Related
Hi.
I have a rooted s-off desire using alpha rev 1.8.
I'm currently trying to resize the nand partitions using the method on the alpharev.nl site, without a pc. I'm running cm6.1 rom, so I downloaded the n1table zip ready to flash. Its renamed to pb99img.zip on root of sdcard. I've reboot into hboot using volume+down and I'm not quite sure where to go from here. I tried going into recovery and installing zip from SD but it doesnt seem to have worked as when I reboot into rom and check SD storage, it remains the same as before.
I know I must be missing something basic. Anyone know what I'm doing wrong? Cheers.
Sent from my HTC Desire using XDA App
Do NOT continue with what you're doing. Have you even read the instructions on the AlphaRev site? You flash a new MTD table using the fastboot commands of adb:
1) Nandroid backup in recovery.
2) Verify the MD5SUM of the file you downloaded against the one in the table.
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
4) 'Fastboot reboot-bootloader'
5) 'Fastboot erase cache'
6) Boot recovery, wipe everything and restore
It´s also working with HBOOT...but I think you have to rename it to PB99IMG.zip (case Sensitiv)
If you have it in your / Filesystem on your SD Card, you will be asked after booting to Bootloader if you want to update.
Answer with "Volume up" or "down"
YOU DO NOT RENAME AN ALPHAREV HBOOT MOD TO PB99IMG
That is for Zip versions of the RUUs and NOTHING to do with AlphaRev
Seriously, read up before you brick your phone
From the Aplha Rev HP:
You can also download the corresponding PB99IMG zipfile, put it on your sdcard, and rename it to PB99IMG.zip. Then start the phone in HBOOT mode (VolDown+POWER) to flash the HBOOT without a PC.
Sorry, if I don´t understand this right...but that´s a fact from his Page
I´m sure Fastboot is the better way...but I tried it like this and it worked
I stand corrected, didn't see they had that option now. My apologies
In which case, you'd download the relevent ZIP file, rename it PB99IMG.zip (not PB99IMG.zip.zip) and put it on the root of our SD card (root - not in any folders)
Then, when you boot into HBOOT it should just pick it up and ask if you want to flash it - you don't go into recovery
no Probs
I never got asked if i wanted to flash the hBOOT
I'm running a rooted HTC desire and i'm trying to load flash the hboot to the oxygen variety
I haven't s-off my phone yet but wanted to use the no PC method outlined above
When i go into hBoot the phone picks up the PB99IMG.zip (saying "checking PB99IMG.zip......") but doen't give me the option to flash the hboot
Am i missing something? Do i have to s-off it the long way first?
Any help would be really appreciated
=]
Yes, you have to S-OFF first before you can change the MTD. It does say on the website:
"If you are already S-OFF, you can get our newest patched HBOOTs from here. (without going through the entire procedure again).
Please read the entire table and pick the partition table with the correct sizes for your ROM. One easy way to switch partition tables, is to nandroid backup,
and verify that the sizes of your backup are indeed the ones listed in the table (or smaller), and restore after flashing hboot."
Any idea if i can choose the Oxygen variation when i use the AlphaRev 1.8 HBOOT reflash utility or will i need to do it again with a PB99IMG.zip after?
the.draconian said:
Any idea if i can choose the Oxygen variation when i use the AlphaRev 1.8 HBOOT reflash utility or will i need to do it again with a PB99IMG.zip after?
Click to expand...
Click to collapse
Do the Alpharev 1.8 Flash first.
Then connect your phone, boot into Fastboot mode, and run the foll:
1) Nandroid backup in recovery.
2) Verify the MD5SUM of the file you downloaded against the one in the table.
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
4) 'Fastboot reboot-bootloader'
5) 'Fastboot erase cache'
6) Boot recovery, wipe everything and restore.
Click to expand...
Click to collapse
Again a quote from their site
Edit: Alpharev seems to have taken down the Pb99img method
EddyOS said:
Do NOT continue with what you're doing. Have you even read the instructions on the AlphaRev site? You flash a new MTD table using the fastboot commands of adb:
1) Nandroid backup in recovery.
2) Verify the MD5SUM of the file you downloaded against the one in the table.
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
4) 'Fastboot reboot-bootloader'
5) 'Fastboot erase cache'
6) Boot recovery, wipe everything and restore
Click to expand...
Click to collapse
Of course I have read the instructions thoroughly. I would never do anything without reading several times over. As another member pointed out, you can in fact flash from .zip
However it would not work for me, probably a lot of others too, as another member mentioned it has been removed from site.
I have now switched to miui and am not encountering any storage space issues as yet, so I think ill leave it alone for awhile. Thanks for everyone's input and help.
Cheers.
Sent from my HTC Desire using XDA App
Anyone got this to work? Ive tried following the instructions (I have s-off and have repartitioned my HBOOT previously with ADB) and it just says no image found when I load into fastboot
When I try to do it from the SD card on mine, it finds the PB99IMG.zip file but then says "Model ID invalid. Update Fail!" then asks if I want to reboot or not. Rebooting just performs a normal reboot with no changes.
jordan.harris01 said:
When I try to do it from the SD card on mine, it finds the PB99IMG.zip file but then says "Model ID invalid. Update Fail!" then asks if I want to reboot or not. Rebooting just performs a normal reboot with no changes.
Click to expand...
Click to collapse
Obviously, you're trying to install a file meant for another device! That's a very dangerous thing to do!
It's the PB99IMG.zip for the Oxygen HBOOT. How can it be for the wrong device? I'm s-off, running Oxygen RC7.
jordan.harris01 said:
It's the PB99IMG.zip for the Oxygen HBOOT. How can it be for the wrong device? I'm s-off, running Oxygen RC7.
Click to expand...
Click to collapse
At least that's what the error code means anyway..Is there a reason why you cant fastboot flash the img?
Yea, I assumed that. I can't seem to get fastboot working again on my machine. It was working but I haven't had much time to look into what happened. ADB devices brings up the serial number but fastboot won't detect the phone. I was just trying to do this while I was at work and I don't have access to fastboot here.
jordan.harris01 said:
Yea, I assumed that. I can't seem to get fastboot working again on my machine. It was working but I haven't had much time to look into what happened. ADB devices brings up the serial number but fastboot won't detect the phone. I was just trying to do this while I was at work and I don't have access to fastboot here.
Click to expand...
Click to collapse
Adb and fastboot detect the phone at different phases. If one detects, at that point, the other wouldnt.
Are u sure you're trying out fastboot in fastboot mode (poweroff, Back key+Power On)? At that point fastboot should work..Even most severely damaged phones are detected in fastboot
Yes, the phone is in fastboot when I'm trying this. I'm wondering if something happened to the fastboot driver or something. Either way, I'll look into it at some point.
hi...
can any1 tell me how to install custom roms using pc...........
i have searched the forum....but couldnt find any answer.................
sorry for starting a new thread........
thanks in advance
General Method:
- find, download and copy a flashable rom called "fullwipe 1.3" to the sd
- copy the zip with the rom you want to load in it to your sd card
- reboot into cwm recovery
- install zip from sd card
- choose the fullwipe 1.3 zip
- install
- then choose the rom's zip
- install
- reboot
wait for it to load. there you go.
For more advanced rom's, you must make directory's on your sd card for them to work properly. Follow instructions posted by the Rom's developer for proper installation.
thanks bro..........4 all ur help..............
1 more question........
what about using it through the fone......
i mean .....after downloading through the rom manager..........should i follow the same procedure ????
question
I rooted today, s-off & eng-off, installed rom manager
what do i have to do to get clockwork to work
I try booting into recovery but, display goes blank & has a red triangle symbol & after many minutes nothing happens..... can some inform me of the step I may have missed or something i can do to verify that i have the device set up properly.
Hopefully Thanks in advance.
gixer131 said:
question
I rooted today, s-off & eng-off, installed rom manager
what do i have to do to get clockwork to work
I try booting into recovery but, display goes blank & has a red triangle symbol & after many minutes nothing happens..... can some inform me of the step I may have missed or something i can do to verify that i have the device set up properly.
Hopefully Thanks in advance.
Click to expand...
Click to collapse
Flash CWM recovery from rom manager again.
Hawks556 said:
Flash CWM recovery from rom manager again.
Click to expand...
Click to collapse
I can appreciate that, but I need to know what to do. I try to do that & i get an error while attempting to run privileged commands. Flashing sounds all great but I cant seem to get it to do anything in recovery... error issues trying to do that, or anything else, I also have super user update issues that say they put a recovery image on the sd card & to go boot that from within recovery.
Just hoping to find out why i cant do the simple things everyone speaks of.
gixer131 said:
I can appreciate that, but I need to know what to do. I try to do that & i get an error while attempting to run privileged commands. Flashing sounds all great but I cant seem to get it to do anything in recovery... error issues trying to do that, or anything else, I also have super user update issues that say they put a recovery image on the sd card & to go boot that from within recovery.
Just hoping to find out why i cant do the simple things everyone speaks of.
Click to expand...
Click to collapse
Well if you can't flash recovery from Rom Manager then there's something wrong with your root privileges or s-offs... Just to make things clear, how did you try to flash the recovery?
AT THE TOP OF THE BOOTLOADER IT MUST SAY "... ENG S-OFF RL" FOR THIS TO WORK
With the device connected, boot into bootloader and select FASTBOOT and press power once.
It will now show FASTBOOT USB, and give you 4 options.
Download the newest 4.x.x.x version of the cwm recovery from the dev section.
Download My Toolkit and Extract to C:\
In the recovery zip that you downloaded from the dev thread, find the "recovery.img" and extract it to the RESOURCE folder of my toolkit. (make sure its only the recovery.img and not the folders it sits in)
open up a command prompt (windows key + R, type "cmd" and hit enter)
type in: cd "C:\HTC ACE TOOLKIT\RESOURCE" and hit enter.
the prompt should now be in that directory.
now type in the following EXACTLY and press enter afterwards:
fastboot flash recovery recovery.img
Let it flash, and badaboom, you have just flash cwm recovery.
JSLEnterprises said:
AT THE TOP OF THE BOOTLOADER IT MUST SAY "... ENG S-OFF RL" FOR THIS TO WORK
With the device connected, boot into bootloader and select FASTBOOT and press power once.
It will now show FASTBOOT USB, and give you 4 options.
Download the newest 4.x.x.x version of the cwm recovery from the dev section.
Download My Toolkit and Extract to C:\
In the recovery zip that you downloaded from the dev thread, find the "recovery.img" and extract it to the RESOURCE folder of my toolkit. (make sure its only the recovery.img and not the folders it sits in)
open up a command prompt (windows key + R, type "cmd" and hit enter)
type in: cd "C:\HTC ACE TOOLKIT\RESOURCE" and hit enter.
the prompt should now be in that directory.
now type in the following EXACTLY and press enter afterwards:
fastboot flash recovery recovery.img
Let it flash, and badaboom, you have just flash cwm recovery.
Click to expand...
Click to collapse
The BOOTLOADER SAYs "... ENG S-OFF but no RL @ the end
Can someone instruct me to what I may have done wrong? I know if I try to s-off or ENG-off I now get a connection problem but the first time I tried it seemed to work properly.
Thanks
Thanks for the help, I have successfuly flached clockwork now & a new rom.... What should I do to update a radio for my device on telus? Thanks
gixer131 said:
Thanks for the help, I have successfuly flached clockwork now & a new rom.... What should I do to update a radio for my device on telus? Thanks
Click to expand...
Click to collapse
well, in that toolkit i told you to download is a command script that does pretty much what I told you do to for the recovery.
Since you and I have the exact same phone I recommend grabbing the radio from the 2.52 korean build (Radio_12.59.60.26U_26.11.04.21_M), and the rill's as well.
Here is the radio and ril (first 2 links, download via the dropbox links): http://forum.xda-developers.com/showthread.php?t=996630
make sure you're in bootloader > fastboot and it says FASTBOOT USB on the screen
take a radio.img from within the zip and drop it into the resource folder and then run the shorcut in the toolkit.
It will now flash the radio to your phone and reboot.
Now with the rill's you flash via cwm recovery, from the RIL zip you downloaded, off your sd card in the same way you would flash a rom.
JSLEnterprises said:
well, in that toolkit i told you to download is a command script that does pretty much what I told you do to for the recovery.
Since you and I have the exact same phone I recommend grabbing the radio from the 2.52 korean build (Radio_12.59.60.26U_26.11.04.21_M), and the rill's as well.
Here is the radio and ril (first 2 links, download via the dropbox links): http://forum.xda-developers.com/showthread.php?t=996630
make sure you're in bootloader > fastboot and it says FASTBOOT USB on the screen
take a radio.img from within the zip and drop it into the resource folder and then run the shorcut in the toolkit.
It will now flash the radio to your phone and reboot.
Now with the rill's you flash via cwm recovery, from the RIL zip you downloaded, off your sd card in the same way you would flash a rom.
Click to expand...
Click to collapse
I would Like to thank you for your help & support, I was a the step of having fastboot usb And on my pc I unziped the radio And droped the image in the resource folder, a window pops up (disk burner) only option to choose is DVD R Drive.... do I have to have the SD card unmouted as a disk drive to the computer?
leave disk burner outta this. lol
The phone should be in bootloader under "fastboot" so the highlighted area will say FASTBOOT USB (since your phone is connected to your pc).
If radio.img is in the RESOURCE folder of my toolkit, go back to the main folder (HTC ACE TOOLKIT) and just double click the "Flash Radio" shorcut.
JSLEnterprises said:
leave disk burner outta this. lol
The phone should be in bootloader under "fastboot" so the highlighted area will say FASTBOOT USB (since your phone is connected to your pc).
If radio.img is in the RESOURCE folder of my toolkit, go back to the main folder (HTC ACE TOOLKIT) and just double click the "Flash Radio" shorcut.
Click to expand...
Click to collapse
Most excellent! Thanks & Thank you, your help has been most usefull & is quite appreciated!
Changed Rom
Changed rom last night & wanted to know weather I should flash the "rill's" & "radio" each time I change roms. I just did the radio now so hope that cures the tinny sound, also it sounded kinda tinny just playing music, is there a patch or something else to do or is all that fixed in the radio?
Any suggestion on roms to try? using Revolution HD right now.
Hi, I have a problem with this method.
http://forum.xda-developers.com/showthread.php?t=928160
I did all the steps, and when I rebooted my phone the screen shows me a white screen with the logo HTC (Desire Z), and it does not continue.
I have installed the hboot, eng boot, and it works, but I do not know how to use it or copy it in the sd as an image of a rom. Can I install the rom from hboot?, Can I install a recovery from hboot?.
Greetings and thank you very much.
There always used to be a post about "Do not ever use Visionary to root your device" as it has a high chance of bricking your phone. Indeed, in the article you posted, it states to use a different method. The best and safest method I understand is in the Wiki.
Recovery will depend on whether you can get into the recovery. Try press the trackpad while powering on. If you get into that, you have a chance of recovering your phone.
Craig
1. you shouldn´t have used visionary
2. if you really got a eng hboot do the following: download a recovery.img (here a link):
http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
...then start a cmd.exe and type: fastboot flash recovery recovery.img
afterwards you should have a custom recovery, enter it mount usb storage put a rom (.zip) on your sdcard unmount and flash it.
I have a Tmobile G2 rooted running Gingervillian (gingerbread 2.3.1) and I tried to install the Desire z hboot to get the Sense ui.
I followed the steps here, "http://www.youtube.com/watch?v=ogZfSWLlvPg"
HERES THE PROCEDURE OF WHAT I DID:
After updating the PC10IMG.zip (Desire Z hboot) folder to the root of my G2, I was stuck on the HTC logo screen after updating. So I followed what the guy said in the video, deleted the PC10IMG file in my SD card then rebooted my phone.
After rebooting my phone, I was booted back same rom. So I flash/recovery my phone through Rom Manager and tried rebooting my phone to clockwork mod recovery mode.
After rebooting, I didn't go to Clockwork Mod but to FASTBOOT screen? I select "bootloader" and it goes to a quick load that says something like "SD loading, no image or wrong image". I select "Recovery" then it goes to the HTC logo for a split second then I'm back to FASTBOOT screen again.
This is the info on the fasboot screen? don't know if that'll help:
Vision pvt eng S-off
Hboot-0.84.2000 (pc1010000)
Microp-0425
Radio-26.02.15_m2
eMMC-boot
Sep 8 2010, 15:65:38
So now, I don't know what to do and my questions are:
1.) Is there a way to go back to the G2 hboot?
2. Can I still fix this and procedure on and install new roms on recovery clockwork mode, using Desire Z hboot? (as the video did)
Please help a brother out I'm still a noob and still learning. If this is in the wrong place, please move it to the correct place.
Anyone? if it seems confusing, please ask questions or if I need to provide more information. I really need help with this. Any suggestions will help.
Zedomax's guide are outdated, he never updated them when new methods surfaced.
Try a downgrade
http://www.youtube.com/watch?v=VdWt65tUBVc
tarroyo said:
Zedomax's guide are outdated, he never updated them when new methods surfaced.
Try a downgrade
http://www.youtube.com/watch?v=VdWt65tUBVc
Click to expand...
Click to collapse
would any PP99IMG.zip file work? And do I basically put it in the SD's root and put it into the boot menu to update the file?
Thanks
by the way, is this compatible with G2s?
don´t put the pp99img.zip on your sd !
do something different:
download a recovery.img (3.0.2.4 for vision):
http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
be sure to remove any pc10img.zip or so from your sdcard. then put your phone in fastboot mode (power & tp-wake) connect it to pc and flash the recovery through fastboot by typing: fastboot flash recovery recovery.img
after that you should be able to enter recovery. be sure to wipe before installing a new rom...
hoffmas said:
don´t put the pp99img.zip on your sd !
do something different:
download a recovery.img (3.0.2.4 for vision):
http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
be sure to remove any pc10img.zip or so from your sdcard. then put your phone in fastboot mode (power & tp-wake) connect it to pc and flash the recovery through fastboot by typing: fastboot flash recovery recovery.img
after that you should be able to enter recovery. be sure to wipe before installing a new rom...
Click to expand...
Click to collapse
I'm assuming I need to do ADB? If so, Is there a way for Mac ios
prototype2 said:
I'm assuming I need to do ADB? If so, Is there a way for Mac ios
Click to expand...
Click to collapse
Yes, you can run adb on a Mac. See the link to my adb guide in my signature (assuming you're not viewing from the XDA app, which doesn't show the full sig).
Sent from my Desire Z running CM7.
Okay, just to make it clear (I am a "step by step" guy when it comes to technical computer/phone stuff.), from my understanding:
1. Download the recovery.img (3.0.2.4 for vision) and put it in the root of my SD card.
2. Delete any pc10img.zip files from SD card.
3. Turn phone off and then turn phone onto FASTBOOT mode by holding power/volume down/camera or power and tp-wake? (Btw what's tp-wake? and during this process, is the phone in fastboot screen mode while I'm about to type the "flashboot flash recovery recovery.img"?
4. Connect to computer, open up terminal (Mac) and do the ADB process and type in "fastboot flash recovery recovery.img"
5. Wipe clean and install new rom in recovery mode? (Clockwork Mod recovery mode?)
PLEASE correct my steps or add in any steps that I'm missing. I bought my phone rooted so I never went through these steps before. Anyways please correct me, I don't want to ruin my phone anymore than it is already.
anyone can review my steps?
good morning
ad step 1: don´t put it onto your sd; put it into the adb tool folder on your pc !
ad step 3: tp-wake = the square button at the bottom of your phone (the one that acts like a mouse); to enter fastboot mode press power & tp-wake
...the phone should be in fastboot mode while typing the command.
before you type "fastboot flash recovery recovery.img" type "fastboot devices" and look if your phone shows up... if so go ahead with flashig the recovery (by the way, you may have to rename the recovery file)
step 4 and 5 look fine...
good luck
okay, I will try it in a little bit here.
In FASTBOOT USB mode, it wont recognize my device but when my device is fully on, adb works.
I get when I type "flashboot devices" (while the phone is on FASTBOOT) in terminal and get:
"-bash: fastboot: command not found"
By the way, I renamed the downloaded flash to "recovery.img" and put that file in the "platform-tools". Don't know if that'll work.
The "fastboot" command should be on your PC in the same folder as the "adb" command. Where did you get adb from, did you install the SDK and platform tools, or something cut-down ?
Sent from my Desire Z running CM7.
hm... that means that you do not have fastboot installed. maybe google for fastboot on mac, because i have a linux system... so i can´t help you in that point.
other thing you could do is following this guide (it´s a pc10img.zip with dz hboot and clockwork recovery):
http://www.virtuousrom.com/2011/06/t-mobile-g2-users-migrating-to-desirez.html
but first i would try the fastboot method - it´s safer.
Okay, I got the fastboot devices to read my phone. But it cannot load my recovery.img?
This is what got when I typed in "fastboot flash recovery recovery.img" :
error: cannot load 'recovery.img'
rename it to recovery and try again...
It's not loading the img file for some reason..
prototype2 said:
It's not loading the img file for some reason..
Click to expand...
Click to collapse
http://wiki.cyanogenmod.com/wiki/Fastboot
or use the virtuous link...
hoffmas said:
http://wiki.cyanogenmod.com/wiki/Fastboot
or use the virtuous link...
Click to expand...
Click to collapse
that link isn't working
Help. My phone is stuck in a boot loop. No recovery, won't take one even when I flash multiple ways. Won't take a rom. S-off. Was rooted with Revolutionary, but since it wouldn't take a ROM or recovery I tried to unroot. Was able to remove the "Revolutionary" watermark, change hboot from 6.16 to 2.16.0001. Tried installing ruu which is what removed the Revolutionary and changed back hboot.
Here's what I have now:
Supersonic evt2-3 ship s-off
hboot 2.16.0001
Radio 2.15.00.0808
Any help! Thanks.
Looks you might have to get a PC36IMG.zip on your sdcard and then flash that through bootloader
Ideally, put on a froyo PC36IMG so that rerooting is easier if you want to do it again
So what happens when you try to select Recovery from Hboot?
The advice is free....the bandwidth, not so much
Still boot looping...
CNexus said:
Looks you might have to get a PC36IMG.zip on your sdcard and then flash that through bootloader
Ideally, put on a froyo PC36IMG so that rerooting is easier if you want to do it again
Click to expand...
Click to collapse
Already tried that...
FinZ28 said:
So what happens when you try to select Recovery from Hboot?
The advice is free....the bandwidth, not so much
Click to expand...
Click to collapse
All I get is the white "HTC EVO 4G" boot screen. When I flash a custom recovery, everything goes as expected, but still can't access recovery.
You will have to go through all the bootloader ruu's till you find the one that works. Good luck I had the same issue and ended up selling it on eBay and the buyer finally got it working.
Sent from my PC36100 using xda app-developers app
jlmancuso said:
You will have to go through all the bootloader ruu's till you find the one that works. Good luck I had the same issue and ended up selling it on eBay and the buyer finally got it working.
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
Ok. I tried every ruu I could find. Problem remains. Also, s-off never turns to s-on. Tried flashing contents of stock rom separately. Everything appears to flash ok, but same result: no recovery, no rom. Any ideas?
What I think I need is a method to nand unlock via fastboot or hboot. Anyone know of such a thing? Anyone have any other ideas? Besides what I've already done? Thanks...
mabulok said:
What I think I need is a method to nand unlock via fastboot or hboot. Anyone know of such a thing? Anyone have any other ideas? Besides what I've already done? Thanks...
Click to expand...
Click to collapse
S-off is nand-unlocked...run an ruu (any version), as soon as it opens, press windowsKey+R and type "%temp%" then *enter
Now sort the files by date modified and search in the most recent folders for a file called "rom.zip", as soon as you find that copy it to your desktop
Rename the rom.zip to "PC36IMG.zip" and place it on the root of your phones sdcard (you may need to reformat your sdcard to FAT32, make a backup if you need to do this)
Now put the sdcard in your phone, pull out the battery and go into bootloader (VolDown+Power) , the bootloader should find it and commence the update process back to stock unrooted, follow the prompts and press power when necessary
Okay, tried that...
CNexus said:
S-off is nand-unlocked...run an ruu (any version), as soon as it opens, press windowsKey+R and type "%temp%" then *enter
Now sort the files by date modified and search in the most recent folders for a file called "rom.zip", as soon as you find that copy it to your desktop
Rename the rom.zip to "PC36IMG.zip" and place it on the root of your phones sdcard (you may need to reformat your sdcard to FAT32, make a backup if you need to do this)
Now put the sdcard in your phone, pull out the battery and go into bootloader (VolDown+Power) , the bootloader should find it and commence the update process back to stock unrooted, follow the prompts and press power when necessary
Click to expand...
Click to collapse
Tried your method using the rom from an ruu. Still s-off, although everything appeared to have updated. I've done this previously, but not extracting the rom.zip from an ruu. Each time the hboot updates, or downgrades, depending on the ruu, but s-off remains. No rom, no recovery...
Next...
Sometimes the problem is solved by wiping the recovery partition first, and then re-flashing it. To do that, you would need a Hboot where you could run fastboot commands, since you cannot boot into a Rom.
You can try upgrading your Hboot, then unlocking the bootloader using the Htcdev site, so that you can run the fastboot commands. If it fails on the new Hboot, then it can probably be flashed back to whatever Hboot you have, since you're S-OFF.
I've included the Hboot file that you would need for the upgrade. You would first run the PC36IMG file throught the bootloader, then reboot the phone. If the Hboot changes, then you should go to the Htcdev site and try to unlock the bootloader.
There are some other steps that follows, but there's no point of giving them to you now and complicating things unless the initial steps work first.
Update
shortydoggg said:
Sometimes the problem is solved by wiping the recovery partition first, and then re-flashing it. To do that, you would need a Hboot where you could run fastboot commands, since you cannot boot into a Rom.
You can try upgrading your Hboot, then unlocking the bootloader using the Htcdev site, so that you can run the fastboot commands. If it fails on the new Hboot, then it can probably be flashed back to whatever Hboot you have, since you're S-OFF.
I've included the Hboot file that you would need for the upgrade. You would first run the PC36IMG file throught the bootloader, then reboot the phone. If the Hboot changes, then you should go to the Htcdev site and try to unlock the bootloader.
There are some other steps that follows, but there's no point of giving them to you now and complicating things unless the initial steps work first.
Click to expand...
Click to collapse
Ok. This didn't work. I was able to flash the hboot, but fastboot commands did not work. I can unlock, and relock the bootloader, flash any ruu, but s-off remains, and still unable to flash a rom or recovery.
Try this and see what happens: Unzip the fastboot.zip file in side a folder on your computer and place the recovery.img file in that same folder on your computer, then open a command prompt from that folder (shift + right click+"open command window here"). From the FASTBOOT USB menu on the phone (Hboot + click on FASTBOOT): type
fastboot erase recovery <ENTER>
fastboot flash recovery recovery.img <ENTER>
fastboot reboot-bootloader <ENTER>
shortydoggg said:
Try this and see what happens: Unzip the fastboot.zip file in side a folder on your computer and place the recovery.img file in that same folder on your computer, then open a command prompt from that folder (shift + right click+"open command window here"). From the FASTBOOT USB menu on the phone (Hboot + click on FASTBOOT): type
fastboot erase recovery <ENTER>
fastboot flash recovery recovery.img <ENTER>
fastboot reboot-bootloader <ENTER>
Click to expand...
Click to collapse
That didn't work either...