codefi.re/jdcteam/javelinanddart/gapps
If it's a 64 bit rom choose arm64
If it's a 32bit rom choose arm
I was using the OpenGapps, It's the first time this happens to me with those gapps probrare with these many thanks for responding then comment how I was
It works correctly thank you! they were maybe the OpenGapps Gapps a lot of thanks sir! I will close the thread with a thing so that they do not make the same mistake that I made, Do not download from Open download the link that is placed above it brings you the minimum for the PlayStore to work as it is
Requirements:
- Stock Clean Firmware: https://mirrors.lolinet.com/firmware/moto/kane/official/
- TWRP: https://forum.xda-developers.com/one-vision/how-to/twrp-3-3-1-0-root-updated-kane-troika-t4102839
- GSI ROM (arm64, A/B versions): https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
- Permissiver_V5 Flashable Zip: https://androidfilehost.com/?fid=6006931924117940902
- Google Play Services APK - Whenever you boot into a GSI the first thing you should do is install the Google Play Services APK. Installing it will clear the "System Updating..." notification and you will be able to login to your Google account.
Google Play Services for Android 9 GSI: https://www.apkmirror.com/apk/googl...-24-13-100400-316577029-android-apk-download/
Google Play Services for Android 10 GSI: https://www.apkmirror.com/apk/googl...-24-13-120400-316577029-android-apk-download/
Instructions:
- Flash Stock firmware
- Wipe system and data in TWRP
- Reboot to bootloader
- Run the following command in the command line:
Code:
fastboot flash system [yourGSI.img]
- While still in fastboot mode run:
Code:
fastboot -w
- Reboot to TWRP and flash Permissiver_V5 zip file
- Reboot to the system
Notes:
Look at the size of the downloaded GSI.img file (Not the zip file), If it's larger than 3GB you won't be able to flash it because the system partition is limited to 3GB)
Permissiver_V5 is required for some GSI to successfully boot, some of GSIs might work without it but if you don't flash it and the GSI doesn't boot that might be the main problem.
GSI ROMs might have some bugs, the most known bug at least on One Vision and maybe Action is the Bluetooth Freeze Bug that might happen when you try to play music over Bluetooth. Be prepared for anything.
Not every GSI will successfully boot. Some of them might not boot but don't worry as there are a lot of GSIs for you to try on.
Same procedure works for both One Action and One Vision
FAQ:
Do I need to flash GAPPS after I install an GSI?
No. Flashing GAPPS is an optional step, most of the GSIs might already come with GAPPS installed and all you have to do to enjoy your ROM is to install the Google Play Services apk mentioned in my post.
You must install GAPPS if the GSI you're using doesn't have the Google Play Store app and you want to install any apps from the Play Store, but even then there are alternatives to install Play Store apps even without installing any GAPPS package
After installing a GSI my phone it's stuck in a bootloop, what do I do?
The main reason for your android not booting up is that some vendors enforce SELinux which stops GSIs from booting and the fix for that is by flashing the Permissiver_V5 zip file to be able to boot into GSI.
But if you can't boot even after you flashed Permissiver_V5, you either downloaded the wrong GSI or the GSI isn't compatible with your device so you have to find another GSI to flash. Remember that not every GSI can successfully boot.
The X GSI has the Y problem! How do I fix it?
Even after your GSI finished booting there's no guarantee that everything will work as it should. The best thing you can do is to find support on google, or if the creator of the GSI has provided any contact links (Email, Telegram, etc) you can contact him and ask him if there's a fix for your problem or not.
This is something new for me, I was used to install rom and gapps, is this something similar?
simije97 said:
This is something new for me, I was used to install rom and gapps, is this something similar?
Click to expand...
Click to collapse
Flashing GAPPS is totally optional, GSIs will work even without flashing them. Most of them already have GAPPS installed, other might not work with GAPPS.
Is totally up to you if you want to flash GAPPS on a GSI, but as I said most of them don't need it, the most important thing to install after flashing a GSI is to install the Google Play Service to login into your Google account and fix any issues related to Android Setup
[Edit] I've added a small FAQ section to my post above
simije97 said:
This is something new for me, I was used to install rom and gapps, is this something similar?
Click to expand...
Click to collapse
There are 2 main reasons why you should install GAPPS:
1: The GSI you're flashing doesn't have any google apps and in that case to be able to login into a google account and install apps using Play Store you have to install a GAPPS package to have access to google play store
2: The GSI has access to PlayStore but you just want to have other apps like YouTube, Gmail installed in your system. In this case I myself, I prefer to install the Google apps that I need from play store rather than installing a GAPPS package that bloats my phone with apps I don't use.
Anyway, flashing GAPPS is totally optional and it's up to you if you want it or not.
The most important thing when installing a GSI is to look if it has any google apps, if yes then it's important to install Google Play Services apk listed in my post.
To give you a small example Google Experience comes with google apps included so you never have to install GAPPS. I'm using Google Experience and everything worked out of the box, it didn't require the Google Play Services but I guess I just got lucky.
This can't be said for when I've installed an Android 11 Pixel-based GSI, where I had to install the Google Play Services to be able to use my Google Account and finish the android setup.
After few weeks I decided to try this and it works just fine, thank you. Unfortunately ROMs are not created for that big hole on the screen. It hides time, notifications etc., otherwise it works pretty well.. Any sugestions how to repair it? Thank you again
Go to developer settings. You find notch settings.
rhaavin said:
Go to developer settings. You find notch settings.
Click to expand...
Click to collapse
I installed Descendant X, there are some options for notch, but it doesn't work for One Vision.
Put the apk attached in /system/overlay and it will correct the values for the punch hole. Don't forget to reboot after. Also I've made this a long time a go but I didn't had time to test it as I'm on Android 8 due to working on something.
Report back if it works or not thanks.
SnoopDoggyStyleDogg said:
Put the apk attached in /system/overlay and it will correct the values for the punch hole. Don't forget to reboot after. Also I've made this a long time a go but I didn't had time to test it as I'm on Android 8 due to working on something.
Report back if it works or not thanks.
Click to expand...
Click to collapse
Unfortunately, I had to install stock firmware because of my work and Google pay. I was trying to hide root but I was unsuccessful. Anyway, thank you very much for sharing this
I installed GSI ROM, I have been trying to root it for 3 hours. Can someone here tell me what to do?
[Q][RECOVERY][3.4.0-0][kane] Official TWRP & Root for Motorola One Vision
Root & TWRP 3.4.0 for Android 10. Page on the official TWRP website https://twrp.me/motorola/motorolaonevision.html Installation Instruction 1. Download twrp-3.4.0-0-kane.img and twrp-installer-3.4.0-0-kane.zip TWRP, patched vbmeta.img and...
forum.xda-developers.com
WellThisSucks1 said:
I installed GSI ROM, I have been trying to root it for 3 hours. Can someone here tell me what to do?
Click to expand...
Click to collapse
You can take the "Magisk-v20.x-phh.zip" for root
Magisk-v20.3-phh.zip | by shumway66 for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Should work
simije97 said:
Unfortunately, I had to install stock firmware because of my work and Google pay. I was trying to hide root but I was unsuccessful. Anyway, thank you very much for sharing this
Click to expand...
Click to collapse
This works
alphalog said:
This works
Click to expand...
Click to collapse
How do I make it work?
Como lo hago funcionar xd
ChriisTBv said:
How do I make it work?
Como lo hago funcionar xd
Click to expand...
Click to collapse
Copy the apk to system/vendor/overlay
and reboot
Thank you very much for continuing to support and improve this smartphone