Hello!
I have a Samsung Tab 3 10.1 (GT-P5210), that is fully stock nothing happened. When trying to boot it up or put it into recovery mode - nothing happends. I can't get the Samsung logo to appear or anything. At first I thought the LCD was broke but when I put it in download mode the screen shows me everything going on.
I can't charge battery - input power: 5.1-5.2V and 0.00A.
So I can only put in download mode.
I tried reconnect battery cable, but without any effect.
What's wrong?
I,having same thing, i kept pushing button combos and plugging it in until it just starts charging. Took a few times. Get it to 100%full before you flash amything on tis device
*****FIXED*****
I attempted to revive a bricked device on boot loop using download mode and ODIN.
Later an error occurred and my table was brought to ''firmware upgrade encountered an issue" screen.
I am unable to use Kies because it cannot detect my device as I cant boot into download mode , as soon as I power on, I am taken to the same screen.
*short: I can't get PC to recognise device and cannot enter download mode.(I have installed drives)
Is there any solution to this?
Thank you!
EDIT: I just found out about USB jigs, will any jig work with my device or do I need a certain compatible one (Can't seem to find anything)
Hi Guys,
I have a problem with this device about years ago. As I'm playing Vainglory, my tab turned off instantly then after trying to turning it on again, nothing happens, I thought it just ran out of battery. I tried to charge it but only the charging battery icon shows up but it doesn't charge even if i left it overnight. I tried to access it's recovery mode but it bootloops only. BUT I can access the download mode easily but If I try to connect it to PC then boot it in download mode. It just die and bootloop. I know that only the download mode can help me on this. I just can't simply use odin/kies cause my device doesnt connect to PC. Tried to use different cables/Reseatting the battery but nothing happens.. Also, it only boots/respond when connected to a charger. Is this soft bricked?Please help... Thank You.
Hello,
I have a problem with my phone : Samsung J6+ (SM-J610FN/DS)
I have crached a flashing Rom with Odin and I'm sure it is because of that my phone can't start by pressing the power button.
Now my phone has the message : An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software ...
The thing is that it is rebooting and looping without end every 2 seconds on that green screen with that message ...
Only thing I can do is, with the USB cable connected, when the green screen is up, I can push VOL down + VOL up and I can go in download mode.... Then I can push on VOL up but right after the phone reboot in loop again and again ...
Another thing is that without USB cable connected I can't start the phone.
What can I do ?
First thing, I can't start my phone if it's not connected with the USB cable.
Second thing, when I connect my phone with the USB cable, it starts automaticaly even if I didn't push the power button and it's looping and blinking and rebooting endlessly.
Also the phone don't seems to know how charging himself when USB cable connected.
Is it a Bricked samsung phone ?
If it is, how unbrick it ?
Bro, its just discharged when you flashed it
Help Please
User said:
Bro, its just discharged when you flashed it
Click to expand...
Click to collapse
I am getting same issue but each time its on charge it reboots and I can see the screen getting laggier ! And its 3 hour in charge and It still persisits. So should I charge it overnight while its still in boot loop?
---------- Post added at 06:40 PM ---------- Previous post was at 06:35 PM ----------
iddik said:
Hello,
I have a problem with my phone : Samsung J6+ (SM-J610FN/DS)
I have crached a flashing Rom with Odin and I'm sure it is because of that my phone can't start by pressing the power button.
Now my phone has the message : An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software ...
The thing is that it is rebooting and looping without end every 2 seconds on that green screen with that message ...
Only thing I can do is, with the USB cable connected, when the green screen is up, I can push VOL down + VOL up and I can go in download mode.... Then I can push on VOL up but right after the phone reboot in loop again and again ...
Another thing is that without USB cable connected I can't start the phone.
What can I do ?
First thing, I can't start my phone if it's not connected with the USB cable.
Second thing, when I connect my phone with the USB cable, it starts automaticaly even if I didn't push the power button and it's looping and blinking and rebooting endlessly.
Also the phone don't seems to know how charging himself when USB cable connected.
Is it a Bricked samsung phone ?
If it is, how unbrick it ?
Click to expand...
Click to collapse
Did you fix the issue? please Help me if you did. I am getting same issue right now on my moms fone same brand j610f please do help.
Hello, I got the same problem. This happen because the battery is empty and the only way to charge again is open the phone and extract the battery to charged it with a external power supply
I recently tried to install a custom ROM in my samsung j6+ but halfway through it my PC turned off.
Then the problem starts i decided to reboot my phone but it shows this error "No command" " #Reboot recovery cause is [[check_bootmode]RebootRecoveryWithKey]#
Block-based OTA
Supported API: 3
# MANUAL MODE v1.0.0#
E:Failed to mount / cache: Invalid argument
The error message keeps appearing for just a fraction of a second then disappear and appear again
I tried to go to recovery mode but no luck i cant get to it
I drained the battery to turn off the device then go download mode but after get to it, it also keep restarting
help me please. thank you
iddik said:
Hello,
I have a problem with my phone : Samsung J6+ (SM-J610FN/DS)
I have crached a flashing Rom with Odin and I'm sure it is because of that my phone can't start by pressing the power button.
Now my phone has the message : An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software ...
The thing is that it is rebooting and looping without end every 2 seconds on that green screen with that message ...
Only thing I can do is, with the USB cable connected, when the green screen is up, I can push VOL down + VOL up and I can go in download mode.... Then I can push on VOL up but right after the phone reboot in loop again and again ...
Another thing is that without USB cable connected I can't start the phone.
What can I do ?
First thing, I can't start my phone if it's not connected with the USB cable.
Second thing, when I connect my phone with the USB cable, it starts automaticaly even if I didn't push the power button and it's looping and blinking and rebooting endlessly.
Also the phone don't seems to know how charging himself when USB cable connected.
Is it a Bricked samsung phone ?
If it is, how unbrick it ?
Click to expand...
Click to collapse
Have you got the issue fixed on you phone?
Since you can reach download mode - why not doing a clean flash with the correct firmware?
Hey brothers, I recently tried to bypass my FRP on my Samsung J6+ by going into download and used a PC app to bypass, but during the download I pulled out the USB cable and disrupted the download. After the disruption my phone showed the words "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software," it showed that screen until the battery died. I plugged in the charger and the same error message shows on the screen for a second and then the screen goes blank, it repeats non stop unless I remove the charger or USB cable. I cannot turn it on or off and cannot access the recovery area to factory reset.
Any pointers or tips on how to fix this?