Question Can't install update LE2127_11_C.20 - OnePlus 9 Pro

So, as the title says, I can't install that update. I'm currently on LE2127_11_C.16. About 1/5 of the way through downloading the update, it stops, and at the top of the screen it says "Couldn't update" and underneath in red letters, it says "Installation problem". The MSM tool won't communicate with my phone for some reason that I'm still trying to figure out. If it matters, everything is stock with the exception of my bootloader being unlocked. Does anybody know an alternate method to install the update, or convert to the global ROM so I can make use the Oxygen Updater?
EDIT
So, I found a solution that converted my phone to the global rom AND allowed me to get OTA updates again
1) Using the Oxygen Updater app, download the latest (full) global firmware, then copy the zip file to your adb/fastboot folder. Rename the zip file to firmware.zip
2) Download the TWRP recovery, rename the file to twrp.img and copy it to your adb/fastboot folder
3) Place your phone into fastboot mode
4) Using fastboot, boot the TWRP recovery image (fastboot boot twrp.img)
5) Once your phone has booted the TWRP image, select Advanced, then select ADB Sideload
6) Use ADB to sideload the downloaded firmware (adb sideload firmware.zip)
For anyone trying this, you'll need to flash the modem files from your stock firmware back onto your phone to get cell service

TinkerNerd said:
So, as the title says, I can't install that update. I'm currently on LE2127_11_C.16. About 1/5 of the way through downloading the update, it stops, and at the top of the screen it says "Couldn't update" and underneath in red letters, it says "Installation problem". The MSM tool won't communicate with my phone for some reason that I'm still trying to figure out. If it matters, everything is stock with the exception of my bootloader being unlocked. Does anybody know an alternate method to install the update, or convert to the global ROM so I can make use the Oxygen Updater?
Click to expand...
Click to collapse
If you are rooted with magisk, uninstall it.

TheGhost1951 said:
If you are rooted with magisk, uninstall it.
Click to expand...
Click to collapse
Not rooted, just unlocked the bootloader

TinkerNerd said:
Not rooted, just unlocked the bootloader
Click to expand...
Click to collapse
Look for this thread....
LE2127 OnePlus 9 Pro Custom ROM (T-Mobile)
I am seeing a lot of folks who are still (year later) unable to enjoy custom ROM with T-Mobile devices, so I wanted to quickly post this easy method for enjoying your device with FULL DATA. If you are using a T-Mobile branded OnePlus 9 Pro and...
forum.xda-developers.com

TheGhost1951 said:
Look for this thread....
LE2127 OnePlus 9 Pro Custom ROM (T-Mobile)
I am seeing a lot of folks who are still (year later) unable to enjoy custom ROM with T-Mobile devices, so I wanted to quickly post this easy method for enjoying your device with FULL DATA. If you are using a T-Mobile branded OnePlus 9 Pro and...
forum.xda-developers.com
Click to expand...
Click to collapse
I'm on the C.16 firmware, not the C.19 firmware, otherwise that would work

TinkerNerd said:
So, as the title says, I can't install that update. I'm currently on LE2127_11_C.16. About 1/5 of the way through downloading the update, it stops, and at the top of the screen it says "Couldn't update" and underneath in red letters, it says "Installation problem". The MSM tool won't communicate with my phone for some reason that I'm still trying to figure out. If it matters, everything is stock with the exception of my bootloader being unlocked. Does anybody know an alternate method to install the update, or convert to the global ROM so I can make use the Oxygen Updater?
Click to expand...
Click to collapse
If you are on the c16, that means you are using TMO firmware and that means you have something that is not stock in the firmware. If MSM doesn't recognize your phone, the correct drivers are not installed or installed properly. The Qualcomm USB drivers have to be installed with driver signature disabled on PC indicated by a watermark in lower right corner of PC stating "test mode". Test mode must be enabled before installing drivers then reboot PC!

So, I found a solution that converted my phone to the global rom AND allowed me to get OTA updates again
1) Using the Oxygen Updater app, download the latest (full) global firmware, then copy the zip file to your adb/fastboot folder. Rename the zip file to firmware.zip
2) Download the TWRP recovery, rename the file to twrp.img and copy it to your adb/fastboot folder
3) Place your phone into fastboot mode
4) Using fastboot, boot the TWRP recovery image (fastboot boot twrp.img)
5) Once your phone has booted the TWRP image, select Advanced, then select ADB Sideload
6) Use ADB to sideload the downloaded firmware (adb sideload firmware.zip)
For anyone trying this, you'll need to flash the modem files from your stock firmware back onto your phone to get cell service

Related

[Q] How to update to 4.4.3 with root

Hey all,
So I received a notification for a system update to 4.4.3, and I had survival mode in SuperSU checked, so I went ahead and followed the procedure. Turns off, then reboots into TWRP. From there I reboot again using the TWRP option, and it boots into android just fine. Notification is gone, still with root. But then I go to settings >> about to find that I'm still running on 4.4.2. Manually check for update, says there isn't one available. Give it a day or so and the notification comes up again. Repeat, and same thing. I'm stuck with the notification again.
So, how do I get rid of the notification, or more preferably, how to I update to 4.4.3 keeping the root? Thanks.
UnfriendlyTurtle said:
Hey all,
So I received a notification for a system update to 4.4.3, and I had survival mode in SuperSU checked, so I went ahead and followed the procedure. Turns off, then reboots into TWRP. From there I reboot again using the TWRP option, and it boots into android just fine. Notification is gone, still with root. But then I go to settings >> about to find that I'm still running on 4.4.2. Manually check for update, says there isn't one available. Give it a day or so and the notification comes up again. Repeat, and same thing. I'm stuck with the notification again.
So, how do I get rid of the notification, or more preferably, how to I update to 4.4.3 keeping the root? Thanks.
Click to expand...
Click to collapse
You can't update the "normal way" like that with a custom recovery. When you try to do that, it tries to boot into the stock recovery to update, but since you have a custom recovery, it will fail everytime if you do it that way. What you have to do is flash the OTA zip using TWRP. You can find the OTA zip in /cache on your device. Or you can just download the update zip from these forums.
UnfriendlyTurtle said:
Hey all,
So I received a notification for a system update to 4.4.3, and I had survival mode in SuperSU checked, so I went ahead and followed the procedure. Turns off, then reboots into TWRP. From there I reboot again using the TWRP option, and it boots into android just fine. Notification is gone, still with root. But then I go to settings >> about to find that I'm still running on 4.4.2. Manually check for update, says there isn't one available. Give it a day or so and the notification comes up again. Repeat, and same thing. I'm stuck with the notification again.
So, how do I get rid of the notification, or more preferably, how to I update to 4.4.3 keeping the root? Thanks.
Click to expand...
Click to collapse
Since 4.4.4 is out, just download the full firmware package from Google and flash system, boot. Only those two.
If you don't know how to do that, the Nexus 5 forums has some great stickies that are mostly relevant to this device.
charesa39 said:
You can't update the "normal way" like that with a custom recovery. When you try to do that, it tries to boot into the stock recovery to update, but since you have a custom recovery, it will fail everytime if you do it that way. What you have to do is flash the OTA zip using TWRP. You can find the OTA zip in /cache on your device. Or you can just download the update zip from these forums.
Click to expand...
Click to collapse
Right, thanks for the information. So I repeated and booted into TWRP again. Tapped 'Install', navigated to /cache, saw a couple of folders named 'back up', 'lost+found', and then a file name of a large string of letters followed by the recognisable "razor KTU70 from KOT49H", so I went ahead and flashed the latter, checking 'verify signature'. Runs through a few commands and in a few seconds comes back as failed, so I reboot into the OS.
Any ideas?
Aerowinder said:
Since 4.4.4 is out, just download the full firmware package from Google and flash system, boot. Only those two.
If you don't know how to do that, the Nexus 5 forums has some great stickies that are mostly relevant to this device.
Click to expand...
Click to collapse
I think I have an idea, but I'll check just to be sure. Thanks for the direction.
Exactly the same for me. Installing the ota sent me to my TWRP recovery. Reboot - > still in 4.4.2.
Reading this thread, I went to TWRP recovery, installed the update from cache and like you, it failed.
Any suggestions? Did your idea work?
Where do I find the 4.4.4 mentioned here and how do I flash it in TWRP? Is install the same as flash in TWRP?
Thanks.
Anderson2 said:
Exactly the same for me. Installing the ota sent me to my TWRP recovery. Reboot - > still in 4.4.2.
Reading this thread, I went to TWRP recovery, installed the update from cache and like you, it failed.
Any suggestions? Did your idea work?
Where do I find the 4.4.4 mentioned here and how do I flash it in TWRP? Is install the same as flash in TWRP?
Thanks.
Click to expand...
Click to collapse
If it fails look to see what the specific error is. It would help to know that. If you pulled it from your cache then I assume it was downloaded by itself and should be the correct OTA. I do NOT have the "Zip file signature verification." box checked or "Enable MD5 verification of backup files." but I am extremely careful to flash/install the correct files. The OTA installed fine for me two days ago using TWRP 2.7.1.0. The 4.4.4 mentioned earlier is the factory image. You will need adb and fastboot installed on your computer to flash the factory image or any image that is pulled from inside the factory image. Wug's toolkit will work also, I think, but I've never used any toolkits. Eventually there will be a stock 4.4.4 rom that you can flash/install in TWRP but I'm not aware of one right now.
You can take the normal updates with root and TWRP (I did), but a custom kernel will prevent them from installing.
I retried to install the downloaded ota file from cache, but this time I checked zip file verification and got the error message that zip verification failed.
File name was
df43279bcf6bb6a0ae403249c3e6f314d0a7eb77.signed-razor-KTU84L-from-KOT49H.df43279b.zip
So it seems the downloaded ota file may be corrupted. How do I get my Nexus 7 2013 to re-download a new one?
(The ota download for my Nexus 5 installed with no problems - but I think it didn't go through TWRP even though TWRP is installed there too).
Thanks
---------- Post added at 04:05 AM ---------- Previous post was at 03:59 AM ----------
Further
I renamed the ota file and in settings checked for system update and got a response that my system is upto date. But it is still 4.4.2.
Need to re-download the ota. How?
Changed the system date to 2 weeks earlier and succeeded in re-downloading the ota file.
So I retried installing it and it again took me to my TWRP recovery screen. I again installed the ota from cache and again the zip verification failed : 1
And the update failed again.
Still on 4.4.2
Did not change any system files as far as I know.
Need help.
Why don't you guys download the stock firmware from Google (link in my signature), and use fastboot to flash system.img, boot.img (DO NOT run the batch file)? If it's a lack of knowledge, all you need do is ask, and I or someone else would be happy to teach you how to use it (fastboot). If you're going to be modifying your Nexus device, you need to learn fastboot. You guys have got to learn the proper way to do things.
You've put forth so much effort to fix a system that is not meant for modified (rooted, customized) phones. You can't fix it, stop trying. Just do it the proper way. And do not use a toolkit. They don't teach you anything, they spoon-feed.
Aerowinder said:
Why don't you guys download the stock firmware from Google (link in my signature), and use fastboot to flash system.img, boot.img (DO NOT run the batch file)? If it's a lack of knowledge, all you need do is ask, and I or someone else would be happy to teach you how to use it (fastboot). If you're going to be modifying your Nexus device, you need to learn fastboot. You guys have got to learn the proper way to do things.
You've put forth so much effort to fix a system that is not meant for modified (rooted, customized) phones. You can't fix it, stop trying. Just do it the proper way. And do not use a toolkit. They don't teach you anything, they spoon-feed.
Click to expand...
Click to collapse
I don't use a toolkit and would be happy to flash the system.Img and boot.img but need instructions on how to do it. You said the stock firmware link is in your signature but it isn't.
I would like to skip 4.4.3 and go directly from 4.4.2 to 4.4.4. I'm talking about a nexus 7 2013 wifi.
So I need the following information to proceed .
1. The Link to download system.img and boot.img for the nexus 7 2013 wifi. Which files exactly?
2. I have fastboot and adb installed on my windows 7 laptop because I used them (once) to root but I don't remember how I used them that one time. How exactly do I use fastboot to flash 4.4.4 ?
3. I presume I will lose root. How do I regain it after the above.
Thank you.
Anderson2 said:
I don't use a toolkit and would be happy to flash the system.Img and boot.img but need instructions on how to do it. You said the stock firmware link is in your signature but it isn't.
I would like to skip 4.4.3 and go directly from 4.4.2 to 4.4.4. I'm talking about a nexus 7 2013 wifi.
So I need the following information to proceed .
1. The Link to download system.img and boot.img for the nexus 7 2013 wifi. Which files exactly?
2. I have fastboot and adb installed on my windows 7 laptop because I used them (once) to root but I don't remember how I used them that one time. How exactly do I use fastboot to flash 4.4.4 ?
3. I presume I will lose root. How do I regain it after the above.
Thank you.
Click to expand...
Click to collapse
1. The Google firmware link in my signature is the one you want. You say you have the 2013 wifi model, aka flo, aka razor. "Factory Images "razor" for Nexus 7 [2013] (Wi-Fi)" is the proper section for you. You want 4.4.4 (KTU84P), and that's at the bottom of the razor section. Click the link to download.
2. Download the most up to date ADB/Fastboot from the link in my signature (19.0.2 (API 19)). Don't extract it yet.
3. You will lose root. Download SuperSU from my signature. 2.00 is the current version. After you download that, you can put it on your device so you can flash it in recovery in a few minutes.
The firmware you downloaded is razor-ktu84p-factory-b1b2c0da.tgz. This is a compressed archive, and you will need to extract it. If you don't know how, 7-Zip should work.
So, you've extracted the files. Delete flash-all.bat, flash-all.sh, flash-base.sh (so you don't accidentally run them).
Now, all you have left is bootloader-flo-flo-04.02.img and image-razor-ktu84p.zip.
Extract image-razor-ktu84p.zip to the current directory, so you will now have bootloader-flo-flo-04.02.img, boot.img, cache.img, recovery.img, system.img, userdata.img, android-info.txt, image-razor-ktu84p.zip in your folder.
Delete userdata.img, flashing this on accident will wipe your data. Delete image-razor-ktu84p.zip, android-info.txt, cache.img, recovery.img (this is stock recovery, you want TWRP).
Now you have boot.img, bootloader-flo-flo-04.02.img, system.img.
Remember the ADB & Fastboot zip you downloaded from my signature? Extract it to the directory with bootloader-flo-flo-04.02.img, boot.img, system.img. All 4 files. This directory now contains 7 files.
Back out of the razor-ktu84p folder. Just one step back. Now, hold shift the right-click the razor-ktu84p folder. Select Open command window here.
Reboot your device to bootloader mode. Do so by shutting it down. Then while the power is off, hold volume down and press the power button. Release these buttons when you see the big green Android.
In your command window, type the command: fastboot devices
Your device with it's serial number should show up on the list. If it does not there is a problem and you need to stop here.
If the device shows up, let's update it.
fastboot flash bootloader bootloader-flo-flo-04.02.img
<wait for it to finish>
fastboot reboot-bootloader
<wait for it to reboot>
fastboot flash system system.img
<wait for it to finish>
fastboot flash boot boot.img
<wait for it to finish>
fasboot reboot-bootloader
Done with fastboot.
At this point, enter recovery (TWRP) and wipe cache and Dalvik under advanced wipe.
Remember the SuperSU you downloaded earlier and put on your device for later? Flash that now.
Reboot, all done. Most of this is just juggling files around. If you have any questions ask.
You are wonderful aerowinder. This is just what I needed to go ahead. Thank you so much.
About your signature, it doesn't show the links when viewed in my Tapatalk version, but I went to the Web view and got it from there. (just FYI if others ask about your links).
is it possible to just flash the system img in fastboot? It's still the same bootloader, not updated? Could I just flash the whole zip by sideloading in adb and TWRP? Just a lottle confused. Thanks!
droider137 said:
is it possible to just flash the system img in fastboot? It's still the same bootloader, not updated? Could I just flash the whole zip by sideloading in adb and TWRP? Just a lottle confused. Thanks!
Click to expand...
Click to collapse
If you were already on 4.4.3, all you need to do is fastboot flash system.img, that is correct.
No, you can't flash that firmware zip in recovery.
thanks
Hi Aerowinder
Thanks again for the excellent instructions. Everything went like clockwork until it didn't ?......
I got to the point where I issued the command fastboot devices which did show the tablet serial number. But my next command to flash the bootloader img gave me the error:
Cannot open 'bootloader-flo-flo-04.02.img
(I had copy pasted the command from your instructions).
The subdirectory below the command window contains that file (one of 7 files)
Sorry. What should I do?
In case you need the info, the device screen showed
Fastboot mode
Product name - flo
Variant - flo 32G
Hw version - rev_e
Bootloader version - flo-04.02
Carrier info = none
Serial number - xxxx
Signing - yes
Secure boot enabled
Lock state - unlocked
Thanks again.
Aerowinder, you are not only an expert but an excellent teacher. Your instructions above should be a sticky.
I'm all done. Everything is fine.
The problem I had above was a file path problem. Not sure why you told me to open the command window in the parent folder. When I opened it in the folder containing the seven files all your commands worked fine. (Except for your last one where you had a spelling mistake: fasboot instead of fastboot).
Thank you very much.

[GUIDE] How To Flash TWRP And Root Xiaomi Mi Max

EDIT 8/2/19: I do not own this device anymore. So i cannot and dont know if anything changed about the procedures unlocking rooting etc. BUT if you are getting any trouble i might can help you. Comment your thoughts below
Hey guy, i saw a lot of guys here wondering how to root and flash twrp recovery on thier devices . Today i am gonna show you how to do that.
First of all make sure 3 things :
1. backup your images, contacts, music tracks etc on a external SD CARD, or on your computer.
2. You MUST have the BOOTLOADER unlocked. To do that, read this guide http://en.miui.com/thread-202290-1-1.html
3.Charge your device to 80%+
HOW TO FLASH TWRP AND ROOT MI MAX
1. Go to Settings-About phone-Find the MIUI VERSION, and tap on it for 5-10 times.
2. Go back to settings, sellect adittional settings. click on Developer options, and select enable
3. Find the option USB Debugging and enable it.
4. Download the TWRP recovery from the link
5. rename the file to 'recovery.img'
6. Move the image to the same file where the ADB was installed ( it should be on Computer-> C: -> Adb )
7. Open the adb folder
8. Press and hold the shift key and right click in the folder
9. click on the option "Open command window here"
10. Boot your device on fastboot mode by turning it off, pressing Power and the Volume Down buttons together, and then connect it with your computer
11. First type this command "fastboot devices" to check if your device is into fastboot mode
12. Enter the command "fastboot flash recovery recovery.img"
13. Enter the command "fastboot boot recovery.img"
14. Your phone is now in TWRP recovery mode ( if it is not, the write on ADB: reboot recovery )
15. select Install Zip and click on 'SuperSu.zip'
16. corfirm the flash
17. reboot your device
18. DONT PANIC IF YOU DEVICE WONT TURN ON. Sometimes need to wait 10-20 secs.
DOWNLOADS
1. ADB- (https://forum.xda-developers.com/showthread.php?t=2588979)
2. XIAOMI MI MAX HYDROGEN DRIVERS (http://xiaomiadvices.com/download-xiaomi-usb-drivers/)
3. TWRP RECOVERY IMAGE https://dl.twrp.me/hydrogen/ LATEST VERSION IS twrp-3.2.3-0
4. BetaSuperSu 2.74 http://www13.zippyshare.com/v/OFQGvIyA/file.html
RESERVED
The thread must be removed to XIAOMI MI MAX GUIDES, NEWS, & DISCUSSION
Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab.
Click to expand...
Click to collapse
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?
noob456 said:
Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?
Click to expand...
Click to collapse
hello, please write again your problem. I can understand what do you mean.
StonebridgeGr said:
hello, please write again your problem. I can understand what do you mean.
Click to expand...
Click to collapse
Ok just two questions then, because I'm not sure what you can't understand. Please explain.
1) What Android, MIUI and kernel did you root?
2) Do you have SuperSu.zip in TWRP 3.0.3 by default? You didn't say anything in your guide about downloading it and from where + what version.
noob456 said:
Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?
Click to expand...
Click to collapse
This twrp. Img it's for all the versions but only for mi max. Not the prime . This twrp doesn't contain superSU. If I remember correctly. But if on the TWRP contain the super su. Don't say yes. Just flash it like I saying on the guide. Maybe they upload a newest version. You can use the new. I think I put the official website . I will check it.
Ok thanks for the answer. Please check from where I download SuperSu - which version would be best.
Please tell me your Android, kernel and MIUI version that you rooted.
noob456 said:
Ok thanks for the answer. Please check from where I download SuperSu - which version would be best.
Please tell me your Android, kernel and MIUI version that you rooted.
Click to expand...
Click to collapse
LOL I forgot to add the superSU link...
That's what I told you. Then please do.
noob456 said:
That's what I told you. Then please do.
Click to expand...
Click to collapse
ok on the first post you can find all the links. if i miss something please tell me here !
Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?
noob456 said:
Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?
Click to expand...
Click to collapse
It's compatible with mi max. You will not have any problem. Don't worry
noob456 said:
Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?
Click to expand...
Click to collapse
Waiting to tell me if everything went fine with the installation and the flashing
Hey, tried following Your guide to install a new rom last night. Great guide for noobs like me, but it may be worth renaming the thread to something like "How to flash whatever makes You happy on to Your Mi Max". These instructions seem to work fine regardless of what's being flashed. Great job, mate!
So I finally tried it and it was successful for me as well! But I used the latest version of TWRP (3.1.0) and SuperSu (2.79-20161205). Please add a point in your tutorial to upload SuperSU.zip to the phone first, because out of emotion, I forgot... So I flashed TWRP, booted it and then... ups... no SuperSu So I wanted to reboot the phone to upload SuperSU but since only SuperSU patches dm-verity (the thing I was afraid of the most - I told you before), my phone got into boot-loop and didn't want to start. So I just uploaded SuperSU to a memory card, entered Fastboot Mode again with key-combination, plugged the cable, typed "fastboot reboot-bootloader" command and was again in TWRP to flash SuperSu from my memory card.... ufff.
So I would reedit it a bit:
0. Copy SuperSU.zip to the phone/memory card!
1. Go to Settings-About phone-Find the MIUI VERSION, and tap on it for 5-10 times.
2. Go back to settings, sellect adittional settings. click on Developer options, and select enable
3. Find the option USB Debugging and enable it.
4. Download the TWRP recovery from the link
5. rename the file to 'recovery.img'
6. Move the image to the same file where the ADB was installed ( it should be on Computer-> C: -> Adb )
7. Open the adb folder
8. Press and hold the shift key and right click in the folder
9. click on the option "Open command window here"
10. Boot your device on fastboot mode by turning it off, pressing Power and the Volume Down buttons together, and then connect it with your computer
11. First type this command "fastboot devices" to check if your device is into fastboot mode
12. Enter the command "fastboot flash recovery recovery.img"
13. Enter the command "fastboot boot recovery.img" - the phone will get disconnected from your PC automatically
14. Your phone is now in TWRP recovery mode (it takes about 30-60 seconds before FastBoot screen switches into TWRP - wait patiently)
15. select Install Zip and click on 'SuperSu.zip'
16. corfirm the flash
17. reboot your device
18. DONT PANIC IF YOU DEVICE WONT TURN ON. Sometimes need to wait 10-20 secs.
Hey, I just got connected with WiFi and new MIUI 8.2.3.0 MBCMIDL wants to be installed, although the phone is rooted with bootloader unlocked. Is it safe to apply the update? Is it goona remove root so that I have to go over the process again?
So I tried the update. First time it said it failed, second time it downloaded the whole ROM after which it rebooted device and TWRP started doing "something" - I don't know what. After that the phone didn't want to boot, and what's even better didn't want to run recovery (TWRP), instead it went into fastboot. What I had to do was to use MiPhoneDrivers from this topic: https://forum.xda-developers.com/mi-max/how-to/guide-install-global-miui8-root-t3435594 (including MiFlash 2015, because 2016 version didn't want to work properly on my PC) and follow the instruction from official MIUI website to flash from scratch the new ROM MIUI 8.2.3.0 which I did. After that my phone was alive again. I installed TWRP and rooted the phone again. Now I've got MIUI 8.2.30 rooted. :] End of the story so far. My settings left untouched - icons, wallpaper etc. So that would be the way to update MIUI if they prepare a new one.
Is there anyway to root the phone without connecting it to pc?
noob456 said:
So I tried the update. First time it said it failed, second time it downloaded the whole ROM after which it rebooted device and TWRP started doing "something" - I don't know what. After that the phone didn't want to boot, and what's even better didn't want to run recovery (TWRP), instead it went into fastboot. What I had to do was to use MiPhoneDrivers from this topic: https://forum.xda-developers.com/mi-max/how-to/guide-install-global-miui8-root-t3435594 (including MiFlash 2015, because 2016 version didn't want to work properly on my PC) and follow the instruction from official MIUI website to flash from scratch the new ROM MIUI 8.2.3.0 which I did. After that my phone was alive again. I installed TWRP and rooted the phone again. Now I've got MIUI 8.2.30 rooted. :] End of the story so far. My settings left untouched - icons, wallpaper etc. So that would be the way to update MIUI if they prepare a new one.
Click to expand...
Click to collapse
Thanks for saving me the trouble.
Can someone help with a better method of applying updates?
Will downloading the zip (1.4GB approx) and flashing via TWRP help?

ERROR MODE Attention! Please update system again.

Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!!
Mohammadreza76646 said:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!!
Click to expand...
Click to collapse
Doing the update second time is fine, and best way to restore full stock. But you needed to use Oreo version of no-check recovery and the Oreo partition to flash it to.
So if still able to get into twrp, can try with correct no-check recovery and correct partition it's flashed to.
Also
With multi tool , make sure you put check mark on emui 8. Up in upper right corner. That way it uses Oreo partition names and file not nougat.
The partition length over message usually means nougat file or partition name used on Oreo system
mrmazak said:
Doing the update second time is fine, and best way to restore full stock. But you needed to use Oreo version of no-check recovery and the Oreo partition to flash it to.
So if still able to get into twrp, can try with correct no-check recovery and correct partition it's flashed to.
Also
With multi tool , make sure you put check mark on emui 8. Up in upper right corner. That way it uses Oreo partition names and file not nougat.
The partition length over message usually means nougat file or partition name used on Oreo system
Click to expand...
Click to collapse
Thank you for your answer.
But I try to extract update.app (oreo version) but its failed! huawei update extractor cant open it and 7zip cant extract it with (unexpected error...)!
And unfortunately my TWRP dos not work anymore
Mohammadreza76646 said:
Thank you for your answer.
But I try to extract update.app (oreo version) but its failed! huawei update extractor cant open it and 7zip cant extract it with (unexpected error...)!
And unfortunately my TWRP dos not work anymore
Click to expand...
Click to collapse
I give my phone to a friend to work on it. If he can't fix it I try new multi tools version to flash phone.
Mohammadreza76646 said:
Thank you for your answer.
But I try to extract update.app (oreo version) but its failed! huawei update extractor cant open it and 7zip cant extract it with (unexpected error...)!
And unfortunately my TWRP dos not work anymore
Click to expand...
Click to collapse
On the extractor app. On options tab uncheck the verify header option, it should extract then.
Then perhaps first do these three partitions.
Kernel.img
Ramdisk.img
Then
twrp_ramdisk or for stock use recovery_ramdisk
Mohammadreza76646 said:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!!
Click to expand...
Click to collapse
I ever have similiar problem with you dude, but it's solved now, if you always stuck on " its OK but when my phone want to start its stuck on google page "just a sec...", its call google accont verification, i'll by bypass with this script, save as to .bat and put on adb folder
adb devices
adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1
adb shell am start -n com.google.android.gsf.login/
adb shell am start -n com.google.android.gsf.login.LoginActivity
pause
in fastboot type:
fastboot -w
after all it's works to me to bypass google account verification
and if now your problem is
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
i solve with re-flash system from this
https://androidfilehost.com/?fid=673956719939830152
fastboot flash system system.img
and doing TWRP Flashing
https://forum.xda-developers.com/devdb/project/?id=25826#downloads
fastboot flash recovery_ramdisk complete_twrp_ramdisk.img
and voila my problem solved..
mrmazak said:
On the extractor app. On options tab uncheck the verify header option, it should extract then.
Then perhaps first do these three partitions.
Kernel.img
Ramdisk.img
Then
twrp_ramdisk or for stock use recovery_ramdisk
Click to expand...
Click to collapse
Hello again dude.
Finally I flashed my phone and I got the system installed.
But now my phones IMEI is lost. and I cant put sim on it!!!
what should I do now???
FRP is locked! (
Mohammadreza76646 said:
Hello again dude.
Finally I flashed my phone and I got the system installed.
But now my phones IMEI is lost. and I cant put sim on it!!!
what should I do now???
FRP is locked! (
Click to expand...
Click to collapse
So now is locked frp. Does phone have twrp or stock now.?
I think when you tried to install the oreo update for second time, you followed same tutorial as the first time. And that made you problem worse. The tutorial has you flash no-check recovery to 2 partition by block number. 22 & 29. On nougat that is "recovery" and "recovery2". On Oreo partion table it is "reserved2" & "erecovery_vendor"
I don't know how to fix imei. Have hope that if to ucan have a full ota install , maybe can be fixed.
There is available a "service rom" (used to fix most all problem) for Europe region with l21.
I can share link to site with service rom if you want , but I have not used it myself so not gonna be much help with it.
Link is to rusian language page. Google should translate for you.
https://4pda.ru/forum/index.php?showtopic=879524&view=findpost&p=73818595
mrmazak said:
So now is locked frp. Does phone have twrp or stock now.?
I think when you tried to install the oreo update for second time, you followed same tutorial as the first time. And that made you problem worse. The tutorial has you flash no-check recovery to 2 partition by block number. 22 & 29. On nougat that is "recovery" and "recovery2". On Oreo partion table it is "reserved2" & "erecovery_vendor"
I don't know how to fix imei. Have hope that if to ucan have a full ota install , maybe can be fixed.
There is available a "service rom" (used to fix most all problem) for Europe region with l21.
I can share link to site with service rom if you want , but I have not used it myself so not gonna be much help with it.
Link is to rusian language page. Google should translate for you.
https://4pda.ru/forum/index.php?showtopic=879524&view=findpost&p=73818595
Click to expand...
Click to collapse
It have stock recovery.
Mohammadreza76646 said:
It have stock recovery.
Click to expand...
Click to collapse
in summery. because i have been going back and forth in multiple different groups, multiple problem, i cant remember it all.
you have broken system, from failed root attempt, followed by failed update.
device condition is as follows.
--system not booting
--stock recovery loads
--fastboot/bootloader loads, but is in frp lock status
options are limited, at best.
I think "dload" method with service rom is best.
other option is maybe paid service like dc-unlock. But I can recall some note on there service about frp-unlock, that can only be used on device with working system. (of course if was working system, wouldn't need dc-unlock)
mrmazak said:
in summery. because i have been going back and forth in multiple different groups, multiple problem, i cant remember it all.
you have broken system, from failed root attempt, followed by failed update.
device condition is as follows.
--system not booting
--stock recovery loads
--fastboot/bootloader loads, but is in frp lock status
options are limited, at best.
I think "dload" method with service rom is best.
other option is maybe paid service like dc-unlock. But I can recall some note on there service about frp-unlock, that can only be used on device with working system. (of course if was working system, wouldn't need dc-unlock)
Click to expand...
Click to collapse
No. System boot successfully!
I will send you screenshot:
Mohammadreza76646 said:
No. System boot successfully!
I will send you screenshot:
Click to expand...
Click to collapse
here you are
Mohammadreza76646 said:
here you are
Click to expand...
Click to collapse
what about the "about phone" screen
what does it show for version?
If is all stock you should be able to go into deveolper options and enable "oem unlock". If it is greyed out and cannot switch it. Try First to remove google account (all accounts ). and reboot. See if can change then. If not, try Second to do "fastboot oem relock [enter your bootloader code here]
after relock and rebooted oem switch should be enabled again.
****RELOCK IS ONLY ADVISED IF 100% STOCK ROM****
otherwise relock could make more trouble.
Still not sure how to get IMEI back even if unlocked frp though.
**And please stop posting in other threads , the same problem , because you are getting help here.
your post in recovery thread is off topic to that thread and just makes the forum harder to maintain.
mrmazak said:
what about the "about phone" screen
what does it show for version?
If is all stock you should be able to go into deveolper options and enable "oem unlock". If it is greyed out and cannot switch it. Try First to remove google account (all accounts ). and reboot. See if can change then. If not, try Second to do "fastboot oem relock [enter your bootloader code here]
after relock and rebooted oem switch should be enabled again.
****RELOCK IS ONLY ADVISED IF 100% STOCK ROM****
otherwise relock could make more trouble.
Still not sure how to get IMEI back even if unlocked frp though.
**And please stop posting in other threads , the same problem , because you are getting help here.
your post in recovery thread is off topic to that thread and just makes the forum harder to maintain.
Click to expand...
Click to collapse
Thanks )
I'm so sorry for my posts, it's because I don't have a stable connection and I can't see notification of my thread.
I gave my phone to friend an he fix IMEI (I don't know how)
But OEM is steel lock.
I think he did it with using special box.
Mohammadreza76646 said:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!![/QUOTE
Are u able.to boot into twrp ?
Click to expand...
Click to collapse
Hello I have a Huawei Mate-SE (with bootloader unlocked and rooted with magisk v16). I have been using the android custom rom RRO v6 (RR-O-v6.0.0-20180401-bnd-OpenKirin) for around a month now. I got this exact same problem about the White Screen saying "ERROR MODE Attention...." since I updated the Magisk to latest version (from the installed application) and rebooted my phone. SInce I rebooted I am getting that same error which makes the phone loops into it for a few times and then it loads the Huawei eRecovery that offers me some options that I am not sure what would do to my phone.
I have been trying to connect to adb tools/fastboot but it doesn't detect the phone and im pretty sure I have the device drivers installed on my computer since nothing have changed in my pc for a month now since I flashed RRO on it.
Is there any other mode besides recovery that would allow me to connect adb/fastboot to it? Or does anyone knows how should I proceed?
IonDEfeso said:
Hello I have a Huawei Mate-SE (with bootloader unlocked and rooted with magisk v16). I have been using the android custom rom RRO v6 (RR-O-v6.0.0-20180401-bnd-OpenKirin) for around a month now. I got this exact same problem about the White Screen saying "ERROR MODE Attention...." since I updated the Magisk to latest version (from the installed application) and rebooted my phone. SInce I rebooted I am getting that same error which makes the phone loops into it for a few times and then it loads the Huawei eRecovery that offers me some options that I am not sure what would do to my phone.
I have been trying to connect to adb tools/fastboot but it doesn't detect the phone and im pretty sure I have the device drivers installed on my computer since nothing have changed in my pc for a month now since I flashed RRO on it.
Is there any other mode besides recovery that would allow me to connect adb/fastboot to it? Or does anyone knows how should I proceed?
Click to expand...
Click to collapse
I have seen where the magisk update screwed up and patches the kernel intead of the ramdisk.
Power off , long press power button.
Hold volume down and plug in USB from PC.
This should cause it to boot into fastboot mode.
Then flash the stock kernel. And the stock or first patched ramdisk. (From earlier root)
mrmazak said:
I have seen where the magisk update screwed up and patches the kernel intead of the ramdisk.
Power off , long press power button.
Hold volume down and plug in USB from PC.
This should cause it to boot into fastboot mode.
Then flash the stock kernel. And the stock or first patched ramdisk. (From earlier root)
Click to expand...
Click to collapse
Hi thank you I was able to finally detect the device now. I am unsure about the kernel is that the recovery.img or system.img files I downloaded (i saved every file i used when I installed the rom) or do I need to look for the kernel somewhere else? I do have the complete_twrp_ramdisk.img file though.
Edit, I did more research and found the stock kernel is withing the boot.img file which I dont have so I looked up for the official BND-L34 oreo update and im currently downloading to extract the stock boot.img from the update.zip and flash it. Since that download was going to take me a while anyway i tried flashing the twrp recovery file without success (didn't changed anything) so i guess I should follow the instructions you gave me by flashing the kernel first then the twrp recovery.
mrmazak said:
I have seen where the magisk update screwed up and patches the kernel intead of the ramdisk.
Power off , long press power button.
Hold volume down and plug in USB from PC.
This should cause it to boot into fastboot mode.
Then flash the stock kernel. And the stock or first patched ramdisk. (From earlier root)
Click to expand...
Click to collapse
Do you know what the boot.img files name is after extraction?
I have extracted all 3 update zips and cannot find anything called boot.img
By the way, thank you.. After updating magisk I have been dealing with failed recovery and failed boot for over a week and this is the first reply anywhere that looks promising
IonDEfeso said:
Hi thank you I was able to finally detect the device now. I am unsure about the kernel is that the recovery.img or system.img files I downloaded (i saved every file i used when I installed the rom) or do I need to look for the kernel somewhere else? I do have the complete_twrp_ramdisk.img file though.
Edit, I did more research and found the stock kernel is withing the boot.img file which I dont have so I looked up for the official BND-L34 oreo update and im currently downloading to extract the stock boot.img from the update.zip and flash it. Since that download was going to take me a while anyway i tried flashing the twrp recovery file without success (didn't changed anything) so i guess I should follow the instructions you gave me by flashing the kernel first then the twrp recovery.
Click to expand...
Click to collapse
if you were on oreo. then there is not a boot.img, instaed there is seperate ramdisk.img and kernel.img.
i have all the files already extracted for oreo and a backup from nougat as well.
https://androidfilehost.com/?w=files&flid=265998
make sure you know what you are doing before flashing.
for example. on oreo the boot and recovery share one kernel image. SO if kernel is messed up you will not be able to boot "boot" or "recovery"

rooting ( after unlocking bootloader)

So after you unlocked the boot loader ( see my previous post)
you can start rooting with magisk manager / patching the boot.img from the original firmware
I used this thread in order to get root ; i modified the contents so it would fit the moto phone a bit better:, but thnx goes to Ibolito over at the pixel 3 forums
1 ) Download the latest Android factory image for your device ("see this guide on where to find it.
2 ) Extract the "boot.img" file from the downloaded image and copy it to your phone.
Warning! Make absolutely sure the firmware is exactly the same as the installed one. If not, you might loose touch.
Be aware that LMSA will download the latest firmware, even if it is not yet installed. That might break your touchscreen
Click to expand...
Click to collapse
3 ) Download latest Magisk Manager application on your phone and install it :
Link
4 )Press on the Install Magisk button (the one on the top, not the Magisk Manager), then Install > Select and Patch a File and now select the Boot.img file you extracted earlier. When the process is done, just put the patched boot.img file on your computer in the same folder as your ADB and FASTBOOT tools, the file's name is magisk_patched.img
edit: i received a comment that the name might be something like Magisk_patched_somerandomletters_.img since the latest magisk update
5 ) Enable adb debugging on your phone and connect it to your computer via USB.
Open a command prompt on your computer and migrate to the folder where the ADB and Fastboot tools are located.
(for exemple, for me it's : cd C:\adb).
7 ) Reboot your phone to fastboot by typing adb reboot bootloader
8 ) Flash the Boot.img you just patched with magisk by typing fastboot flash boot magisk_patched.img
extra: You could test a single boot with that image by typing "fastboot boot magisk_patched.img"
if it boots fine you should have root for this single boot / magisk would show as installed.
9 ) When it's done, reboot by typing fastboot reboot
10 ) Open your Magisk Manager app and check if everything is good, and it should be
extra info:
I did worry a bit because the original boot.img is 64 megs , while the patched version is only 12
but i went with it, and it was fine.
good luck to you all
Edit: rewritten entire post so it would look more like a guide, and extra warning because a lot of people seem to loose touch if they don't have the exact same firmware downloaded as on their phone.
Thanks for posting this. I unlocked my bootloader and would like to root like you did.
Do you install magisk first on your phone, then get the magisk_patched file from your phone? Or is the magisk_patched file obtained somewhere else?
testtubebaby said:
Thanks for posting this. I unlocked my bootloader and would like to root like you did.
Do you install magisk first on your phone, then get the magisk_patched file from your phone? Or is the magisk_patched file obtained somewhere else?
Click to expand...
Click to collapse
You need to install the magisk manager
In magisk manager you can click on "install (magisk)"--> "by patching a file"
then you select the file to be patched ( extracted from the original rom )
after that you can copy the patched file from your phone back to the pc and install it via fastboot.
After that magisk is installed
i hope you succeed
pjottrr said:
You need to install the magisk manager
In magisk manager you can click on "install (magisk)"--> "by patching a file"
then you select the file to be patched ( extracted from the original rom )
after that you can copy the patched file from your phone back to the pc and install it via fastboot.
After that magisk is installed
i hope you succeed
Click to expand...
Click to collapse
The firmware I see is the EU firmware. I don't see the GB firmware in the link you posted (it's RETGB). Any idea where I can find the correct firmware?
Sorry, no idea, i found the provided link via google,
testtubebaby said:
The firmware I see is the EU firmware. I don't see the GB firmware in the link you posted (it's RETGB). Any idea where I can find the correct firmware?
Click to expand...
Click to collapse
https://mirrors.lolinet.com/firmware/moto/sofiar/official/
zuggi_m said:
https://mirrors.lolinet.com/firmware/moto/sofiar/official/
Click to expand...
Click to collapse
@zuggi_m , how does posting the same url help?
i don't see a retgb here ....
Maybe someone with more dev experience can tell if you need the exact same firmware or if the version numbers are the same it is ok to use that file ?
No fastbootd?
One Hyper needs fastbootd in order to flash boot and root
mingkee said:
No fastbootd?
One Hyper needs fastbootd in order to flash boot and root
Click to expand...
Click to collapse
i don't really understand the question i guess,
a magisk patched boot is flashed via fastboot. after that you have magisk installed and root access.
pjottrr said:
i don't really understand the question i guess,
a magisk patched boot is flashed via fastboot. after that you have magisk installed and root access.
Click to expand...
Click to collapse
Yours should be G8 Power (9)
Native Android 10 uses fastbootd to flash boot, dtbo, and recovery
mingkee said:
Yours should be G8 Power (9)
Native Android 10 uses fastbootd to flash boot, dtbo, and recovery
Click to expand...
Click to collapse
maybe i'm missing your point here, my description is just so people who have to figure it out can just use my steps to get root, it is indeed based on fastboot flashing . so i'm not sure what you are trying to say, or am i misinterpreting something?
https://forum.xda-developers.com/motorola-one-hyper/development/rom-omnirom-t4044405
I did root on One Hyper (shipped with Android 10) using fastbootd method
Used old method soft brick my One Hyper
That's why I'd like to know
pjottrr said:
so after you unlocked the boot loader ( see my previous post)
you can start rooting with magisk manager / patching the boot.img from the original firmware
I used this thread in order to get root
you need to download the firmware for our device,
That can be found here;
https://mirrors.lolinet.com/firmware/moto/sofiar/official/RETEU/
after that, extract, patch, fastboot install patched version, done.
I did have some issues with the current magisk manager ( from highonandroid, i did find another source, installed version 7.5.1 of the magisk manager from this source
and that one was able to patch the boot.img
I did worry a bit because the original boot.img is 64 megs , while the patched version is only 12
but i went with it, and it was fine.
good luck to you all
Click to expand...
Click to collapse
There's a head up
US version: Sofia
The rest: Sofiar
I will buy US G Power in May and let's the fun begin
Check out One Hyper general to install Dolby Atmos and it can be toggle on/off.
Has anyone tried copying something to the root of the phone or making build.prop edits? I have the Stylus and have achieved root using the same method, however there is something not quite right with the permissions. I cannot make changes to any root files.
CCivale said:
Has anyone tried copying something to the root of the phone or making build.prop edits? I have the Stylus and have achieved root using the same method, however there is something not quite right with the permissions. I cannot make changes to any root files.
Click to expand...
Click to collapse
So you should know G Stylus ROM is Sofiap.
Be aware the way Android 10 flashing is different.
Download and install the latest ADB in order to access fastbootd (fastboot reboot fastboot) and flash boot, recovery, dtbo, vbmeta, and super
Hmmmm, I will have to read more about fastbootd in your other thread.
I did use the boot.img for the sofiap.
Hello,
I followed all the instructions in the first post and was able unlock the bootloader, install magisk, and use it to make the magisk_patched.img file from a boot.img file.
The only variation, was that I got my boot.img file from mirrors.lolinet.com/firmware/moto/sofia/official/RETUS/XT2041-4_SOFIA_RETUS_10_QPM30.80-13-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip since my phone is a US retail model.
After flashing, the phone boots up properly but the touchscreen does not work.
The side buttons do work and I was able to reboot into recovery. In recovery, the build on the phone is indicated as QPM30.80-51. The build in the above indicated file is QPM30.80-13-2. Could this be the source of the problem?
I have tried flashing the original boot.img (from the file above) back and the touchscreen still does not work. I have also tried “wipe data/factory reset” in recovery.
hazd said:
Hello,
I followed all the instructions in the first post and was able unlock the bootloader, install magisk, and use it to make the magisk_patched.img file from a boot.img file.
The only variation, was that I got my boot.img file from mirrors.lolinet.com/firmware/moto/sofia/official/RETUS/XT2041-4_SOFIA_RETUS_10_QPM30.80-13-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip since my phone is a US retail model.
After flashing, the phone boots up properly but the touchscreen does not work.
The side buttons do work and I was able to reboot into recovery. In recovery, the build on the phone is indicated as QPM30.80-51. The build in the above indicated file is QPM30.80-13-2. Could this be the source of the problem?
I have tried flashing the original boot.img (from the file above) back and the touchscreen still does not work. I have also tried “wipe data/factory reset” in recovery.
Click to expand...
Click to collapse
maybe try with the "correct" firmware? ( not sure if the minor diference changes anything, but you could try....
i found it here:
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
pjottrr said:
maybe try with the "correct" firmware? ( not sure if the minor diference changes anything, but you could try....
i found it here:
rsdsecure-cloud.motorola.com/download/SOFIA_RETAIL_QPM30.80-51_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
Thanks for finding this link.
Unfortunately i am not able to download this for some reason. I get an access denied error message.
edit:
I was able to find the most recent firmware here:
github.com/AndroidDumps/motorola_sofia_dump/tree/sofia_retail-user-10-QPM30.80-51-bd0b4-release-keys
I downloaded just the boot.img file and flashed it. That fixed the touchscreen issue. I then used magisk to batch the boot.img and I now have root.
Just to be clear, this worked on a US retail moto g power purchased unlocked from best buy. The phone model number is XT2041-4.
Hope this helps.
hazd said:
Thanks for finding this link.
Unfortunately i am not able to download this for some reason. I get an access denied error message.
edit:
I was able to find the most recent firmware here:
github.com/AndroidDumps/motorola_sofia_dump/tree/sofia_retail-user-10-QPM30.80-51-bd0b4-release-keys
I downloaded just the boot.img file and flashed it. That fixed the touchscreen issue. I then used magisk to batch the boot.img and I now have root.
Just to be clear, this worked on a US retail moto g power purchased unlocked from best buy. The phone model number is XT2041-4.
Hope this helps.
Click to expand...
Click to collapse
I downloaded the kernel and waiting for the unit.
I can flash full ROM with fastboot and fastbootd, but just flashing kernel would be much faster.
Moreover, check One Hyper general to get Dolby Atmos because you can turn on and off anytime you want.

How To Guide [Stock ROM] How to root the Snapdragon Moto E 2020

Alexenferman is not responsible for any damages or bricks made to your device. Please do some research if you have any concerns about rooting, its features and downsides. You are choosing to make these modifications, you should blame yourself for any mistakes you make.
Rooting may require a factory reset, please backup your data. Rooting will void your device warrany. By rooting your device, you will not be able to install OTA updates on your phone.
US carrier specific devices such as Verizon and Sprint might not be bootloader unlockable, therefore, not rootable.[/B]
You will need:
Platform Tools (Download from here)
Motorola Drivers
Windows or Linux PC
Bootloader Unlocked Moto E 2020
Your phone must be bootloader unlocked. Rooting your phone and not unlocking the bootloader will result in a soft brick.
Download the latest Magisk Manager APK from Github: https://github.com/topjohnwu/Magisk/releases/download/manager-v8.0.0/MagiskManager-v8.0.0.apk
Install the APK file. Make sure to enable "Unknown Sources" in the Settings app
Patching the boot image
To retrieve the boot image in order to patch it, you will need to download the stock ROM for your specific variant.
Download the ROM from your variant from here: https://mirrors.lolinet.com/firmware/moto/ginna/official/
To check which region is your device, go to Settings > About Phone > Software Channel.
After downloading, open the ROM zip file with an archive manager.
Extract the boot.img file only.
Transfer the boot.img file on your phone.
On your phone, open the Magisk app.
Select "Install" > "Install" > "Select and Patch a File"
Locate the boot image in the internal storage on your phone. Select the boot.img file.
Transfer the magisk_patched.img file on your computer.
Rooting the device
Boot the device into fastboot mode by holding the [Volume Down] and [Power] buttons.
Connect your phone to your PC.
On your PC, open a fastboot console window.
Type:
Code:
fastboot devices
Your phone serial number should be displayed along with the word "fastboot" or "device" in the console.
Now, type the following commands:
Code:
fastboot flash boot_a patched_boot.img
fastboot flash boot_b patched_boot.img
Replace patched_boot.img with the path to your boot image we patched previously.
To reboot the device, type:
Code:
fastboot reboot
Once the device rebooted, open the Magisk app.
If you see the "Magisk is installed" message, you have successfully rooted your device!
You are done!
To view instructions with images, follow these instructions: https://www.alexenferman.com/articles/MotoE2020/root-moto-e-2020-magisk
I can confirm this works, I was about to give up on root or TWRP until I saw this. I'm now rooted, but I still can't find a download link for the latest TWRP for the Ginna model.
Hypercore said:
I can confirm this works, I was about to give up on root or TWRP until I saw this. I'm now rooted, but I still can't find a download link for the latest TWRP for the Ginna model.
Click to expand...
Click to collapse
Me neither, can anyone provide a TWRP for ginna?
I eventually found it after a ton of digging. I've uploaded it to my drive to assure the link stays active for anyone else who may need it.
For peace of mind, here's the VirusTotal scan HERE.
And here is the link to twrp-3.4.0-10_0-ginna HERE.
Hypercore said:
I eventually found it after a ton of digging. I've uploaded it to my drive to assure the link stays active for anyone else who may need it.
For peace of mind, here's the VirusTotal scan HERE.
And here is the link to twrp-3.4.0-10_0-ginna HERE.
Click to expand...
Click to collapse
Confirmed working. Tyvm!
Before I brick my phone. Can anyone confirm if the Tracphone version XT2052DL is rootable?
I'd like to know, too. Can we root our Tracfone XT2025DLs? Anyone successful?
dragonfire0501 said:
Before I brick my phone. Can anyone confirm if the Tracphone version XT2052DL is rootable?
Click to expand...
Click to collapse
Ranthalion75 said:
I'd like to know, too. Can we root our Tracfone XT2025DLs? Anyone successful?
Click to expand...
Click to collapse
I have one too and I've tried to unlock the bootloader however Motorola's website says the bootloader for this phone is not unlockable. It seems like this is what's preventing me from being able to install a different firmware like the stock one or root the device.
I do not know if there is any sort of workaround for this
For some reason on a Moto E, after rescuing using the Moto rescue assistant and then using
you guys can also use OFox Recovery and swipe magisk to root
Thank you. I used this guide to root my Moto E
QPGS30.82-135-2_Root.img
This method works well for QPGS30.82-135-2, but I just attempted it with QPGS30.82-135-9 and unfortunately the Magisk patched boot image will not work. I tried it 3 times, re-patching boot image each time. I suppose Motorola updated something in android to block this?
i can't get this to work at all, i cannot find a matching stock firmware being qpg30.82-135, there's no extra S and nothing else after the 135, got this phone from my motorola insiders rewards and now it's bootlooping after trying the 135-2 patched image
Has anyone been able to root and hopefully install a custom recovery on the lastest update? Mine is QPGS30.82-135-14, and so far I've only been able to get orangefox to boot but couldn't get it to decrypt my storage or install magisk. I tried twrp first, but to no avail, touch screen still doesn't work on it, so now I'm asking on a few different threads for this phone lol. Any help would be great!
Do you know of an updated method to get it to flash correctly? I was able to boot into ofox, but couldn't get it to properly flash. Ended up stuck on a screen that said my phone was unlocked and couldn't be trusted and that it'll reboot in 5 seconds. I don't know much about ofox either, been using twrp for years lol, it looks too different. Anyhow, any help would be appreciate much!
ace120ms said:
you guys can also use OFox Recovery and swipe magisk to root
Click to expand...
Click to collapse
You have to fastboot boot it anyway I don't have this phone anymore so idk
bouyakasha said:
This method works well for QPGS30.82-135-2, but I just attempted it with QPGS30.82-135-9 and unfortunately the Magisk patched boot image will not work. I tried it 3 times, re-patching boot image each time. I suppose Motorola updated something in android to block this?
Click to expand...
Click to collapse
I have the same problem with QPGS30.82-135-9. I can't get it to boot after Magisk patched boot image.

Categories

Resources