Good afternoon!
After replacing the display, the fingerprint scanner disappeared from the settings. During the repair, the scanner was moved to a new display.
When trying to flash the scanner through the site https://pixelrepair.withgoogle.com/steps
Gives an error - TP1A.221105.002 is newer than this repair tool has
Please, tell me how can i fix this ?
Vasiliy Morrow said:
Good afternoon!
After replacing the display, the fingerprint scanner disappeared from the settings. During the repair, the scanner was moved to a new display.
When trying to flash the scanner through the site https://pixelrepair.withgoogle.com/steps
Gives an error - TP1A.221105.002 is newer than this repair tool has
Please, tell me how can i fix this ?
Click to expand...
Click to collapse
flash an older version of the stock image like the october update and then try
Vasiliy Morrow said:
Good afternoon!
After replacing the display, the fingerprint scanner disappeared from the settings. During the repair, the scanner was moved to a new display.
When trying to flash the scanner through the site https://pixelrepair.withgoogle.com/steps
Gives an error - TP1A.221105.002 is newer than this repair tool has
Please, tell me how can i fix this ?
Click to expand...
Click to collapse
If you continue to experience issues with the fingerprint reader, you should check for an available OS update on your Pixel 6 and update to the latest version of Android. Maybe you didn't update earlier or a new update could bring more improvements to the fingerprint sensor
Related
hello i'm mi 5s 4gb/128gb user
yesterday, i was using cyanogenmod 13 but i want to use miui again
so i restored nendroid backup from twrp recovery
that was start of diaster..
after this. fingerprint scanner mostly doesn't work
sometimes fingerprint scanner work correctly after reboot, it doesn't work.. and sometimes... it works...
i did many many method (global rom, china rom via edl mode, fastboot mode) but everything has same result,
so i looked at my logcat
it says
QFP : QfpThreadMatch::execute: match result -3: QFP_INSUFFICIENT_COVERAGE
with my finger or not logcat said same result
why my fingerprint scanner doesn't work?
is it hardware issue?
sorry for poor english
yesterday, i was using cyanogenmod 13.......is it hardware issue? .......
jlmcr87 said:
yesterday, i was using cyanogenmod 13.......is it hardware issue? .......
Click to expand...
Click to collapse
???
Maybe placebo effect but people are saying Global rom had improved fingertip detection rate.
If i were you, i would flash as stock as possible, recovery, bootloader, lock status, everything, just to determine software versus hardware failure.
Hope for the best, as this kind of life cycle premature failure freak me out, first stucked autofocus sensor now this!!!
jpg3927 said:
???
Click to expand...
Click to collapse
You change the software and then ask if it´s hardware?
jlmcr87 said:
You change the software and then ask if it´s hardware?
Click to expand...
Click to collapse
yes it's strange
jpg3927 said:
yes it's strange
Click to expand...
Click to collapse
I had a problem which seemed to be hardware related after flashing the Chinese developer ROM and then later restoring a Miui EU ROM from a backup. My problem was with audio - there was no sound coming from the speaker or headphone output. I did diagnostic tests which failed - indicating a hardware problem.
It was only after re flashing the EU Miui ROM that the problem was resolved.
EpicSauce said:
I had a problem which seemed to be hardware related after flashing the Chinese developer ROM and then later restoring a Miui EU ROM from a backup. My problem was with audio - there was no sound coming from the speaker or headphone output. I did diagnostic tests which failed - indicating a hardware problem.
It was only after re flashing the EU Miui ROM that the problem was resolved.
Click to expand...
Click to collapse
i solved it
i think this was problem of driver
so i needed rollback of driver
first. i flashed 6.10.13 eu rom over 6.12.29
it occurs bootloop
second. i flashed 6.12.29 over 6.10.13 again. and fingerprint works like charm again!
Exists the cyanogenmod for Mi5s?
Still very buggy. We have to wait for xiaomi to release the source code to get nice CM .
The fingerprint happened to me too, it just stopped working.
Flash the stable global using fastboot, it will erase everything, and will be great again.
Don't restore with Titanium backup, I had all kind of weird problems everytime I tried.
One of the worst fp sensors ever. I tried all the tricks mentioned in several places, detection rate stays very low.
Sent from my MI 5s using Tapatalk
LucaOwner said:
Exists the cyanogenmod for Mi5s?
Click to expand...
Click to collapse
Linage os
Download link:
https://mega.nz/#!0wY0QTxA!h1SkLNBby8xjj4CVCZpeQiSngb5SoB3IjC6Po-gfEeo
(SPFlashTool version)
Pro:
-NFC working
-Bluetooth working
-WiFi working
-WiFi Tethering working
-camera with super fast focus
-GPS still unbelievable good thanks of GNSS
-Task Cleaner
-fixed Navbar (you can even swipe from the bottom to activate them)
-shortcut button works
-fixed offscreen gestures
-fixed sheduled power on&off
Bugs:
Temporarily, the fingerprint sensor and laser focus can not work well. They will be fixed in next few updates.
Original thread:
http://bbs.elephone.hk/thread-12793-1-1.html
Downloading now
But this is not a new Rom, that is from 21.12.16.
Yes, is new respect the previous november version.....!
How can I root this rom ?
Enjoy !
ajael44 said:
How can I root this rom ?
Enjoy !
Click to expand...
Click to collapse
All the info is on the November ROM thread here
Sent from my P9000 using XDA-Developers Legacy app
The latest SuperSu beta also works, if I'm not mistaken.
Is this an improvement on CM13 or still very early in the development stages? I'm looking for stability.
andythedev said:
Is this an improvement on CM13 or still very early in the development stages? I'm looking for stability.
Click to expand...
Click to collapse
i dont think its stable, when i used it, few days later all my apps started to crash and crash for no reason... and fingerprint isnt working either, and led is with bugs, so im still using cm13, and when a better build comes out ill flash it
The "P9000" is one big bug
Mr.Ratio said:
The "P9000" is one big bug
Click to expand...
Click to collapse
can not complain about the phone... if i think about my old galaxy s3, there were severe issues from the beginning and it once cost more than twice the money i paid for the elephone!
P9000 is a very good device !
Any ETA for an update ?
Enjoy !
Having this installed for a few weeks now, very usable and stable.
Some remarks even so Blue tooth normal operation OK (Parrot headphone ans so on), BLE seems to get closed when phone is of, connecting with my watch, but stops working after a couple off minutes..
Some app's won't go(Sygic is working on solution), can bee due the 7.0 and is not Elephone related.
FP,LED as stated not working (missing it)
Wireless loading ok, fast loading have one at home and looks to work, but not top speed loading.
So to put in perspective, still ahead of a lot other phones, htc 10, galaxy s7, LG, Oneplus, sony experia Z5, so not to bad.
on my telephone GPS doesn't work to beta2 version, only to beta1
Had some problems with Blue tooth BLE and my smart watch, but in battery settings turned off stand-by energy saving, looks that it stays connected with screen off.
I have access to a laptop now, which bin file do I flash with Flash tools? None of them are accepted when I select them.
I tried using Flashify and it put my phone in a bootloop.
I only have the following options
AdcInitAddr.bin
GpioAddr.bin
lk.bin
logo.bin
preloader_c239v55_dx.bin
trustzone.bin
mrbubba999 said:
I have access to a laptop now, which bin file do I flash with Flash tools? None of them are accepted when I select them.
I tried using Flashify and it put my phone in a bootloop.
I only have the following options
AdcInitAddr.bin
GpioAddr.bin
lk.bin
logo.bin
preloader_c239v55_dx.bin
trustzone.bin
Click to expand...
Click to collapse
You have to set the scatter file first, also please try not to post it twice, we can see it in just one post... If more that's just spam....
Ruben Craveiro said:
You have to set the scatter file first, also please try not to post it twice, we can see it in just one post... If more that's just spam....
Click to expand...
Click to collapse
I posted it in the wrong thread, hence the 2nd post.
I've set the scatter file, but I always get this error "brom error s invalid da file 0x138a"
It seems they got the fingerprint sensor sorted in the next BETA
https://www.youtube.com/watch?v=u40XJkeOHqs
mrbubba999 said:
I posted it in the wrong thread, hence the 2nd post.
I've set the scatter file, but I always get this error "brom error s invalid da file 0x138a"
Click to expand...
Click to collapse
Do you get that error when trying to flash or when inserting the scatter file? see this: http://en.miui.com/thread-78047-1-1.html it might help with what you are having
farsiray said:
It seems they got the fingerprint sensor sorted in the next BETA
https://www.youtube.com/watch?v=u40XJkeOHqs
Click to expand...
Click to collapse
there are some cuts in the video... really suspicious....
Help ! My fingerprint scanner suddenly not working, it shows“ fingerprint hardware not available” , wipe cache and reflash rom already, but still doesn't work. Anyone has the same issue or face this issue before ? Pls help , I'm in oxygen os beta 11 with elemental x kernel
Ocean Fong said:
Help ! My fingerprint scanner suddenly not working, it shows“ fingerprint hardware not available” , wipe cache and reflash rom already, but still doesn't work. Anyone has the same issue or face this issue before ? Pls help , I'm in oxygen os beta 11 with elemental x kernel
Click to expand...
Click to collapse
Flash a full stock ROM zip, with the included firmware. If that doesn't work then send it off to OnePlus.
Ocean Fong said:
Help ! My fingerprint scanner suddenly not working, it shows“ fingerprint hardware not available” , wipe cache and reflash rom already, but still doesn't work. Anyone has the same issue or face this issue before ? Pls help , I'm in oxygen os beta 11 with elemental x kernel
Click to expand...
Click to collapse
Go to Settings and register a new fingerprint ?
Reflash full stock if still doesn't work It's a hardware problem and needs RMA'd
liam_davenport said:
Reflash full stock if still doesn't work It's a hardware problem and needs RMA'd
Click to expand...
Click to collapse
I go to the dialer app and type *#808# , and to the fingerprint test , passed , but still not working . I can press the sensor to go to home but fingerprint sensor not working ? Maybe a software issue ?
Ocean Fong said:
I go to the dialer app and type *#808# , and to the fingerprint test , passed , but still not working . I can press the sensor to go to home but fingerprint sensor not working ? Maybe a software issue ?
Click to expand...
Click to collapse
Have you flashed full stock and the issue is still there?
You need to flash 3.2.8 official version. It wilk bring back your fingerprint sensor.
Have you registered a new fingerprint in settings?
liam_davenport said:
Have you flashed full stock and the issue is still there?
Click to expand...
Click to collapse
Yes tried already
Perseus09 said:
You need to flash 3.2.8 official version. It wilk bring back your fingerprint sensor.
Click to expand...
Click to collapse
This will wipe all my data right ? Any other ways ?
rob rich said:
Have you registered a new fingerprint in settings?
Click to expand...
Click to collapse
Nope , can't even do that
Same Issue with me
I am also facing the same issue. Done everything I guess what I have seen over the internet but, still it saying fingerprint hardware is not available. What to do bro please help me if your issue has been solved
Guys do a full clean install. Somehow something is messed up. Try the unbrick guide it will reset your phone fully from then you should upgrade to the latest version of OOS and then if everything is working consider a custom rom.
So i got the fingerprint problem and as far as I can tell it must be a software problem, because the scanner works fine in all the non stock Roms such as linageos.
- when i try to use the scanner it says "fingerprint hardware not available"
I want to go back to the stock Rom because of battery life.
Anyone that has Found a solution yet?
Hi.
What room did you install?
compilation?
neznoez1 said:
What room did you install?
compilation?
Click to expand...
Click to collapse
i'm not quite sure what you mean by "compilation" but i have tried loads of stock roms both 6.0.1 and 7.1.1.
The AOSP roms are the ones with a working fingerprint scanner, both Mokee and Linage works flawless in that aspect, but the battery life on those aren't nearly as good.
I think once you are rooted/unlock boot-loader, the fingerprint sensor will be out of wack. I think what the previous poster meant was if you saved DRM files. so you didnt lose any sony stuff..
If the bootloader is unlocked, this is another problem causing from WIDEVINE, a DRM feature. I'm not sure renaming widevine files to .bak will help removing this problem, since I don't use the fingerprint. But be my guest.
Good evening together,
I have opened a new topic so that we can do everything together regarding a fix for the fingerprinter.
This is known to be broken when we open the bootloader.
I really hope that together we can find out how we can fix this.
I once looked at all files between de Realme X and the X2.
Unfortunately, I have almost no discernible differences.
Thus, the fix of Realme for the X might also be in the bootloader itself.
Where Widevine is still set from L1 to L3.
Maybe you have an idea?
Up for this topic.
Try to fix fingerprint. Its available only for a17 ROM.
Flash in twrp or unpack and replace files by hands.
also may be need wipe dalvik-cashe.
Fingerprint FIX
djsven said:
Good evening together,
I have opened a new topic so that we can do everything together regarding a fix for the fingerprinter.
This is known to be broken when we open the bootloader.
I really hope that together we can find out how we can fix this.
I once looked at all files between de Realme X and the X2.
Unfortunately, I have almost no discernible differences.
Thus, the fix of Realme for the X might also be in the bootloader itself.
Where Widevine is still set from L1 to L3.
Maybe you have an idea?
Click to expand...
Click to collapse
after update to version V.13 Fp working with boot-loader unlocked ...
amit000in said:
after update to version V.13 Fp working with boot-loader unlocked ...
Click to expand...
Click to collapse
without fix? and what about security certifications instead?