Related
Hello, friends.
Can you test something on your devices?
I am sure that using "adb reboot oem-2" or "adb reboot emergency" you can put phone into qdload mode (05c6:9008).
But I examined source code and I see that you can do "adb reboot oem-3" or "adb reboot diag" and put your phone into qualcomm diagnostic mode (05c6:9006) and this appear on PC as "Qualcomm MMC Storage". This is exactly that I want to do with my bricked Kindle Fire HDX (thor). At this moment I can boot only in 9008. Assuming similar architecture, if I right and you can put device straight to "diag" we could generate original partition.xml to continue my debricking work. btw if it is works you , guys, can root fire phone with any firmware with dd'ing prerooted system.
Exit from diagmode exec by loooooong pressing power button.
Thank you.
Please do not do anything if you're not power user!!!
Do not format any drives - you can hardbrick your device if it works! Just check!
Thanks, will try it tomorrow!
with "adb reboot oem-3"
it boots to bootmode 1
like normal fasboot
no flashing
FAILED (remote: boot not allowed for locked hw)
same for reboot diag
with "adb reboot oem-2"
i get Qualcomm HS-USB QDLoader 9008
But no access with fastboot trying
fastboot -i 0x1949 boot boot.img
edit
adb oem-2 puts it in download mode
playing around with Qualcom QPST tells me
phone in dowload mode
That is just an analogue "adb reboot bootloader"?
Very strange. Too bad. Ok, thanks anyway. I think the topic can be closed.
adb oem-2
Gives me qcom download mode not fastboot mode.
Screen is compled black and device is Detected as
Qualcomm HS-USB QDLoader 9008
I see. I know this mode very good. But at this moment it totally useless. I thought that oem-3 might help, I hoped that this will turn device into qualcomm diagnostic.
Though get a such gift from Amazon would be too unbelievable )
I've bricked my Fire Phone, now it's only going to Qualcomm 9008 EDL Mode.
I need a QCN Backup from a working Fire Phone now
How can I make full dump (.qcn) from a working Fire Phone ?
adb reboot oem-2
Boots into Qualcomm HS-USB QDLoader 9008 mode
Backup in QFIL not available
QPST -> Phone state: Download
QPST Software Download -> Backup -> Port does not contain a Phone Diagnostics Mode
adb reboot oem-3
Boots into an Amazon Bootloader [Fastboot]
recognized as Lenovo ADB Device in Device Manager
Hello, today i was flashing a rom and the pc hangs.
Now i can't get in download mode, the only mode i have is pressing the VolumeUP key and i get Qualcom HS-USB QDLoader 9008 (com10) hardware device
How can i fix this so i can flash a .kdz?
turned the device off and now stuck in Qualcomm HS-USB QDLoader 9008... any suggestions
AnierinB said:
turned the device off and now stuck in Qualcomm HS-USB QDLoader 9008... any suggestions
Click to expand...
Click to collapse
See if there's a fastboot/adb is active. If fastboot is, flash the latest factory image.
If adb is reboot into fastboot (if possible) and then flash the factory image.
Left it be for a day and half...then plugged it and held the power button for a few second and walla it came back to life. So unusual.. I already set up my refund with amazon for it... It may be faulty but I may just keep it tbh.
Thread closed at OP's request.
The Flash
Forum Moderator
Lenovo Vibe P1 not power on when press power buttion show green light on notification and connect to pc show HS-USB Diagnostics 9006 mode.
try to flash qfil and other tools but fail to go in download mode. try all volume keys up and down but not go in download mode.
sharrymz said:
Lenovo Vibe P1 not power on when press power buttion show green light on notification and connect to pc show HS-USB Diagnostics 9006 mode.
try to flash qfil and other tools but fail to go in download mode. try all volume keys up and down but not go in download mode.
Click to expand...
Click to collapse
Download mini partition tool and delete all partition on phone, then format all as ext4 primary
its read only partitions problem is 9006 diagnostic mode to 9008 download mode.
My phone is Lenovo Vibe P1 (c72) No display only blue light and when connect to pc 9006 mode try all keys no recovery no display no vibrate.
my recovery menu is not working. I stuck in quallcomm hs-usb diagnostics 9006 mode and cannot go the hs-usb qdloader 9008 option
* Press vol + and put USB cable: cannot go hs-usb qdloader 9008 mode
* Press vol + and vol - and power -> cannot go diagnostics menu
* When plug in usb, push power button -> cannot go hs-usb qdloader 9008 mode
I try all combinations but I cannot go to the hs-usb qdloader 9008 mode. Is there any possibility to recover phone on hs-usb diagnostics 9006 mode?
sharrymz said:
its read only partitions problem is 9006 diagnostic mode to 9008 download mode.
My phone is Lenovo Vibe P1 (c72) No display only blue light and when connect to pc 9006 mode try all keys no recovery no display no vibrate.
my recovery menu is not working. I stuck in quallcomm hs-usb diagnostics 9006 mode and cannot go the hs-usb qdloader 9008 option
* Press vol + and put USB cable: cannot go hs-usb qdloader 9008 mode
* Press vol + and vol - and power -> cannot go diagnostics menu
* When plug in usb, push power button -> cannot go hs-usb qdloader 9008 mode
I try all combinations but I cannot go to the hs-usb qdloader 9008 mode. Is there any possibility to recover phone on hs-usb diagnostics 9006 mode?
Click to expand...
Click to collapse
Write me a pm
help me please.........same problem but device is different......
same problem with me bro my lyf wind 1 is also in same mode I also did the same thing I think you can solve my problem please consider my issue........
I belive that this issue doesn't depend on the device model and it depends on the processor.....my processor is QUALCOMM snapdragon 410 with 1200 MHz clocking speed....
thanks in advance
bhsrgavkumar said:
same problem with me bro my lyf wind 1 is also in same mode I also did the same thing I think you can solve my problem please consider my issue........
I belive that this issue doesn't depend on the device model and it depends on the processor.....my processor is QUALCOMM snapdragon 410 with 1200 MHz clocking speed....
thanks in advance
Click to expand...
Click to collapse
download minipartition tool, and delete all partition, then go and format all to primary ext4 without any label.
sure sir i'll try it if i have any queries i'll ask you,thanks for your valuable time
bro,YOU ARE THE BEST,JUST BECAUSE OF YOU I AM ABLE TO GET MY MOBILE BACK TO LIFE...........LOVE YOU
Starchm said:
download minipartition tool, and delete all partition, then go and format all to primary ext4 without any label.
Click to expand...
Click to collapse
I format it as ext4. But I can't load the rum. Com 3 sees the device on port 9008. No display and charge indicator. Qfil is failing. Can you help?
Device: Lenovo P1A42 s288
My global version oneplus 7t is either locked in a fastboot loop or enters the qualcomm crashdump mode. This happened after I flashed magisk_patched.img and fastboot rebooted following this guide. When I try to use msm download tool 4., the device doesn't show up in the tool even though it does actually show up as Qualcomm HS-USB Diagonistics 900E (COM3). I have all drivers downloaded and i've wiped the phone already, so i'm just wondering how i might get msm download tool to work, or if there are any other solutions I can do. I can enter fastboot mode when I want but when I try booting normally it goes to the unlocked bootloader mode and then to the qualcomm crashdump mode.
a unneccessarily longname said:
My global version oneplus 7t is either locked in a fastboot loop or enters the qualcomm crashdump mode. This happened after I flashed magisk_patched.img and fastboot rebooted following this guide. When I try to use msm download tool 4., the device doesn't show up in the tool even though it does actually show up as Qualcomm HS-USB Diagonistics 900E (COM3). I have all drivers downloaded and i've wiped the phone already, so i'm just wondering how i might get msm download tool to work, or if there are any other solutions I can do. I can enter fastboot mode when I want but when I try booting normally it goes to the unlocked bootloader mode and then to the qualcomm crashdump mode.
Click to expand...
Click to collapse
It just says “connected" and then u click start to initiate the flash. U have to be completely off and hold down vol+ and vol- and then plug in usbc to usba cable into phone to enter "edl" mode. U can also try "fastboot reboot edl" while connected in fastboot mode to enter "edl" without using buttons (also msmtool must be specific for TMobile or superboy's patched msmtool and already running in admin mode before cable connection)