When pressed volume up and down key together and connected to pc it shows charging symbol then appears in my pc as qualcomm 9008 port then reboots .I'm trying to flash my device using qfil which needs phone to be in edl mode and my phone is not staying at edl mode so I can't flash it .Any advice will be really helpful.
Related
I tried using FlashFire to flash a zip and my device now seems to be bricked. The screen is stuck black and when plugged into the computer, it shows up as "Qualcomm HS-USB QDLoader 9008" which means I can't get to even fastboot to use the unbrick tool.
Other sites say you can use the QFIL tool with a programmer and XML files but the fastboot unbrick tool doesn't include these so I'm stuck. Anybody have any ideas on how to get them or fix it otherwise?
I'm not sure about the Robin, but on a tablet that I had you could power down by holding Power for 15 seconds then waiting about 30 seconds then powering it back up and it will load normally. Hopefully this helps.
i am sorry but i have searched a lot but i couldn't unbrick my ZUK Z2, i flashed the Deodexed stock ROM and then the screen went all black with the LED glowing. If i press the power button i just see the ZUK logo and the screen goes black, i tried to boot it into fastboot but no luck. I somehow managed to get into the 9008 mode but while flashing with QFIL i get the sahara error saying unable to read header or something and with MiFlash i am getting "cannot read hello packet"
Any Help will be appreciated
EDIT:
The device has been fixed, i had to press the download button on the QFIL as soon as my phone boots into EDL mode.
did you flash through twrp? and if your bootloader if unlocked then you should have 5 sec bootloader placeholder from where u can reboot recovery . and if you are stuck into something different then it will be difficult to recover but possible. for sahara fail , play with settings in qfil like emmc, reset ,etc and try.And you can remove the port from device manager and retry if u r getting 9008 port.You should not get sahara fail. You will be get out of this easily just try things suggested. Your device is live as zuk logo is showing so dont worry.
And use latest qfil: http://www.androidbrick.com/download/download-latest-qualcomm-flasher-qfil-qpst-2-7-460/#
EDIT: Try this too-
Bootloader mode: shutdown state, press and hold the volume plus key + volume minus key, while the usb line connected to the computer until the release button.
Qualcomm QPST (9008 port) : shutdown state, press and hold the volume plus key, press the power button at the same time usb cable to connect the computer. This mode is a black screen state.
For recovery: press and hold the power key + the volume plus key + the volume down key until you release the release button.
Just buy DFC cable a.k.a Deep Flash Cable. The cable is same as you wire cable manualy
Kalp3sh S1NGH said:
i am sorry but i have searched a lot but i couldn't unbrick my ZUK Z2, i flashed the Deodexed stock ROM and then the screen went all black with the LED glowing. If i press the power button i just see the ZUK logo and the screen goes black, i tried to boot it into fastboot but no luck. I somehow managed to get into the 9008 mode but while flashing with QFIL i get the sahara error saying unable to read header or something and with MiFlash i am getting "cannot read hello packet"
Any Help will be appreciated
Click to expand...
Click to collapse
Onces that you are in 9008 mode you need to use ADB
"Adb reboot edl"
You are a lucky guy, i needed to conect grenn and black cable of the smartphone to put in 9008 mode
ozi87 said:
Onces that you are in 9008 mode you need to use ADB
"Adb reboot edl"
You are a lucky guy, i needed to conect grenn and black cable of the smartphone to put in 9008 mode
Click to expand...
Click to collapse
So i plug my phone in 9008 mode and go straight to adb?
Kalp3sh S1NGH said:
So i plug my phone in 9008 mode and go straight to adb?
Click to expand...
Click to collapse
Have you both any idea about adb! Edl is itself 9008 mode also called download mode. Adb is debug bridge and it is used in OS to control it by this bridge from PC.
pixel0 said:
Have you both any idea about adb! Edl is itself 9008 mode also called download mode. Adb is debug bridge and it is used in OS to control it by this bridge from PC.
Click to expand...
Click to collapse
yes exactly, that's why i asked.
pixel0 said:
did you flash through twrp? and if your bootloader if unlocked then you should have 5 sec bootloader placeholder from where u can reboot recovery . and if you are stuck into something different then it will be difficult to recover but possible. for sahara fail , play with settings in qfil like emmc, reset ,etc and try.And you can remove the port from device manager and retry if u r getting 9008 port.You should not get sahara fail. You will be get out of this easily just try things suggested. Your device is live as zuk logo is showing so dont worry.
And use latest qfil: http://www.androidbrick.com/download/download-latest-qualcomm-flasher-qfil-qpst-2-7-460/#
EDIT: Try this too-
Bootloader mode: shutdown state, press and hold the volume plus key + volume minus key, while the usb line connected to the computer until the release button.
Qualcomm QPST (9008 port) : shutdown state, press and hold the volume plus key, press the power button at the same time usb cable to connect the computer. This mode is a black screen state.
For recovery: press and hold the power key + the volume plus key + the volume down key until you release the release button.
Click to expand...
Click to collapse
I think the bootloader is locked again, i can't boot into recovery. I tried the latest QPST and still getting unable to read packet header read 0 bytes error and Sahara Failed.
Kalp3sh S1NGH said:
I think the bootloader is locked again, i can't boot into recovery. I tried the latest QPST and still getting unable to read packet header read 0 bytes error and Sahara Failed.
Click to expand...
Click to collapse
If bootloader is locked or unlocked , 9008 mode will work for sure. Also Use buttons combination to enter fastboot if u can then unlock and flash recovery from there .
To avoid this problem again, when you flash stock roms after using Custom Roms, make sure you format the System, data and cache partitions back to EXT4 format, since Stock firmware (even the moded ones) DOES NOT support any other System/Data/ Cache format.
After loading the bootloader, the phone will end with black screen and white led on. You just need to reboot on recovery again and advance format System/ Data/ Cache back to EXT4, connect the phone to the PC again, transfer the ROM file to the internal storage and make the Flash again...
Hope this help you
Hello,I recently flash a wrong file and now my device is straight up dead no logo nothing the led blinks for a mini second and turns off I tried using qfil and mi flash but it was getting detected as 900e port and wasn't even detected on mi flash I tried updating drivers and got it to 9008 but still it would get stuck forever when I hit download asap in qfil or would show some sahara port error and still no detection on mi flash even in 9008 mode I tried over 50+ times using the button combinations to get it to 9008 mode but every time it would be 900e any solution other than deep flash as I have just one type c cable and I may screw up
Press volume up key for 15 seconds, then press power button & insert usb (within a second) to pc..it will get it to edl mode..
probably your only way out is deep flashing, i've been through this
any solution for this ? i'm suffering the same
Hello,
My Note 5 AI randomly gets hanged!!!!! no way to turn it off/on again, I tried all possible buttons combinations without success. Have to wait until the battery discharges completely.
Once plugged to my PC, I found out that, in fact, my phone went into EDL mode (Qualcomm HS-USB QDLoader 9008)……If I push the power button for about 15s the phone disconnects from my PC but reconnects again after 5s and still in EDL mode !!!!!
So, What I can say for now is:
1. For some reason, my phone goes randomly into EDL mode bootloop.
2. Doesn’t seem to be a software issue (tried both, stock and custom Rom)
3. The only way to boot the phone normally is to wait until the battery discharges.
I did a lot a lot of web searching before posting, no one seems to have the same issue.
Waiting for your help, Thanks
i did a big mistake..i flashed redmi 6 pro rom to my a2 lite ..now nothing is happening...edl mode/fastboot mode is not accessing.i also show my phone to a service center. thaaaay just **** me they breaak my fingerprint reader.......help me to boot my phone i have to brought a back-part with finger print reader.please help me
absigma said:
i did a big mistake..i flashed redmi 6 pro rom to my a2 lite ..now nothing is happening...edl mode/fastboot mode is not accessing.i also show my phone to a service center. thaaaay just **** me they breaak my fingerprint reader.......help me to boot my phone i have to brought a back-part with finger print reader.please help me
Click to expand...
Click to collapse
Flash a proper stock rom, if you have a Mi A2 Lite phone through EDL mode this will revert a normal brick.
EDL mode is ever accesed, it might happen that device doesn´t start any kind of transfering data process through EDL, this means that your device is hard bricked in a way that motherboard can´t receive data so it´s damaged at hardware level but to prove this you have to first install the proper Qualcomm HS-USB qdloader 9008 drivers and see how is detected through device manager, it could be detected as Diagnostics 9006 with a warning symbol and then you have to update drivers, restart pc and re-start the process.
If then of bypass properly all the failures that XiaoMi flash tool can produce doesn´t work then the damaged was more serious.
If you unlocked previously (I guess you did it) then you can enter to EDL from a power off by holding both volume buttons at same time that you connect with pc -you have to first start the app and load the image- if device enters to EDL mode but the tool is not recognicing it the led light will stay on BUT if you entered correctly to EDL mode and also the tool is properly recognicing it (so the drivers were well updated) then the led light will flash intermitently.
At time to connect to pc in the mentioned steps you have not to receive any vibration just a sound from your pc.
In few words search in Google : test point mi a2 lite and do it
SubwayChamp said:
Flash a proper stock rom, if you have a Mi A2 Lite phone through EDL mode this will revert a normal brick.
EDL mode is ever accesed, it might happen that device doesn´t start any kind of transfering data process through EDL, this means that your device is hard bricked in a way that motherboard can´t receive data so it´s damaged at hardware level but to prove this you have to first install the proper Qualcomm HS-USB qdloader 9008 drivers and see how is detected through device manager, it could be detected as Diagnostics 9006 with a warning symbol and then you have to update drivers, restart pc and re-start the process.
If then of bypass properly all the failures that XiaoMi flash tool can produce doesn´t work then the damaged was more serious.
If you unlocked previously (I guess you did it) then you can enter to EDL from a power off by holding both volume buttons at same time that you connect with pc -you have to first start the app and load the image- if device enters to EDL mode but the tool is not recognicing it the led light will stay on BUT if you entered correctly to EDL mode and also the tool is properly recognicing it (so the drivers were well updated) then the led light will flash intermitently.
At time to connect to pc in the mentioned steps you have not to receive any vibration just a sound from your pc.
Click to expand...
Click to collapse
i cant access fastboot but it is connecting to edl mode but not getting flash.when its connect a sounds on pc but when not properly not in edl the notification light blinking.please help me.
Os_Herdz said:
In few words search in Google : test point mi a2 lite and do it
Click to expand...
Click to collapse
tnx bro but i know testpoint and i used that when my phones bootloader locked
SubwayChamp said:
Flash a proper stock rom, if you have a Mi A2 Lite phone through EDL mode this will revert a normal brick.
EDL mode is ever accesed, it might happen that device doesn´t start any kind of transfering data process through EDL, this means that your device is hard bricked in a way that motherboard can´t receive data so it´s damaged at hardware level but to prove this you have to first install the proper Qualcomm HS-USB qdloader 9008 drivers and see how is detected through device manager, it could be detected as Diagnostics 9006 with a warning symbol and then you have to update drivers, restart pc and re-start the process.
If then of bypass properly all the failures that XiaoMi flash tool can produce doesn´t work then the damaged was more serious.
If you unlocked previously (I guess you did it) then you can enter to EDL from a power off by holding both volume buttons at same time that you connect with pc -you have to first start the app and load the image- if device enters to EDL mode but the tool is not recognicing it the led light will stay on BUT if you entered correctly to EDL mode and also the tool is properly recognicing it (so the drivers were well updated) then the led light will flash intermitently.
At time to connect to pc in the mentioned steps you have not to receive any vibration just a sound from your pc.
Click to expand...
Click to collapse
now showing in mi flash as COM6 but when try to flash is says ''cannot read from COM6" help me
absigma said:
now showing in mi flash as COM6 but when try to flash is says ''cannot read from COM6" help me
Click to expand...
Click to collapse
How is detected under device manager? qualcomm-HS-USB qdloader 9008? Also what about behaviour of led light, it stays on all the time or it blinks?
Edit: Now I read your previous post, Led light has to blink, this is correctly connected, see under device manager how it is detected.
SubwayChamp said:
How is detected under device manager? qualcomm-HS-USB qdloader 9008? Also what about behaviour of led light, it stays on all the time or it blinks?
Click to expand...
Click to collapse
connected as qualcomm-HS-USB qdloader 9008 in device manager & the notification light is off when not in edl mode that time notification light blinks
absigma said:
connected as qualcomm-HS-USB qdloader 9008 in device manager & the notification light is off when not in edl mode that time notification light blinks
Click to expand...
Click to collapse
Ok, Behaviour changes depending on what rom you actually are, it´s mean that now you have flashed some partitions from Miui rom (led light will stay off) at least it´s being detected.
Things that you can try:
- Move the rom to the same folder where XiaoMi flash is.
- Rename the folder as short as better like "xiaomi" without quotes.
- Put your Windows in "Test Mode", restart to changes take effects.
- Switch to other version of the tool, it worked for me latest from here https://xiaomifirmware.com/downloads/miflashpro/
- Try with other rom version.
absigma said:
connected as qualcomm-HS-USB qdloader 9008 in device manager & the notification light is off when not in edl mode that time notification light blinks
Click to expand...
Click to collapse
i mconnect the battery now qualcomm-HS-USB qdloader 9008 in device manager & notification is blinking
absigma said:
i mconnect the battery now qualcomm-HS-USB qdloader 9008 in device manager & notification is blinking
Click to expand...
Click to collapse
Don't worry about led behaviour, your device will turn a bit weird cause you flashed a wrong firmware, the important here is that it's recognised by pc. What about the steps, tried?