Latest rom : lineage-19.1-20220928-UNOFFICIAL-clover.zip, see this link :
Changelog :
- Sept Security Patch
- Update cam HAL to LA.UM.10.2.1.r1-03300-sdm660.0.
- Switch to 4.19 Nyx kernel
Installation instructions :
- Perform a backup of your current ROM (optional)
- Use latest 4.19 twrp created by pix106: https://androidfilehost.com/?fid=15664248565197205779)
- Reboot into recovery/twrp, format data, then reboot into recovery/twrp again.
- Flash ROM.
- Flash GApps is optional.
What's not working:
Let me know.
Known issues :
- Disabled Encryption
Please post the bug along with log (use syslog).
Source :
Kernel : clover
Device tree : sdm660
Update : latest version lineage-19.0-20211105-UNOFFICIAL-clover-new.zip pass safetynet.
Tried already in a mi pad 4 (8") and everything working so far.
Great work!
Does it support Monet theming?
Everything works OK, except I cannot change battery indicator (to circle, it just stays battery-shaped) and also can't show battery's %
Just nothing happens when i try to change these
redcord said:
Everything works OK, except I cannot change battery indicator (to circle, it just stays battery-shaped) and also can't show battery's %
Just nothing happens when i try to change these
Click to expand...
Click to collapse
Yes...some features are still not working as it depends on lineage source.
Installed Ok and runs - but with a few issues. Playstore not certified. Android system intelligence crashes regularly. It insisted on formatting my SD card so I let it but now I will have to put back all my music and books. Never mind. I will keep using it and updating for now.
Plus: I just tried my Bluetooth earbuds. They paired fine and are working with aptX
Plus: USB PD charger gives Charging rapidly
Everything works OK, except stop working Android System intelligence
Mi pad 4 (8") Wifi
GregEden said:
Installed Ok and runs - but with a few issues. Playstore not certified. Android system intelligence crashes regularly. It insisted on formatting my SD card so I let it but now I will have to put back all my music and books. Never mind. I will keep using it and updating for now.
Plus: I just tried my Bluetooth earbuds. They paired fine and are working with aptX
Plus: USB PD charger gives Charging rapidly
Click to expand...
Click to collapse
Playstore is certfied using patched boot.img by magisk and magisk hide. I didn't test using android system inteligence...will check later.
It's beautiful and quite stable, but with some minor issues.
1. Android System Intelligence keeps stop working. There's already a workaround by installing "ExtraPixel" module from this channel https://t.me/randomfilezz, but I suggest to make a fix inside the ROM.
2. Yep, Monet theming engine, ported by @kdrag0n , is open-sourced, so maybe consider adding it and makes it a better ROM. https://www.xda-developers.com/android-12-material-you-theming-system-recreated/
3. Always on display feature missing. Maybe you forgot to add it.
And the clock position and size on lock screen without notification is not accurate, compared to other devices.
Ralph Chen said:
And the clock position and size on lock screen without notification is not accurate, compared to other devices.
Click to expand...
Click to collapse
Did you compared to other device that running with lineageos 19.0?
Ralph Chen said:
It's beautiful and quite stable, but with some minor issues.
1. Android System Intelligence keeps stop working. There's already a workaround by installing "ExtraPixel" module from this channel https://t.me/randomfilezz, but I suggest to make a fix inside the ROM.
2. Yep, Monet theming engine, ported by @kdrag0n , is open-sourced, so maybe consider adding it and makes it a better ROM. https://www.xda-developers.com/android-12-material-you-theming-system-recreated/
3. Always on display feature missing. Maybe you forgot to add it.
Click to expand...
Click to collapse
Those features will be on this device once it is available in lineage source.
sabar_op said:
Did you compared to other device that running with lineageos 19.0?
Click to expand...
Click to collapse
I compared with other ROMs such as pixel experience.
Maybe it has to be in the center of the screen.
Ralph Chen said:
I compared with other ROMs such as pixel experience.
Maybe it has to be in the center of the screen.
Click to expand...
Click to collapse
Not sure about that, perhaps it is new style of lineageos 19..or lineage source not implemented yet to center the clock in the lockscreen...
My microphones are not working, via wired or bluetooth connections.
And the internal mic is dead too.
GregEden said:
My microphones are not working, via wired or bluetooth connections.
And the internal mic is dead too.
Click to expand...
Click to collapse
Are you sure? I am test it using mictest...and it works properly.
sabar_op said:
Are you sure? I am test it using mictest...and it works properly.
Click to expand...
Click to collapse
OK it works now. I did a reboot, and that did not help. I went into the recorder settings and toggled autodetect off then back on. And now it is working. I will test again tomorrow with my Duolingo lesson.
Dear all, may I ask for help please? I just manager to load 19.0 by following the above steps. However when it comes to the initial set up page, where it says checking for updates, it goes blank. How do I resolve this?
Btayyyy said:
Dear all, may I ask for help please? I just manager to load 19.0 by following the above steps. However when it comes to the initial set up page, where it says checking for updates, it goes blank. How do I resolve this?
Click to expand...
Click to collapse
I had that issue but I do not remember how I resolved it. I think I just kept swiping up until I could select next and it move on.
Related
XenonHD ROM for Xiaomi Mi Mix 2
A Team Horizon ROM
Based on AOSP r36 7.1.2
This ROM has all the features XenonHD has to offer.
All hardware functions including:
NFC
Bluetooth Audio
Fingerprint Scanner
Doze & Wake-up Gestures (dtw works after the first reboot)
And...many more things.
Magisk is no longer built in, so you'll need to flash it when first installing, and after every dirty flash.
VoLTE doesn't work (at least on T-Mobile). I believe most of the pieces are in place, but there may be something in the firmware that's preventing it? If I could figure out how to tap into the stock cust files, I might be able to figure out how to get it working.
Proximity Sensor is working:
Notification Light:
I have slowed down the notification light so it isn't all amped up. To make it completely usable, go to:
Fixed default notification blinks for built-in apps so they are slowed down without needing to go to settings.
For use-installed apps, add them to custom notification list in settings > notifications > gear icon > notification light > + in upper right corner > select app. Apps added to that list will have slow notification blinks.
I simply cannot find a way to make user-installed app notifications behave the same as built-in apps. Grrr!!
I have also made the light sensor wait longer before dimming the screen. This helps with left-handed activities blocking the light sensor and almost immediately dimming the screen.
Reduced time to go back from dim to bright. Screen will dim after 5 seconds, returns to bright after 2 seconds.
I've remove configpanel & pocketmode...they did little to nothing, and may have caused more battery drain than I care for.
Required prior to installing:
Unlock Bootloader
Install custom recovery: https://www.androidfilehost.com/?fid=962021903579490303
HUGE thanks to IceMan for bringing this to Mix 2!
A quirk with this TWRP: This one looks for backups in TWRP/BACKUPS/MIX_2 folder. Normally, the MIX_2 folder is named after serial number of your device.
So, you existing backups won't be found until you rename the folder in BACKUPS to MIX_2.
Installation Instructions:
Dirty flash is now available with the above TWRP and 10-26-2017 rom.
Download the most recent build: https://www.androidfilehost.com/?fid=673791459329071426
Download Gapps (I use Open Gapps Mini) --> http://opengapps.org/
All versions from 10-24-2017 are now encryptable.
From TWRP Recovery:
IF COMING FROM MIUI-BASED ROM: FULL WIPE AND FORMAT DATA!!
If you encounter ERROR 7, during XenonHD install, install Global MIUI ROM, then do full wipe and data format again, then install XenonHD rom.
If coming from AOSP-based ROM:
- Full wipe (Cache, Davlik/ART Cache, System & Data)
- Flash ROM zip
- Flash Gapps zip
Huge thanks to Mokee for bringing this device up and making a great place to start.
Also a very HUGE thanks to @Arasthel for his work on proximity sensor and figuring out the bluetooth reboot stuff and other hints, suggestions and incalculable work.
I'd also like to thank all of you folks here for trying this ROM and providing constructive feedback.
In addition, I appreciate your patience when issues come up that need to be fixed. I am not a developer, and I have a full time job and a wife that takes precedence most of the time
Sources:
Vendor:
https://github.com/hondajohn88/android_vendor_xiaomi_msm8998-common
https://github.com/hondajohn88/android_vendor_xiaomi_chiron/tree/xenonhd
Kernel:
https://github.com/hondajohn88/android_kernel_xiaomi_msm8998/tree/xenonhd
Device:
https://github.com/hondajohn88/android_device_xiaomi_chiron/tree/xenonhd
https://github.com/hondajohn88/android_device_xiaomi_msm8998-common/tree/xenonhd
reserved
reserved 2
Does safety net pass with or without magisk?
subashchandran said:
Does safety net pass with or without magisk?
Click to expand...
Click to collapse
With magisk its working
Gesendet von meinem MI Mix 2 mit Tapatalk
THX for the ROM @hondajohn88 ,very much appreciated. :good:
Is this 1st release identical to the beta?
Just curious,as I tried to dirty flash over the beta & got the same errors as if coming from another ROM (wouldn't flash).
Is a full wipe (less formatting data) necessary if updating ?
I don't mind setting up from new again,even if just updating from the beta build.
However,wondering if incremental updates are going to be an option on future builds.
THX.
Sent from my MI Mix 2 using XDA Labs
Bluetooth seems to be working fine for audio/calls. Need to try video/youtube audio output on car (will do it on the drive back home)
ROM is slick, its been good so far (2 hours since i have set everything up)
KOLIOSIS said:
THX for the ROM @hondajohn88 ,very much appreciated. :good:
Is this 1st release identical to the beta?
Just curious,as I tried to dirty flash over the beta & got the same errors as if coming from another ROM (wouldn't flash).
Is a full wipe (less formatting data) necessary if updating ?
I don't mind setting up from new again,even if just updating from the beta build.
However,wondering if incremental updates are going to be an option on future builds.
THX.
Sent from my MI Mix 2 using XDA Labs
Click to expand...
Click to collapse
Oh yeah...I need to add that to the OP, for some reason, dirty flash won't work. There's a couple weird things with this build, one is I can't make a dirty build or it breaks Wi-Fi, and can't dirty flash. I don't know the reasons, but if I figure it out, I'll be sure to let everyone here know. It's an extreme pain in the ass.
subashchandran said:
Bluetooth seems to be working fine for audio/calls. Need to try video/youtube audio output on car (will do it on the drive back home)
ROM is slick, its been good so far (2 hours since i have set everything up)
Click to expand...
Click to collapse
Glad everything is working for you so far. Bluetooth audio in car should work (it does on mine), but I found the volume on the car set to zero so needed to turn that up. That was a brief "oh crap" moment that I thought it wasn't working lol
subashchandran said:
Does safety net pass with or without magisk?
Click to expand...
Click to collapse
I think it fails without it, but magisk is built in, so if have to remove it to find out for sure.
hondajohn88 said:
Oh yeah...I need to add that to the OP, for some reason, dirty flash won't work. There's a couple weird things with this build, one is I can't make a dirty build or it breaks Wi-Fi, and can't dirty flash. I don't know the reasons, but if I figure it out, I'll be sure to let everyone here know. It's an extreme pain in the ass.
Click to expand...
Click to collapse
IT'S ALL GOOD @hondajohn88 . :good:
This ROM is daily-driver material,every update from here on out is a bonus & very much appreciated. :good:
hondajohn88 said:
Oh yeah...I need to add that to the OP, for some reason, dirty flash won't work. There's a couple weird things with this build, one is I can't make a dirty build or it breaks Wi-Fi, and can't dirty flash. I don't know the reasons, but if I figure it out, I'll be sure to let everyone here know. It's an extreme pain in the ass.
Click to expand...
Click to collapse
It seems that we both have faced this issue. I just got A2DP working yesterday on Resurrection Remix by using sagit as base - without msm-8998 common and all that -, imagine my surprise when I saw you also did .
Anyway, I think the WiFi bug may be related to something going wrong in the build. When you build the ROM, kernel sources are used and you can see that the wlan.ko module is built. The problem is, wlan.ko is also a binary blob found in vendor. I believe that on the 2nd build, if dirty, one of these modules overwrites the other - which worked. Maybe you can test this idea, I will be doing it too on the next days.
Arasthel said:
It seems that we both have faced this issue. I just got A2DP working yesterday on Resurrection Remix by using sagit as base - without msm-8998 common and all that -, imagine my surprise when I saw you also did .
Anyway, I think the WiFi bug may be related to something going wrong in the build. When you build the ROM, kernel sources are used and you can see that the wlan.ko module is built. The problem is, wlan.ko is also a binary blob found in vendor. I believe that on the 2nd build, if dirty, one of these modules overwrites the other - which worked. Maybe you can test this idea, I will be doing it too on the next days.
Click to expand...
Click to collapse
That's cool you got the Bluetooth working on RR, knocking little things out one by one ?
Thanks for the idea on the Wi-Fi, I'll look into that this evening. Maybe there's a file I can delete before dirtybuilding. That would make testing things a lot faster! ??
By the way, does android auto work on your rr?
Everything except proximity sensor works and works as good as stock. I have installed custom font, black swift substratum OMS theme without any hiccups. The rom is buttery smooth and I've been getting a better battery drain trend on this compared to resurrection/mokee. I have naptime doze installed to see if i can ooze out more battery goodness to the levels of epic Rom(miui 9)
Overall this is super encouraging to see a daily driver rom this early for mi mix 2.
There is one edge case which might be a bug, when connected on car Bluetooth and watching something on YouTube.. And then you get a call, i pressed answer on the car knobs/buttons.. I couldn't hear the person talking.. Car was displaying "audio disabled message ”. But talking/call and video/music in isolation works just fine.
Android auto works for me. I'm on RR now. Might come to this if we can get Android auto working. How did you guys fix your Bluetooth audio on RR (we can move this to the RR thread if you prefer) @Arasthel
slyyke said:
Android auto works for me. I'm on RR now. Might come to this if we can get Android auto working. How did you guys fix your Bluetooth audio on RR (we can move this to the RR thread if you prefer) @Arasthel
Click to expand...
Click to collapse
Thanks for the info about android auto on RR. I'll take a look at their repo and see if I messed up a USB setting somehow.
As far as I'm concerned, other ROMs can be discussed here.
Open source should be crowd sourced for maximum problem resolution.
RR probably (?) Did the same as me... Mokee made a commit in qcom/audio that did the trick.
hondajohn88 said:
That's cool you got the Bluetooth working on RR, knocking little things out one by one
Thanks for the idea on the Wi-Fi, I'll look into that this evening. Maybe there's a file I can delete before dirtybuilding. That would make testing things a lot faster! ?
By the way, does android auto work on your rr?
Click to expand...
Click to collapse
Hi... Thank you again for the wlan.ko tip. I deleted all instances of that in my out folder, dirty built and it's all good. Sped up my test time considerably! Woohoo! :good:
Thanks op for adding this to to the mix. Much appreciated. I am not sure if I can leave Resurrection due to all the customization options. Does this room offer as many customization options? Thanks so much!
stu5797 said:
Thanks op for adding this to to the mix. Much appreciated. I am not sure if I can leave Resurrection due to all the customization options. Does this room offer as many customization options? Thanks so much!
Click to expand...
Click to collapse
I haven't used rr for this phone, but I think at this point rr probably has more options. This one has quite a few, and as son as I get most of this ROM straightened out, I'll try adding more options.
I'll add some screen shots of the settings to help people decide.
Thanks ?
Great work by a great Dev,
Thanks for putting in the work, smoothhhh rom~
So, this is how I PERSONALLY got a pretty decent experience on phhussons P GSI.
I am not responsible if something doesn't work or doesn't work the way you want.
Update: The PixelExperience build over on the Treble section works pretty well and eliminates the need for Overlays_Pr1.zip as well as Bitgapps. It's also including gapps (with SetupWizard as well as the pixel launcher). Same bugs as listed below.
Step 1: Trebleizing your phone
Download the latest trebleized Lineage OS ROM by SGCMarkus here and install it.
Make sure to read his guide to repartition your device carefully, otherwise this won't work.
Step 2: Prerequesites to have a nice time with Android P.
Before we wegin with the GSI stuff, you will have to copy the build.prop [or if you have the device fingerprint for your phone, just copy that] to a safe location.
Step 3: Installing the GSI
Download phhusson's latest Pie GSI from here
Unzip it and load it onto your phone's storage.
Proceed with wiping your /system, /data, /cache and Dalvik. Do not wipe /vendor (duh.)
Then install the image by tapping "Install image" button in the selection screen.
Step 4: Installing GAPPS
Download BitGapps from here. (I do **not** recommend using unofficial OpenGapps, as I run into several issues with them.)
[This version of GApps does not include any SetupWizard, which means you will have to download all your apps manually!]
Step 5: Fixing Device not Certified
While the notification doesn't pop up, it is indeed not certified and is (one of) the reason(s) why the phone gets so hot sometimes.
So what you need to do is download Magisk 16.7 (or later) as well as MagiskPropsHideConfig from here
as well as get any terminal app from the Play Store you like. [I personally like Material Terminal, as you can copy/paste in it]
After doing that, open a terminal window and type "props" (without quotation marks). Then select 1 and enter your device fingerprint (either from the build.prop we saved earlier or the fingerprint you saved somewhere)
Step 6: Makin' it nice.
So most of this besides maybe the Vibrator are purely optional, so you can go and enjoy some Pie if you wish.
Vibration:
- reboot to TWRP
- mount /vendor
- Install SGC's sGSI fix from here
- Install temp_vib_fix_joan_v2.zip from the attached files. Doesn't fix the dullness that occurs after some time.
DT2W:
- reboot to TWRP
- mount /system
- Install dt2w_on_gsi_joan.zip
Proper rounded corners and that new navbar[not required on PE P GSI]:
- Reboot to TWRP
- mount /vendor
- Install Overlays_PR1.zip from the attached files. (not mine, it's from erfanoabdi's Telegram group, will add proper credits if i manage to find the creator)
- Navigate to Settings -> System -> Gestures -> Swipe up to home
Additional System Accents (Yay! Colors!)
- Reboot to TWRP
- Install System_Accents_P.zip from the attached files. (not mine, it's from erfanoabdi's Telegram group, will add proper credits if i manage to find the creator)
Always-on Display (DT2W still works!)[Not required on PE P GSI]
According to phhusson, this does more than just enable AOD apparently, and it does something with the vibration, so installing this is on **your own risk** (not like it wasn't anyways)
-Reboot to TWRP
- Install P_AOD_FIX_-_by_ElHechicero.zip (not mine, credit goes to ElHechicero)
Getting Wellbeing [Not requried on PE GSI]:
-Download the Wellbeing.apk from ApkMirror
-Rename it to WellBeing.apk
-Move it into /system/priv-app/WellBeing/ (create the folder WellBeing)
-Reboot
Getting a nicer launcher with the appdrawer[PE P GSI uses the Pixel Launcher]:
-Download Nokias (HMDs) Launcher from ApkMirror
-Rename it to Quickstep.apk
-Replace /system/priv-app/Quickstep/Quickstep.apk with the Nokia launcher (which you renamed to Quickstep)
-Reboot
Issues:
- A lag when tapping on the "Default Apps" or the Bluetooth/NFC area in Settings
- Can get warmer when in playstore
- Vibration: Gets dull and sounds like static after a while. Hopefully SGCMarkus will be able to fix this or we'll be stuck with the dullness on P gsi's for now.
Not working:
-Hotspot
-NFC (?) [Seemed to work just fine on my device]
- Let me (or others, rather.) know.
Credits go to:
SGCMarkus
the LG V30 telegram group for the pointers
erfanoabdi's telegram group
ElHechicero
phhusson
FAQs:
Is Launcher <Insert Launcher Name here> compatible?
- Any launcher is but don't expect the new Recents-Appdrawer to work.
Does the DAC work?
- Only in certain apps, as for all AOSP roms.
Screenies in attachments
You did a good job! I'm happy to have android pie on v30 but does its dac still not work?
thanks for the tutorial,
depending on your experience, do you think it suitable as a daily driver (I don't mind with the quad DAC) ?
Panokiaran said:
You did a good job! I'm happy to have android pie on v30 but does its dac still not work?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=77389334&postcount=15
Onkyo HF Player
USB Audio Player PRO
both are able to utilize the quad dac,
with the 2nd you can even use it with streaming
dr.guru said:
thanks for the tutorial,
depending on your experience, do you think it suitable as a daily driver (I don't mind with the quad DAC) ?
Click to expand...
Click to collapse
If you don't depend on Hotspot (and maybe NFC) and don't mind the occasional dullness, then yes. It is very daily driver capable. I'm using it.
Saxithon said:
If you don't depend on Hotspot (and maybe NFC) and don't mind the occasional dullness, then yes. It is very daily driver capable. I'm using it.
Click to expand...
Click to collapse
Any comments on battery life ?
Saxithon said:
Update: The PixelExperience build over on the Treble section works pretty well and eliminates the need for Overlays_Pr1.zip as well as Bitgapps. It's also including gapps (with SetupWizard as well as the pixel launcher). Same bugs as listed below.
Click to expand...
Click to collapse
is this the proper image: click ?
So this will eliminatre the need to install bitggaps, but I still need to go through points 5 and 6, right?
Is Nova compatible with this setup?
zacharias.maladroit said:
https://forum.xda-developers.com/showpost.php?p=77389334&postcount=15
Onkyo HF Player
USB Audio Player PRO
both are able to utilize the quad dac,
with the 2nd you can even use it with streaming
Click to expand...
Click to collapse
Thanks your
rdeets said:
Is Nova compatible with this setup?
Click to expand...
Click to collapse
Any launcher is. Just the new Recents Appdrawer will only work with certain devices. As of now those are working: AOSP Quickstep, Nokia Quickstep(Also called Android One launcher), The Pixel launcher (but doesn't work by installing?? [works on the PE P GSI tho]) and sometime in the future Lawnchair V2.
pizmak said:
is this the proper image: click ?
So this will eliminatre the need to install bitggaps, but I still need to go through points 5 and 6, right?
Click to expand...
Click to collapse
Yup and yup.
zacharias.maladroit said:
https://forum.xda-developers.com/showpost.php?p=77389334&postcount=15
Onkyo HF Player
USB Audio Player PRO
both are able to utilize the quad dac,
with the 2nd you can even use it with streaming
Click to expand...
Click to collapse
if the dac not work with jetaudio and spotify than why treble !!! ?
Sent from my LGM-V300S using XDA Labs
seloka180 said:
if the dac not work with jetaudio and spotify than why treble !!!
Sent from my LGM-V300S using XDA Labs
Click to expand...
Click to collapse
Has nothing to do with treble... its aosp in general.
me2151 said:
Has nothing to do with treble... its aosp in general.
Click to expand...
Click to collapse
thank you
Sent from my LGM-V300S using XDA Labs
why can't you just backup your rom and make a zip file?
everything working good and smooth, but i only can not instal MagiskPropsHideConfig from magisk or TWRP,
and camera always force close, but then open camera doing well in PE room.
ahhh so great to taste the sweetest pie
thanks to you and others dev
much love
Arif Ferdian said:
everything working good and smooth, but i only can not instal MagiskPropsHideConfig from magisk or TWRP,
and camera always force close, but then open camera doing well in PE room.
ahhh so great to taste the sweetest pie
thanks to you and others dev
much love
Click to expand...
Click to collapse
Have the same issue. Fixed by going to TWRP, wipe cache & Dalvik and then reflash the Magisk 16.7 zip, then boot to OS and install MagiskPropsHideConfig.
@Saxithon your thread name suggests that @SGCMarkus is working on sth.
Will he make a flashable zip of the Pie ROM that we can flash without treblezing?
FcBayernMinga said:
@Saxithon your thread name suggests that @SGCMarkus is working on sth.
Will he make a flashable zip of the Pie ROM that we can flash without treblezing?
Click to expand...
Click to collapse
Im working on Pie, kinda, but atm im stuck somewhere...
Have to figure out wtf is going on there
Followed the treble parttioning guide, flashed EnesSastim pixel expirience rom, and im happy to report its working fine so far. Left my Ext sdcard in exfat fromat working well so far too. Did not need to recertify my device. And no error after the setup wizard. I will change the apn settign to see if i can get lte, so far i am 4g.
Edit: cant seem to be able to use camera, even with open camera app.
RevengeOS for LG V30
RevengeOS is an aftermarket firmware based on AOSP. We are dedicated to a beautiful, fast, stable and minimal customized ROM, honesty and communication with our users, and openness with our code, Hope you will enjoy.
Known Bugs:
Guide on AOSP ROMs, troubleshooting & recommendations
XDA doesn't allow Telegram and a few other site links so I'm taking down the thread as I don't want to post an incomplete guide. You may find the full guide here: https://bit.ly/3rGKKtQ , this will be the only place I maintain bugs and guides.
forum.xda-developers.com
Changelog:
- March Security Patch
- fixed USB issues(Android Auto, lsusb not detecting an id)
Download:
RevengeOS-4.0-R-UNOFFICIAL-joan-20210308-2309.zip
drive.google.com
Thanks to
@SGCMarkus for his device trees
Telegram Group:
LG V30
You can view and join @LGEV30 right away.
t.me
XDA:DevDB Information
[ROM] [Unofficial] RevengeOS 4.0 [11.0] [V30], ROM for the LG V30
Contributors
supremmotu, SGCMarkus
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Pie Blobs from Stock
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 3.2
Stable Release Date: 2020-08-22
Created 2020-08-22
Last Updated 2020-08-22
Does volte or vowifi work?
markdcouto said:
Does volte or vowifi work?
Click to expand...
Click to collapse
Of course not. No V30 LOS-based ROM has VoLTE and never will. That has to be present in the V30 parent LOS tree, and that Dev says it's basically impossible. So, it will never be a feature in a ROM based on V30 LOS. It's only possible in V30 stock-based custom ROMs like A.I.X.
Here's the V30 Custom ROMs FAQ -- which is linked in the WTF Instructions to read before you actually bootloader unlocked your phone. See #5.
RevengeOS 4.0 [11.0]
RevengeOS-4.0-R-UNOFFICIAL-joan-20210308-2309.zip
drive.google.com
Changelog:
- March Security Patch
- fixed USB issues(Android Auto, lsusb not detecting an id)
Download:
RevengeOS-4.0-R-UNOFFICIAL-joan-20210308-2309.zip
drive.google.com
Thanks to
@SGCMarkus for his device trees
Telegram Group:
LG V30
You can view and join @LGEV30 right away.
t.me
can you use microg with this rom?
I really like the build and speed of this. WiFi worked right out the gate which is what prompted me to ditch trying to get Android 10 working. The ROM doesnt include any of the google apps so I used NikGapps to get the store and things working.
The issue is that any games or apps request that i use the google play services which is already installed and running. Not sure how to overcome this. Anyone else have this problem and perhaps a solution?
Edit: Nevermind. I used the unofficial open gapps and it worked fine. I included it in the zip queue from TWRP when i flashed the rom. I did the following:
Manually wipe (format) your System partition
Flash your ROM
Flash Open GApps package
Wipe the Dalvik & cache
Reboot
Is it good for a daily?
@supremmotu
supremmotu
Any way you could upload the ROM to another file hosting service such as mega? When I try to download from the link it says there have been too many downloads in the past 24-hours.
Can't wait to test out Android 11 on this excellent device.
Edit: I was able to get through and download it
Can this rom work on korean Version?
V300L30p bootloader unlocker and twrp running.
packyman said:
Can this rom work on korean Version?
V300L30p bootloader unlocker and twrp running.
Click to expand...
Click to collapse
yes
So far so good (US998) - Wifi works, cell service works, GPS seems to work, tethering works. I'm running Magisk v22 fine, I installed Magisk App Debug and flashed Magisk-22.zip (just rename the apk to .zip) and MicroG works fine without the need to mess around with signature spoofing.
Edit: I could only get tethering to work from wifi, not mobile data (for internet access)
My only gripe is the always on display setting (always show time and info) glitches out so you can't really use it. If you try to turn the phone on the screen goes black and stays that way. I tried using a 3rd party app Always On Edge, but it uses too much battery to use aside from charging. FM Radio also doesn't work, but that isn't a deal breaker for the newest Android for me.
aventurer said:
My only gripe is the always on display setting (always show time and info) glitches out so you can't really use it. If you try to turn the phone on the screen goes black and stays that way. I tried using a 3rd party app Always On Edge, but it uses too much battery to use aside from charging. FM Radio also doesn't work, but that isn't a deal breaker for the newest Android for me.
Click to expand...
Click to collapse
Try the Always On AMOLED app from the store. I've been using that for the last year as an alternative to the broken AOD on Android 10. I haven't noticed any significant battery drain, perhaps because, as the name suggests, it's designed for AMOLED displays.
@Osprey00
Ty so much. This app seems a lot better. I had an issue at first where the permissions wouldn't go through, I just killed the app and cache and reloaded then it worked.
It also seemed to drain the battery a ton at first, but then I rebooted my phone and stopped messing with the settings so it seems fine now.
I also was wrong about tethering working, I could only get tethering to work via Wifi, not mobile data for internet, which defeats the purpose, maybe someone has some ideas viewing this?
aventurer said:
My only gripe is the always on display setting (always show time and info) glitches out so you can't really use it. If you try to turn the phone on the screen goes black and stays that way.
Click to expand...
Click to collapse
Even though you worked around it by using the app that I recommended and may even prefer to continue using it, I just saw this AOD fix on Telegram, credit to ɐoɔɐɾ:
This should fix the black screen bug when waking the device from sleep with aod on
This is tested and confirmed to work on DotOS and LineageOS A11, it is not for A10 and may not work on other A11 roms
Flash this after first boot, may not fix ddtw
Credit to @marvinhrivera for finding this fix
Click to expand...
Click to collapse
Hi, I have just flashed this ROM and it is great so far. Everything works fine exept finger print sensor. I am able to unlock the device etc. but sensor is not accessible in some apps (internet banking, Lastpass). Have you experienced this issue, too? It is a bit annoying, especially for these apps wher biometrics is essential. Thank you.
nekicz said:
Hi, I have just flashed this ROM and it is great so far. Everything works fine exept finger print sensor. I am able to unlock the device etc. but sensor is not accessible in some apps (internet banking, Lastpass). Have you experienced this issue, too? It is a bit annoying, especially for these apps wher biometrics is essential. Thank you.
Click to expand...
Click to collapse
yeah that's a known issue, should be fixed in the next build
sinkoo1979 said:
can you use microg with this rom?
Click to expand...
Click to collapse
Yes. Use the microg settings to grant the spoof permission (tap the unchecked "system spoofs signature" box to trigger the requst) and run
Code:
pm grant com.android.vending android.permission.FAKE_PACKAGE_SIGNATURE
Thanks for the build, it seems solid. Some minor features (e.g. edge lighting, voicemail notifications) that didn't work on HavocOS for me work out of the box here. There are only two issues so far:
- The styles and wallpapers system app doesn't work: it won't open whether accessed from the launcher or in the settings menu. I can change wall papers and icons using the shortcuts from long pressing on the home screen, but not theme/colors (it crashes if I pick that tab)
- I cannot get file transfer over USB to work; the phone doesn't show up in Windows explorer. It's not my box or cable; the same setup works just fine for USB debugging or file transfer in TWRP. I had the same issue on HavocOS, but there swapping off file transfer and back would trigger detection, but not on this ROM
This ROM has less customization than some (you can't swap the navbar layout, for example) but this looks nice. I'll try this out as a daily driver for a week or two and see.
EsotericScreenName said:
Yes. Use the microg settings to grant the spoof permission (tap the unchecked "system spoofs signature" box to trigger the requst) and run
Code:
pm grant com.android.vending android.permission.FAKE_PACKAGE_SIGNATURE
Thanks for the build, it seems solid. Some minor features (e.g. edge lighting, voicemail notifications) that didn't work on HavocOS for me work out of the box here. There are only two issues so far:
- The styles and wallpapers system app doesn't work: it won't open whether accessed from the launcher or in the settings menu. I can change wall papers and icons using the shortcuts from long pressing on the home screen, but not theme/colors (it crashes if I pick that tab)
- I cannot get file transfer over USB to work; the phone doesn't show up in Windows explorer. It's not my box or cable; the same setup works just fine for USB debugging or file transfer in TWRP. I had the same issue on HavocOS, but there swapping off file transfer and back would trigger detection, but not on this ROM
This ROM has less customization than some (you can't swap the navbar layout, for example) but this looks nice. I'll try this out as a daily driver for a week or two and see.
Click to expand...
Click to collapse
I fixed the USB issue by doing a reinstall and not using the stock kdz first (flashing directly to a fresh format). According to the dev, the styles app requires GApps, so it won't work if you use microG
I'm also having success with this ROM. I tried a couple of other (A 10 based) ROMs, but couldn't get the wifi to work despite loading old modems etc. Revenge appears to be fully functional (with the exception of spotty fingerprint access as noted above). For me the hotspot also worked straightaway.
Nice rom, simple whit FMradio application.
Installed on a freshly unlocked and rooted H930 with pico Gapps (open_gapps-arm64-11.0-pico-20210130-TEST.zip). But I'm stupid, I saw the instructions afterwards, and I didn't install a recent pie stock rom after the root, I've install directly this rom.
The wifi and USB transfer does not work. The wifi can be fixed with the fix for Android 10 : see here : https://forum.xda-developers.com/t/q-wifi-fix-for-north-american-variants.4012635/post-83473401.
Can I flash a stock rom now? which one?
It's that time of the year....
Recovery: download (6th Mar '21)
Gapps: download (16th Feb '21)
Lineage 18.1: download (8th Mar '21)
Please report stuff that doesn't work in this thread.
Update: 8th March
Recently fixed:
Bluetooth
Setting a lock screen
AUX / Line Out
Encryption
Gallery speed
Limitations of the current Lineage version:
VoLTE is disabled (will unfortunately not be able to fix that easily)
Dual SIM is not working (for devices that have Dual SIM)
Speakers do not sound as good as on stock
Camera is not as good as stock
Battery life when the screen is on is better on stock than on Lineage
------------
For developers:
device: https://review.lineageos.org/c/LineageOS/android_device_motorola_clark/+/304226/2
kernel: https://review.lineageos.org/c/LineageOS/android_kernel_motorola_msm8992/+/304218/1
vendor: https://github.com/chrmhoffmann/proprietary_vendor_motorola/tree/lineage-18.1
Note: Credits go to the usual lineage team from whom the device benefits enormously. Also the previous device maintainers have done a great job and we're still benefiting from that. E.g. the camera reverse engineering.
chrmhoffmann said:
It's that time of the year....
Recovery: download (16th Feb '21)
Gapps: download (16th Feb '21)
Lineage 18.1: download (16th Feb '21)
Please report stuff that doesn't work in this thread.
------------
For developers:
device: https://review.lineageos.org/c/LineageOS/android_device_motorola_clark/+/304226/2
kernel: https://review.lineageos.org/c/LineageOS/android_kernel_motorola_msm8992/+/304218/1
vendor: https://github.com/chrmhoffmann/proprietary_vendor_motorola/tree/lineage-18.1
Click to expand...
Click to collapse
Hello Chris, first of all, thanks for continuing on 18.1. I installed the rom and it booted fine. The set-up was buggy and laggy an kept crashing on setting up screen pattern. So I can't set screen pattern/pincode/password. Also I installed some apps from play store like whatsapp,gmail, telegram and they are doing fine. The phone gets hot and battery drains fast. Ambient display is a bit buggy, it's not working everytime. Anyways for the first build it's quite good. Thanks again
Maybe anybody else can also test?
Yes, setting up lock screen is broken. Will fix it in next build.
Chris
!
[QUOTE = "chrmhoffmann, post: 84511557, member: 361777"]
Да, не работает настройка экрана блокировки. Исправлю в следующей сборке.
Крис
[/ ЦИТИРОВАТЬ]
Dear Chris, everything is superb, but the function of broadcasting the screen in the quick settings menu does not work when connected (miracast) the phone is overloaded
I think bluetooth headsets are broken.
Chris
chrmhoffmann said:
I think bluetooth headsets are broken.
Chris
Click to expand...
Click to collapse
I can confirm that, it connects with my Haylou GT1 Pro but no sound.
Fixed. Uploading new build that fixes bluetooth and screen lock.
Note: If you have previously tried to setup lock screen, you will have to reset device (factory reset/wipe). Otherwise the device will crash right after bootanim stops. Sorry for that!!!
chrmhoffmann said:
Fixed. Uploading new build that fixes bluetooth and screen lock.
Note: If you have previously tried to setup lock screen, you will have to reset device (factory reset/wipe). Otherwise the device will crash right after bootanim stops. Sorry for that!!!
Click to expand...
Click to collapse
Thank you Chris, bluetooth and screen lock are fixed!
chrmhoffmann said:
Fixed. Uploading new build that fixes bluetooth and screen lock.
Note: If you have previously tried to setup lock screen, you will have to reset device (factory reset/wipe). Otherwise the device will crash right after bootanim stops. Sorry for that!!!
Click to expand...
Click to collapse
Can it be dirty flashed or should we do a clean install? It's cumbersome working with LOS recovery so the less I have to deal with it the better. Other than recovery it's a nice smooth rom. Thanks again
Wheels564 said:
Can it be dirty flashed or should we do a clean install? It's cumbersome working with LOS recovery so the less I have to deal with it the better. Other than recovery it's a nice smooth rom. Thanks again
Click to expand...
Click to collapse
I did a clean install, you can try dirty flash.
moviefirst said:
I did a clean install, you can try dirty flash.
Click to expand...
Click to collapse
I did a clean install. Since I have two of these phones I'm using this one for testing purposes for now and have 14.1 on the other one for daily use. At some point I'll change over to the 18.1 phone. I really like that dark theme is enabled on this rom that 14.1 never had It helps save battery.
which version of magisk will work?
Could someone test Netflix?
chrmhoffmann said:
Could someone test Netflix?
Click to expand...
Click to collapse
Seems to work fine in the U.S. on wifi. I'll let it run for a while to make sure it's stable. It appears to be running 1080p.
chrmhoffmann said:
Could someone test Netflix?
Click to expand...
Click to collapse
Netflix working here in the Netherlands, but the phone is lagging and takes time to open apps. Also I think battery was better in 17.1
In the camera I've noticed there's no icon to save to sdcard. also unless they've change snap camera I can't get the back or home button to come up to exit camera. I have to long press the power button to get access to home icon.
[email protected] said:
which version of magisk will work?
Click to expand...
Click to collapse
Latest version 21.4 works.
Wheels564 said:
In the camera I've noticed there's no icon to save to sdcard. also unless they've change snap camera I can't get the back or home button to come up to exit camera. I have to long press the power button to get access to home icon.
Click to expand...
Click to collapse
.
Swipe down from top to see home button. Save to sd card did not work on 17.1 so he removed the icon. Thanks for helping me find new forum!
Link to gapps is not working here.
Sorry for partial reposting this from 17.1 forum. Seems very functional on WiFi. Phone does not read VZW SIM on boot and can't pick up APN. I had to choose VZWINTERNET APN. Then LTE works for 30 seconds. Data drops for maybe a minute, then falls back to 3G which works. If LTE worked I think we would be golden.
Also get "DM config update keeps stopping" error. Not sure if this is related to SIM. I used NikGapps but don't think it is related.
Photos can not access SD card but Files has no problem. Edit. My bad. Photos works fine.
kb8no said:
Latest version 21.4 works.
.
Swipe down from top to see home button. Save to sd card did not work on 17.1 so he removed the icon. Thanks for helping me find new forum!
Link to gapps is not working here.
Sorry for partial reposting this from 17.1 forum. Seems very functional on WiFi. Phone does not read VZW SIM on boot and can't pick up APN. I had to choose VZWINTERNET VPN. Then LTE works for 30 seconds. Data drops for maybe a minute, then falls back to 3G which works. If LTE worked I think we would be golden.
Also get "DM config update keeps stopping" error. Not sure if this is related to SIM. I used NikGapps but don't think it is related.
Photos can not access SD card but Files has no problem.
Click to expand...
Click to collapse
Get a logcat when your trying to use LTE for Chris. I don't have a sim in my 18.1 phone or I would.
Link to MindTheGapps from OP is obsolete and updated link found on LOS link. I used NikGapps before and started over with clean flash using MindTheGapps but found it made no difference. Phone still does not read VZW SIM on boot and can't pick up APN. I had to again manually choose VZWINTERNET APN. Then LTE works for 30 seconds. Data drops for maybe a minute, then falls back to 3G which works and I get about 2 Mbps. Continue to get error "DM config update keeps stopping". I now believe this is related.
Has anybody yet tried TWRP from 17.1 thread?
Advanced restart is missing from developer options.
Addendum: I put in my ATT SIM. It found the APN and imported it correctly. It started LTE and similarly died. Data never came back at a lower rate.
I'm not responsible for any damage to your device.
By flashing this you take responsibility of anything that happens to it.
Process at your own risk!
AND FEEL GOOD!
Now it is time to upgrade our P901 to Android 10 QWork
Almost all, I thinks but please give a feedback for any problem and suggestion.
Now P901 can make gsm call / sms / full cellular network.
BT SCO voice call working perfectly on narrow/wide band.
Preinstall v4afx to data partition and working good.
Camera (internal app) can take picture only now.
Video recorder working with app ,like HedgeCam 2, which supports Camera2 API.
Known Issues
- Video recording not working
- S-pen randomly freeze and reboot, still.
- Feedback sound enable will breaks Sound system, Don't enable any feed back sound.
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Full wipe all
4. Flash firmware and gapps
Sources:
https://github.com/Lineageos
https://github.com/LineageOS/android_hardware_samsung
https://github.com/LineageOS/android_hardware_samsung_slsi_exynos
https://github.com/LineageOS/android_hardware_samsung_slsi_exynos5
https://github.com/khomsn/android_hardware_samsung_slsi_openmax
https://github.com/khomsn/android_hardware_samsung_slsi_exynos5420
Kernel: https://github.com/khomsn/android_kernel_samsung_v1a3g
Device: https://github.com/khomsn/device_samsung_v1a3g
Vendor: https://github.com/khomsn/vendor_samsung_v1a3g
THANKS & CREDITCredit to All developers that do share codes to our community and Thank to all of them and you , that makes this ROM.
Spacial Thanks to Valera1978 and ShevT for his kernel base / device prototype.
Spacial Thanks to universal5433 for device prototype.
Credit to v4afx developer viper4android
ROM DOWNLOAD / Change Logs go to Post # 2.
Download ROM Here16/11/21 Last update (11/11/21 broke the bluetooth sco) now fixed.
Spen still random freeze and reboot.
Don't enable Touch sound , it will break sound system.
11/11/21 Working Camera, and Auto Call Recorder (if it is allowed in your area)
now preinstall ViperFx , Galaxy Store , to Data partition if it not yet install,
Spen is fixed ( I hope , Thanks to ShevT for fixed, I applied his patch so, he said no more freeze and reboot).
31/8/21 ViperFx work
Remove Viper4Android for preinstall but still include lib, you must install Viper4Android , I use this package and it work, viperfx_2.7.2.1.apk . This version you can Change , cpu governor, swappiness, mount-bind ext sd card folder to internal folder.
Spen is same issue , also the Camera.
15/6/21 update BT SCO voice calling, IR and Samsung audio.
This built, update BT SCO driver hal to enable voice call both gsm and voip. IR is working perfectly now. Audio less plop sound or XRUN less.
Replace pre-audioprocessing with android lib -> no echo on caller side when using voip now.
27/4/21 with Samsung Audio - Initial Release
Log: Initial release with Samsung Audio , which cannot use DEEP_BUFFER_PLAYBACK so sometime you will hear plop sound and absent sound.
27/4/21 with v1a Audio Hal - Initial Release
Log: Initial release with Samsung Audio , which can use DEEP_BUFFER_PLAYBACK so sometime you will hear less plop sound and absent sound. This one gives smooth sound.
TWRP for v1a3gxx is here. Use this one to flash. This update , you can easily check+fix file patition of internal storage with this command on terminal of TWRP "chfixfs".
Please how do we get access?
kaengselllley said:
Please how do we get access?
Click to expand...
Click to collapse
Sory, I forgot to open for public. Now you can access.
khomsn said:
Sory, I forgot to open for public. Now you can access.
Click to expand...
Click to collapse
thanks
I'm getting "Error executing updater binary in zip ....."
khomsn said:
Sory, I forgot to open for public. Now you can access.
Click to expand...
Click to collapse
thanks
I'm getting "Error executing updater binary in zip ....."
Use This TWRP
i flash Viper4Android v.2.7.2.1 using magisk, is not working, and i use transparent clock & weather, it can not detect the current location, please advise.
Thanks.
khomsn said:
Use This TWRP
Click to expand...
Click to collapse
Thank you for the help
RW168 said:
i flash Viper4Android v.2.7.2.1 using magisk, is not working, and i use transparent clock & weather, it can not detect the current location, please advise.
Thanks.
Click to expand...
Click to collapse
Magisk Latest update not compatible with Viper4Android
khomsn said:
Magisk Latest update not compatible with Viper4Android
Click to expand...
Click to collapse
when use this rom [ROM][SM-P900][UNOFFICIAL] Lineage 17.1 | Android 10 Q |, viper4android works fine. its not magisk problem..
Is it possible to remove spen feature from thr rom and prevent reboot??
mvdarwin said:
Is it possible to remove spen feature from thr rom and prevent reboot??
Click to expand...
Click to collapse
mvdarwin said:
Is it possible to remove spen feature from thr rom and prevent reboot??
Click to expand...
Click to collapse
don't use spen for now
Hi Khomsn, thanks for the Rom, i flashed the new rom, but earphone using jack is not working, only working with tablet speaker, please advise, thanks.
RW168 said:
Hi Khomsn, thanks for the Rom, i flashed the new rom, but earphone using jack is not working, only working with tablet speaker, please advise, thanks.
Click to expand...
Click to collapse
Do you have previous backup for data partition, I had this problem before it is some error in data file that prevent audio route to function properly. So restore that partition and reinstall rom. Or rest to factory.
For Netflix , you have to download last version to sdcard an install. Play store not show and not allow to install.
But it works.
Hi Khomsn! First of all, thank you for the ROM and for the source codes. I have successfully build working rom using your sources.
I should notice, that for me S-Pen is working nice. First time - device indeed got frozen, and went to the reboot. But after this - no further S-Pen problems. Unfortunately, this is not working with the camera.
But, unfortunately I did not manage to get AFWall+ working. Even after adding NAT support to the kernel I am receiving errors from iptables.
ivan.odinets said:
Hi Khomsn! First of all, thank you for the ROM and for the source codes. I have successfully build working rom using your sources.
I should notice, that for me S-Pen is working nice. First time - device indeed got frozen, and went to the reboot. But after this - no further S-Pen problems. Unfortunately, this is not working with the camera.
But, unfortunately I did not manage to get AFWall+ working. Even after adding NAT support to the kernel I am receiving errors from iptables.
Click to expand...
Click to collapse
Source code is not up to date yet. Now source code is updated.
Camera error on this
libexynosv4l2: failed to ioctl: VIDIOC_QBUF (22 - Invalid argument)
libexynosv4l2: failed to ioctl: VIDIOC_REQBUFS (-1 - Invalid argument)
buf index always 0 .
Hi Khomsn, thanks for the rom. You make our note 12.2 survive through the years
One question about some notifications didn't get in previous unofficial lineage rom. This build is signed with a public key & SElinux deactivated... should I simply turn off the notification ? or any guidelines how i can resign myself the build and activate SElinux (can i use the source code to do that) ?
thank you again and the other devs for these fantastic roms