Hi Developers,
I have been stucked with this issue and couldn't find answer anywhere else, hope you could shed some light in this.
I bought an Ipega game controller 9083s. Connect with Bluetooth, no issue. But it doesn't work with Shootingplus V3, a gamepad mapping app i guess. The app just detect the connection for 2 seconds and it's disconnected (even Bluetooth still connect with the gamepad). I tried it with some of my friend's phones like Fold 3, Note20 Ultra and it works perfect (with same set up steps)
Related
First off I apologize if this is in the wrong section. I hope some one on here can help me, though, with the problem I am having. I have my PS3 controller connected to my Note 2 via micro usb to mini usb connector(The one included with The Gameklip). I bought it mainly for emulators, but I am having a problem setting up anything with the right analog stick(RS)
FPse(playstation emulator)- In button mapping, I can set all the buttons, including the LS, but nothing registers with any direction on the RS. The R3 button works but that is all.
n64oid(Nintendo 64 emulator-also tried MegaN64 same result). Pretty much the same deal with FPse. I wanted to set the C-buttons to the right analog but no dice. Also another problem arose. Both D-pad and the Left analog share button mappings, and I can't seem to separate them. Anyway to fix this?
I tried Dead Trigger, GTA III, and Shadowgun and the right analog worked perfectly fine, so I know it's not the controller. I've looked in countless topics on here and other forums but most of the solutions involve the Six axis app which only works with the controller connected via bluetooth-root required, but not connected directly, like I have.
Has anyone been able to get their right analog stick working in any emulators? Thank you for your time, and thanks in advance.
Bump. I also wanted to mention that while the controller is plugged all 4 of the lights on the ps3 controller are lit up and slowly blinking. Not sure why it just doesnt have the "player 1" light on
Bump. This problem has been plaguing me on multiple devices.
Having same problem, just need to find a 64 em that allows custom control mapping maybe?
Hey all, so I'm trying to use a Dualshock 4 as an input device via bluetooth. It connects fine, but there's absolutely no input - a whole lot of nothing happens when pressing any buttons. The controller works fine when connected to my Moto X Play, but for some reason the Pixel ain't happy with it. Anyone else experienced this before and have any solution?
Cheers!
hi, can I use the ps4 control with the BlackShark2? tnks. :good:
SePudrioLaMomia said:
hi, can I use the ps4 control with the BlackShark2? tnks. :good:
Click to expand...
Click to collapse
Yes and no. Ds4 works perfectly outside of shark space (the gaming mode) with zero issues.
With sharkspace enabled the ds4 looses connection and fails to reconnect untill sharkspace has been disabled/quit.
We can load sixaxis controller app from inside sharkspace, so in the future with root access (we currently don't have root) it should be usable in its gaming mode. But at present your going to have to play without one of the black sharks main selling points if you want to use your dual shock for.
This is also the case for all my 3rd party controllers, one user has claimed success with an ipega controller, but I've not got one to test, note planning on getting one.
The official controllers for the blackshark 2 are probably going to be the best option for full compatability unfortunately
Thanks bro!! I appreciate the time and dedication in the response, greetings. Maxx.-
Which controller have you guys tried? I tried my wireless controller using otg but seems like it doesn't recognize otg connection ?
Rishabh1x said:
Which controller have you guys tried? I tried my wireless controller using otg but seems like it doesn't recognize otg connection
Click to expand...
Click to collapse
I've tried a DS3, ds4, c.t.r.l and a nvidia shield bt controller, none worked inside sharkspace all worked outside.
I also manually changed the master addresses of the controllers aswell via a pc to match the blackshark2 with no success, tried various gamepad mappers also with no success.
As above there's a post on here somewhere someone recogned the i.p.e.g.a controllers work but personally I am not willing to buy one to test, maybe if someone with a legitimate blackshark2 controller would mind sharing the master bt address the controllers use we could use a pc to change our controllers (ds4 etc) to match, and maybe the blackshark would recognise our Bluetooth controllers as the official ones in sharkspace and stay connected.
That's my only other suggestion/idea untill we have Root access, and even then if they connect and they still probably won't, I dunno if there would be input issues caused as a result of the hardware not matching the software
As far as your otg controller is concerned does it connect and function as intended outside of sharkspace?
It doesn't work at all using otg. It says charging device ?
Just tried again, so my controller has two config dinput mode and xinput mode. Turns out one of them works and the other is not recognised. I think the xinput mode is what works and when I switch to it the controller works outside and inside shark space as well. Although, the button are a bit wrong but i remap them in game and i can play fortnite without any issues. I will still buy the black shark gamepad 2.0 though.
Your absolutely correct buddy thank you.
Dinput controllers such as the ds4 are not working inside sharkspace.
The nintendo switch joycons use xinput and work with the blackshark inside sharkspace. I did notice some input lag on the joycons but to be honest I wasnt playing the best game to test a controller. The switch pro controller also uses xinput so will assume that works aswell, but again not got one to test.
I have the Black Shark Gamepad 2.0, which is unfortunately a bit of a disappointment. It has some very strange aspects to it: Y button cannot be mapped in Shark Space mode, it acts as some toggle between touch screen emulation and mouse cursor mode, which I don't understand why someone would use that. It's useless to me as someone who wants it solely for emulators.
When used outside of Shark Space mode, the DPad and the lettered face buttons both register as the same thing A/B/X/Y buttons. Also, the right touchpad does not act like a stick, instead it acts like a mouse.
On top if this, there are no start, select or L3/R3 buttons. This amounts to playing in Shark Space mode leaving you 5 buttons short of a full controller and outside Shark Space to playing 8 buttons short.
I could get the master BT address for you but I am not exactly sure how to do it. Do I just need to pair it to a PC and do... what?
Has anyone tried using the Xbox 360 controllers
Trying to pair a PS4 controller through Bluetooth and it's not working on my note 10 plus. It pairs fine but the phone seems to receive no input from it. Trying to unpair the controller hangs and never finished disconnecting. If I turn off the controller, the phone still thinks it's connected. Turning off Bluetooth takes a minute or so as well.
It works perfectly fine on my wife's s10 plus, and after it failed to work on my note 10 I tried pairing it with my note 8 for the first time and it also worked perfectly. I was really looking forward to using Samsung Dex with my living room TV and the PS4 controller to play emulated games.
Hoping this is a software issue that can be fixed and not a bug with the Bluetooth radio on my phone. My gear fit 2 paired fine and works great as far as I can tell. My headphones work fine through bluetooth and so does the bluetooth/aux adapter in my car. So it leads me to believe it could be software issues. The controller works fine on everything else.
I checked for updates and there was an Android update from Verizon but it did not fix the issue.
Also the controller works if I hook it up to USB via the USB C adapter included with the phone but the input is all wonky. Shoulder buttons are start and select, up is triangle, etc. I know there's ways to alter the input to fix that but it works perfectly by default on bluetooth on my other two Samsung phones.
Hi everyone,
I'm really disappointed as I have tried to play using PlayStation 4 controller redmagic 6 global rom but unfortunately it's not working properly as I faced movement issue like "delay"
" specially when I play cod mobile, I have recorded a video see below link,
I really hope someone can help me with this as l had tried to communicated with nubia technical team but unfortunately they did not help me.
Also I was thinking to root my phone hoping maybe will solve this but I'm not sure.
call of duty mobile issue.mp4
drive.google.com
I have the same issue. I find I dominate using the triggers on the red magic though.
A work around I do is using my razer Kishi, I connect my ps4 controller and play with the razer Kishi with no lag. Ps4 controller needs to be connected but u don't actually use it cos the lag over Bluetooth is like you've shown
Mind to suggest for trying gamesir x2 gamepad. It is working like a charm! Beside, it is cheaper than razer Kishi in my country currency.
Dual Shock controller work fine but do not use bluetooth use cable like this
I'm having all sorts of issues, tried with cod and could only get a few of the buttons to work, no movement at all. I get the same when trying Xbox cloud too. A couple of the buttons work but sticks nor d-pad has any input what so ever. Am I missing something?