Related
I have a Joying car radio RK3188 1024x600 and it works fine till I got laast week on my Oneplus One smartphone Marshmallow update (Cyanogen OS 13).
Now I can't connect my device anymore via bluetooth.
I can see that the two devices are paired but the letters on the radio screen are still white an phonebook is not available. On my smartphone I see under bluetooth settings that there is a connection but without phone funktion.
I contact manufacturer and he offered to go into recovery and wipe all data/ factory and cache reset and then install firmware. I did this exactly two times with firmware JY_rk3188_h(20160222) RK3188 1024*600 from february and the latest firmware JY_rk3188_h(20160328) RK3188 1024*600. But I still can't connect phone with bluetooth, has someone an idea and maybe the same problems?
MueKo said:
it works fine till I got laast week on my Oneplus One smartphone Marshmallow update (Cyanogen OS 13).
Now I can't connect my device anymore via bluetooth.
Click to expand...
Click to collapse
Well known problem with CM13 and HU bluetooth...
Apparently no other solution than going back to CM12, at least for Oneplus smartphones.
themissionimpossible said:
Well known problem with CM13 and HU bluetooth...
Apparently no other solution than going back to CM12, at least for Oneplus smartphones.
Click to expand...
Click to collapse
Thanks for your answer. Is it known where the problem comes from, CM13 or HU?
MueKo said:
Is it known where the problem comes from, CM13 or HU?
Click to expand...
Click to collapse
My speculation is that there might be some incompatibility between the 2 Bluetooth stacks profile implementation... as the problem is only with CM13, this incompatibility should be mostly ascribed to CM13.
Same issue here
Does anyone know if this will be resolved in an update to CM13?
I found a thread saying this:
open the /system/etc/init.qcom.bt.sh and edit the following line:
Setprop ro.bluetooth.hfp.ver 1.7
... To:
Setprop ro.bluetooth.hfp.ver 1.5
But my phone is not rooted
This is interesting, maybe someone has a rooted OnePlus One and can test this?
Tested and Working well
Tested and making no difference. Still no phone BT connection to my car hands-free head unit.
PAPPAFRITAS said:
Tested and Working well
Click to expand...
Click to collapse
Can you specify which OS do you have used.
Same issue here, now on CM13-20160415-NIGHTLY-bacon... I hope in the near future it will come fix... (MCU KGL5 2.55)...
ranmic said:
Does anyone know if this will be resolved in an update to CM13?
I found a thread saying this:
open the /system/etc/init.qcom.bt.sh and edit the following line:
Setprop ro.bluetooth.hfp.ver 1.7
... To:
Setprop ro.bluetooth.hfp.ver 1.5
But my phone is not rooted
Click to expand...
Click to collapse
Worked like a charm for me!
OnePlus One on Android 6.0.1 - first time Bluetooth is actually working with that unit.
Fixed in nightly 2904 and working perfectly since.
Sent from my Bacon via XDA free
Today I checked this solution. I rooted my OnePlus One with CM13.0 and edit init.qcom.bt.sh file like this:
ranmic said:
Does anyone know if this will be resolved in an update to CM13?
I found a thread saying this:
open the /system/etc/init.qcom.bt.sh and edit the following line:
Setprop ro.bluetooth.hfp.ver 1.7
... To:
Setprop ro.bluetooth.hfp.ver 1.5
Click to expand...
Click to collapse
And I can confirm that it works.
I was just wondering if someone could pull the LAst version APK of Netflix for the fire and post it here. The last official version.
Thanks in advance!
The last version right now for the Fire TV is com.netflix.ninja 2.4.1 (Android TV version), also I tried to manually upgrade Netflix to the last version 3.1.1 from ADB and it works but there are a lot of flickering when you navigate the app.
Here is the APK
innovaciones said:
The last version right now for the Fire TV is com.netflix.ninja 2.4.1 (Android TV version), also I tried to manually upgrade Netflix to the last version 3.1.1 from ADB and it works but there are a lot of flickering when you navigate the app.
Here is the APK
Click to expand...
Click to collapse
Sorry for being off-topic, but I sideloaded this app on my Fire TV stick, and I'm able to login. But every episode loads till 99%, and then it displays an error saying that the title can't be played right now. Would you know any reason why that might be a problem?
Is it possible to install and run properly the non-android tv apk? I would like to download contents but it is not possible with the stock apk
Enviat des del meu ONEPLUS A6003 usant Tapatalk
I have started to have problems with my Nexux 7 and the newest 6.x OTA update.
I cannot either stream or play the downloaded file. Streaming I get an error 0013.
I tried renaming/deleting the liboemcrypto.so file as suggested in anther thread here but I am running into some issues. First the file is no longer located in the /vendor/lib but now it it in the /system/lib folder
And when I try to rename and/or deleting (using ESS Explorer Pro), the file is back to its original name or location after a power off.
Any suggestions to rename the file?
Thanks
CM 14.1
Same problem here, but only with downloaded file.
The streaming problem was fixed by reverting back to an older Netflix APK, version 4.8.5 but that of course does not have the Download option. With the newer version of the APK I get a 102.2.6 error code. Looking at the Play Store comments it looks like quite a few people are having the same issue with streaming video.
Irefra, what version of the APK are you running?
Devices are rooted?
I see this problem on all the Nougat builds I have tried.
Either Netflix or Google Movies works and if Netflix works it won't download. Oddly it will download if it is broken, it just won't play the files.
capun1950 said:
The streaming problem was fixed by reverting back to an older Netflix APK, version 4.8.5 but that of course does not have the Download option. With the newer version of the APK I get a 102.2.6 error code. Looking at the Play Store comments it looks like quite a few people are having the same issue with streaming video.
Irefra, what version of the APK are you running?
Click to expand...
Click to collapse
The last version. Netflix 4.13.0 build 14540
Same problem
Same problem for me, with CM 14.1 (tried both unrooted and rooted device).
It seems that the video can lay until the quality starts to become better. I have the streaming quality set to AUTO; I also tried setting it to HIGH, and to LOW but the problem remains.
Using version 4.8.5 it seems that all is working fine.
Use 14.12.2
lrefra said:
The last version. Netflix 4.13.0 build 14540
Click to expand...
Click to collapse
I called Netflix on January 25, 2017, and spoke with them about 4.13 not being able to mirrorcast.
They said it has been reported by several already.
I went back to 4.12.2 and downloads and mirrorcast work for me. Just cannot use external SDcard feature that was introduced in 4.13.
A bit different , but I use Plex, and 6.0.1 official OS and 7.1.1 lineage os both are working smoothly. It streams just nice.
Same her, stream works fine. But when i play downloaded files > Error 102.2.6. Any new solution or workaround?
St0neC0ld said:
Same her, stream works fine. But when i play downloaded files > Error 102.2.6. Any new solution or workaround?
Click to expand...
Click to collapse
Which rom & root app?
Has this problem been resolved? I am still needing to use Netflix 4.8.5 on Nougat Purenexus. Would like to go to current version of NFlx. Am using Magisk 14.2.
I tried the newest version 5.11.3 Build 25442, Streaming a movie you get error 5.2 and it stops. SUCKS!!!!
capun1950 said:
I tried the newest version 5.11.3 Build 25442, Streaming a movie you get error 5.2 and it stops. SUCKS!!!!
Click to expand...
Click to collapse
Have you find a workaround yet ?
capun1950 said:
I tried the newest version 5.11.3 Build 25442, Streaming a movie you get error 5.2 and it stops. SUCKS!!!!
Click to expand...
Click to collapse
idem, you solved?
nope
If you want to run Netflix, you need to run an older version of NetFlix. The ROM developer for Pure Nexus created a signed version (I think avoids you receiving app updates). Here's a link to the download: https://androidfilehost.com/?fid=529152257862715472 Thank the developer (his ROM and any other info is located here: https://forum.xda-developers.com/nexus-7-2013/development/rom-pure-nexus-substratum-t3576447 ).
I usually change the DPI via build.prop and that has worked fine for as long as I can remember on every Android phone/version I've used. It was working fine on the OP3 up until I've just installed OOS 4.1.0 (7.1.1).
Whatever is set in build.prop just doesn't work.
Any ideas? Anyone noticed the same? Any fixes?
ant_thomas said:
I usually change the DPI via build.prop and that has worked fine for as long as I can remember on every Android phone/version I've used. It was working fine on the OP3 up until I've just installed OOS 4.1.0 (7.1.1).
Whatever is set in build.prop just doesn't work.
Any ideas? Anyone noticed the same? Any fixes?
Click to expand...
Click to collapse
Nougat does not need this anymore.
You can simply use the builtin scaling settings inside Settings - Display
or you can even further tweak this to any DPI by changing the "smallest width" value inside the developer options:
http://phandroid.com/2016/05/24/how-to-change-dpi-settings-on-android-n-nexus-no-root/
ant_thomas said:
I usually change the DPI via build.prop and that has worked fine for as long as I can remember on every Android phone/version I've used. It was working fine on the OP3 up until I've just installed OOS 4.1.0 (7.1.1).
Whatever is set in build.prop just doesn't work.
Any ideas? Anyone noticed the same? Any fixes?
Click to expand...
Click to collapse
I use 350DPI and i make chance to Root Essential app.
https://play.google.com/store/apps/details?id=com.superthomaslab.rootessentials&hl=en
Latest rom : lineage-19.1-20220928-UNOFFICIAL-clover.zip, see this link :
Changelog :
- Sept Security Patch
- Update cam HAL to LA.UM.10.2.1.r1-03300-sdm660.0.
- Switch to 4.19 Nyx kernel
Installation instructions :
- Perform a backup of your current ROM (optional)
- Use latest 4.19 twrp created by pix106: https://androidfilehost.com/?fid=15664248565197205779)
- Reboot into recovery/twrp, format data, then reboot into recovery/twrp again.
- Flash ROM.
- Flash GApps is optional.
What's not working:
Let me know.
Known issues :
- Disabled Encryption
Please post the bug along with log (use syslog).
Source :
Kernel : clover
Device tree : sdm660
Update : latest version lineage-19.0-20211105-UNOFFICIAL-clover-new.zip pass safetynet.
Tried already in a mi pad 4 (8") and everything working so far.
Great work!
Does it support Monet theming?
Everything works OK, except I cannot change battery indicator (to circle, it just stays battery-shaped) and also can't show battery's %
Just nothing happens when i try to change these
redcord said:
Everything works OK, except I cannot change battery indicator (to circle, it just stays battery-shaped) and also can't show battery's %
Just nothing happens when i try to change these
Click to expand...
Click to collapse
Yes...some features are still not working as it depends on lineage source.
Installed Ok and runs - but with a few issues. Playstore not certified. Android system intelligence crashes regularly. It insisted on formatting my SD card so I let it but now I will have to put back all my music and books. Never mind. I will keep using it and updating for now.
Plus: I just tried my Bluetooth earbuds. They paired fine and are working with aptX
Plus: USB PD charger gives Charging rapidly
Everything works OK, except stop working Android System intelligence
Mi pad 4 (8") Wifi
GregEden said:
Installed Ok and runs - but with a few issues. Playstore not certified. Android system intelligence crashes regularly. It insisted on formatting my SD card so I let it but now I will have to put back all my music and books. Never mind. I will keep using it and updating for now.
Plus: I just tried my Bluetooth earbuds. They paired fine and are working with aptX
Plus: USB PD charger gives Charging rapidly
Click to expand...
Click to collapse
Playstore is certfied using patched boot.img by magisk and magisk hide. I didn't test using android system inteligence...will check later.
It's beautiful and quite stable, but with some minor issues.
1. Android System Intelligence keeps stop working. There's already a workaround by installing "ExtraPixel" module from this channel https://t.me/randomfilezz, but I suggest to make a fix inside the ROM.
2. Yep, Monet theming engine, ported by @kdrag0n , is open-sourced, so maybe consider adding it and makes it a better ROM. https://www.xda-developers.com/android-12-material-you-theming-system-recreated/
3. Always on display feature missing. Maybe you forgot to add it.
And the clock position and size on lock screen without notification is not accurate, compared to other devices.
Ralph Chen said:
And the clock position and size on lock screen without notification is not accurate, compared to other devices.
Click to expand...
Click to collapse
Did you compared to other device that running with lineageos 19.0?
Ralph Chen said:
It's beautiful and quite stable, but with some minor issues.
1. Android System Intelligence keeps stop working. There's already a workaround by installing "ExtraPixel" module from this channel https://t.me/randomfilezz, but I suggest to make a fix inside the ROM.
2. Yep, Monet theming engine, ported by @kdrag0n , is open-sourced, so maybe consider adding it and makes it a better ROM. https://www.xda-developers.com/android-12-material-you-theming-system-recreated/
3. Always on display feature missing. Maybe you forgot to add it.
Click to expand...
Click to collapse
Those features will be on this device once it is available in lineage source.
sabar_op said:
Did you compared to other device that running with lineageos 19.0?
Click to expand...
Click to collapse
I compared with other ROMs such as pixel experience.
Maybe it has to be in the center of the screen.
Ralph Chen said:
I compared with other ROMs such as pixel experience.
Maybe it has to be in the center of the screen.
Click to expand...
Click to collapse
Not sure about that, perhaps it is new style of lineageos 19..or lineage source not implemented yet to center the clock in the lockscreen...
My microphones are not working, via wired or bluetooth connections.
And the internal mic is dead too.
GregEden said:
My microphones are not working, via wired or bluetooth connections.
And the internal mic is dead too.
Click to expand...
Click to collapse
Are you sure? I am test it using mictest...and it works properly.
sabar_op said:
Are you sure? I am test it using mictest...and it works properly.
Click to expand...
Click to collapse
OK it works now. I did a reboot, and that did not help. I went into the recorder settings and toggled autodetect off then back on. And now it is working. I will test again tomorrow with my Duolingo lesson.
Dear all, may I ask for help please? I just manager to load 19.0 by following the above steps. However when it comes to the initial set up page, where it says checking for updates, it goes blank. How do I resolve this?
Btayyyy said:
Dear all, may I ask for help please? I just manager to load 19.0 by following the above steps. However when it comes to the initial set up page, where it says checking for updates, it goes blank. How do I resolve this?
Click to expand...
Click to collapse
I had that issue but I do not remember how I resolved it. I think I just kept swiping up until I could select next and it move on.