I just updated from September stable to qrp1 v2 and after wipe touchscreen become unresponsive. Only PWR and VOL +- are working. Any idea what goes wrong?
costolleumus said:
I just updated from September stable to qrp1 v2 and after wipe touchscreen become unresponsive. Only PWR and VOL +- are working. Any idea what goes wrong?
Click to expand...
Click to collapse
try re-flashing oct stable
flash.android.com/back-to-public
Click to expand...
Click to collapse
Android Flash Tool just Downloading Software in loop
I had an issue with October playstore update where my phone would loop continuously on the lockscreen. Dirty flash via flashtool fixed it. Then I patched a fresh boot img and flashed it. I swear by android flashtool
Just to report: after whipping both slots everything was going smooth with Android Flash Tool.
Related
Hey gus i need your help.
I got a SM T800X demo version which i had Android 5.02 installed, but I wanted german language, so i tried to flash it and failed.
Before flashed it was this Version:
Galaxy Tab S
Android 5.0.2
Build number: LRX22G.T800XXU1BOCC
Kernel Version: 3.4.39-4403645
Then i flashed it with odin, and it said succsess. But then it gets stuck on SAMSUNG Screen.
Odin and Recovery mode still work.
I used this Firmware: T800XXU1ANK1_T800XAR1ANI1_HOME.tar.md5
I also tried this one: T800XXU1ANF8_T800XAR1ANF6_HOME.tar.md5
can anyone help me to get it running again?
whuamai said:
Hey gus i need your help.
I got a SM T800X demo version which i had Android 5.02 installed, but I wanted german language, so i tried to flash it and failed.
Before flashed it was this Version:
Galaxy Tab S
Android 5.0.2
Build number: LRX22G.T800XXU1BOCC
Kernel Version: 3.4.39-4403645
Then i flashed it with odin, and it said succsess. But then it gets stuck on SAMSUNG Screen.
Odin and Recovery mode still work.
I used this Firmware: T800XXU1ANK1_T800XAR1ANI1_HOME.tar.md5
I also tried this one: T800XXU1ANF8_T800XAR1ANF6_HOME.tar.md5
can anyone help me to get it running again?
Click to expand...
Click to collapse
I have had this happen to me, read this thread for help http://forum.xda-developers.com/galaxy-tab-s/help/stuck-sudden-bootloop-t3067280
Also try press and hold power, home and volume up and down together to power of and then press and hold power, home and volume up to get to recovery where you can data factory reset and wipe cache which is what I did and mine did boot up eventually.
you had a different problem.
yours worked fine before and you couldnt get into recovery mode.
Mine doesnt boot after installing new ROM,
but recovery and odin mode stil work.
I made factory reset and wiped cash already before. Doesnt work.
whuamai said:
you had a different problem.
yours worked fine before and you couldnt get into recovery mode.
Mine doesnt boot after installing new ROM,
but recovery and odin mode stil work.
Click to expand...
Click to collapse
When I flashed the Lollipop rom for the first time is when I had the problem of not booting up so get your self into stock recovery and wipe and then restart and wait for it to boot up it did take a while to boot up.
that didnt work, but
ITS SOLVED
i installed this one:
T800XXU1BOCC_T800OXA1BOC4_XEF
and it worked. and its german
omfg im so happy.
whuamai said:
that didnt work, but
ITS SOLVED
i installed this one:
T800XXU1BOCC_T800OXA1BOC4_XEF
and it worked. and its german
omfg im so happy.
Click to expand...
Click to collapse
Ok well done
maxal said:
I have had this happen to me, read this thread for help http://forum.xda-developers.com/galaxy-tab-s/help/stuck-sudden-bootloop-t3067280
Also try press and hold power, home and volume up and down together to power of and then press and hold power, home and volume up to get to recovery where you can data factory reset and wipe cache which is what I did and mine did boot up eventually.
Click to expand...
Click to collapse
You saved me!
Thank you
maxal said:
I have had this happen to me, read this thread for help http://forum.xda-developers.com/galaxy-tab-s/help/stuck-sudden-bootloop-t3067280
Also try press and hold power, home and volume up and down together to power of and then press and hold power, home and volume up to get to recovery where you can data factory reset and wipe cache which is what I did and mine did boot up eventually.
Click to expand...
Click to collapse
I just wanted to say thank you. This also worked for me just now (i had flashed stock 6.02 back in as i was having issues seeing 5Ghz networks with my current image). It did take a while to boot, and had me thinking the procedure would not work...good thing you pointed out to wait patiently! :good:
Hi guys,
I have pie rom (Hades stock pie rom) I tried to root that rom, I flashed bypass etc... then rom started to boot, but it is booting and booting, then EVERY 16 minutes restarts to boot again. I cant even turn it off, i held power off buton for good 30s but nothing happend. How to solve that and how to root? I think my mistake was I used newest Super SU (beta one)
A5 2017 Hades Stock PIE rom
Thank you
SkopiX said:
Hi guys,
I have pie rom (Hades stock pie rom) I tried to root that rom, I flashed bypass etc... then rom started to boot, but it is booting and booting, then EVERY 16 minutes restarts to boot again. I cant even turn it off, i held power off buton for good 30s but nothing happend. How to solve that and how to root? I think my mistake was I used newest Super SU (beta one)
A5 2017 Hades Stock PIE rom
Thank you
Click to expand...
Click to collapse
You should root with magisk. It is up to date, and it is made to support these newer versions of android. Reboot to twrp by holding power, home, and volume up simultaneously. You might need to reflash hades.
SkopiX said:
Hi guys,
I have pie rom (Hades stock pie rom) I tried to root that rom, I flashed bypass etc... then rom started to boot, but it is booting and booting, then EVERY 16 minutes restarts to boot again. I cant even turn it off, i held power off buton for good 30s but nothing happend. How to solve that and how to root? I think my mistake was I used newest Super SU (beta one)
A5 2017 Hades Stock PIE rom
Thank you
Click to expand...
Click to collapse
FYI - To power off you need to hold power & vol- until it turns off (20-30 seconds), not just the power button.
Follow the advice from @SnowFuhrer and let us know how you get on
thank you guys, I let phone discharge but now I made it work, thanks to you guys
Hey
I installed the recent upgrade to my OP 5T and now the phone is not getting switched on, only the 1+ logo appears on pressing the power button and soon after it gets switched off.
I have tried the 'Volume Up + Power' button combination and fastloader screen appears, i tried to enter recovery mode but it just gets switched off after the 1+ logo when i select recovery mode.
OP5T_Unbrick_tool_dumpling ... not working:
The battery is getting charged normally and this is an android upgrade issue. I am a newbie, any help would be appreciated.
Thanks
A possibility could be that you tried to do stock update local method through twrp or custom recovery... That's similar to what happened on mine when I did that on the first beta 10 update. If so I flashed latest stock recovery through the fastboot menu by plugging into computer and using ADB fastboot command "fastboot flash recovery" minus brackets and dragged the recovery over and pressed enter.
It appears to do it as the update launched some sort of boot script but can't be carried out without stock recovery leading to a sort of boot loop.
Also I found while trying to fix this if I updated from a ROM where it didn't have treble support or wiped the vendor (I did when panicking lol). I had to firstly install the stock ROM that introduced treble then install the beta 10 update.
Sorry if that was all pointless or irellivent but hope you get ur problem fixed soon.
Hello guys ! I have SM-A505FN , when I woke up it was stuck on boot logo, I did a factory reset, same... Then I downloaded the latest firmware and flashed it via odin the results are same. It updated bl, plugged to smartswitch and can't do a emergency software recovery. Any solutions ?
Reflash I guess, make sure its the latest and greatest and for your model / carrier
InFam0us-1985 said:
Reflash I guess, make sure its the latest and greatest and for your model / carrier
Click to expand...
Click to collapse
Yea I reflashed several times, maybe it's a hardware problem ? It is my wife's device I don't know maybe it was one UI 2.0 and I flashed 2.5 I guess... Don.t know what to do...
you did a factory reset from the standard recovery?
InFam0us-1985 said:
you did a factory reset from the standard recovery?
Click to expand...
Click to collapse
Yes, that was the first step, but it was still stuck, then I decided to flash a latest firmware, results are the same, it updated bootloader ( I don' know ) Have no idea what to do ...
if it was android 9 > android 10, yes it updates the boot loader, this should be fine tho, just means you cant go back to android 9
InFam0us-1985 said:
if it was android 9 > android 10, yes it updates the boot loader, this should be fine tho, just means you cant go back to android 9
Click to expand...
Click to collapse
Some "technician" tried to help me and now it is all black screen, it wont react to buttons or usb cable, just a black screen, don't know how to turn on
bekasulaberidze said:
Some "technician" tried to help me and now it is all black screen, it wont react to buttons or usb cable, just a black screen, don't know how to turn on
Click to expand...
Click to collapse
Try holding both vol up and vol down while plugging it into a computer... but if you have flashed firmware before you probably have them?
samsung drivers - https://developer.samsung.com/mobile/android-usb-driver.html
It's also worth trying the same thing but force rebooting it by holding power down and power until it vibrates.
If not - then maybe hard brick?
InFam0us-1985 said:
Try holding both vol up and vol down while plugging it into a computer... but if you have flashed firmware before you probably have them?
samsung drivers - https://developer.samsung.com/mobile/android-usb-driver.html
It's also worth trying the same thing but force rebooting it by holding power down and power until it vibrates.
If not - then maybe hard brick?
Click to expand...
Click to collapse
Yea I've tried everything man, he said that he flashed a emergency file, hell knows what he have done, now I am trying everything vol down + power, with/without plugged in and nothing, just a black screen.
Apparently power + vol up + vol down pushed me right into fastboot, I was trying just vol-up or vol-down with power.
{Mod edit}
I just flashed TWRP after unlocking my phone like I have with every other OnePlus I've owned but after the "Flash Current TWRP option" and rebooting I'm stuck at an unresponsive pin screen. Nothing I do seems to receive input and locking/unlocking for a swipe to unlock is unresponsive as well. I tried rebooting to fastboot so I can reflash but it immediately jumps into TWRP.
Has anyone has this issue with the 9 Pro? This is my 3rd OP phone to do this process and the first I've had this issue with. Thanks!
pmarco99 said:
Apparently power + vol up + vol down pushed me right into fastboot, I was trying just vol-up or vol-down with power.
I just flashed TWRP after unlocking my phone like I have with every other OnePlus I've owned but after the "Flash Current TWRP option" and rebooting I'm stuck at an unresponsive pin screen. Nothing I do seems to receive input and locking/unlocking for a swipe to unlock is unresponsive as well. I tried rebooting to fastboot so I can reflash but it immediately jumps into TWRP.
Has anyone has this issue with the 9 Pro? This is my 3rd OP phone to do this process and the first I've had this issue with. Thanks!
Click to expand...
Click to collapse
You must be on Android 12 if it's doing that. TWRP isn't ready for a12 yet. You can only boot it not flash it on a12
pmarco99 said:
Apparently power + vol up + vol down pushed me right into fastboot, I was trying just vol-up or vol-down with power.
I just flashed TWRP after unlocking my phone like I have with every other OnePlus I've owned but after the "Flash Current TWRP option" and rebooting I'm stuck at an unresponsive pin screen. Nothing I do seems to receive input and locking/unlocking for a swipe to unlock is unresponsive as well. I tried rebooting to fastboot so I can reflash but it immediately jumps into TWRP.
Has anyone has this issue with the 9 Pro? This is my 3rd OP phone to do this process and the first I've had this issue with. Thanks!
Click to expand...
Click to collapse
Personally, I can only boot but not flash, even on OOS11.
When I boot on it, the touchscreen works while if I flash and boot on it, the touchscreen does not work.
Yeah there is no reason nowadays to flash TWRP on OnePlus phones. I haven't in the last two.
Also, haven't flashed twrp in a while; I only boot it!
schmeggy929 said:
Yeah there is no reason nowadays to flash TWRP on OnePlus phones. I haven't in the last two.
Click to expand...
Click to collapse
I need to flash an update. I figured I needed TWRP. Can I just flash it through adb or will it brick?
SeeTurtle said:
I need to flash an update. I figured I needed TWRP. Can I just flash it through adb or will it brick?
Click to expand...
Click to collapse
What update