Download link:
https://mega.nz/#!0wY0QTxA!h1SkLNBby8xjj4CVCZpeQiSngb5SoB3IjC6Po-gfEeo
(SPFlashTool version)
Pro:
-NFC working
-Bluetooth working
-WiFi working
-WiFi Tethering working
-camera with super fast focus
-GPS still unbelievable good thanks of GNSS
-Task Cleaner
-fixed Navbar (you can even swipe from the bottom to activate them)
-shortcut button works
-fixed offscreen gestures
-fixed sheduled power on&off
Bugs:
Temporarily, the fingerprint sensor and laser focus can not work well. They will be fixed in next few updates.
Original thread:
http://bbs.elephone.hk/thread-12793-1-1.html
Downloading now
But this is not a new Rom, that is from 21.12.16.
Yes, is new respect the previous november version.....!
How can I root this rom ?
Enjoy !
ajael44 said:
How can I root this rom ?
Enjoy !
Click to expand...
Click to collapse
All the info is on the November ROM thread here
Sent from my P9000 using XDA-Developers Legacy app
The latest SuperSu beta also works, if I'm not mistaken.
Is this an improvement on CM13 or still very early in the development stages? I'm looking for stability.
andythedev said:
Is this an improvement on CM13 or still very early in the development stages? I'm looking for stability.
Click to expand...
Click to collapse
i dont think its stable, when i used it, few days later all my apps started to crash and crash for no reason... and fingerprint isnt working either, and led is with bugs, so im still using cm13, and when a better build comes out ill flash it
The "P9000" is one big bug
Mr.Ratio said:
The "P9000" is one big bug
Click to expand...
Click to collapse
can not complain about the phone... if i think about my old galaxy s3, there were severe issues from the beginning and it once cost more than twice the money i paid for the elephone!
P9000 is a very good device !
Any ETA for an update ?
Enjoy !
Having this installed for a few weeks now, very usable and stable.
Some remarks even so Blue tooth normal operation OK (Parrot headphone ans so on), BLE seems to get closed when phone is of, connecting with my watch, but stops working after a couple off minutes..
Some app's won't go(Sygic is working on solution), can bee due the 7.0 and is not Elephone related.
FP,LED as stated not working (missing it)
Wireless loading ok, fast loading have one at home and looks to work, but not top speed loading.
So to put in perspective, still ahead of a lot other phones, htc 10, galaxy s7, LG, Oneplus, sony experia Z5, so not to bad.
on my telephone GPS doesn't work to beta2 version, only to beta1
Had some problems with Blue tooth BLE and my smart watch, but in battery settings turned off stand-by energy saving, looks that it stays connected with screen off.
I have access to a laptop now, which bin file do I flash with Flash tools? None of them are accepted when I select them.
I tried using Flashify and it put my phone in a bootloop.
I only have the following options
AdcInitAddr.bin
GpioAddr.bin
lk.bin
logo.bin
preloader_c239v55_dx.bin
trustzone.bin
mrbubba999 said:
I have access to a laptop now, which bin file do I flash with Flash tools? None of them are accepted when I select them.
I tried using Flashify and it put my phone in a bootloop.
I only have the following options
AdcInitAddr.bin
GpioAddr.bin
lk.bin
logo.bin
preloader_c239v55_dx.bin
trustzone.bin
Click to expand...
Click to collapse
You have to set the scatter file first, also please try not to post it twice, we can see it in just one post... If more that's just spam....
Ruben Craveiro said:
You have to set the scatter file first, also please try not to post it twice, we can see it in just one post... If more that's just spam....
Click to expand...
Click to collapse
I posted it in the wrong thread, hence the 2nd post.
I've set the scatter file, but I always get this error "brom error s invalid da file 0x138a"
It seems they got the fingerprint sensor sorted in the next BETA
https://www.youtube.com/watch?v=u40XJkeOHqs
mrbubba999 said:
I posted it in the wrong thread, hence the 2nd post.
I've set the scatter file, but I always get this error "brom error s invalid da file 0x138a"
Click to expand...
Click to collapse
Do you get that error when trying to flash or when inserting the scatter file? see this: http://en.miui.com/thread-78047-1-1.html it might help with what you are having
farsiray said:
It seems they got the fingerprint sensor sorted in the next BETA
https://www.youtube.com/watch?v=u40XJkeOHqs
Click to expand...
Click to collapse
there are some cuts in the video... really suspicious....
Related
Unofficial CM 10 for HTC Desire 300 (g3u)
device_htc_g3u v0.8b (24/12/15)
Traded stagefright bug for a new kernel
(no more stagefright and a freshly compiled kernel)
device_htc_g3u v0.77b3 (04/10/14)
Battery comsumption (hot)fix
(rls should no longer drain your device)
device_htc_g3u v0.77b2 (01/10/14)
Wifi is working
(wifi0 is forced into compliance)
device_htc_g3u v0.77b (25/9/14)
jellybean
(nom nom nom)
Full Disclosure
This is my first android project, so go easy on me.
Project Status
It's usable as a phone
So any willing beta testers are welcome to join the 'fun' and report further bugs.
Project !Status
mobiledata works but will drain your battery
(if you need to use it, reboot after switching it off)
libaudio is not fully functional
(stock has no mic unless in a call and custom has no speaker)
USB only works in mtp mode
(mass_storage mode appears to be incompatible with rmt_storage)
FM Radio not available
(required apps are currently not compiling)
Camera (front) appears unstable
(didn't bother to check what might be the cause)
TODO
[high priority]
fix libaudio (recording in stock or speaker in custom)
[medium priority]
fix libril -> mobile data drains the battery
[low priority]
enable apps2sd -> 2GB internal should suffice for the time being
check if cm supports proximity & light sensors -> they do work fine
fix mass_storage -> mtp is working
fix video recording -> it's a phone not a camcorder
fix video playback -> at least they are running
fix camera -> it's a phone dammit
find a better fix for wifi -> it works for now
fix graphical glitches
Disclaimer
Use at you own risk. This is a public beta and not meant for daily use. Please keep that in mind.
I can not be held accountable for any damage you might cause to your device if you decide to flash this file.
Requirements
HTC Desire 300 with unlocked Bootloader and custom recovery
(S-ON or S-OFF does not matter)
Download
Click me if you want the initial wifi free version (9d0a8fcca957d09dbaf306a1986d14dd)
Click me if you want to drain your battery (688c2779b4864ed9b568260477708049)
Click me if you like the stock kernel (1ba8a225bc7772f34f1e56bff51bfe27)
Click me if you dare (78bbcf5bf0eb26520efff6d49adac106)
Warning!!! If you are not a certified beta tester the zip file might explode upon extraction!!! You have been warned!
Installation
Enter recovery and begin by backing up your current system.
Next choose Wipe Data / Factory Reset from the main menu and Wipe Dalvic from the advanced submenu.
Last but not least use the mount submenu to format system.
Now use sideload or zip install to start beta testing this tasty jellybean.
Special Thanks
go out to anyone who has ever contributed something to a msm8225, ath6kl or htc related android project
device_htc_g3u
kernel_htc_g3u
Branch: Android 4.1.2
Version: 3.4.0-g12f638f
Config: g3u_defconfig
Toolchain: arm-eabi-4.6
Click to expand...
Click to collapse
compiled by 4m8
(My mind is a swirling miasma of scintillating thoughts and turgid ideas.)
What are the requirements ? I guess I should use the only recovery available for the device ? and also, since we don't have s-off working for this device I think we have to flash the boot.img right ?
I'd recommend using the recovery from this build for the job. It won't crash unlike the philz version.
And no, you don't need to flash boot seperately. The only requirement is an unlocked bootloader.
S-ON only protects hboot and radio from flashing so you can safely install this release from the recovery.
Don't forget to backup your current system.
I'm downloading the files now, will test and report ASAP
Can i promote this in 2 german Forums? ist German translation available?
when do you think you will fix wifi?
HUGE THANKS IN FORWARD FOR COMPILING CM!
After the experiment:
the Rom stable and fast, but Wi-Fi does not work and do not contain FM radio
Front camera not working
I wish you success in your work and I hope you update the version of Android to be higher than 4.1.2
Thank you very much ..
4m8 said:
I'd recommend using the recovery from this build for the job. It won't crash unlike the philz version.
And no, you don't need to flash boot seperately. The only requirement is an unlocked bootloader.
S-ON only protects hboot and radio from flashing so you can safely install this release from the recovery.
Don't forget to backup your current system.
Click to expand...
Click to collapse
In which way will PhilZ CWM crash? will it still install the rom or not? will it brick my phone?
bassam_tayyan said:
After the experiment:
the Rom stable and fast, but Wi-Fi does not work and do not contain FM radio
Front camera not working
I wish you success in your work and I hope you update the version of Android to be higher than 4.1.2
Thank you very much ..
Click to expand...
Click to collapse
Ah yes FM. It's included in the custom libaudio that can't connect to the speaker.
Which I currently simply replace with the stock lib to make it work as a phone so it can be used to test battery consuption etc.
Sadly the cm apps used for fm won't compile for me. So even if I get libaudio working FM would still be untestable without non cm apps.
I'll add it to the todo once the libaudio trouble is resolved.
The wifi is an annoying issue. I manged to get it to load the drivers so the p2p0 socket gets created.
But it tries to restart it as STA which if my google fu is correct it shouldn't do, since this firmware does not need restarting.
The front camera is a curious bug. It works absoluetly fine for me until I point it towards my face.
So it's either a problem with the proximity sensor or the nasty htc camera tries some facial recognition crap and dies.
If I ever decide to logcat the camera I can tell you more.
Now for a higher version, don't get your hopes up. At least not from my side.
First I'll try my best to fix this up. Then I'll wait for htc to release the kernel so I can get a closer look at the configuration
for this device and maybe adjust it to make this rom even better. Then again the last kernel I compiled was 10 years ago for a gentoo install.
LukeHorizon said:
In which way will PhilZ CWM crash? will it still install the rom or not? will it brick my phone?
Click to expand...
Click to collapse
If you are quick it will install fine. So if you prefer to live dangereously, don't let me stop you
I don't know if it is only an error that is presented on my device. Or maybe it was updated since then.
But for me philz recovery by SPSPawn does boot into a dead state. If you reboot it will crash until a panic reset is triggered.
Actually it is allready crashed while you are in recovery. Therefore you are on a timer until the device resets or you decide to
take out the battery.
I had the same problem on my build and it was caused by cwm always ignoring the ueventd.rc I had prepared because I didn't know
I had to copy it to root and not to recovery.
I've never bothered to figure out which missing element of this script was responsible because I had to substitute it in any case.
But honestly, tell me. Why do you prefer philz? I'm allready (so far unsuccessfully) trying to port twrp. If you have a few good arguments
I might be willing to try compiling a fixed version of philz aswell.
Well i didnt want to use a pc right now ... A TWRP port would be amazing
Is mobile data working?
Can you make your recovery flashable via cwm?
LukeHorizon said:
Well i didnt want to use a pc right now ... A TWRP port would be amazing
Is mobile data working?
Can you make your recovery flashable via cwm?
Click to expand...
Click to collapse
It always tried to download the google language pack for my region until I aborted it. So, yes mobile data should be available.
You mean put the recovery into an update zip thingy, right. Well I could, but you will have used a pc before I'll find the time to upload it.
I'll keep it in consideration for the next update.
Well, atleast internet
When do you think you'll fix wifi?
Regarding to wifi, it will be fixed once it's fixed. Or if you prefer the usual response: When it's done.
This will happen either after or before libaudio is fixed. And that's about as specific as I can get.
Well, it was worth a try still thanks for your effort!
Okay, here goes.
First I tried installing the ROM with the PhilZ recovery because I already had it on my phone, didn't work. Gave me some kind of error (not sure about the error code anymore). Flashed your recovery, worked flawlessly. Now for the ROM.
It's pretty stable, I've had only one strange crash and that was in the first 2 minutes of using it so I don't even know if it counts. The additional CM settings panel works fine, quick toggles are ok, I haven't tried overclocking yet - I'll leave that to someone else. But I have found some bugs:
-proximity sensor not working (screen doesn't go black when you place it up to your ear)
-ambient light sensor not working (auto brightness doesn't work)
-video recording doesn't work
-the camera app glitched up the first time I tried to zoom (was fine afterwards)
-sometimes when going from portrait to landscape I got 1 second of weird graphical glitches
-signal indicator seems to be stuck at 2 out of 4 bars and doesn't move
Overall very nice, keep up the good work!
luxb said:
Okay, here goes.
First I tried installing the ROM with the PhilZ recovery because I already had it on my phone, didn't work. Gave me some kind of error (not sure about the error code anymore). Flashed your recovery, worked flawlessly. Now for the ROM.
It's pretty stable, I've had only one strange crash and that was in the first 2 minutes of using it so I don't even know if it counts. The additional CM settings panel works fine, quick toggles are ok, I haven't tried overclocking yet - I'll leave that to someone else. But I have found some bugs:
-proximity sensor not working (screen doesn't go black when you place it up to your ear)
-ambient light sensor not working (auto brightness doesn't work)
-video recording doesn't work
-the camera app glitched up the first time I tried to zoom (was fine afterwards)
-sometimes when going from portrait to landscape I got 1 second of weird graphical glitches
Overall very nice, keep up the good work!
Click to expand...
Click to collapse
I guess wifi isnt working for you right?
It's not working, but I didn't put it on the list since he already knows it's bugged.
Well, i'll try today
Lets see what happens
Anyway, forgot to unpack the file ... GApps come with it?
SOOO, booting went fine, working like a charm... quicksettings page not available, quicksettings bar is working properly
Mobile Data works flawless, and i guess the rest is just fine
German language worked instantly
it feels way faster then Sense, a HUGE Thanks for you, makes me actually like that phone again ...
I'd like to promote it in German forums if i WiFi is fixed in near future
regards!
LukeHorizon said:
[...]
GApps come with it?
[...]
German language worked instantly
it feels way faster then Sense, a HUGE Thanks for you, makes me actually like that phone again ...
[...]
Click to expand...
Click to collapse
No, you have to get gapps on your own. Since there are multiple options you can choose for yourself. But if you did not format system,
as I've mentioned in the install instructions, chances are high that google apps did get picked up by the install script.
I am not sure if it can take them from the stock rom but it can and will take them from a cm rom and keep them on reinstall.
(I am really not very pleased by this behavior!)
I also should have mentioned that the primary language is decided by the simcard. (Which is annoying since I prefer english in any case)
Randnotiz:
Es freut mich das ich Dir den Spass am Gerät zurückgeben konnte.
Natürlich darfst Du es in deutschen Foren weiterverbreiten sobald die gröbsten Fehler behoben sind.
Einzige Vorraussetzung ist, daß Du es nicht als Deine Arbeit ausgibst.
luxb said:
[...]
-proximity sensor not working (screen doesn't go black when you place it up to your ear)
-ambient light sensor not working (auto brightness doesn't work)
-video recording doesn't work
-the camera app glitched up the first time I tried to zoom (was fine afterwards)
-sometimes when going from portrait to landscape I got 1 second of weird graphical glitches
-signal indicator seems to be stuck at 2 out of 4 bars and doesn't move
[...]
Click to expand...
Click to collapse
Wow. That's much more broken than I expected it to be. Kudos.
Regarding the sensors. I currently am using the stock lib. And logcat let's me assume that they are working as they should.
(i.e they don't crash or drift into madness afaik)
Maybe the stock lib doesn't play well with cm, or you are expecting features from cm that are not implemented.
I will definetly try to compile a working sensor lib in the future, so I guess we'll see....
Camera is also just the stock lib for now. So it's no surprise that somethings might be acting up.
I need a lot of research into that subject before I can specify the requirements for the camera in my boardconfig.
The graphical glitches are rather minor and can be ignored for now. I am aware they exist.
But for now I'd rather focus on the more prominent broken features.
Like wireless for those of us that can't or won't use mobile data. (I belong to the 2nd group)
I noticed the signal indicator aswell. but that should be a problem of the radio compatibility.
We can't flash radio and I'm using the stock libril as the radio interface which should give maximum compatibility in theory.
Of course it doesn't irl... typical -_- (I hate you, Murphy!)
Sidenote:
Why did you remove your avatar? I really wanted to make some "stop trying to kill spoderman" remark...
@all:
Does anyone have any clue how to use the mock locations for gps? They are enabled, but so far I couldn't find any way to set them to a specific location.
XenonHD ROM for Xiaomi Mi Mix 2
A Team Horizon ROM
Based on AOSP r36 7.1.2
This ROM has all the features XenonHD has to offer.
All hardware functions including:
NFC
Bluetooth Audio
Fingerprint Scanner
Doze & Wake-up Gestures (dtw works after the first reboot)
And...many more things.
Magisk is no longer built in, so you'll need to flash it when first installing, and after every dirty flash.
VoLTE doesn't work (at least on T-Mobile). I believe most of the pieces are in place, but there may be something in the firmware that's preventing it? If I could figure out how to tap into the stock cust files, I might be able to figure out how to get it working.
Proximity Sensor is working:
Notification Light:
I have slowed down the notification light so it isn't all amped up. To make it completely usable, go to:
Fixed default notification blinks for built-in apps so they are slowed down without needing to go to settings.
For use-installed apps, add them to custom notification list in settings > notifications > gear icon > notification light > + in upper right corner > select app. Apps added to that list will have slow notification blinks.
I simply cannot find a way to make user-installed app notifications behave the same as built-in apps. Grrr!!
I have also made the light sensor wait longer before dimming the screen. This helps with left-handed activities blocking the light sensor and almost immediately dimming the screen.
Reduced time to go back from dim to bright. Screen will dim after 5 seconds, returns to bright after 2 seconds.
I've remove configpanel & pocketmode...they did little to nothing, and may have caused more battery drain than I care for.
Required prior to installing:
Unlock Bootloader
Install custom recovery: https://www.androidfilehost.com/?fid=962021903579490303
HUGE thanks to IceMan for bringing this to Mix 2!
A quirk with this TWRP: This one looks for backups in TWRP/BACKUPS/MIX_2 folder. Normally, the MIX_2 folder is named after serial number of your device.
So, you existing backups won't be found until you rename the folder in BACKUPS to MIX_2.
Installation Instructions:
Dirty flash is now available with the above TWRP and 10-26-2017 rom.
Download the most recent build: https://www.androidfilehost.com/?fid=673791459329071426
Download Gapps (I use Open Gapps Mini) --> http://opengapps.org/
All versions from 10-24-2017 are now encryptable.
From TWRP Recovery:
IF COMING FROM MIUI-BASED ROM: FULL WIPE AND FORMAT DATA!!
If you encounter ERROR 7, during XenonHD install, install Global MIUI ROM, then do full wipe and data format again, then install XenonHD rom.
If coming from AOSP-based ROM:
- Full wipe (Cache, Davlik/ART Cache, System & Data)
- Flash ROM zip
- Flash Gapps zip
Huge thanks to Mokee for bringing this device up and making a great place to start.
Also a very HUGE thanks to @Arasthel for his work on proximity sensor and figuring out the bluetooth reboot stuff and other hints, suggestions and incalculable work.
I'd also like to thank all of you folks here for trying this ROM and providing constructive feedback.
In addition, I appreciate your patience when issues come up that need to be fixed. I am not a developer, and I have a full time job and a wife that takes precedence most of the time
Sources:
Vendor:
https://github.com/hondajohn88/android_vendor_xiaomi_msm8998-common
https://github.com/hondajohn88/android_vendor_xiaomi_chiron/tree/xenonhd
Kernel:
https://github.com/hondajohn88/android_kernel_xiaomi_msm8998/tree/xenonhd
Device:
https://github.com/hondajohn88/android_device_xiaomi_chiron/tree/xenonhd
https://github.com/hondajohn88/android_device_xiaomi_msm8998-common/tree/xenonhd
reserved
reserved 2
Does safety net pass with or without magisk?
subashchandran said:
Does safety net pass with or without magisk?
Click to expand...
Click to collapse
With magisk its working
Gesendet von meinem MI Mix 2 mit Tapatalk
THX for the ROM @hondajohn88 ,very much appreciated. :good:
Is this 1st release identical to the beta?
Just curious,as I tried to dirty flash over the beta & got the same errors as if coming from another ROM (wouldn't flash).
Is a full wipe (less formatting data) necessary if updating ?
I don't mind setting up from new again,even if just updating from the beta build.
However,wondering if incremental updates are going to be an option on future builds.
THX.
Sent from my MI Mix 2 using XDA Labs
Bluetooth seems to be working fine for audio/calls. Need to try video/youtube audio output on car (will do it on the drive back home)
ROM is slick, its been good so far (2 hours since i have set everything up)
KOLIOSIS said:
THX for the ROM @hondajohn88 ,very much appreciated. :good:
Is this 1st release identical to the beta?
Just curious,as I tried to dirty flash over the beta & got the same errors as if coming from another ROM (wouldn't flash).
Is a full wipe (less formatting data) necessary if updating ?
I don't mind setting up from new again,even if just updating from the beta build.
However,wondering if incremental updates are going to be an option on future builds.
THX.
Sent from my MI Mix 2 using XDA Labs
Click to expand...
Click to collapse
Oh yeah...I need to add that to the OP, for some reason, dirty flash won't work. There's a couple weird things with this build, one is I can't make a dirty build or it breaks Wi-Fi, and can't dirty flash. I don't know the reasons, but if I figure it out, I'll be sure to let everyone here know. It's an extreme pain in the ass.
subashchandran said:
Bluetooth seems to be working fine for audio/calls. Need to try video/youtube audio output on car (will do it on the drive back home)
ROM is slick, its been good so far (2 hours since i have set everything up)
Click to expand...
Click to collapse
Glad everything is working for you so far. Bluetooth audio in car should work (it does on mine), but I found the volume on the car set to zero so needed to turn that up. That was a brief "oh crap" moment that I thought it wasn't working lol
subashchandran said:
Does safety net pass with or without magisk?
Click to expand...
Click to collapse
I think it fails without it, but magisk is built in, so if have to remove it to find out for sure.
hondajohn88 said:
Oh yeah...I need to add that to the OP, for some reason, dirty flash won't work. There's a couple weird things with this build, one is I can't make a dirty build or it breaks Wi-Fi, and can't dirty flash. I don't know the reasons, but if I figure it out, I'll be sure to let everyone here know. It's an extreme pain in the ass.
Click to expand...
Click to collapse
IT'S ALL GOOD @hondajohn88 . :good:
This ROM is daily-driver material,every update from here on out is a bonus & very much appreciated. :good:
hondajohn88 said:
Oh yeah...I need to add that to the OP, for some reason, dirty flash won't work. There's a couple weird things with this build, one is I can't make a dirty build or it breaks Wi-Fi, and can't dirty flash. I don't know the reasons, but if I figure it out, I'll be sure to let everyone here know. It's an extreme pain in the ass.
Click to expand...
Click to collapse
It seems that we both have faced this issue. I just got A2DP working yesterday on Resurrection Remix by using sagit as base - without msm-8998 common and all that -, imagine my surprise when I saw you also did .
Anyway, I think the WiFi bug may be related to something going wrong in the build. When you build the ROM, kernel sources are used and you can see that the wlan.ko module is built. The problem is, wlan.ko is also a binary blob found in vendor. I believe that on the 2nd build, if dirty, one of these modules overwrites the other - which worked. Maybe you can test this idea, I will be doing it too on the next days.
Arasthel said:
It seems that we both have faced this issue. I just got A2DP working yesterday on Resurrection Remix by using sagit as base - without msm-8998 common and all that -, imagine my surprise when I saw you also did .
Anyway, I think the WiFi bug may be related to something going wrong in the build. When you build the ROM, kernel sources are used and you can see that the wlan.ko module is built. The problem is, wlan.ko is also a binary blob found in vendor. I believe that on the 2nd build, if dirty, one of these modules overwrites the other - which worked. Maybe you can test this idea, I will be doing it too on the next days.
Click to expand...
Click to collapse
That's cool you got the Bluetooth working on RR, knocking little things out one by one ?
Thanks for the idea on the Wi-Fi, I'll look into that this evening. Maybe there's a file I can delete before dirtybuilding. That would make testing things a lot faster! ??
By the way, does android auto work on your rr?
Everything except proximity sensor works and works as good as stock. I have installed custom font, black swift substratum OMS theme without any hiccups. The rom is buttery smooth and I've been getting a better battery drain trend on this compared to resurrection/mokee. I have naptime doze installed to see if i can ooze out more battery goodness to the levels of epic Rom(miui 9)
Overall this is super encouraging to see a daily driver rom this early for mi mix 2.
There is one edge case which might be a bug, when connected on car Bluetooth and watching something on YouTube.. And then you get a call, i pressed answer on the car knobs/buttons.. I couldn't hear the person talking.. Car was displaying "audio disabled message ”. But talking/call and video/music in isolation works just fine.
Android auto works for me. I'm on RR now. Might come to this if we can get Android auto working. How did you guys fix your Bluetooth audio on RR (we can move this to the RR thread if you prefer) @Arasthel
slyyke said:
Android auto works for me. I'm on RR now. Might come to this if we can get Android auto working. How did you guys fix your Bluetooth audio on RR (we can move this to the RR thread if you prefer) @Arasthel
Click to expand...
Click to collapse
Thanks for the info about android auto on RR. I'll take a look at their repo and see if I messed up a USB setting somehow.
As far as I'm concerned, other ROMs can be discussed here.
Open source should be crowd sourced for maximum problem resolution.
RR probably (?) Did the same as me... Mokee made a commit in qcom/audio that did the trick.
hondajohn88 said:
That's cool you got the Bluetooth working on RR, knocking little things out one by one
Thanks for the idea on the Wi-Fi, I'll look into that this evening. Maybe there's a file I can delete before dirtybuilding. That would make testing things a lot faster! ?
By the way, does android auto work on your rr?
Click to expand...
Click to collapse
Hi... Thank you again for the wlan.ko tip. I deleted all instances of that in my out folder, dirty built and it's all good. Sped up my test time considerably! Woohoo! :good:
Thanks op for adding this to to the mix. Much appreciated. I am not sure if I can leave Resurrection due to all the customization options. Does this room offer as many customization options? Thanks so much!
stu5797 said:
Thanks op for adding this to to the mix. Much appreciated. I am not sure if I can leave Resurrection due to all the customization options. Does this room offer as many customization options? Thanks so much!
Click to expand...
Click to collapse
I haven't used rr for this phone, but I think at this point rr probably has more options. This one has quite a few, and as son as I get most of this ROM straightened out, I'll try adding more options.
I'll add some screen shots of the settings to help people decide.
Thanks ?
Great work by a great Dev,
Thanks for putting in the work, smoothhhh rom~
Hi there,
If you haven't heard it already, we have official support now and Q is coming too.
links:
https://wiki.lineageos.org/devices/s3ve3gjv
https://wiki.lineageos.org/devices/s3ve3gxx
credits:
francescodario
me
LineageOS
Klte dev team (you guys rock)
Sources: www.github.com/LineageOS/android_device_samsung_s3ve3gxx
Deleted
Tested, works really well! Good job! Even the battery usage is great. It's smoother compared to 7.1.
As it's pointed out, Gapps breaks RIL. Everything else works except radio and offline charging. Installed Aurora Store and I'm pretty happy with it.
Things I tested:
☑ RIL
☑ Camera Front/Back
☑ Video Recording
☑ Bluetooth
☑ WiFi
☑ Sound
☑ GPS
☑ Calls
☒ Offline Charging, it loops.
☒ Radio, phone freezes.
@notfood
I can confirm your tests, but can you please test Videorecording with 1080p. For me the Video Quality (only with 1080p!) is low, becouse there are randomly White lines from the left to the right in the Video. (Like in all builds after 08/2018)
Humaxxx said:
@notfood
I can confirm your tests, but can you please test Videorecording with 1080p. For me the Video Quality (only with 1080p!) is low, becouse there are randomly White lines from the left to the right in the Video. (Like in all builds after 08/2018)
Click to expand...
Click to collapse
I see the white lines, they're sporadic but they're there only with 1080p.
HI
My findings so far: All things mentioned above are working for me as well, but with some exceptions:
GPS finds plenty of satelites, but doesn't snap in ( no position..).
Battery- charging freezes once, I had to reboot to go on.
In Whatsapp recorded video-sequences aren't playable ( frozen screen or artefacts..)
I couldn't find any menue to choose the touchscreen - triangles for moving the cursor in a text document.
I'm looking forward the next Version....:fingers-crossed:
Just tested this rom on my GT-I9301I for an hour or so and i have to say that auto-rotation doesn't work sometimes, also i don't know what exactly RIL is but i installed the gapps aroma (customized) and didn't realize any issue related to gapps until now, and also i got a new phone recently so the old phone doesn't have a sim card anymore, and i don't plan to put one on my GT-I9301I, so my old phone is somewhat like a test device now, i have tried some custom roms before but i didn't like them too much, this one doesn't look bad, except i wish you could do something about offline charging.
Error: this package is for device
Thank you for your contribution! I tried to flash it to my GT-I9301I with the help of TWRP 2.8.5.0 (I know its old, is there a better approach?). Before flashing i wiped everything, now when I try to install it from the sdcard it fails with the Error "E3004: This package is for device: s3ve3g, s3ve3gds, s3veg3gjv; this device is ." What am I doing wrong? Why is the installer not recognizing my device?
Koksnuss said:
Thank you for your contribution! I tried to flash it to my GT-I9301I with the help of TWRP 2.8.5.0 (I know its old, is there a better approach?). Before flashing i wiped everything, now when I try to install it from the sdcard it fails with the Error "E3004: This package is for device: s3ve3g, s3ve3gds, s3veg3gjv; this device is ." What am I doing wrong? Why is the installer not recognizing my device?
Click to expand...
Click to collapse
You have to use a newer Version of TWRP:
https://dl.twrp.me/s3ve3g/
I know this is only for the single sim variant, but would this work on a duos without ril at least? I don't really need ril that much right now.
JaadiBooti said:
I know this is only for the single sim variant, but would this work on a duos without ril at least? I don't really need ril that much right now.
Click to expand...
Click to collapse
Deleted
another useless ROM, we arrived at 10, or 15?
mariocaraf said:
another useless ROM, we arrived at 10, or 15?
Click to expand...
Click to collapse
Deleted
He didn't work he remained stuck
Please Help
Waiting for an edititon for Sony sensor! On Sony sensor not works camera and flashlight, but rom is usable as daily driver.
Auto-rotate is working in YT Vanced and other apps only sometimes.
This is very cool ROM, better than Nougat!
ayochan said:
He didn't work he remained stuck
Please Help
Click to expand...
Click to collapse
If it gets stuck, you are probably running an outdated firmware. Get the latest from Sammobile or check the Telegram group. You will need Odin or Heimdall to install it. Be careful which firmware you are burning, it can brick your device if it's the wrong one.
For more than an hour it is stuck in the installation screen
Humaxxx said:
You have to use a newer Version of TWRP
Click to expand...
Click to collapse
thanks, that worked perfect! I also like that encryption works
Just bought my a new Evo 860 ssd so I have enough storage for building multiple devices . So yes more build coming this week for Sony and dual SIM.
My 300gb ssd before didn't quite had enough.
Hi Thargorsson,
First of all. Excellent work on the new ROM!
I have just got a hold of 5x S3 NEO and wished they had a newer version than 4.4.2.
After some searches on Google I found this forum. I'm going to wait until you have an updated version of this ROM.
Please keep us all posted on any progress
Cheers,
Steve
It's that time of the year....
Recovery: download (6th Mar '21)
Gapps: download (16th Feb '21)
Lineage 18.1: download (8th Mar '21)
Please report stuff that doesn't work in this thread.
Update: 8th March
Recently fixed:
Bluetooth
Setting a lock screen
AUX / Line Out
Encryption
Gallery speed
Limitations of the current Lineage version:
VoLTE is disabled (will unfortunately not be able to fix that easily)
Dual SIM is not working (for devices that have Dual SIM)
Speakers do not sound as good as on stock
Camera is not as good as stock
Battery life when the screen is on is better on stock than on Lineage
------------
For developers:
device: https://review.lineageos.org/c/LineageOS/android_device_motorola_clark/+/304226/2
kernel: https://review.lineageos.org/c/LineageOS/android_kernel_motorola_msm8992/+/304218/1
vendor: https://github.com/chrmhoffmann/proprietary_vendor_motorola/tree/lineage-18.1
Note: Credits go to the usual lineage team from whom the device benefits enormously. Also the previous device maintainers have done a great job and we're still benefiting from that. E.g. the camera reverse engineering.
chrmhoffmann said:
It's that time of the year....
Recovery: download (16th Feb '21)
Gapps: download (16th Feb '21)
Lineage 18.1: download (16th Feb '21)
Please report stuff that doesn't work in this thread.
------------
For developers:
device: https://review.lineageos.org/c/LineageOS/android_device_motorola_clark/+/304226/2
kernel: https://review.lineageos.org/c/LineageOS/android_kernel_motorola_msm8992/+/304218/1
vendor: https://github.com/chrmhoffmann/proprietary_vendor_motorola/tree/lineage-18.1
Click to expand...
Click to collapse
Hello Chris, first of all, thanks for continuing on 18.1. I installed the rom and it booted fine. The set-up was buggy and laggy an kept crashing on setting up screen pattern. So I can't set screen pattern/pincode/password. Also I installed some apps from play store like whatsapp,gmail, telegram and they are doing fine. The phone gets hot and battery drains fast. Ambient display is a bit buggy, it's not working everytime. Anyways for the first build it's quite good. Thanks again
Maybe anybody else can also test?
Yes, setting up lock screen is broken. Will fix it in next build.
Chris
!
[QUOTE = "chrmhoffmann, post: 84511557, member: 361777"]
Да, не работает настройка экрана блокировки. Исправлю в следующей сборке.
Крис
[/ ЦИТИРОВАТЬ]
Dear Chris, everything is superb, but the function of broadcasting the screen in the quick settings menu does not work when connected (miracast) the phone is overloaded
I think bluetooth headsets are broken.
Chris
chrmhoffmann said:
I think bluetooth headsets are broken.
Chris
Click to expand...
Click to collapse
I can confirm that, it connects with my Haylou GT1 Pro but no sound.
Fixed. Uploading new build that fixes bluetooth and screen lock.
Note: If you have previously tried to setup lock screen, you will have to reset device (factory reset/wipe). Otherwise the device will crash right after bootanim stops. Sorry for that!!!
chrmhoffmann said:
Fixed. Uploading new build that fixes bluetooth and screen lock.
Note: If you have previously tried to setup lock screen, you will have to reset device (factory reset/wipe). Otherwise the device will crash right after bootanim stops. Sorry for that!!!
Click to expand...
Click to collapse
Thank you Chris, bluetooth and screen lock are fixed!
chrmhoffmann said:
Fixed. Uploading new build that fixes bluetooth and screen lock.
Note: If you have previously tried to setup lock screen, you will have to reset device (factory reset/wipe). Otherwise the device will crash right after bootanim stops. Sorry for that!!!
Click to expand...
Click to collapse
Can it be dirty flashed or should we do a clean install? It's cumbersome working with LOS recovery so the less I have to deal with it the better. Other than recovery it's a nice smooth rom. Thanks again
Wheels564 said:
Can it be dirty flashed or should we do a clean install? It's cumbersome working with LOS recovery so the less I have to deal with it the better. Other than recovery it's a nice smooth rom. Thanks again
Click to expand...
Click to collapse
I did a clean install, you can try dirty flash.
moviefirst said:
I did a clean install, you can try dirty flash.
Click to expand...
Click to collapse
I did a clean install. Since I have two of these phones I'm using this one for testing purposes for now and have 14.1 on the other one for daily use. At some point I'll change over to the 18.1 phone. I really like that dark theme is enabled on this rom that 14.1 never had It helps save battery.
which version of magisk will work?
Could someone test Netflix?
chrmhoffmann said:
Could someone test Netflix?
Click to expand...
Click to collapse
Seems to work fine in the U.S. on wifi. I'll let it run for a while to make sure it's stable. It appears to be running 1080p.
chrmhoffmann said:
Could someone test Netflix?
Click to expand...
Click to collapse
Netflix working here in the Netherlands, but the phone is lagging and takes time to open apps. Also I think battery was better in 17.1
In the camera I've noticed there's no icon to save to sdcard. also unless they've change snap camera I can't get the back or home button to come up to exit camera. I have to long press the power button to get access to home icon.
[email protected] said:
which version of magisk will work?
Click to expand...
Click to collapse
Latest version 21.4 works.
Wheels564 said:
In the camera I've noticed there's no icon to save to sdcard. also unless they've change snap camera I can't get the back or home button to come up to exit camera. I have to long press the power button to get access to home icon.
Click to expand...
Click to collapse
.
Swipe down from top to see home button. Save to sd card did not work on 17.1 so he removed the icon. Thanks for helping me find new forum!
Link to gapps is not working here.
Sorry for partial reposting this from 17.1 forum. Seems very functional on WiFi. Phone does not read VZW SIM on boot and can't pick up APN. I had to choose VZWINTERNET APN. Then LTE works for 30 seconds. Data drops for maybe a minute, then falls back to 3G which works. If LTE worked I think we would be golden.
Also get "DM config update keeps stopping" error. Not sure if this is related to SIM. I used NikGapps but don't think it is related.
Photos can not access SD card but Files has no problem. Edit. My bad. Photos works fine.
kb8no said:
Latest version 21.4 works.
.
Swipe down from top to see home button. Save to sd card did not work on 17.1 so he removed the icon. Thanks for helping me find new forum!
Link to gapps is not working here.
Sorry for partial reposting this from 17.1 forum. Seems very functional on WiFi. Phone does not read VZW SIM on boot and can't pick up APN. I had to choose VZWINTERNET VPN. Then LTE works for 30 seconds. Data drops for maybe a minute, then falls back to 3G which works. If LTE worked I think we would be golden.
Also get "DM config update keeps stopping" error. Not sure if this is related to SIM. I used NikGapps but don't think it is related.
Photos can not access SD card but Files has no problem.
Click to expand...
Click to collapse
Get a logcat when your trying to use LTE for Chris. I don't have a sim in my 18.1 phone or I would.
Link to MindTheGapps from OP is obsolete and updated link found on LOS link. I used NikGapps before and started over with clean flash using MindTheGapps but found it made no difference. Phone still does not read VZW SIM on boot and can't pick up APN. I had to again manually choose VZWINTERNET APN. Then LTE works for 30 seconds. Data drops for maybe a minute, then falls back to 3G which works and I get about 2 Mbps. Continue to get error "DM config update keeps stopping". I now believe this is related.
Has anybody yet tried TWRP from 17.1 thread?
Advanced restart is missing from developer options.
Addendum: I put in my ATT SIM. It found the APN and imported it correctly. It started LTE and similarly died. Data never came back at a lower rate.
Latest rom : lineage-19.1-20220928-UNOFFICIAL-clover.zip, see this link :
Changelog :
- Sept Security Patch
- Update cam HAL to LA.UM.10.2.1.r1-03300-sdm660.0.
- Switch to 4.19 Nyx kernel
Installation instructions :
- Perform a backup of your current ROM (optional)
- Use latest 4.19 twrp created by pix106: https://androidfilehost.com/?fid=15664248565197205779)
- Reboot into recovery/twrp, format data, then reboot into recovery/twrp again.
- Flash ROM.
- Flash GApps is optional.
What's not working:
Let me know.
Known issues :
- Disabled Encryption
Please post the bug along with log (use syslog).
Source :
Kernel : clover
Device tree : sdm660
Update : latest version lineage-19.0-20211105-UNOFFICIAL-clover-new.zip pass safetynet.
Tried already in a mi pad 4 (8") and everything working so far.
Great work!
Does it support Monet theming?
Everything works OK, except I cannot change battery indicator (to circle, it just stays battery-shaped) and also can't show battery's %
Just nothing happens when i try to change these
redcord said:
Everything works OK, except I cannot change battery indicator (to circle, it just stays battery-shaped) and also can't show battery's %
Just nothing happens when i try to change these
Click to expand...
Click to collapse
Yes...some features are still not working as it depends on lineage source.
Installed Ok and runs - but with a few issues. Playstore not certified. Android system intelligence crashes regularly. It insisted on formatting my SD card so I let it but now I will have to put back all my music and books. Never mind. I will keep using it and updating for now.
Plus: I just tried my Bluetooth earbuds. They paired fine and are working with aptX
Plus: USB PD charger gives Charging rapidly
Everything works OK, except stop working Android System intelligence
Mi pad 4 (8") Wifi
GregEden said:
Installed Ok and runs - but with a few issues. Playstore not certified. Android system intelligence crashes regularly. It insisted on formatting my SD card so I let it but now I will have to put back all my music and books. Never mind. I will keep using it and updating for now.
Plus: I just tried my Bluetooth earbuds. They paired fine and are working with aptX
Plus: USB PD charger gives Charging rapidly
Click to expand...
Click to collapse
Playstore is certfied using patched boot.img by magisk and magisk hide. I didn't test using android system inteligence...will check later.
It's beautiful and quite stable, but with some minor issues.
1. Android System Intelligence keeps stop working. There's already a workaround by installing "ExtraPixel" module from this channel https://t.me/randomfilezz, but I suggest to make a fix inside the ROM.
2. Yep, Monet theming engine, ported by @kdrag0n , is open-sourced, so maybe consider adding it and makes it a better ROM. https://www.xda-developers.com/android-12-material-you-theming-system-recreated/
3. Always on display feature missing. Maybe you forgot to add it.
And the clock position and size on lock screen without notification is not accurate, compared to other devices.
Ralph Chen said:
And the clock position and size on lock screen without notification is not accurate, compared to other devices.
Click to expand...
Click to collapse
Did you compared to other device that running with lineageos 19.0?
Ralph Chen said:
It's beautiful and quite stable, but with some minor issues.
1. Android System Intelligence keeps stop working. There's already a workaround by installing "ExtraPixel" module from this channel https://t.me/randomfilezz, but I suggest to make a fix inside the ROM.
2. Yep, Monet theming engine, ported by @kdrag0n , is open-sourced, so maybe consider adding it and makes it a better ROM. https://www.xda-developers.com/android-12-material-you-theming-system-recreated/
3. Always on display feature missing. Maybe you forgot to add it.
Click to expand...
Click to collapse
Those features will be on this device once it is available in lineage source.
sabar_op said:
Did you compared to other device that running with lineageos 19.0?
Click to expand...
Click to collapse
I compared with other ROMs such as pixel experience.
Maybe it has to be in the center of the screen.
Ralph Chen said:
I compared with other ROMs such as pixel experience.
Maybe it has to be in the center of the screen.
Click to expand...
Click to collapse
Not sure about that, perhaps it is new style of lineageos 19..or lineage source not implemented yet to center the clock in the lockscreen...
My microphones are not working, via wired or bluetooth connections.
And the internal mic is dead too.
GregEden said:
My microphones are not working, via wired or bluetooth connections.
And the internal mic is dead too.
Click to expand...
Click to collapse
Are you sure? I am test it using mictest...and it works properly.
sabar_op said:
Are you sure? I am test it using mictest...and it works properly.
Click to expand...
Click to collapse
OK it works now. I did a reboot, and that did not help. I went into the recorder settings and toggled autodetect off then back on. And now it is working. I will test again tomorrow with my Duolingo lesson.
Dear all, may I ask for help please? I just manager to load 19.0 by following the above steps. However when it comes to the initial set up page, where it says checking for updates, it goes blank. How do I resolve this?
Btayyyy said:
Dear all, may I ask for help please? I just manager to load 19.0 by following the above steps. However when it comes to the initial set up page, where it says checking for updates, it goes blank. How do I resolve this?
Click to expand...
Click to collapse
I had that issue but I do not remember how I resolved it. I think I just kept swiping up until I could select next and it move on.