I have a moto g5s xt1792 after I unbrick trying to install lineage, almost everything is working the problem is the lock screen, after a while the screen goes black, it lights up (with the black screen) I can unlock the screen but if it is just the pin or the pattern the screen remains black after unlocking the screen, if it is with the fingerprint it goes back to normal and I can see things.
there is another problem related to the sensor, the screen does not light up when i pick up the cell phone i have to press the power button for the screen to light up
the stockrom I installed is this one
MONTANA_OPPS28.65_37_7_11_cid50_subsidy_DEFAULT_regulatory_NO_ERASE_MODEMST_CFC.xml
and then I reinstalled this one because I noticed the screen lock problem but it continues
MONTANA OPP28 65-37-7 cid50 subsidy-DEFAULT regulatory-DEFAULT CFC
sorry the bad english and thanks for the attention
--edit--
the black screen appears after a long time or randomly after i lock the screen
I noticed something too, the black screen disappears after I keep pressing the power button to light up the screen a few times and then the screen shows the screen lock
Related
when i press the power button to sleep and i try to woke up the jtc the screen stays black but the phone work normaly but the screen black why ?
Because it's broken. There are quite a few threads about this.
Can anyone unlock the phone using home button ?
it only works with the power button for me. The home button works when the screen is on but not when , the screen is turned off the phone flashes for brief second then screen goes off, i noticed this before i downgraded and after it has always been like this, its like I am double tapping it when I am not . I get the same response if i double tap the power button
Just to be clear. Are you asking if the screen turns on and stays on after pressing the Home button while the screen is turned off?
I'm on unlocked 3.6.8 and if my screen is off, I can press the home button and the screen turns on (still have to slide to unlock or enter PIN). However, the screen does stay on for a period of time and I can sit and look at the lock screen, view the dynamic perspective on it, etc until the timer eventually shuts the screen off again.
If the sensor located below the front camera is covered up with a screen protector or anything else then you can have problems turning the phone on with the home button or the camera button.
All screen protectors with a hole for the sensor should work on the phone. Screen protectors without a hole for the sensor may or may not work. My screen protector doesn't have a hole for the sensor but I don't have a problem turning the phone on with the home button. But if I cover the sensor with my thumb I can not turn my phone on with the home button.
when i try to unlock my phone the screen goes black and again if i press the power button the screen wakes up ,i can see my lockscreen but after i unlock the screen becomes black
ANYONE THERE PLS HELP ME OUT!!!!!!!!
My wife's phone looked completely dead this morning, so I pulled the battery and then rebooted. The led did its usual start up pulse but the screen remained black.
Double tapping to wake, then tapping the centre of the screen where login field is, then tapping where the keyboard is, results in haptic feedback, but the screen never turns on from black.
Tried holding down + power to boot into recovery, but no idea if it works. No response from the screen.
Anything I can try? :crying:
judith prietht said:
My wife's phone looked completely dead this morning, so I pulled the battery and then rebooted. The led did its usual start up pulse but the screen remained black.
Double tapping to wake, then tapping the centre of the screen where login field is, then tapping where the keyboard is, results in haptic feedback, but the screen never turns on from black.
Tried holding down + power to boot into recovery, but no idea if it works. No response from the screen.
Anything I can try? :crying:
Click to expand...
Click to collapse
Its the faulty motherboard chipset issue, same as me.
Take the phone apart and place a piece of plastic or something on top of the display ribbon connector underneath the battery. That solved this problem for me.
Seems to occur because the board in the g3 has too much space to flex etc in general usage.
Hello
i installed lineage 16 and i saw there is black screen issue. so i downgrade version to 15.1 and i still seeing black screen issue.
lemme explain black screen
all turns full black no background lightning, when i open screen turns black, only way to get rid of is lock screen and open screen. its really annoying.
also i noticed something. when black screen ups back button home button and menu button lights become on.
my device t810 lineage 15.1