Related
So, somebody please help me. I had the chinese rom. fully updated.
I have no idea wich version it was but i belive most likely it was the last one since i got the telephone last week and updated it.
so, coming from mi max 1 and then mi max 2 i installed TWRP and booted into recovery
and tried to flash eu global rom but it came out as an error and i downloaded a few roms and tried but no sucess in flashing them and then suddenly the screen went black and i can hear it connect and it will show up in miflash but as for now i dont have the recovery files
and am downloading them at the moment.
I remember running into a similar issue on my mimax 2 or 1 and then i needed to flash it using adb and running the flash system commandoes.
But i forgot them and im sure some of you have done this so can anyone help me finding a recovery fastboot files and give me a either miflash supported file to use or adb files and then the commandoes to flash it all back?
it was something like
system flash
recovery flash
boot flash
etc
But i dont have the files for recovery fastboot
and the commandoes are lost for me.
It was like flashing in EDL mode i belive, if i can remember,
I really screwed up and since the telephone is so new its hard to find the files needed.
Thank you and please excuse my bad English.
The one getting me back ill paypal you a beer.
veralynn said:
i downloaded a few roms and tried but no sucess in flashing them and then suddenly the screen went black
Click to expand...
Click to collapse
Which other roms did you try to install?
Latest china official roms have Anti-rollback enabled, so you have to be careful about what rom you trying to install otherwise your device will be hard bricked (if not bricked already).
If your device has bricked by anti-rollback, you need to flash in EDL mode, but EDL mode is blocked on Mi Max 3, so you need a Xiaomi EDL authorized account to flash with it.
Anyway, here is the link of the latest fastboot china stable rom http://bigota.d.miui.com/V9.6.12.0....EDCNFD_20180820.0000.00_8.1_cn_5e8d0ddf88.tgz
You can give it a try with MiFlash Tool.
My max 3 was bricked as well on Sat, no boot, no recovery, no fastboot.
You just need to download the fastboot of 8.9.20 china dev, install Qualcomm driver, then use Miflash to flash ur phone again in EDL mode. That's all.
dinhvtai said:
My max 3 was bricked as well on Sat, no boot, no recovery, no fastboot.
You just need to download the fastboot of 8.9.20 china dev, install Qualcomm driver, then use Miflash to flash ur phone again in EDL mode. That's all.
Click to expand...
Click to collapse
Can you help me findig the link to dev rom?
I am really really lost..
Been at this things for 24 hours now, and i was working on my fiancees phone at the same time so after twrp my own i did his, and then of course we both have black screens now in download mode, and there is nothing i have done that
will get me back to fastboot or to twrp.
If i hold in power it just kinda restarts download mode i can hear on my computer as it make the Plug in plug out sound from the Usb.
I have already gotten a lot of ugly stare downs from my fiancee now and i really cannot afford buying two new phones and of course i shouldnt need to either as since they are in black screen download mode they can be flashed, but i need the file you sir are talking about and also if you can say wich kind of miflash you used and etc i would be very happy and im seriuous about that paypal buying you a beer and what not thing.
I am going on vacation in few days also so i desperately need the phones to work or its not gonna be any happy vacation and definetly not any "happy times" either. so please help out!!
I am also equipped with teamwiewer if necessary,
Also, i opened up my own telephone and tried shorting out the two connectors inside, "testpoint" but it didnt give any difference at all, and i am out of ideas.
And of course now it seems i have searched so long for the correct files i cant find anything any longer as im stuck.
so .- yeah. Please get me out of this mess.
this is the link of 8.9.20 (latest) dev fastboot: http://bigota.d.miui.com/8.9.20/nitrogen_images_8.9.20_20180920.0000.00_8.1_cn_7c2f993484.tgz
For MiFlash, just google "MiFlash 2018" and download the Portable version, that's enough.
For Qualcomm driver, google "QDLoader HS-USB Driver" and download/install it.
Make sure that you can enter the EDL mode, if you do it right, you will see the device as "Qualcomm 9008" (cannot remember exactly the name) and Miflash will recognize the COM port then you are good to move forward.
dinhvtai said:
this is the link of 8.9.20 (latest) dev fastboot: http://bigota.d.miui.com/8.9.20/nitrogen_images_8.9.20_20180920.0000.00_8.1_cn_7c2f993484.tgz
For MiFlash, just google "MiFlash 2018" and download the Portable version, that's enough.
For Qualcomm driver, google "QDLoader HS-USB Driver" and download/install it.
Make sure that you can enter the EDL mode, if you do it right, you will see the device as "Qualcomm 9008" (cannot remember exactly the name) and Miflash will recognize the COM port then you are good to move forward.
Click to expand...
Click to collapse
you just earned urself a beer.
i flashed my telephone sucessfully.
seems forgetting to log out of miaccount is a really dumb thing to do as i now cant flash my fiancees as his telephone is not binded to my laptop, and his is not been used before.
the miflash asked me to log in, wich was succesful but its stuck in edl autitenctation and has been now for a while.
but can i flash global rom now??
and if so, how can i do it and not brick it again?
im guessing you want more than one beer??
Fashing the other it says unautoriszed xiaomiaccount..
Solutions??
veralynn said:
you just earned urself a beer.
i flashed my telephone sucessfully.
seems forgetting to log out of miaccount is a really dumb thing to do as i now cant flash my fiancees as his telephone is not binded to my laptop, and his is not been used before.
the miflash asked me to log in, wich was succesful but its stuck in edl autitenctation and has been now for a while.
but can i flash global rom now??
and if so, how can i do it and not brick it again?
im guessing you want more than one beer??
Fashing the other it says unautoriszed xiaomiaccount..
Solutions??
Click to expand...
Click to collapse
Xiaomi has locked the account of the other phone, you need a Mi Authorized Account, which is not easy to find and is paid of course. Don't flash Global Stable over your China Dev, unless you unlocked bootloader officially. But you have the option to flash Xiaomi.eu rom, if your bootloader is unlocked. If not - don't.
veralynn said:
you just earned urself a beer.
i flashed my telephone sucessfully.
seems forgetting to log out of miaccount is a really dumb thing to do as i now cant flash my fiancees as his telephone is not binded to my laptop, and his is not been used before.
the miflash asked me to log in, wich was succesful but its stuck in edl autitenctation and has been now for a while.
but can i flash global rom now??
and if so, how can i do it and not brick it again?
im guessing you want more than one beer??
Fashing the other it says unautoriszed xiaomiaccount..
Solutions??
Click to expand...
Click to collapse
I do not really understand your current issue. A picture will be better? In case if you forgot to logout, it's ok, you just need to input the password of that account.
Anyway, you cannot flash Global stable 9.6.6 (MIUI 9) over the 8.9.20 (MIUI 10 - antirollback activated), it will brick again.
martin.burgas said:
Xiaomi has locked the account of the other phone, you need a Mi Authorized Account, which is not easy to find and is paid of course. Don't flash Global Stable over your China Dev, unless you unlocked bootloader officially. But you have the option to flash Xiaomi.eu rom, if your bootloader is unlocked. If not - don't.
Click to expand...
Click to collapse
Both telephones are unlocked by the belonging miaccounts.
I have run the unlock tool on them both of course before doing the TWRP and then someplace something got messed up, not sure yet and made me in this mess.
What i have done in difference on my phone and the other is that i have opened up mine and short circuited lol almost all check points inside it and after the last link mentioned here with the rom it worked.
but im not sure if it was the testpoint trick at all as that really didnt give any information about anything changed or not.
What im trying to do here now is to somehow flash this edl phone left back to china dev without me opening it up and do the testpoint wich i have no idea helped me or not.
I can try the unlock tool again see if it recognize any phones.
all help appreciated.
Try flashing China 8.8.30 of the other phone, maybe it will skip asking for Mi authorized acc. I have red somewhere it worked .
OK-
So i can hereby confirm that TESTPOINT is working.
So if you have bricked your phone into edl mode download mode and there is NO WAY you can flash it using miflash or twrp or anything, you can open it up and unplug the battery, short cut the testpoints wich in my case was my fumbling around everyone with a wire and then
retry connecting the battery and reflash.
I also tried testpoint with battery connected. I have NO IDEA if that was the case or not.
But i managed to get back my phones, but of course i nicked one screen so im guessing im gonna need to sell this and rebuy a new one with global as to keep the housepeace intact.
So- i will try and rewrite this into something that can be sticked to the front. Including pictures.
So, if I understand correctly, without the testpoint method, MiFlash was asking you for an authorized xiaomi account but with the testpoint there is no need for authorization?
panospc said:
So, if I understand correctly, without the testpoint method, MiFlash was asking you for an authorized xiaomi account but with the testpoint there is no need for authorization?
Click to expand...
Click to collapse
Well. Good question.
Seems like it doesn't need something else than unlock.
But verified account, its really not a big deal.
Just create a miaccount beforehand and wait the 500 or so hours to unlock.
If you screw up something just testpoint it.
But i was logged into the account on the telephone on miflash. But wasnt verified the laptop i used so i couldn't flash.
But with testpoint Wich was kinda nervewrecking i fixed them both. Again.
I will wait for global official rom before doing this again.
My mi Max 3 is unlocked and bricked. Computer detects it as 9008 and mi flash. When i flash 8.9.2 cn dev rom, it is stuck on dummy.img. It is stuck on dummy.img in other firmware versions as well. How can i fix it ?
Edit : solved by Flashing with QFIL.
Flashed mine to stock global rom.
I was so nervous as hell.
Downloaded the official global and didnt even have the nerves to twrp it.
Do i Flashed it using xiaomi mi flasher and it worked.
Dont feel like messing more with it now...
You didn't take a pic of the test points you shorted by any chance did you? I'm sure that will hep out some people.
Thanks
seti007 said:
You didn't take a pic of the test points you shorted by any chance did you? I'm sure that will hep out some people.
Thanks
Click to expand...
Click to collapse
Try my method before trying to open up your phone with test point method: https://forum.xda-developers.com/mi-max-3/how-to/to-youre-stuck-edl-mode-black-screen-t3837846/page2
Well let me explain this question, i bought this device in aliexpress cause i live in mexico, so, my device version is the chinese (this for the network compatibility).
when the new software version roll out i downloaded in the realme web i tried to install it. But i was not able to, so i unlocked the bootloader to try some custom roms, i install the recovery TWRP , and then i downloaded the pixwel experience, before installing i checked and the realme ui update was released, so i tried to install it, but i couldn't cause i had the bootloader unlocked and the custom recovery.
Next thing i did was install the stock recovery, and then i locked again the bootloader, but now the cellphone dont start, it only shows the screen of "The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it" .
The problem here is, the recovery dont start and the fastboot its locked and i can't bypass that.
I'm looking for a solution, but i want to know if anyone have solve this before or have any idea to do it. Thanks guys!
well it happened to me same the only way is to take it to realme service center or finde some one who have the oppo realme server to flash it like i did ifound a guy who have an official server the flash my device am from algeria
Update
Irvinukis said:
Well let me explain this question, i bought this device in aliexpress cause i live in mexico, so, my device version is the chinese (this for the network compatibility).
when the new software version roll out i downloaded in the realme web i tried to install it. But i was not able to, so i unlocked the bootloader to try some custom roms, i install the recovery TWRP , and then i downloaded the pixwel experience, before installing i checked and the realme ui update was released, so i tried to install it, but i couldn't cause i had the bootloader unlocked and the custom recovery.
Next thing i did was install the stock recovery, and then i locked again the bootloader, but now the cellphone dont start, it only shows the screen of "The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it" .
The problem here is, the recovery dont start and the fastboot its locked and i can't bypass that.
I'm looking for a solution, but i want to know if anyone have solve this before or have any idea to do it. Thanks guys!
Click to expand...
Click to collapse
i´ve been "searching" (not too much to be honest) a way to flash my device, or even easier, to unlock the bootloader, once that is done, i will be able to do the next thing.
There are ways to "force" flashing modifying the hardware (i really don't want to that), other places suggest flashing a vbmeta.img, but i get back to the same, i need the bootloader
im actualy downloading UFI android tool, any update i will post it
Irvinukis said:
i´ve been "searching" (not too much to be honest) a way to flash my device, or even easier, to unlock the bootloader, once that is done, i will be able to do the next thing.
There are ways to "force" flashing modifying the hardware (i really don't want to that), other places suggest flashing a vbmeta.img, but i get back to the same, i need the bootloader
im actualy downloading UFI android tool, any update i will post it
Click to expand...
Click to collapse
well, my research and asking lead me to teh JIG usb to force the download mode, but i need to build it, does anyone have experience with this?
Firstly u need to flash twrp with adb and then use twrp to flash the rom. Then wipe and clean cache and you are done
eni_pog said:
Firstly u need to flash twrp with adb and then use twrp to flash the rom. Then wipe and clean cache and you are done
Click to expand...
Click to collapse
How can i do that with the bootloader blocked?
Can u explain me please?
The solution may be QFI and EMMC download tool, if unbrick the device i'll post a guide
i made a EDL cable that i'm gonna use to try, i don't even know if the device have that mode, i'm actually searching a micro usb to type c usb to try
Irvinukis said:
Well let me explain this question, i bought this device in aliexpress cause i live in mexico, so, my device version is the chinese (this for the network compatibility).
when the new software version roll out i downloaded in the realme web i tried to install it. But i was not able to, so i unlocked the bootloader to try some custom roms, i install the recovery TWRP , and then i downloaded the pixwel experience, before installing i checked and the realme ui update was released, so i tried to install it, but i couldn't cause i had the bootloader unlocked and the custom recovery.
Next thing i did was install the stock recovery, and then i locked again the bootloader, but now the cellphone dont start, it only shows the screen of "The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it" .
The problem here is, the recovery dont start and the fastboot its locked and i can't bypass that.
I'm looking for a solution, but i want to know if anyone have solve this before or have any idea to do it. Thanks guys!
Click to expand...
Click to collapse
I think EDL mode flashing stock ROM is a good way, but is there compatible download tool or image? I have ever used Miflash to downgrade my bootloader locked Xiaomi 4c for unlocking bootloader in EDL mode (maybe "fasboot oem edl" ,"fastboot reboot-edl", or "fastboot reboot edl" command).
Unlocking the Mi4c Bootloader: https://forum.xda-developers.com/mi-4c/general/guide-unlocking-mi4c-bl-verification-t3336779
Miflash guide: https://xiaomi.eu/community/threads/miui-10-developer-rom-8-9-13-with-miflash.47542/
Did you get the solution same problem
Well let me explain this question, i bought this device in aliexpress cause i live in mexico, so, my device version is the chinese (this for the network compatibility).
when the new software version roll out i downloaded in the realme web i tried to install it. But i was not able to, so i unlocked the bootloader to try some custom roms, i install the recovery TWRP , and then i downloaded the pixwel experience, before installing i checked and the realme ui update was released, so i tried to install it, but i couldn't cause i had the bootloader unlocked and the custom recovery.
Next thing i did was install the stock recovery, and then i locked again the bootloader, but now the cellphone dont start, it only shows the screen of "The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it" .
The problem here is, the recovery dont start and the fastboot its locked and i can't bypass that.
I'm looking for a solution, but i want to know if anyone have solve this before or have any idea to do it. Thanks guys!
did u get the solution bro
Not yet, i have some steps to do it, but now im facing the last step, the file don´t get recognized by the tool, this tool ask for a scatter file, and the one with QFIL, i need a xml firehose fle, and i havent found it
did u get the solution bro[/QUOTE]
What i got is this:
Emergency download: press vol + and vol - then connect it to the pc, the pc will recognize it as port 9008 com in the device manager of your pc, if yor phone reboots u have to disconnect the battery cause the battery forces the reboot of the EDL mode, maybe if you put the phone on EDL mode an then quickly flash would work with out tearing appart the device
Files: you need to install qualcomm drivers (https://gsmusbdrivers.com/download/android-qualcomm-usb-driver/), download the .ofp file of your device (i get if from here https://oppostockrom.com/oppo-realme-x-rmx1901 ), then you need to download the tool you will use
here is where things are gonna get a bit harder
MSMDownload: this is the official tool, it came withe ofp file from the link i put before, the proble is you need a user and password, i haven't found where to get one official, its from oppo workers i guess
There is a cracked version, but don't recognizes the file
QFIL: its for qualcom devices (found it here https://androidmtk.com/download-qualcomm-flash-image-loader-qfil), this will let you flash every qualcomm device (or thats what they tell you), it shows the port, but ask for a xml file and a programer path (thing that i haven't found it yet)
Cracked MSMDownload: i found this https://www.techoxygen.com/msm-download-tool/ , https://romprovider.com/2020/02/flash-qualcomm-devices-using-msm-download-tools/, or this https://www.youtube.com/watch?v=0CKsEOfGGaQ
now, in my case the file its not recognized, it says incorrect scatter file, from here you can start diggin around, if you solve this please let me know
What i got is this:
Emergency download: press vol + and vol - then connect it to the pc said:
https://gsmusbdrivers.com/download/android-qualcomm-usb-driver/),[/url] download the .ofp file of your device (i get if from here https://oppostockrom.com/oppo-realme-x-rmx1901 ), then you need to download the tool you will use
here is where things are gonna get a bit harder
MSMDownload: this is the official tool, it came withe ofp file from the link i put before, the proble is you need a user and password, i haven't found where to get one official, its from oppo workers i guess
There is a cracked version, but don't recognizes the file
QFIL: its for qualcom devices (found it here https://androidmtk.com/download-qualcomm-flash-image-loader-qfil), this will let you flash every qualcomm device (or thats what they tell you), it shows the port, but ask for a xml file and a programer path (thing that i haven't found it yet)
Cracked MSMDownload: i found this https://www.techoxygen.com/msm-download-tool/ , https://romprovider.com/2020/02/flash-qualcomm-devices-using-msm-download-tools/, or this
now, in my case the file its not recognized, it says incorrect scatter file, from here you can start diggin around, if you solve this please let me know
Click to expand...
Click to collapse
Hi man , did you try this method?
devilkar said:
Hi man , did you try this method?
Click to expand...
Click to collapse
yeah, i tried, but my bootloader its blocked
zaki789 said:
well it happened to me same the only way is to take it to realme service center or finde some one who have the oppo realme server to flash it like i did ifound a guy who have an official server the flash my device am from algeria
Click to expand...
Click to collapse
Hi bro i from algeria too can you tell where you flashed your phone, please adresse phone number any help, thank you
Weird screen behavior, it seem to me that it isn't a hardware fault, cause when plugging in a charger the phone is able to show the MI logo, but not the charging icon
The phone is able to boot and i can hear the phone locking and unlocking, can see that the screen is on because of the backlight, but there is no image, SO FRUSTRATING!!
If you have any idea of what's going on and can give me a tip, i would thank you so much, the phone has been on this state for a long time
Don't know how to upload videos, if you think that can help diagnose it i can upload it and share a link or something
Hugask said:
Weird screen behavior, it seem to me that it isn't a hardware fault, cause when plugging in a charger the phone is able to show the MI logo, but not the charging icon
The phone is able to boot and i can hear the phone locking and unlocking, can see that the screen is on because of the backlight, but there is no image, SO FRUSTRATING!!
If you have any idea of what's going on and can give me a tip, i would thank you so much, the phone has been on this state for a long time
Don't know how to upload videos, if you think that can help diagnose it i can upload it and share a link or something
Click to expand...
Click to collapse
What did you do before?
Did you flash something?
Is it device unlocked?
This happen also in fastboot/recovery mode?
SubwayChamp said:
What did you do before?
Did you flash something?
Is it device unlocked?
This happen also in fastboot/recovery mode?
Click to expand...
Click to collapse
I hadnt updated my Rom, Pixel experience, in a while, so i took the opportunity and flashed an (at the time) beta Pixel Experience Android 10, i reverted and everything was fine for about one day i think, then some artifacting wich would come and go until the display gived up completly (about an hour between the two)
Yes, it is unlocked, and when in fastboot/recovery the screen is lighted up but not showing anything
My guess is that i have a low level firmware issue, as i had problem with those before (was running a custom ROM from day 1, so i had to manually update firware to use newer versions of PE (still pie version) and almost bricked my device
Hugask said:
I hadnt updated my Rom, Pixel experience, in a while, so i took the opportunity and flashed an (at the time) beta Pixel Experience Android 10, i reverted and everything was fine for about one day i think, then some artifacting wich would come and go until the display gived up completly (about an hour between the two)
Yes, it is unlocked, and when in fastboot/recovery the screen is lighted up but not showing anything
My guess is that i have a low level firmware issue, as i had problem with those before (was running a custom ROM from day 1, so i had to manually update firware to use newer versions of PE (still pie version) and almost bricked my device
Click to expand...
Click to collapse
Then try the next:
- Flash a different vendor.
- Flash a different kernel.
- Revert to stock ROM, no need to lock or nothing, just flash first the recovery ROM but if it doesn't result then flash the fastboot ROM through EDL, so that you know you can boot to EDL mode without need to open the back cover, this will restore all the original images.
SubwayChamp said:
Then try the next:
- Flash a different vendor.
- Flash a different kernel.
- Revert to stock ROM, no need to lock or nothing, just flash first the recovery ROM but if it doesn't result then flash the fastboot ROM through EDL, so that you know you can boot to EDL mode without need to open the back cover, this will restore all the original images.
Click to expand...
Click to collapse
Ok, so... i think i have all the files, but i'm really lost, how am i supposed to flash the vendor, firmware and stock ROM via fastboot?
Also, i put the device in fastboot, so... thats a win i guess (screen working surprisingtly)
I'm just not finding how to do this, it's been a while that i havent messed with this side of android, if you could help me it would mean the world for me
Hugask said:
Ok, so... i think i have all the files, but i'm really lost, how am i supposed to flash the vendor, firmware and stock ROM via fastboot?
Also, i put the device in fastboot, so... thats a win i guess (screen working surprisingtly)
I'm just not finding how to do this, it's been a while that i havent messed with this side of android, if you could help me it would mean the world for me
Click to expand...
Click to collapse
You can flash some images invoking the right partition, I mean, you can flash vendor image onto the vendor partition using
Code:
fastboot flash vendor vendor.img
, and in case you need to flash all the ROM you should use MiFlash tool
SubwayChamp said:
You can flash some images invoking the right partition, I mean, you can flash vendor image onto the vendor partition using
Code:
fastboot flash vendor vendor.img
, and in case you need to flash all the ROM you should use MiFlash tool
Click to expand...
Click to collapse
Ok, so... i am NOT keeping up with what i need to do, i found a vendor update in a site but it is not an image, i am so confused, i don't how was i able to mess around with this i am basically a noob, i feel so dumb, this should have been so easy and here i am having trouble
If you could make a step by step instruction or send a link where i can get a vendor .img it would be perfect thanks in advance
Hugask said:
Ok, so... i am NOT keeping up with what i need to do, i found a vendor update in a site but it is not an image, i am so confused, i don't how was i able to mess around with this i am basically a noob, i feel so dumb, this should have been so easy and here i am having trouble
If you could make a step by step instruction or send a link where i can get a vendor .img it would be perfect thanks in advance
Click to expand...
Click to collapse
Ok, update what is the current status of your device, you said screen now displaying, Did you refer only to fastboot mode? Could you see the bunny in fastboot? But booted up on system screen is displaying nothing?
SubwayChamp said:
Ok, update what is the current status of your device, you said screen now displaying, Did you refer only to fastboot mode? Could you see the bunny in fastboot? But booted up on system screen is displaying nothing?
Click to expand...
Click to collapse
Yes, that is correct, i can see the fastboot screen 100%, no artifacts, just plain working, still no recovery (if i remember right i have orange fox) or ROM screen
Hugask said:
Yes, that is correct, i can see the fastboot screen 100%, no artifacts, just plain working, still no recovery (if i remember right i have orange fox) or ROM screen
Click to expand...
Click to collapse
And what do you want to do now? Did you unlock bootloader?
SubwayChamp said:
And what do you want to do now? Did you unlock bootloader?
Click to expand...
Click to collapse
I actually want to check that, i took the phone to a tecnitician and he may have locked the bootloader
I think the next step would be flashing the vendor, firmwares and stock rom again, right?
Hugask said:
I actually want to check that, i took the phone to a tecnitician and he may have locked the bootloader
I think the next step would be flashing the vendor, firmwares and stock rom again, right?
Click to expand...
Click to collapse
if your bootloader is locked, you can't flash through fastboot mode either vendor or stock ROM, you should need to use EDL method or you can re-unlock bootloader and this way will work. Anyway i don't understand what actually your issue is.
SubwayChamp said:
if your bootloader is locked, you can't flash through fastboot mode either vendor or stock ROM, you should need to use EDL method or you can re-unlock bootloader and this way will work. Anyway i don't understand what actually your issue is.
Click to expand...
Click to collapse
The issue is the display not working, and it's gotta be a firmware issue as it's on my desk right now showing a bunny, also i am not used to fastboot flash anything, i just was used to recoveries and what not
Just runned some code and it's locked, this is getting better and better oh boy
How am i gonna unlock this if i can't even unlock the phone? last time with screen working it was already a nightmare, having to wait for miui account, do i have any method of doing this without using EDL?
Hugask said:
The issue is the display not working, and it's gotta be a firmware issue as it's on my desk right now showing a bunny, also i am not used to fastboot flash anything, i just was used to recoveries and what not
Just runned some code and it's locked, this is getting better and better oh boy
How am i gonna unlock this if i can't even unlock the phone? last time with screen working it was already a nightmare, having to wait for miui account, do i have any method of doing this without using EDL?
Click to expand...
Click to collapse
Well, this make sense although it's not clear if you did unlock it previously and after that at some time you did lock it again.
If you didn't unlock it previously you would need to bind your Mi account to the device and enable USB debugging and OEM unlock options but if you didn't before without a screen working you have a more difficult way, confirm me if that is the case.
Anyway I got happily surprised when I bought this device some months ago at the first attempt I could unlock it without have to wait time, try it and see what happen.
SubwayChamp said:
Well, this make sense although it's not clear if you did unlock it previously and after that at some time you did lock it again.
If you didn't unlock it previously you would need to bind your Mi account to the device and enable USB debugging and OEM unlock options but if you didn't before without a screen working you have a more difficult way, confirm me if that is the case.
Anyway I got happily surprised when I bought this device some months ago at the first attempt I could unlock it without have to wait time, try it and see what happen.
Click to expand...
Click to collapse
It was unloked and i locked again, don't know if this helps my case or if i am royally screwed up
And yeah, Xioami does make difficult to do the process of unlocking but only to recently released devices, aparently to stop re-sellers to buy the cheaper chinese rom and put the global version on them, i think that when a device doenst get made anymore makes sense that they would make it more easy (i bought the device 2 weeks after launch)
Hugask said:
It was unloked and i locked again, don't know if this helps my case or if i am royally screwed up
And yeah, Xioami does make difficult to do the process of unlocking but only to recently released devices, aparently to stop re-sellers to buy the cheaper chinese rom and put the global version on them, i think that when a device doenst get made anymore makes sense that they would make it more easy (i bought the device 2 weeks after launch)
Click to expand...
Click to collapse
Ok, of course this makes a huge difference, if you did unlock it previously then you couldn't receive any wait time, I wonder why you didn't try it if you didn 't. Check if MiUnlock tool unlock your device instantly.
SubwayChamp said:
Ok, of course this makes a huge difference, if you did unlock it previously then you couldn't receive any wait time, I wonder why you didn't try it if you didn 't. Check if MiUnlock tool unlock your device instantly.
Click to expand...
Click to collapse
OMG THIS WORKED
It's been sucessfully unlocked
Hugask said:
OMG THIS WORKED
It's been sucessfully unlocked
Click to expand...
Click to collapse
Hmm, OK, now you have your way sorted out, you can try with a custom ROM (all of them contain a vendor) or in case a custom ROM doesn't solve it you have to try a stock ROM through Mi Flash tool.
SubwayChamp said:
Hmm, OK, now you have your way sorted out, you can try with a custom ROM (all of them contain a vendor) or in case a custom ROM doesn't solve it you have to try a stock ROM through Mi Flash tool.
Click to expand...
Click to collapse
Ok, but how am i gonna flash a rom with fastboot? Is that a thing?
Also, i don't think the vendor is gonna be my only problem, but also the firmware, is there a way to flash firmware without the recovery and trough fastboot?
Hugask said:
Ok, but how am i gonna flash a rom with fastboot? Is that a thing?
Also, i don't think the vendor is gonna be my only problem, but also the firmware, is there a way to flash firmware without the recovery and trough fastboot?
Click to expand...
Click to collapse
You can't be sure of that, sometimes the vendor correct the issue, sometimes the firmware.
Firmware it is in the stock ROM that can be flashed either through fastboot or EDL mode (be careful to not relock bootloader or you couldn't enable this time OEM unlock option). Now that you have the way more clear just do a search "how to flash stock ROM on Xiaomi devices either through fastboot or EDL mode", just keep in mind that you don't need to open the back cover of the device, usually from a device off (only on unlocked ones) you could send it to EDL by pressing both volume buttons at same time that it is connected to PC, I gave you the main tips, for the rest you will find a lot of tutorials.
Hello,
The Xiaomi 9 SE Global Unlocked of my girlfriend was restarting a lot (restart loop) and I tried to flash a ROM but I accidentaly flashed and locked the mobile on a "MIUI version that can´t be installed on this device" (grus_global_images_V12.0.2.0.QFBMIXM_20200910.0000.00_10.0_global)
The problem is the phone was wiped and I cant unlock the phone now. What to do? I can´t flash another ROM or unlock it and I just have access to Recovery Mode and Fastboot mode.
Please any help would be greatly appreciated.
It´s 4 am where I live and I´ll go to bed... But Will read here as soon as I´m awake. Thanks a lot in advance.
Let me continue my story... I still need help.
I contacted an authorized and he helped me to EDL a flashed version and I reinstalled the MIUI 12.0.2 Global stable on the phone.
But the phone is still TURNING OFF BY ITSELF (this was the reason because I tried flashing it on the first place). I don´t know the cause but it does not seems to be a faulty battery. I heard the phone has Anti RollBack protection. Is it right?
So I need help on how to procced. I would like to RollBack it to MIUI 11 where I didn´t had this problems...
Unfortunately you can NEVER go back once you flash a ROM on Xiaomi devices. However that doesn't prevent you from flashing custom ROMs.
Though you still need to be careful, because once flashed there is no going back.
I recommend testing the ROM on an emulator before flashing it. Here is how.
Also don't forget to check for your rollback protection index and the ROM's index before flashing.
Follow this post and scroll down to "How to find rollback index of images".
XDHx86 said:
Unfortunately you can NEVER go back once you flash a ROM on Xiaomi devices. However that doesn't prevent you from flashing custom ROMs.
Though you still need to be careful, because once flashed there is no going back.
I recommend testing the ROM on an emulator before flashing it. Here is how.
Also don't forget to check for your rollback protection index and the ROM's index before flashing.
Follow this post and scroll down to "How to find rollback index of images".
Click to expand...
Click to collapse
what do you mean never? you can flash miui with miflash
giorgarasgr said:
what do you mean never? you can flash miui with miflash
Click to expand...
Click to collapse
You can read more about xiaomi anti-rollback here.
I have a Ginkgo model which I am using with LineageOS 17.1 / TWRP. It is pretty cool.
However I want to return completely to the Global (EU) version of the software, including stock recovery, ROM, relocked bootloader, anything, because I am willing to sell the phone.
Next user will be average user, unlike me, so he/she won't appreciate any modifications.
Tried to search for suggestions but no luck.
Before installing LoS, I installed Xiaomi.EU 12.5 stable from here: https://xiaomi.eu/community/threads/miui-12-0-12-1-12-2-12-5-stable-release.56191/
Could have some relevance like firmware partition, etc. AFAIK it is Chinese ROM based, will that make any problems when I re-flash EU version?
Found this one: https://forum.xda-developers.com/t/how-to-completely-revert-back-to-stock.4088665/
But before trying and possibly bricking the phone, I'd like to hear some encourage from you guys. Phone was EU version originally.
Many thanks.
HUN_Gyuszi said:
I have a Ginkgo model which I am using with LineageOS 17.1 / TWRP. It is pretty cool.
However I want to return completely to the Global (EU) version of the software, including stock recovery, ROM, relocked bootloader, anything, because I am willing to sell the phone.
Next user will be average user, unlike me, so he/she won't appreciate any modifications.
Tried to search for suggestions but no luck.
Before installing LoS, I installed Xiaomi.EU 12.5 stable from here: https://xiaomi.eu/community/threads/miui-12-0-12-1-12-2-12-5-stable-release.56191/
Could have some relevance like firmware partition, etc. AFAIK it is Chinese ROM based, will that make any problems when I re-flash EU version?
Found this one: https://forum.xda-developers.com/t/how-to-completely-revert-back-to-stock.4088665/
But before trying and possibly bricking the phone, I'd like to hear some encourage from you guys. Phone was EU version originally.
Many thanks.
Click to expand...
Click to collapse
Follow this guide
and don't relock the bootloader
loopypalm said:
Follow this guide
and don't relock the bootloader
Click to expand...
Click to collapse
Thank you so much. It means I must not relock the bootloader? This is pretty sad because then I cannot guarantee 100% factory software. Buyer for my phone will complain. No chance to reach factory software 100%?
HUN_Gyuszi said:
Thank you so much. It means I must not relock the bootloader? This is pretty sad because then I cannot guarantee 100% factory software. Buyer for my phone will complain. No chance to reach factory software 100%?
Click to expand...
Click to collapse
it will brick the phone and your only way to fix it is EDL
I am happy to update the thread with good results.
Please note that the following are my personal experience described, I cannot guarantee anything and you might get a bricked phone. Please dont blame me if anything goes wrong!
Originally my phone was Global/EEA, and I had Xiaomi.EU and LineageOS 17.1 also this year. After this, I successfully reverted to complete factory software, including relocking the bootloader. This is necessary if you want to sell your phone to other people because they dont need custom ROMs and will complain.
First, go to this link: https://c.mi.com/oc/miuidownload/detail?guide=2
(make sure to follow the 'Fastboot Update' guide on this link!)
On Step 1, click on the link to download the Flash tool.
On Step 2, select your proper device (mine was 'Xiaomi Redmi Note 8 Latest EEA Stable Version Fastboot File Download'). I think region (like Chinese, Global/EEA) is hardcoded to the phone, so you cannot flash Global ROM to a Chinese phone, but please fix me. Pay attention what you select here.
Once both files are downloaded, extract them (you can use 7-zip).
Put your phone to fastboot mode.
Connect your phone with USB cable to your Windows machine. Start the flash tool, make sure to run it as admin. AFAIK it will present a dialog to install the necessary drivers which is needed to communicate with the phone in fastboot mode, just click OK for that.
Check if your phone is present in the list. On the left bottom side, click on 'clean all and lock'. Select the extracted directory of the fastboot ROM you downloaded. Press the flash button.
Wait for a few minutes. Your phone will boot up with original MIUI ROM.
You might also check logs. You need to have a ton of fastboot commands and a successful locking at the end.
Important notes: flash chinese ROM for chinese phone, global or eea for european/global phones. You can only relock your bootloader using the proper region.
Good luck anyone reading this!