Develop Bugs

Help I bricked my Oneplus 3

Hi, i played around with my new OP3, and i wanted to root it. Since i'm noob at rooting, it went wrong. (i did it with twrp)
So first it just went in to bootloop, then i was still able to get to rcovery and stuff, but i followed a guide to fix bootloop, and that ****ed it even more up. The guide i followedet told me to use "OnePlus3_Unbrick_Tool"
After using "OnePlus3_Unbrick_Tool", i now cant even go into recovery anymore, the only thing i can do is go to bootloader, but when i'm in bootloader now, it wont connect proberly, so that i can use "flash twrp", so that i can use twrp recovery.
Also when i try to boot it, it because of "OnePlus3_Unbrick_Tool" goes into something, where it says "md5 checksum failed", and then restarts and does it again and again.....
I hope it's not bricked forever, pls help ))

have you tried re-flashing the stock or twrp recovery with adb sideload command?
if not give it a shot, it might work.

bonham1988 said:
have you tried re-flashing the stock or twrp recovery adb sideload command?
Click to expand...
Click to collapse
And how do you say I do that? I have tried using the "tool all in one", where you han flash both stock and twrp, but it doesnt seem to do anything, when i press them (and the device is in bootloader)

Godeske said:
And how do you say I do that? I have tried using the "tool all in one", where you han flash both stock and twrp, but it doesnt seem to do anything, when i press them (and the device is in bootloader)
Click to expand...
Click to collapse
Just boot into bootloader mode and through command prompt check if your phone is detected by typing fastboot devices. If its detected then you flash a new recovery again. Forget the toolkit, just look for instructions on how to install a custom recovery.
Sent from my OnePlus3 using XDA Labs

bonham1988 said:
Just boot into bootloader mode and through command prompt check if your phone is detected by typing fastboot devices. If its detected then you flash a new recovery again. Forget the toolkit, just look for instructions on how to install a custom recovery.
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Okay i've tried that now, and it wont allow me unlock my bootloader from command prompt, and i cant do the flash while it's locked.. what to do?

Godeske said:
Okay i've tried that now, and it wont allow me unlock my bootloader from command prompt, and i cant do the flash while it's locked.. what to do?
Click to expand...
Click to collapse
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.

simthadim said:
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
Click to expand...
Click to collapse
When im in fastboot mode in the bootloader, i can only find it in "device manager" as "marshall london device -> marshall london bootloader interface"

Godeske said:
When im in fastboot mode in the bootloader, i can only find it in "device manager" as "marshall london device -> marshall london bootloader interface"
Click to expand...
Click to collapse
Might seem a silly question but what phone are you using? If it is a OnePlus3 have you installed the correct drivers?

ghostofcain said:
Might seem a silly question but what phone are you using? If it is a OnePlus3 have you installed the correct drivers?
Click to expand...
Click to collapse
Pretty sure i have, but i have booked a session with oneplus costumer service now, so that they do it for me live lololol

bonham1988 said:
have you tried re-flashing the stock or twrp recovery with adb sideload command?
if not give it a shot, it might work.
Click to expand...
Click to collapse
Hey bonham,
The same thing happened to me but when I try to sideload it says I need 1.0.32 or higher to sideload this device
What should I do?

gavintoronto2016 said:
Hey bonham,
The same thing happened to me but when I try to sideload it says I need 1.0.32 or higher to sideload this device
What should I do?
Click to expand...
Click to collapse
Adb version is outdated. Just download the latest ones.
Sent from my OnePlus3 using XDA Labs

Hey guys, if there are some of you, who knows a lot about this, would you like to answer this comment? Idk maybe we could use teamviewer to help me or something

simthadim said:
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
Click to expand...
Click to collapse
Ohh i think i understand your question. YEs in command prompt I am able to find the device, it is connected.
(do you know a lot about this, maybe you could teamview me to help?))

Godeske said:
Ohh i think i understand your question. YEs in command prompt I am able to find the device, it is connected.
(do you know a lot about this, maybe you could teamview me to help?))
Click to expand...
Click to collapse
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.

simthadim said:
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
Click to expand...
Click to collapse
Thank you, but i have not enabled "allow oem unlocking" in the developer settings when the phone worked, so i get a error message "FAILED (remote: oem unloc is not allowed)
What to do to unlock it then?

Bro, download 3.2.4 oos rom zip file from official link. Its around 1.3 GB. Just connect ur OP3 to computer. It will detect as MTP device.Im my computer it was in the name of RAIN Transfer the zip file to internal storage. Wipe cache. And select install option in TWRP and select the zip file u pushed and flash it. Best of luck..

jaganmohans said:
Bro, download 3.2.4 oos rom zip file from official link. Its around 1.3 GB. Just connect ur OP3 to computer. It will detect as MTP device.Im my computer it was in the name of RAIN Transfer the zip file to internal storage. Wipe cache. And select install option in TWRP and select the zip file u pushed and flash it. Best of luck..
Click to expand...
Click to collapse
Bro, if just it were that simple, but it's not.. It doesn't find the phone in my computer...

simthadim said:
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
Click to expand...
Click to collapse
Hey i have the same problem but this fix does not work for me.
So I have the bootloader unlocked and I can enter the bootload and my computer detects my device which is nice.
when I flash twrp on my phone trough CMD it doesnt work, my PC tells me that everything is okay but my phone will not boot into twrp and instead it will give me weird errors.
---------- Post added at 03:31 PM ---------- Previous post was at 02:56 PM ----------
this fix worked for me,
On the screen when the phone failed to md5 checksum, you've got several partition failed right? in red text.
- download this : https://www.androidfilehost.com/?fid=24591000424942573
and then extract.
- download platform tools attached below. extract in the same folder with first file you've downloaded.
- Boot your phone to fastboot mode, plug your usb, make sure adb and fastboot driver are installed.
- on the folder, hold shift and right click, click open command here
- type fastboot devices
- make sure your serial number appear.
- now flash the img of the missing file according to the partition in red text on your ms5 checksum failed one by one.
- e.g. "fastboot flash boot_aging boot_aging.img.
- make sure you flash all the missing partition.
- type fastboot reboot.
this will boot you to oos 3.1.2.
unfortunately I couldn't extract the newest oos dat. data. but you could always take the OTA
goodluck mate. sorry for my english

Godeske said:
Bro, if just it were that simple, but it's not.. It doesn't find the phone in my computer...
Click to expand...
Click to collapse
Hmm bad try installing all op3 drivers and see whether phone is detected or not. I was in the same situation previously. Pushing zip through adp terminal is painful process. I got device offline first,after solving that i got service not recognized issue. For solving that usb debugging needs to be enabled i stuck in that step.

can you enter recovery trough fastboot mode? I.e. if you are in fastboot mode you van use the volume keys to select recovery.
100% sure you can't enter recovery?
you can try Fast and pro's option. let us know!

How to wipe android partitons while NO access to Fastboot? PLZ help

Hi,
I have a unique problem. I cant go into fastboot. Yes, fastboot on my OPT is not a opltion.
I cant instal TWRP. I can't wipe the OS to flash a new one.
My question is this:
Is there a way to wipe the partitions on a android phone via windows or something?
This problem is created by me. Somehow I flash OOS over CM (??)
So when my phone boots (bootloader is unlocked) I will see 2 boot sequences wich prevents me from accesing the fastboot menu.
The solution I see is this: Enter TWRP --> Wipe all but USB-OTG ...
Anyway, I hope there is a android Einstein here because I'm at a loss..
Feel free to ask any questions and pls help me!
Grt TwoChill

TowChill said:
Hi,
I have a unique problem. I cant go into fastboot. Yes, fastboot on my OPT is not a opltion.
I cant instal TWRP. I can't wipe the OS to flash a new one.
My question is this:
Is there a way to wipe the partitions on a android phone via windows or something?
This problem is created by me. Somehow I flash OOS over CM (??)
So when my phone boots (bootloader is unlocked) I will see 2 boot sequences wich prevents me from accesing the fastboot menu.
The solution I see is this: Enter TWRP --> Wipe all but USB-OTG ...
Anyway, I hope there is a android Einstein here because I'm at a loss..
Feel free to ask any questions and pls help me!
Grt TwoChill
Click to expand...
Click to collapse
Here you can find a recovery guide:
https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
I'd recommend methode 2, because it seems more east to do.
Good luck!

TowChill said:
Hi,
I have a unique problem. I cant go into fastboot. Yes, fastboot on my OPT is not a opltion.
I cant instal TWRP. I can't wipe the OS to flash a new one.
My question is this:
Is there a way to wipe the partitions on a android phone via windows or something?
This problem is created by me. Somehow I flash OOS over CM (??)
So when my phone boots (bootloader is unlocked) I will see 2 boot sequences wich prevents me from accesing the fastboot menu.
The solution I see is this: Enter TWRP --> Wipe all but USB-OTG ...
Anyway, I hope there is a android Einstein here because I'm at a loss..
Feel free to ask any questions and pls help me!
Grt TwoChill
Click to expand...
Click to collapse
If you are getting two boot screens, please confirm if this is what you see in your first boot screen:
some text which goes like "Your device cannot be trusted etc etc. fastboot oem lock something something"
If yes, press the volume buttons at this screen, which will take you to an "Options menu"
This will have options to power off, restart, recovery, fastboot, back to previous page.
use volume down buttons to move selection to fastboot and press power button to select fastboot.
This will take you to bootloader.
Alternatively:
Is the device getting identified by your computer when connected?
If yes, and if you have adb tools installed, try this command, after connecting to computer and selecting usb configuration as transfer files
adb devices
The result of this should show your device
then type:
adb reboot bootloader
This should take you to your bootloader screen.

pvramk said:
If you are getting two boot screens, please confirm if this is what you see in your first boot screen:
some text which goes like "Your device cannot be trusted etc etc. fastboot oem lock something something"
If yes, press the volume buttons at this screen, which will take you to an "Options menu"
This will have options to power off, restart, recovery, fastboot, back to previous page.
use volume down buttons to move selection to fastboot and press power button to select fastboot.
This will take you to bootloader.
Alternatively:
Is the device getting identified by your computer when connected?
If yes, and if you have adb tools installed, try this command, after connecting to computer and selecting usb configuration as transfer files
adb devices
The result of this should show your device
then type:
adb reboot bootloader
This should take you to your bootloader screen.
Click to expand...
Click to collapse
Thank you for your replay.
I have done all of this and i do understand how this works.
I have adb drivers installed, my computer does reconizes my phone and everything works even the reboot to bootloader via CMD. (adb devices, it shows, etc)
When my phone then tries to access the bootloader, it will show those messeges " this devices cant be trusted etc etc." afther 5 seconds again I see the the android logo (with a few lines of static on the bottom) (( that clearly is not right )) but it will show me again the same message " this devices cant be trusted etc etc" ... then it will just show me the battery icon and power precentage (this if I choose to boot to bootloader) or else it starts normally..
Clearly the flashing of CM failed. And with a sideload to install OxygenOS I can use it.. But it does prevents me from accessing the fastboot mode..
So Is there an alternative way to install TWRP without using the fastboot mode? Or is there an other way i can try to wipe the partitions inc. the os?
From there I know what to do.

TowChill said:
Thank you for your replay.
I have done all of this and i do understand how this works.
............
So Is there an alternative way to install TWRP without using the fastboot mode? Or is there an other way i can try to wipe the partitions inc. the os?
From there I know what to do.
Click to expand...
Click to collapse
well if you are rooted you can try using an app called flashify or flashfire to install twrp

pvramk said:
well if you are rooted you can try using an app called flashify or flashfire to install twrp
Click to expand...
Click to collapse
Thanks! Unfortunatly my phone isn't rooted anymore ..
I'm screwed right?

TowChill said:
Thanks! Unfortunatly my phone isn't rooted anymore ..
I'm screwed right?
Click to expand...
Click to collapse
When the display shows the battery % check if fastboot devices shows your device?
If not I'm sorry, I would not be of any more help to you my friend.
Hope someone more knowledgeable comes along and clears your problem....

TowChill said:
Thank you for your replay.
I have done all of this and i do understand how this works.
I have adb drivers installed, my computer does reconizes my phone and everything works even the reboot to bootloader via CMD. (adb devices, it shows, etc)
When my phone then tries to access the bootloader, it will show those messeges " this devices cant be trusted etc etc." afther 5 seconds again I see the the android logo (with a few lines of static on the bottom) (( that clearly is not right )) but it will show me again the same message " this devices cant be trusted etc etc" ... then it will just show me the battery icon and power precentage (this if I choose to boot to bootloader) or else it starts normally..
Clearly the flashing of CM failed. And with a sideload to install OxygenOS I can use it.. But it does prevents me from accessing the fastboot mode..
So Is there an alternative way to install TWRP without using the fastboot mode? Or is there an other way i can try to wipe the partitions inc. the os?
From there I know what to do.
Click to expand...
Click to collapse
If nothing works, try method 2 from the Hard Brick guide from Naman Bhalla.

Oneplus 3 Boot Loop

So I tried to flash another rom by flashing TWRP and unlocking the bootloader, which worked and I then had installed Freedom Os. Then I locked the Bootloader to get the Message away, but know when you charge it or turn it on it is in an boot loop which repeats the Oneplus Logo what you normally see, but very short and after that it bobrates turns the screen off and it atart again. Or I can go into fastboot mode, but when I try to go into the recovery, it goes into the Boot Loop again. Is there a way to get the Original OS back? Ive already dopwnloaded it but I cant get in on there. Can you tell me how to fix it on my own?

[GUIDE] Mega Unbrick Guide for A Hard Bricked OnePlus 3 > METHOD 1

If you can access fastboot mode, connect the phone to a PC, then go to ADB and erase recovery using the command " fastboot erase recovery" and install TWRP 3.0.4-1 using the command " <fastboot flash recovery <recovery.zip/img> again.
Once you do that, boot into TWRP, go to wipe and wipe everything. Once you do that, transfer the stock OOS into the internal memory using copy-paste , then go to install , select the transferred file to install the OS or else go to advance setting in TWRP and select adb sideload and use the command "adb sideload <filename.zip>".
This should install the OS on the phone.
If you want to go complete stock, then you also need to install the stock recovery. Search the forum to get the relevent files or else you can download it from the OnePlus website and later on update to latest OS via OTA.
NEVER EVER LOCK THE BOOTLOADER , IF YOU'RE USING ANY ROM OTHER THAN STOCK OS AND STOCK RECOVERY

anup807 said:
If you can access fastboot mode, connect the phone to a PC, then go to ADB and erase recovery using the command " fastboot erase recovery" and install TWRP 3.0.4-1 using the command " <fastboot flash recovery <recovery.zip/img> again.
Once you do that, boot into TWRP, go to wipe and wipe everything. Once you do that, transfer the stock OOS into the internal memory using copy-paste , then go to install , select the transferred file to install the OS or else go to advance setting in TWRP and select adb sideload and use the command "adb sideload <filename.zip>".
This should install the OS on the phone.
If you want to go complete stock, then you also need to install the stock recovery. Search the forum to get the relevent files or else you can download it from the OnePlus website and later on update to latest OS via OTA.
NEVER EVER LOCK THE BOOTLOADER , IF YOU'RE USING ANY ROM OTHER THAN STOCK OS AND STOCK RECOVERY
Click to expand...
Click to collapse
Can you tell me how to go to adb? When doing it while being in fastboot I get the error "remote: Partition erase is not allowed"

revedar said:
Can you tell me how to go to adb? When doing it while being in fastboot I get the error "remote: Partition erase is not allowed"
Click to expand...
Click to collapse
Download Universal ADB software, download the latest version and install it.
TWRP 3.0.4-1
Official Oxygen OS 4.0.3
Official Recovery
Connect your phone to the PC and then navigate to installed folder, right click holding SHIFT key and select "Open command window here"
Inside command window type
adb devices
If all the drivers are installed properly, you should see you're device ID here.
then type
adb reboot bootloader
your phone will enter fastboot mode.
then type
fastboot devices
again you should see you're device ID here.
then follow the instruction , i've given earlier.

anup807 said:
Download Universal ADB software, download the latest version and install it.
TWRP 3.0.4-1
Official Oxygen OS 4.0.3
Official Recovery
Connect your phone to the PC and then navigate to installed folder, right click holding SHIFT key and select "Open command window here"
Inside command window type
adb devices
If all the drivers are installed properly, you should see you're device ID here.
then type
adb reboot bootloader
your phone will enter fastboot mode.
then type
fastboot devices
again you should see you're device ID here.
then follow the instruction , i've given earlier.
Click to expand...
Click to collapse
So i've downloaded the software, installed the driver and typed in cmd adb devices "adb devices List of devices attached" is returned, so it seems like there is going something wrong. Is it because the Driver is installed wrong or because "target reported max download size of 440401920 bytes
sending 'recovery' (22605 KB)...
OKAY [ 0.528s]
writing 'recovery'...
FAILED (remote: Partition flashing is not allowed)
finished. total time: 0.551s"
This is returned when trying to flash. Do I have to be in fastboot mode or something else to be able to follow your instructions? In Fast Boot is written that the Device State is locked and Secure Boot is enabled. I messaged Oneplus and hope they have a solution which can just unlock the Bootloader when being in fastboot mode, so everything is fine again. I hope you can help me, but I still wanna say thank your for now

Errr... fastboot can unlock the bootloader. fastboot oem unlock

emuandco said:
Errr... fastboot can unlock the bootloader. fastboot oem unlock
Click to expand...
Click to collapse
Thank you, but it dont works because i forgot to re-enable the oem modification and usb debugging in freedom os, maybe there is an option to do this without having this enabled but I didnt found it. So I wait for a helpful answer from somebody here or from Oneplus, I consider sending my smartphone to oneplus to let them repair it if I cant do it. Just saying that modding an S3, Asus transformer pad and nvidia shield is way easier.

never ever relock your bootloader while you in custom OS

oopstairs said:
never ever relock your bootloader while you in custom OS
Click to expand...
Click to collapse
Thank you for not helping me

revedar said:
Thank you for not helping me
Click to expand...
Click to collapse
Yeah I'm sorry I can't help you in your case. I'm just stating the fact. Sorry if I offended you.

Shouldn't it still be possible to reflash the properly signed official updates? TBH I never had such a problem and thus never had to cope with it. Same with recovery: http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img Try flashing this one with fastboot. It's the official one. By flashing this one you might fix your stuff over adb sideloading the official full update zips.

Try the unbrick guide provided in the 2nd post to your query. It should definitely help. Better contact OnePlus tech2 support and they'll flash your phone for you. They're really helpful.

emuandco said:
Shouldn't it still be possible to reflash the properly signed official updates? TBH I never had such a problem and thus never had to cope with it. Same with recovery: http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img Try flashing this one with fastboot. It's the official one. By flashing this one you might fix your stuff over adb sideloading the official full update zips.
Click to expand...
Click to collapse
I already tried to do this, but the console returns something like permission denied.

anup807 said:
Try the unbrick guide provided in the 2nd post to your query. It should definitely help. Better contact OnePlus tech2 support and they'll flash your phone for you. They're really helpful.
Click to expand...
Click to collapse
The MSM Software disconnects the smartphone while the process works

U cannot flash in adb while the bootloader is locked, u can not unlock the bootloader unless u can access ur OS, I am not sure y people was trying to get u to flash via fastboot the answer was provided to u in the 2nd post

^^^ This!
It's pretty much obvious fastboot flash will not work with a locked bootloader.
It's pretty obvious unlocking the bootloader will not work, while one can not access the OS.
Unbrick tool is the only option to bring it back to life, or sending it for RMA. If unbrick tool fails, try using different drivers and make sure it is connected with the stock cable (I've only tried with a Nilkin cable besides the stock one, which always failed at different stages during the process).
Not even sure drivers must be installed manually, I've never done that myself on Windows 10, as they were automatically installed (3 different's PC's, both on x86 and x64).

Which version of stock firmware did you last have? If it was 4.0.1 or earlier, then you can use
Code:
fastboot oem 4F500301
to issue a flash command even without unlocking the bootloader. If you are on that, then use that command and flash stock recovery and then flash stock zip.

rk2612 said:
Which version of stock firmware did you last have? If it was 4.0.1 or earlier, then you can use
Code:
fastboot oem 4F500301
to issue a flash command even without unlocking the bootloader. If you are on that, then use that command and flash stock recovery and then flash stock zip.
Click to expand...
Click to collapse
I had the most recent update installed. Is there a similar command at the moment?

revedar said:
I had the most recent update installed. Is there a similar command at the moment?
Click to expand...
Click to collapse
Don't think so.

Safe Delete System (without Screen/broken)

Hi,
i broke my screen complete. All i see are artifacts.
I have TWRP, system start but all i can use is the CLI. How can i delete my phone complete and safe? Is it safe via "find my phone" from Google Website or is there any other command to do this? Is the any Java-All-in-Onetools i can use?
Regards and thanks

if you have twrp installed i assume your bootloader is unlocked, turn on your phone and use volume buttons to boot into fastboot, connect your phone to pc, fire up fastboot/adb type in fastboot format userdata

ach3fck said:
if you have twrp installed i assume your bootloader is unlocked, turn on your phone and use volume buttons to boot into fastboot, connect your phone to pc, fire up fastboot/adb type in fastboot format userdata
Click to expand...
Click to collapse
OK. Sound like a plan.
What if i use the tool seen in the screenshot? There is a point to decrypt and format. Yes, i will search myself - how can i encrypt it again?

Recovering data on a DEAD Redmi Note 8 PRO

Hello,
I hope this is the right section for this post.
I've been using a Note 8 Pro with zero issues until one week ago when I accidentally dropped the phone in the water.
After a few seconds submerged the display turned off and I felt an intense heat coming from the zone of the battery.
Having no chance to recover the phone (tried with Isopropyl Alcohol too) I decided to open it and manually dry/clean each component, having seen the situation inside gave me the phone is dead but I still want to recover some pictures/data from it.
Before opening the open Minitool was not detecting any device on my Windows Laptop, after cleaning each component Minitool is instead detecting the phone via USB, but I still can't extract any data because the "Usb debugging" option is not tuned on (and no the device is not rooted).
Is there any option to extract data from the phone? There's a way to turn on USB Debugging via ADB on a non-rooted phone?
Thanks,
Andrea.

how about trying your luck with a service ? most of the time they do have access to special programs, which have a better functionality than adb.

Thanks for the hint, but I am not happy with the idea of someone playing with my data

1. Try reboot phone to recovery
2. Connect it to your computer (download Platform-tools)
3. In the folder with Platform-tools open cmd
4. In cmd - adb shell
5. cd storage/emulated/0
6. ls
7. Now, using the commands, drag files from your phone to your PC

Thanks for your hint.
No luck so far, I think because the phone is not in recovery mode.
I can hear the phone starting up several times (hear the jingle) so I think it's in a reboot loop and I don't know how to boot it into recovery mode wo a working display (tried with power/volume up combination with no luck).
From the windows taskbar I can see that the phone is recognized for a few seconds before it restarts.
EDIT: trying to switch the phone on with the combination "power/volume down" brings to a kind of stable state and I can now see the phone in the windows taskbar recognized as a generic "android device". Still no luck when trying to access the phone as there's no device in windows and no device obtained through "adb devices" command.
EDIT1: I think that the phone is in "FASTBOOT" mode. If I type "fastboot devices" I can see it detected but still can't access it.

Any idea? Should I give up?

If it's popping up and down you need something to keep track.
You can try my UsbLog.exe (in the sig), it just sits there and shows what devices appear (if they have a driver) and disappear.
Try these to see if anything is working:
Code:
C:\>fastboot devices
C:\>fastboot getvar all
C:\>fastboot oem device-info

Yes it's popping up and down when it's booted in recovery mode whilst is stably connected when in fastboot mode but in this case I can't access the internal memory of the device.
I didn't get the purpose of logging the devices connecting to the USB as I can see the device connected for a while and correctly recognized as Redmi Note 8 pro but as it keeps popping out windows have no time to show it's folder.
As for the code you wrote: i will try asap but already tried with "fastboot devices" and I get the phone correctly listed but still can't access its memory as told.

Renate said:
If it's popping up and down you need something to keep track.
You can try my UsbLog.exe (in the sig), it just sits there and shows what devices appear (if they have a driver) and disappear.
Try these to see if anything is working:
Code:
C:\>fastboot devices
C:\>fastboot getvar all
C:\>fastboot oem device-info
Click to expand...
Click to collapse
After rebooting the phone in fastboot mode I can see it recognized as a generic android device from windows (still can't access the storage folder of the device).
fastboot devices----> I get the device listed with a series of numbers/letters
fastboot getvar all---> I get a list of information on token/token version/partition type and size/baseband/bootloader etc.
fastboot oem device-info----> FAILED (remote: unknown command)
So I think it's clear that the device is in Fastboot mode and instead is in a boot loop when started in revocery mode.
Is there a way to extract data from fastboot mode?
Thanks,
Andrea.

If you put a custom recovery on it in the first place you can try reflashing recovery from fastboot.
Fastboot doesn't allow you to read anything.
oem device-info is obviously an oem command that might not be on any device.
You've got a Mediatek processor. That has some low level equivalent to Qualcomm EDL, but I have no experience with that.
If you can get there you can download the user data partition, but it's probably encrypted. Also no experience with that.
The easiest is if you can get the system to mount/decrypt the partition.
You've tried the normal system too?
Is this A/B? Have you tried changing slots?
How much time does it stay up in recovery? Do you have ADB? Maybe try:
Code:
# stop recovery
Does that prevent it from looping?

So I should try to flash a custom recovery like TWRP for example?
What you mean with "normal system too"?
Changing slots you mean changing usb port?
It stays in recovery less than one second so I can't give any command via ADB.
EDIT: cant' flash any custom recovery because the bootloader is locked.
If I Try to unlock the bootloader via MiUnlock I get a warning saying that all data will be erased.
Any idea on how to unlock the bootloader wo wiping all the data?

Sephiroth79 said:
So I should try to flash a custom recovery like TWRP for example?
What you mean with "normal system too"?
Changing slots you mean changing usb port?
It stays in recovery less than one second so I can't give any command via ADB.
EDIT: cant' flash any custom recovery because the bootloader is locked.
If I Try to unlock the bootloader via MiUnlock I get a warning saying that all data will be erased.
Any idea on how to unlock the bootloader wo wiping all the data?
Click to expand...
Click to collapse
There is a mediatek bootloader unlocked you just have to boot in Brom mode and it'll unlock it please follow this
PS: press all buttons

MysticNoOb said:
There is a mediatek bootloader unlocked you just have to boot in Brom mode and it'll unlock it please follow this
PS: press all buttons
Click to expand...
Click to collapse
My bootloader is unlocked!
Thank you very much.
Now I am going to try to flash a custom recovery mode via fastboot in order to access the internal memory of the phone.
EDIT: I've just flashed twrp-3.6.2_9-0-begonia.img but still can't boot into recovery mode.
Any hint on how to extract data from the system now?

You really want to boot the normal system because that's the best way to get decrypted data.
I realized that you don't have ADB enabled there.
You should look at B. Kerler's https://github.com/bkerler/mtkclient/
If you can pull the boot image off your device then I might be able to fix it so that you have ADB.
You'd have to flash it back in fastboot or mtkclient.
You can also pull a copy of userdata off the device with mtkclient.
As far as booting into recovery, there's a way.
Here's how, if you don't have A/B (that is you flashed TWRP into recovery and not recovery_a or recovery_b)
then you can fastboot flash a special file into the misc partition and it wil boot into recovery next reboot.
To return things to normal you have to flash the empty file to the misc partition.
Code:
C:\>fastboot flash misc misc-rec.img
C:\>fastboot reboot
Only do this if you don't have partitions that end in _a or _b

I really don't know if I have partitions A and B as you mentioned and I think there's no way to check actually.
I confirm I don't have "USB Debugging" active on the phone.
So if I understand correctly I should do the following:
- Flash misc-reg.img via Fastboot
- Boot into recovery just rebooting the system after flashing the above file;
- use MTKclient to dump userdata or boot image to enable ADB on (I will need help with mtkclient I suppose).
Is it correct?
EDIT: flashed TWRP first and misc-rec then rebooted via Fastboot/Reboot but nothing happens.

Sephiroth79 said:
My bootloader is unlocked!
Thank you very much.
Now I am going to try to flash a custom recovery mode via fastboot in order to access the internal memory of the phone.
EDIT: I've just flashed twrp-3.6.2_9-0-begonia.img but still can't boot into recovery mode.
Any hint on how to extract data from the system now?
Click to expand...
Click to collapse
TWRP cant boot because you used wrong one. Search again in that unlock bootloader channel and use suitable one.

Kirasu2080 said:
TWRP cant boot because you used wrong one. Search again in that unlock bootloader channel and use suitable one.
Click to expand...
Click to collapse
Hmmm, I am almost sure that the TWRP I've flashed was listed under Redmi Note 8 pro page. Can you please indicate more precisely where should I sera
EDIT: I think I've downloaded and flashed the correct TWRP file.
@Renate can you please detail your method so I can try to extract data from the phone?

Sephiroth79 said:
Hmmm, I am almost sure that the TWRP I've flashed was listed under Redmi Note 8 pro page. Can you please indicate more precisely where should I sera
EDIT: I think I've downloaded and flashed the correct TWRP file.
@Renate can you please detail your method so I can try to extract data from the phone?
Click to expand...
Click to collapse
1/Yeah it's official. You "flashed correct TWRP." Downgrade to Miui Android 9 (_9 in it's name) to boot into that TWRP and lose your data.
2/In unlock bootloader video above, search other video in his channel playlist and find TWRP video suitable for your Miui version.

Kirasu2080 said:
1/Yeah it's official. You "flashed correct TWRP." Downgrade to Miui Android 9 (_9 in it's name) to boot into that TWRP and lose your data.
2/In unlock bootloader video above, search other video in his channel playlist and find TWRP video suitable for your Miui version.
Click to expand...
Click to collapse
Can't find the right video, can you kindly send me a link (I am on the latest Miui version and I am in Europe)?
In all the videos I've seen on his page he is using the device to install TWRP etc.
I think I just need the correct TWRP version for my MIUI release and then I'll flash TWRP and misc-reg.img. Is it right?

Sephiroth79 said:
Can't find the right video, can you kindly send me a link (I am on the latest Miui version and I am in Europe)?
In all the videos I've seen on his page he is using the device to install TWRP etc.
I think I just need the correct TWRP version for my MIUI release and then I'll flash TWRP and misc-reg.img. Is it right?
Click to expand...
Click to collapse
Use brp 3.5.2 v3.1 or V3.6 to decrypt Miui 12.5