Mi max 1 doesnt remain in fastboot mode - Xiaomi Mi Max Questions & Answers

Hello i have a mi max unlocked. When i try to root it, i enter in fastboot mode, i read fastboot but after 10 seconds it power off. And so my windows 10 with adb driver doesnt recognize it. I have inserted debug mode in developer option. Why?

Related

cmd fastboot not working

tried all sorts of driver can someone pls help me with the drivers..i need a fully working fastboot drvier for windows 7
PlZZZZ Help i need to flash a rom
Explain your problem, not what you think the solution is
i have even a laptop with htc sync but in my desktop even though it is installed in the cmd it says waiting for device
So... is fastboot and usb debugging turned on in the settings?
fastboot commands only work when the phone is in FASTBOOT mode. If the phone is turned ON (in android) you have to use adb commands.
Get the latest version of HTC Sync Manager for the latest drivers
If you are trying to use a fastboot command, you must place your phone in fastboot mode.
To do this,
Hold down your power button and volume down rocker until the phone reboots and you will be presented with the bootloader
Then, using the volume rockers to navigate, select fastboot (it should already be selected) and press the power button to select.
Connect the USB to your phone and your PC and you will now be in Fastboot USB mode.
i just need proper drivers extracted from any one of ur comp
U can find the latest drivers for One X here: http://forum.xda-developers.com/showthread.php?t=1603252
K
the link can download unwanted toolbars
ok here is direct dw : http://cmw.22aaf3.com/common/HTCDriver3.0.0.007.exe

Fastboot Mode

I want to unlock bootloader of my Mi Max 3. Already follow the procedure to unlock. Login to Mi Account in Mi Unlock Tool. My phone is in fastboot mode. When I connect the phone to PC, the fastboot mode on the phone suddenly disappear. On the top left of the phone screen there is a message "Tap any key to reboot". I try few times, the problem still assist. How to solve this
try a different USB port on your computer.
Try other USB drive, still the problem still there. Should I reset my phone?
cikli66 said:
Try other USB drive, still the problem still there. Should I reset my phone?
Click to expand...
Click to collapse
It would be easier to enable USB debug, get the unlock program started and phone connected, and use adb command to reboot to fastboot mode:
> adb reboot bootloader

I need your help

install a custom rom for my xiaomi redmi note 8 and when the installation is finished my device does not turn on (turn on and turn off) attached video.please if you can help me I would appreciate it.
PD: my pc doesn't even recognize it, ATTACHED 2 VIDEOS.
https://mega.nz/#!QtEH2A4L!UOzCSjwxSs22bjsLJE9ZsJRZzD0FcEaOCti9RUn8nLw
TI1002539352 said:
install a custom rom for my xiaomi redmi note 8 and when the installation is finished my device does not turn on (turn on and turn off) attached video.please if you can help me I would appreciate it.
PD: my pc doesn't even recognize it, ATTACHED 2 VIDEOS.
https://mega.nz/#!QtEH2A4L!UOzCSjwxSs22bjsLJE9ZsJRZzD0FcEaOCti9RUn8nLw
Click to expand...
Click to collapse
What ROM are you flashing?
What device are you using? Ginkgo or Willow?
Can you access recovery or fastboot mode?
1) pixel experience
2) willow
3) I can't get into fastboot mode it turns off instantly.
TI1002539352 said:
1) pixel experience
2) willow
3) I can't get into fastboot mode it turns off instantly.
Click to expand...
Click to collapse
- Try to enter to recovery.
- Try to enter to fastboot BUT with device connected to PC.
- if none works be sure that you are proceeding with device totally/really off; for this connect to your PC then press the 3 buttons for aprox. 5 seconds and when you see that your device is shutting down press vol. down + pwr to enter to fastboot.
I'll try

Strange Problem On Bootloader/Fastboot

Hello Everyone,
I Have A Strange Problem When I Press Power+Down Button Then Device Goes To Bootloader/Fastboot And Mi Bunny Appears, But After 3-5 Seconds Mobile Device Automatically Switch Off Without Connecting The Cable Or Doing Anything.
Note That, I Have A Latest Build V11.0.9.0.QDLMIXM Installed Without Rooting And Device Working Properly. Since I Just Want To Root The Device And Bootloader Is Unlocked. The Problem Is That Device Doesn't Stay On Bootloader/Fastboot Mode.
Thanks In Advance !!!
Thanks,
MUHAMMAD Asif Qasim
Can you get fastboot to see it in this brief window? I'm wondering if it will stay if it sees fastboot but maybe reboots because it doesn't? (Or because some other app on your PC is confusing it?)
a1291762 said:
Can you get fastboot to see it in this brief window? I'm wondering if it will stay if it sees fastboot but maybe reboots because it doesn't? (Or because some other app on your PC is confusing it?)
Click to expand...
Click to collapse
Thankyou For Prompt Response.
I Couldn't Get Your Point. The Problem Is That Device Doesn't Stay On Bootloader/Fastboot Mode Even I Connect The Cable Or Not. Its Automatically Switch Off With In 3-5 Seconds.
In Addition To That, I Can Use ADB Commands & Shows My Mobile Connectivity When I Use.
Thanks,
MUHAMMAD Asif Qasim
aasiaasi said:
I Couldn't Get Your Point. The Problem Is That Device Doesn't Stay On Bootloader/Fastboot Mode Even I Connect The Cable Or Not. Its Automatically Switch Off With In 3-5 Seconds.
Click to expand...
Click to collapse
I run this on my PC and it waits for a device.
$ fastboot getvar current-slot
< waiting for any device >
3-5 seconds should be enough time to connect your device and see if fastboot can talk to it (and if that stops it from rebooting).
If it happens when there is no cable plugged in... that's a bit more concerning. Does it also happen if you get to fastboot by typing adb reboot bootloader (from a normally-booted system)?
a1291762 said:
I run this on my PC and it waits for a device.
$ fastboot getvar current-slot
< waiting for any device >
3-5 seconds should be enough time to connect your device and see if fastboot can talk to it (and if that stops it from rebooting).
If it happens when there is no cable plugged in... that's a bit more concerning. Does it also happen if you get to fastboot by typing adb reboot bootloader (from a normally-booted system)?
Click to expand...
Click to collapse
Thank You Dear. Yes I Can Use The Command On ADB When Mobile Is Switched On Here Is The Example Snapshot.
The Problem Is That When I Boot To Bootloader It Doesn't Stay On Bootloader And Shutdowns Automatically With In 3-5 Seconds. As You Suggested Me To Check The Command When Mobile Is On Bootloader Mode The Shell Shows "waiting for any device". Ahd Restarts Automatically.
aasiaasi said:
As You Suggested Me To Check The Command When Mobile Is On Bootloader Mode The Shell Shows "waiting for any device". Ahd Restarts Automatically.
Click to expand...
Click to collapse
I don't know exactly what the bootloader does while in fastboot mode, but I'm going to guess it draws the rabbit and then gets ready to talk to the PC. And something fails and it dies.
If it's working normally, that's something... But it's going to stop you from unlocking the bootloader.
I have no idea how to fix. Maybe EDL with the test points? There are 2 aboot partitions (apparently hold fastboot).
# ls -l aboot*
lrwxrwxrwx 1 root root 21 1971-09-16 02:23 aboot_a -> /dev/block/mmcblk0p31
lrwxrwxrwx 1 root root 21 1971-09-16 02:23 aboot_b -> /dev/block/mmcblk0p32
I think the fastboot mode will exit automatically if it doesn't receive any command from PC. It happened to me before and about the <waiting for any device> when you did a command probably related to it. Check if the driver are properly installed because it happened to me on Windows 10 but not on Windows 8.1.
Mewwo2 said:
I think the fastboot mode will exit automatically if it doesn't receive any command from PC. It happened to me before and about the <waiting for any device> when you did a command probably related to it. Check if the driver are properly installed because it happened to me on Windows 10 but not on Windows 8.1.
Click to expand...
Click to collapse
Thankyou Mewwo2,
Could You Please Check Your Device ? Without Connecting The Cable , That Your Device Automatically Switched Off In Few Seconds Or Not. Please Let Me Know So I Can Figure Out Or Take A Clue For Fixation.
Secondly I Have Windows 8 And Drivers Are Properly Installed. If The Drivers Have Issue The Adb Command Doesn't Work And Doesn't Shows My Mobile (Note That I am Taking About When Mobile Isn't on Bootloader Mode)
Thanks In Advance...
Can you type another adb command like 'fastboot oem device-info' and see the output.
it's not a problem.
Mi a2 lite turns off automatically from fastboot when it doesnt detect any fastboot signal.
You can go to device manager and then see if mi a2 lite gets recognized as a device, now go to cmd and type fastboot devices and boot to fastboot again, now it shouldn't power off again.
minicm94123 said:
it's not a problem.
Mi a2 lite turns off automatically from fastboot when it doesnt detect any fastboot signal.
You can go to device manager and then see if mi a2 lite gets recognized as a device, now go to cmd and type fastboot devices and boot to fastboot again, now it shouldn't power off again.
Click to expand...
Click to collapse
Thankyou For Your Support. I Will Check & Respond Accordingly.

ASUS Zenfone 3 Deluxe Bootloop

Hi there !
I am writing to you today because I am trying to rescue an ASUS Zenfone 3 Deluxe that is stuck in Fastboot mode.
I am unable to enter recovery mode with the key combination POWER + VOL DOWN (bootloop)
I specify that the USB Debug mode is not activated...
Do you have a solution to recover the data present on it?
I have already tried with fastboot but impossible because it tells me that the phone is locked
ADB doesn't even recognize the model...
I'm listening to you !
Thanks
Same as above. Cannot enable USB debugging because the phone is in a BOOT LOOP.
Only Fastboot is available, down button has no effect.
Phone bootloader is locked and 'FASTBOOT OEM UNLOCK' produces an error.

Categories

Resources