Mi10 T suddenly shut down and start very hard - Xiaomi Mi 10T / 10T Pro Questions & Answers

my mi 10T suddenly shut down then pressing to start can't start the phone so i press volume up+ start till open the bootloader menu and start the phone
now it repeated many times without any reason and block the sim card
so i removed the sim card and the holder of the double sim the phone work good but the ability to make restart is not working
i format the phone send it to repair center nothing changed
any suggestion

Related

[FIXED] TP2 Wouldnt turn on (couple probs lead to this)

Ok so lets start from the beginning. I dropped my phone and although no visible physical damage is visible my volume up button stopped working. When i used to turn on my phone the volume display wouldnt quit showing unless i pressed the volume down button, but volume up would not respond (im guessing vol up is constantly pressed)
I decided to flash my phone, but i also decided to perform Task29 (format internal storage) (From Here)because i have been flashing quite a bit. While doing this i completely forgot that my vol up button isnt working... so i was stuck on the first boot screen, with no internal memory, and since my vol up button is broken no way to get into the bootloader.
I decided to turn it off and leave my phone of the charger and go to sleep (because thats just what i do at night)
In the morning my phone would not turn on at all
Any ideas? I cant send it for repair to T-Mo because its HardSPL and i cant really return it to stock if it wouldnt turn on :/
Edit: Ok i think the non powering issue is battery, the main concern however is, how to enter bootloader without the use of the volume buttons... or flash a rom in any way so that the phone is actually usable.
Thanks in advance
Ok somehow on the millionth's time of trying to get into the bootloader (holding the vol down button) it finally worked =]

Freezes after startup, can't hard reset

So my girlfriend installed a wallpaper app (not sure which) on her Vodafone branded Arc, ever since then the phone freezes at the lock screen after booting. The unlock controls don't work and nothing else seems to either. If the screen times out or power button is pressed, screen goes off but won't come on again.
Would be happy to reset the phone but nothing works for hard reset (tried side buttons plus power and volume down or up and power) and we cannot get to the menus to do a soft reset.
Have also tried the SE PC companion software to update the phone but this requires you to change some things in the phone's menu after connecting too- which we can't...
Help!
Use Update Service form SE.
Power off
Then plug your usb while pressing Back Button.
It will works.
or
Use Flash tool.

Ascend P6 only vibrates and no touch working

Hello all i need your help if anyone knows.. before some day i buy an Ascend P6 from Ali express and i asked about Greek Language and they say me that its with it. but when i received the phone No greek no Google Play.. i contact with seller and he send me step by step how to put new firmware with language and Google Play..
At the middle of upgrading the phone just turn off and now when i turn it on only vibrates all the time and the touchscreen dont respond.. only the side buttons Vol + - and Power the phone turn on normally and starts the android in Chinese language but i cant do nothing cuz no touch.
i tried to open it in recovery mode pressing Vol - vol + and power and there only vibrates and i cant see any SD card i do wipe factory and cash but the same... only Android recovery (3a)
and the phone never shut down when i keep pressing the power button the phone only restart and turn on again... i have to wait battery to go 0% and the phone shout down by self.
anyone help?
Absolut22 said:
Hello all i need your help if anyone knows.. before some day i buy an Ascend P6 from Ali express and i asked about Greek Language and they say me that its with it. but when i received the phone No greek no Google Play.. i contact with seller and he send me step by step how to put new firmware with language and Google Play..
At the middle of upgrading the phone just turn off and now when i turn it on only vibrates all the time and the touchscreen dont respond.. only the side buttons Vol + - and Power the phone turn on normally and starts the android in Chinese language but i cant do nothing cuz no touch.
i tried to open it in recovery mode pressing Vol - vol + and power and there only vibrates and i cant see any SD card i do wipe factory and cash but the same... only Android recovery (3a)
and the phone never shut down when i keep pressing the power button the phone only restart and turn on again... i have to wait battery to go 0% and the phone shout down by self.
anyone help?
Click to expand...
Click to collapse
It is vibrating at huawei's logo ? If yes then ur phone is bricked.
To install Firmware Download it from website. Through sdcard reader put update.app in dload folder in sd card. Now drain battery and charge. Insert sd card in phone. Press vol+ Vol- and power button. It will flash the firmware. Simple.......
hannanzikrea said:
It is vibrating at huawei's logo ? If yes then ur phone is bricked.
To install Firmware Download it from website. Through sdcard reader put update.app in dload folder in sd card. Now drain battery and charge. Insert sd card in phone. Press vol+ Vol- and power button. It will flash the firmware. Simple.......
Click to expand...
Click to collapse
i did it but the phone cant see the SD card. pressing vol+ vol - and power take me to android recovery (3a) and the only thing i can do there is to reboot system all other dont work...
and no is not vibrating at huawei's logo.. its vibrates from the moment i press power on button the phone start up normal takes me to the homescreen of the phone but i cant press nothing cuz only vibrates and no touch...
Absolut22 said:
i did it but the phone cant see the SD card. pressing vol+ vol - and power take me to android recovery (3a) and the only thing i can do there is to reboot system all other dont work...
and no is not vibrating at huawei's logo.. its vibrates from the moment i press power on button the phone start up normal takes me to the homescreen of the phone but i cant press nothing cuz only vibrates and no touch...
Click to expand...
Click to collapse
Then take it to service center. Can be hardware issue i think ..
Sent from my P6-U06 using xda premium

Bricked lumia 930 - any way how to save data?

Hi everyone,
I have a Lumia 930 running on W10M (no idea what build) and it won't boot up. When I press the power button, the phone vibrates and a Nokia logo lights up for about 30-60 seconds, but then it just turns off. If I try to plug it to my laptop, the Nokia logo shows up for only about 10 seconds and it goes into a boot loop. The only way how to prevent the phone from endless restarting is to hold volume up and switch it into a recovery mode. It's not possible to soft or hard reset the phone using key combinations.
I don't know what bricked my phone, the battery just discharged completely one day and I can't turn it on since. I tried replacing the battery but it made no difference. I didn't try to install any tweak or anything like that, it just messed itself up.
The thing is that I didn't back up some pictures I really don't want to lose
Is there any way how to extract data from the phone? I know that Windows Device Recovery Tool would most likely make the phone work again, but then all data is wiped out...
Thanks for any suggestions.
take SIM card out
connect to charger and wait few hours
press Volume down and Power key until vibrate and release keys
if nothing helps, only way to restore phone is WDRT but you can kiss goodbye pictures and data from phone... next time use OneDrive (or any other cloud) for backup if phone dont have SD card... i loose my pictures to few years ago and now no chance to use phone without backup
In theory, the only way to get your files back is disassemble the logic board, desolder the emmc and solder it to a SD Card reader, then connect it to PC.
Internal storage is placed in MainOS\Data\Users\Public.
However, it's really difficult for a normal person to use that trick, and you can't get your files back if you turned on the device encryption.
Or... If there's a hack for Lumia x3x released like WP Internals did on Lumia x2x, you can enter Mass Storage mode directly instead of risky desolder emmc.

Question My Poco F3 froze then i proceeded to a hard reset. Phone goes into bootloop without any display. Any FIxes?

So I am normally using my phone scrolling through social media but it suddenly froze so I tried to hard reset it, but it goes in to a bootloop without any display on the screen. I could tell it is on a bootloop because of the repeating vibration everytime the phone boots up.
My device is Poco F3 (alioth) Running stock MIUI 12.5 bootloader unlocked and rooted with Magisk.
Things I have tried:
Long pressing power button, long pressing both power button and volume down button, long pressing power and volume up button, then long pressing all of them.
Plugging it on my PC but it doesn't even detect it. Tried inputting
Code:
adb devices
and
Code:
fastboot devices
Still doesn't work. I even made sure that my drivers are working so I tried it on my brothers Poco F3 and the PC can detect his phone through ADB commands.
Waiting for a day if it magically turns on again. Nope.
Charging it up because maybe the battery is low. Nope.
At this point my only two choices is opening up the back panel then replugging the battery so it completely turns off and hopefully boots up. But its a risky task since I don't have special tools to open up my phone, and my another choice is just bring it on a service center.
rururi said:
So I am normally using my phone scrolling through social media but it suddenly froze so I tried to hard reset it, but it goes in to a bootloop without any display on the screen. I could tell it is on a bootloop because of the repeating vibration everytime the phone boots up.
My device is Poco F3 (alioth) Running stock MIUI 12.5 bootloader unlocked and rooted with Magisk.
Things I have tried:
Long pressing power button, long pressing both power button and volume down button, long pressing power and volume up button, then long pressing all of them.
Plugging it on my PC but it doesn't even detect it. Tried inputting
Code:
adb devices
and
Code:
fastboot devices
Still doesn't work. I even made sure that my drivers are working so I tried it on my brothers Poco F3 and the PC can detect his phone through ADB commands.
Waiting for a day if it magically turns on again. Nope.
Charging it up because maybe the battery is low. Nope.
At this point my only two choices is opening up the back panel then replugging the battery so it completely turns off and hopefully boots up. But its a risky task since I don't have special tools to open up my phone, and my another choice is just bring it on a service center.
Click to expand...
Click to collapse
If the phone is bootloader locked don't do anything, take it to service center it's out of your hands.
If service center intends to charge you something well you could find some people online with edl accounts to do flashing for you but this sounds like hardware issue if you don't see poco logo ...
Edit: Sry didn't read the post fully - did u try fastboot devices when in fastboot mode - volume down and power ? If it is recognized and bootloader unlocked you can try flashing - go with xiaomi firmware, last thing you want is to be stuck on custom firmware when you take it in for repair - again only if bootloader is unlocked
since your brother pc can recognize, tried fastboot miui.eu on his pc
but I had this problem before and the only solution is to change mainboard on the xiaomi service center.
rururi said:
So I am normally using my phone scrolling through social media but it suddenly froze so I tried to hard reset it, but it goes in to a bootloop without any display on the screen. I could tell it is on a bootloop because of the repeating vibration everytime the phone boots up.
My device is Poco F3 (alioth) Running stock MIUI 12.5 bootloader unlocked and rooted with Magisk.
Things I have tried:
Long pressing power button, long pressing both power button and volume down button, long pressing power and volume up button, then long pressing all of them.
Plugging it on my PC but it doesn't even detect it. Tried inputting
Code:
adb devices
and
Code:
fastboot devices
Still doesn't work. I even made sure that my drivers are working so I tried it on my brothers Poco F3 and the PC can detect his phone through ADB commands.
Waiting for a day if it magically turns on again. Nope.
Charging it up because maybe the battery is low. Nope.
At this point my only two choices is opening up the back panel then replugging the battery so it completely turns off and hopefully boots up. But its a risky task since I don't have special tools to open up my phone, and my another choice is just bring it on a service center.
Click to expand...
Click to collapse
Do you have any clue as to why this happened? Any mods done besides applying Magisk?
If the software got damaged, you could try the EDL Mode but that's difficult. Should be your last resort.
If hardware, then I don't know unfortunately...but then how?
rururi said:
So I am normally using my phone scrolling through social media but it suddenly froze so I tried to hard reset it, but it goes in to a bootloop without any display on the screen. I could tell it is on a bootloop because of the repeating vibration everytime the phone boots up.
My device is Poco F3 (alioth) Running stock MIUI 12.5 bootloader unlocked and rooted with Magisk.
Things I have tried:
Long pressing power button, long pressing both power button and volume down button, long pressing power and volume up button, then long pressing all of them.
Plugging it on my PC but it doesn't even detect it. Tried inputting
Code:
adb devices
and
Code:
fastboot devices
Still doesn't work. I even made sure that my drivers are working so I tried it on my brothers Poco F3 and the PC can detect his phone through ADB commands.
Waiting for a day if it magically turns on again. Nope.
Charging it up because maybe the battery is low. Nope.
At this point my only two choices is opening up the back panel then replugging the battery so it completely turns off and hopefully boots up. But its a risky task since I don't have special tools to open up my phone, and my another choice is just bring it on a service center.
Click to expand...
Click to collapse
If it's recognised by your brothers pc, try that pc for flashing stock fastboot rom using miflash, and don't forget to choose 'flash and wipe' instead of 'flash and lock' in bottom right corner of miflash. Let us know how you get on
Happened today. Random bootloop while under normal use. Also occasionally attempted to trigger the emergency SOS call when power BTN clicks 5 times.
Saved by a solution in poco x3 thread.
The failure mode I experienced was possibly a "sticky" power button.unsure if it's an electrical short or something mechanical in nature tho since it's intermittent triggering of the power button.
Temp fix was some quick clicks of the power button a bunch of times(20-30 clicks?).
Also shut off the emergency sos function.
jowaii89 said:
Happened today. Random bootloop while under normal use. Also occasionally attempted to trigger the emergency SOS call when power BTN clicks 5 times.
Saved by a solution in poco x3 thread.
The failure mode I experienced was possibly a "sticky" power button.unsure if it's an electrical short or something mechanical in nature tho since it's intermittent triggering of the power button.
Temp fix was some quick clicks of the power button a bunch of times(20-30 clicks?).
Also shut off the emergency sos function.
Click to expand...
Click to collapse
Same... it started calling emergency number and wouldn't shut off by holding power button.
Worst device ever
{Mod edit: Inappropriate language edited. Oswald Boelcke}

Categories

Resources