Junsun Android Radio - setting value problem. - MTCD Android Head Units General

I changed the values of the color settings sliders by mistake and now the display looks like the picture.
I also changed the default settings and can't go back to them now.
Please provide valid slider values. It is Android 12, MCU1: :07 (AC8259).
Please help

Is it an FYT based unit, post Android system information including MCU version

Thank you for your attention. I have completed the information.

marchnz said:
Is it an FYT based unit, post Android system information including MCU version
Click to expand...
Click to collapse
Please move the post to the appropriate section. I wrote to you by mistake. I'm new. Sorry

debe68 said:
Please move the post to the appropriate section. I wrote to you by mistake. I'm new. Sorry
Click to expand...
Click to collapse
No problem, just looking to help get in the right section and help for you.
Do you have details from Android system information, with that your head unit can be identified and perhaps questions asked

marchnz said:
No problem, just looking to help get in the right section and help for you.
Do you have details from Android system information, with that your head unit can be identified and perhaps questions asked
Click to expand...
Click to collapse
The unit is an AC8259 which is a MediaTek A53 unit. It is not a FYT, so the post should be moved to the general Android Head units sub-forum. I just requested that.

Related

Lots of apps crash on me

I am trying to get Carista OBD2 app working on my android auto headunit and it keeps crashing. Lots of other apps crash also. I use Malaysk firmware and am wondering if there is anything I can install that will fix this issue. I upgraded to the latest version of the firmware last month so I am up to date. Any info would be much appreciated since I am new to this stuff.
Thanks,
Riftur said:
I use Malaysk firmware and am wondering if there is anything I can install that will fix this issue. I upgraded to the latest version of the firmware last month so I am up to date.
Click to expand...
Click to collapse
Your head unit is not likely an Android Auto device...
Please read this forum section description.
If your MCU version starts with MTCB then the correct section is:
http://forum.xda-developers.com/android-auto/mtcb-android-head-unit-general
themissionimpossible said:
Your head unit is not likely an Android Auto device...
Please read this forum section description.
If your MCU version starts with MTCB then the correct section is:
http://forum.xda-developers.com/android-auto/mtcb-android-head-unit-general
Click to expand...
Click to collapse
Its a Eonon android head unit.
Any help with this? Carista just crashes on me every anytime I try to connect rob Bluetooth adapter!

Any User With EONON GA5165F for BMW E9x

Hi
Someone have at eonon GA5165F for BMW E9X?
I need to know the original configuration for this unit.
Rui tomas said:
Hi
Someone have at eonon GA5165F for BMW E9X?
I need to know the original configuration for this unit.
Click to expand...
Click to collapse
What do you mean by "original configuration" ?
Which head unit manufacturer is it ?
GA5165F BMW 323i E90 2011
typos1 said:
What do you mean by "original configuration" ?
Which head unit manufacturer is it ?
Click to expand...
Click to collapse
I may not be of any help now because I have flashed Malaysk May rom a few days after I received my unit.
I hope we can help each other in the future.
I'm, also, trying to findout WHAT and WHO is MTCB-ZD9-V2.72 ??? Was expecting KGL-790 for a BMW E90.
Here was my Malaysk install comments: http://forum.xda-developers.com/showpost.php?p=67143277&postcount=4486
Thank you all
noise672 said:
I may not be of any help now because I have flashed Malaysk May rom a few days after I received my unit.
I hope we can help each other in the future.
I'm, also, trying to findout WHAT and WHO is MTCB-ZD9-V2.72 ??? Was expecting KGL-790 for a BMW E90.
Here was my Malaysk install comments: http://forum.xda-developers.com/showpost.php?p=67143277&postcount=4486
Thank you all
Click to expand...
Click to collapse
It doesnt matter that you have flashed Malaysk's ROM - I think hes talking about the buttons when he says "configuration" which is MCU controlled not Android. But you still cant help as its not possible to get a copy of the MCU software from a unit.
"ZD9" units have been appearing recently, we dont know the name of the company yet (we may never), but its not that important as long as copies of MCU updates become available, check Malaysk's MCU thread. None there yet.

ALL (PX3-PX5-Intel Sofia) MTCD Updates and MCU Files

I'm not sure if this is aloud or has been posted already but I'd just like to thank the kind gents at 4PDA for the file host and their site !
I dont know if this is indeed all files but here is a ton if anyone is looking :good::good:
MCU Files for all units are in the 2nd folder
https://yadi.sk/d/umCvHqCDzHccr
Hi, i have a px3 unit hzc brand 7.1 rom. Can i use any of these px3 7.1 roms.
Thanks alot for this!
Skickat från min ONEPLUS A3003 via Tapatalk
Cid6.7 said:
I'm not sure if this is aloud or has been posted already but I'd just like to thank the kind gents at 4PDA for the file host and their site !
I dont know if this is indeed all files but here is a ton if anyone is looking :good::good:
MCU Files for all units are in the 2nd folder
https://yadi.sk/d/umCvHqCDzHccr
Click to expand...
Click to collapse
Thank you for this. Can you please make folder listing or at least explain what this file from attached picture is for? It looks like Oreo Image but it is RAR instead of ZIP?
Thanks a lot man! but is there a way you can give me the "how-to" tutorial?
Can I use the latest GS mcu even if I dont have Android 8 on my GS device?
catu said:
Can I use the latest GS mcu even if I dont have Android 8 on my GS device?
Click to expand...
Click to collapse
Yes, MCUs are not processor or OS specific.
Thanks a lot for this, can anybody guide me how to figure out which one of these I need to install. My device mcu version says: 023042bGS-CIC-HW7-180516[B1280_170325].
I Guess it should be GS
cagdas said:
Thanks a lot for this, can anybody guide me how to figure out which one of these I need to install. My device mcu version says: 023042bGS-CIC-HW7-180516[B1280_170325].
I Guess it should be GS
Click to expand...
Click to collapse
If your MCU does not start wth "MTCD" or "MTCE" its not MTCD/E unit, try the Android Headunit general forum.
Thanks I found the right one finally but the hu says please wait and news starts the process.
cagdas said:
Thanks I found the right one finally but the hu says please wait and news starts the process.
Click to expand...
Click to collapse
Where did you find it ?
Hi I have a car radio Px3 (1024x600) android 7.1.2 with mcu mtcd chs Vs 2.56 july 2017 can I update it without risk with the file mtce chs v2, 75 June 2018?
g.mariano85 said:
Hi I have a car radio Px3 (1024x600) android 7.1.2 with mcu mtcd chs Vs 2.56 july 2017 can I update it without risk with the file mtce chs v2, 75 June 2018?
Click to expand...
Click to collapse
Can you share a link to the file ?
And post a screen shot of your MCU ? (it should b "v2.56" not "Vs 2.56").
typos1 said:
Can you share a link to the file ?
And post a screen shot of your MCU ? (it should b "v2.56" not "Vs 2.56").
Click to expand...
Click to collapse
HI this is the link and screen. Thanks
https://yadi.sk/d/umCvHqCDzHccr/All dmcu for PX3, PX5, Intel Sofia3g/CHS
g.mariano85 said:
HI this is the link and screen. Thanks
https://yadi.sk/d/umCvHqCDzHccr/All dmcu for PX3, PX5, Intel Sofia3g/CHS
Click to expand...
Click to collapse
As far as I know you can, but Sofia mdels have the wifi on the SoM, so the MCU may have some differences, do you have a copy of an older CHS MCU ?
typos1 said:
As far as I know you can, but Sofia mdels have the wifi on the SoM, so the MCU may have some differences, do you have a copy of an older CHS MCU ?
Click to expand...
Click to collapse
No, I'm sorry, I don't have any copies. I bought it from a friend. What do you think I risk? I would like to try to update it because I have problems with Bluetooth or do you think it can solve maybe changing roms? But even I wouldn't know where to start, which rom I could put and how. Thank you
g.mariano85 said:
No, I'm sorry, I don't have any copies. I bought it from a friend. What do you think I risk? I would like to try to update it because I have problems with Bluetooth or do you think it can solve maybe changing roms? But even I wouldn't know where to start, which rom I could put and how. Thank you
Click to expand...
Click to collapse
Usually all MTCD/E units use the same MCU and I was always under the impression Sofia units did too, but as I said they have wifi on the SoM which may make a difference as on other MTCD/E units the wifi is on the motherboard, so I m not 100% certain, also the link you posted has "Sofia MCU".
So I would read this thread starting at the beginning to find out for sure.
g.mariano85 said:
No, I'm sorry, I don't have any copies. I bought it from a friend. What do you think I risk? I would like to try to update it because I have problems with Bluetooth or do you think it can solve maybe changing roms? But even I wouldn't know where to start, which rom I could put and how. Thank you
Click to expand...
Click to collapse
Hi, did you succeed with any update? ROM or MCU?
I have a similar MCU CHS 2.51, BT frequently needs a complete 10s-Powerbutton reset to work....
Tx!
Hi, I also have your same problem with the bt. No I have not tried to update I am afraid of breaking everything not being so heady
Green Daddy said:
Hi, did you succeed with any update? ROM or MCU?
I have a similar MCU CHS 2.51, BT frequently needs a complete 10s-Powerbutton reset to work....
Tx!
Click to expand...
Click to collapse
You could try changing the MCU to a different one - see @marchnz's "Verified Cross Compatible MCUs" thread.

please help me, I installed the wrong MCU

Hello ,
I have updated the MCU incorrectly because of cross compatibility.
This is the original version of my device in the pictures.
now my device changed to screen 1024x600
please help me, how do I get to the 800x480 version
Your pics show MTCD, try MTCD section, see cross-compatibility thread which details how to resolve for 800x600.

Xtrons PR98MTVL Update Android Firmware

Hi
I have an Xtrons PR98MTVL head unit which i would like to update the Android firmware.
Firstly I'm a total newbie to this but am a geek and have a good level of computer skills (if that actually helps at all these days!!??)
My questions are:
1. How do I find out what I currently have.
2. How do I found out what I can flash my head unit with.
3. How do I back up my existing firmware (god forbid I brick the damn thing!)
4. How do I flash the head unit with the firmware and enjoy all of the newer apps I currently cant access.
5. How do I make changes to the front screen layout or add a theme to the head unit?
Thanks in advance for your help.
Obvs if these questions have been asked and answered elsewhere (i did have a look but didnt find enough specific iunfo) then please just paste a link to that thread.
Lee
Open the settings of your device and open the software info.
There will be information like: Android version; MCU version and CPU info.
Screenshot that and post it here.

Categories

Resources