Hello,
Just after android 13 stable I notice a issue with a voice call (no audio), but this is just when I using Bluetooth headset, I tried with 4 different headset including pixel buds pro with same result, but if disconnect the headset or switch the the phone call audio to phone speaker, it work, the phone call come back. It important to be clear I am able to listen to listen music, watch videos, notification even use Google assistant and everything work as I expected, this issue Is focus specifically on phone call whit audio through Bluetooth. Any suggestion?? Thanks.
Related
The subject says it all. Can I route audio through Bluetooth A2DP and the phone's speaker simultaneously? I want to keep my phone connected to my car's audio system via Bluetooth voice and A2DP. But sometimes I want to switch to XM Radio or other sources. When I do that of course, I lose audio prompts from Google Navigation.
Is this possible?
jalanjkcarp said:
The subject says it all. Can I route audio through Bluetooth A2DP and the phone's speaker simultaneously? I want to keep my phone connected to my car's audio system via Bluetooth voice and A2DP. But sometimes I want to switch to XM Radio or other sources. When I do that of course, I lose audio prompts from Google Navigation.
Is this possible?
Click to expand...
Click to collapse
I'm looking for the same thing. I can get audio through Bluetooth and have notifications go to speaker at the same time, but I can't get other media to go to speaker at the same time.
I would also be satisfied with a widget that lets me toggle the A2DP status of the Bluetooth connection on and off. It would not be the end of the world if I needed to toggle the A2DP off when I switch to another radio source and toggle back on when I go back to Bluetooth as the source in the car.
Sent from my Samsung Galaxy Note 2 using Tapatalk.
A2DP + phone speaker simultaneously
jalanjkcarp said:
The subject says it all. Can I route audio through Bluetooth A2DP and the phone's speaker simultaneously? I want to keep my phone connected to my car's audio system via Bluetooth voice and A2DP. But sometimes I want to switch to XM Radio or other sources. When I do that of course, I lose audio prompts from Google Navigation.
Is this possible?
Click to expand...
Click to collapse
If you ask me I'd say it's possible.Whenever my phone is connected to my stereo through A2DP, the music is played through loudspeakers only by default. However, when there's an incoming call and my ringtone is being played I can hear it through loudspeakers AND the phone speaker, which creates a pretty cool surround effect. I'd really love to make my music player interact with all the speakers like this all the time. I took my chance installing various apps like SoundAbout to help me figure it out, all to no avail. Any ideas?
Here are the details
Honda Odessey 2013
OnePlus One 64GB, running 11.0-XNPH33R and franco kernel r16
Android Wear 1.0.1.1379611
Google Play Service 5.0.89 (1307510-038)
Google Search 3.6.14.1337016.arm
Moto 360 4.4W.1/KGW42N
Without Moto 360/Android Wear, my phone will pair with the car just fine
I can listen to audio (streaming from Tunein Radio)
I can make voice call, and the call will go through car speaker
With Moto 360/Android Wear, my phone will pair with the car just fine
I can still listen to audio (streaming from Tunein Radio)
However, when I make a voice call on my phone, the audio does not go through car speaker
Phone is still connected via bluetooth
On the dialer, there's an icon for directing audio to headset, speaker, or bluetooth. bluetooth option is not dimmed, but I can't select it either
In short, when Moto 360 is paired to the phone, voice call audio only go through phone speaker
As a test, while I am still on the call, with audio going through phone speaker, I goto Android Wear, and disconnect Moto 360. 5 seconds later, voice call audio go through car speaker!
Does anyone have experience with moto 360 and bluetooth voice call over car speake?
I hope this is a bug, and not a feature!
animefans said:
Here are the details
Honda Odessey 2013
OnePlus One 64GB, running 11.0-XNPH33R and franco kernel r16
Android Wear 1.0.1.1379611
Google Play Service 5.0.89 (1307510-038)
Google Search 3.6.14.1337016.arm
Moto 360 4.4W.1/KGW42N
Without Moto 360/Android Wear, my phone will pair with the car just fine
I can listen to audio (streaming from Tunein Radio)
I can make voice call, and the call will go through car speaker
With Moto 360/Android Wear, my phone will pair with the car just fine
I can still listen to audio (streaming from Tunein Radio)
However, when I make a voice call on my phone, the audio does not go through car speaker
Phone is still connected via bluetooth
On the dialer, there's an icon for directing audio to headset, speaker, or bluetooth. bluetooth option is not dimmed, but I can't select it either
In short, when Moto 360 is paired to the phone, voice call audio only go through phone speaker
As a test, while I am still on the call, with audio going through phone speaker, I goto Android Wear, and disconnect Moto 360. 5 seconds later, voice call audio go through car speaker!
Does anyone have experience with moto 360 and bluetooth voice call over car speake?
I hope this is a bug, and not a feature!
Click to expand...
Click to collapse
I have the same exact issue but with a Bluetooth earpiece, the voice call audio will not go through my BT earpiece. I've missed many important calls due to this. It's almost as if the voice audio is being rerouted to the watch!
Same issue
I have the exact same issue. It is with my wife's car, a 2014 MAzda CX-5 and also occasionally in my Nissan LEAF. It bothers me.
Same here with my 2014 Genesis.
For those replying to the OP, you might want to list your phone too, not just your car, since it's more likely the phone that's the issue.
On my Nexus 5, I don't see this issue with my 2004 Acura, nor with my wife's 2014 Jeep. I've received and made calls in both vehicles just fine, although, I will say that I haven't had much luck using the 360 to place the call. It always seems to fail to find the right person, or simply fail to understand my command at all.
I'm having similar issues with my G3 and BMW M4.... If my phone and the watch are connected, the car will *usually* connect normallyl... but if I make a call, the call usually goes fine for a while but then all of a sudden the car will lose the connection randomly. This did not happen before I had the watch. If i disconnect the watch from the phone, the car phone picks right back up and works normally. There have also been a few times where the phone and the car have not automatically paired now that I have the watch. Any fixes? Is there a way to prioritize bluetooth to the car connection? I did notice that one time when my call got kicked off the carphone was when a message was coming through.
I paired a BT earpiece to my SWR50. It plays music and I hear it well, but i can't answer calls. i dont hear anything on it. Did someone managed to solve this?
Only the urbane 2 can use an earpiece for calls, and even then only when the watch is not bt paired with a phone.
Even with the hwatch and zen2, the phone uses the watch as an earpiece, and you can't pair an earpiece to an earpiece. You'll need to have your earpiece paired with the phone.
sirrelevant said:
Only the urbane 2 can use an earpiece for calls, and even then only when the watch is not bt paired with a phone.
Even with the hwatch and zen2, the phone uses the watch as an earpiece, and you can't pair an earpiece to an earpiece. You'll need to have your earpiece paired with the phone.
Click to expand...
Click to collapse
I have a LG G3 phone and a sony smartwatch 3. Is there a way to answer calls while i am connected via BT to the watch? .The watch shows that it is connected to th earpiece. I do hear music from watch but not calls
In order to answer the calls on your earpiece, it has to be paired and connected directly to phone. Our watches does not support calling nor streaming calls from the phone to the earpiece. Streaming musing from the watch to the earpiece was mainly "invented" for the sportsmen so their phones may be left at home and they could just go and exercise outside with the music being streamed from the watch to the earpiece. But you're still paired with the watch, not the phone which is, well, that main unit that make a call.
So no, there's no way to answer calls when your earpiece is connected to the watch, not the phone.
hi all,
after 3 years of use, I decided to upgrade my GearS2 to the new Galaxy watch. One of main advantages for me was the possibility of running without carrying a phone : I can use samsung health and music locally stored an the watch, together with my Jaybird run headsets.
the problem is I cannot get the voice messages on my headsets if the music is on : i get the notification beeps, every km the music pauses as programmed, but no voice can be heard.
Using watch speaker, app works fine and voice is played over music. Using car BT, it also works fine. Even on my Gear S2, app and BT headsets work fine, voice is correctly mixed over music.
I have re-paired and hard reset headsets and watch few times without success, and all notification and TTS are active. I even contacted jaybird support but they did not want to help (they blamed the app).
any hint about a possible solution ??? the most annoying thing is I cannot understand the problem...
thanks for your help!!
PL
On your watch, go to Settings -> Connections -> Bluetooth -> BT Headset. Click on the settings icon for your headset. Make sure "Use For" for Call Audio and Media Audio is enabled.
Hello,
Please help me to solve this, otherwise this Watch thing is useless for my needs.
I have Watch Active 2 LTE [dont use LTE, nor have eSim on my current provider, got it since it was almost same price and had more RAM]
The watch synced with BT to ROG Phone 2.
I have Bluetooth headset that synced to Watch 2, i copied my Aduoibooks to the watch and listen to them from the watch, it works but low volume.
In Watch BT settings the Call Audio and Media Audio is ENABLED
BUT the moment I call to someone from my watch or someone calls me, I get Audio trough Watch speaker and watch microphone used as input.
When I open Bluetooth settings [during the call] the Call Audio and Media Audio automatically got disabled, and it stays disabled until i finish the call and press PLAY on the music player.
Maybe this is NORMAL and smart watches dont route call audio to Bluetooth headsets since audio goes from the phone to the watch and from the watch to the headset?
I tested bunch of different headsets, its all the same behavior
Please help, Thanks
Guy's anyone? Is it even possible?