I unlocked the bootloader, installed twrp, wiped all data cause phone wasn't booting, reinstalled latest stock rom, installed "Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip" cause phone wasn't booting. Then the phone booted, but during setup, it got stuck on "checking for updates..." What do I do?
Ps: i'm a noob.
Related
Hello All,
My Device is SGH-M919...Rooted and was running Cyanogenmod 13.
Last week something went wrong (no idea what happened, but phone went black screen and when rebooted it just stays in boot loop)...Tried to went to recovery to clear cache and format so that i can start over, but it never boots into recovery....So, i re flashed TWRP (which i had earlier), but no joy...
So i decided, to flash the stock ROM and start all over again (not worried of backup as i have daily backup of my calls, sms, pics, videos etc)...
Tried flashing stock via ODIN, it shows succesful, but it still is in boot loop...it just shows the Samsung logo and restarts.....Tried to went to Recovery, but its not booting into Recovery, But am able to goto the Download mode and ODIN recognizes my device...
What am i doing wrong or what am i missing in the whole process of recovering my phone...
Any help is much appreciated.....
Note: I already moved to Moto X Pure, but still miss my S4....
Did you boot to stock recovery and perform a factory wipe before booting the stock rom for the first time?
Hi guys,
Need a bit of help. I was scrolling through Instagram when the phone froze, restarted, and now it just keeps restarting without being able to get past the Google logo. It did get to the colored dots ONCE after powering it down completely from bootloader. I was on stock 7.0 (but August or September security update), stock kernel, but rooted with SuperSU 2.76 and TWRP 3.0.2-1. I just downloaded the factory image and flashed the bootloader, boot, vendor, cache, system (radio is the same), and TWRP 3.0.2-1 and it's doing the exact same thing. I can't even boot into TWRP, it bootloops at the Google logo just the same. EDIT: I was able to get into TWRP once but the phone froze again and rebooted!
I would really like to recover my data partition if at all possible. Please help!
EDIT: I put it in the freezer for half an hour and when I took it out it was able to boot again. Copying my stuff now. Will update when it inevitably breaks again...
EDIT2: Once it warms up it freezes and starts to go into a bootloop again. Damn, most likely a hardware issue.
I tried to update to the latest update to the Razer Phone and was able to install it successfully, but when I went to install Magisk on the new update, it caused the Wifi to stop working. For that reason, I tried to restore my old TWRP backup I made prior to updating which everything was working before updating. I wiped cache, dalvik, data and system and restored my old backup. Now when I try to boot, it gets stuck at the Razer logo and doesn't get past that. I also tried wiping data and restoring the system image only to no avail and it didn't do anything.
Have you tried booting to TWRP and booting The other [email protected]
How long did you wait on the Razer logo.. When I reset my phone after relocking it.. It took 10+min for first boot. I was scared it wasn't gonna work but I just left it alone and it eventually booted itself up
mikeandjaimie said:
How long did you wait on the Razer logo.. When I reset my phone after relocking it.. It took 10+min for first boot. I was scared it wasn't gonna work but I just left it alone and it eventually booted itself up
Click to expand...
Click to collapse
Thanks. I'll try that and see if it works. But I let it sit for 5 or so minutes.
Edit: I'll go ahead and add it was stuck at the Razer logo. It never got to the actual boot animation.
Edit 2: I let it sit for 20+ minutes and it wouldn't boot or get past the Razer logo.
RUNNERX said:
Have you tried booting to TWRP and booting The other [email protected]
Click to expand...
Click to collapse
Yes I've tried switching slots and it didn't work.
Any luck with the stuck at logo screen? I followed instructions from Razer and fkashall and now it won't boot to recovery download or system . It just hangs at the logo screen for better part of 2 hours now so it's not a waiting game .. any luck in fixing yours?
hi there, same here after flashing google pixel experience on razer phone1. seems to be a general problem for many users. Any hints?
Best regards
Michael
I have the same problem, but I wasn't updating or installed any new app. I was just ordering food from an app and then all of a sudden my phone restared and got stuck in a bootloop.
I reflashed the stock rom, over and over, slot a or slot b, hoping that would fix it somehow... it's just stuck there now. I could go into download mode and recovery mode. but, it's only until there.
now it's bootloop until it gets into download mode...
ThatGuy94 said:
I tried to update to the latest update to the Razer Phone and was able to install it successfully, but when I went to install Magisk on the new update, it caused the Wifi to stop working. For that reason, I tried to restore my old TWRP backup I made prior to updating which everything was working before updating. I wiped cache, dalvik, data and system and restored my old backup. Now when I try to boot, it gets stuck at the Razer logo and doesn't get past that. I also tried wiping data and restoring the system image only to no avail and it didn't do anything.
Click to expand...
Click to collapse
I could fix it. After flashing (even Android Pi) you have to do a factory reset.
IMPORTANT: THE FACTORY RESET IN TWRP DOES NOT WORK. So you have to flash the boot-sector in your system partition with the stock boot.img and reset to STOCK RECOVERY by typing "fastboot reboot" and pressing the vol-up button. Once in stock recovery, do a factory reset and return to bootloader. Now you can flash the boot.partition with twrp boot.img, install in recovery the stock boot.img, install the twrp-installer.zip and reboot to system. The bootlogo will not stuck anymore.
I hope, I could help you. Do not forget to backup before trying.
Best regards
Mellus
sry for my bad english
I unlocked my bootloader yesterday, installed TWRP 3.5, then I flashed Synex os v2.0.1 ( first time installed custom rom) . everything was going perfect according to tutorial video. Finished installing Synex os successfully, then I rebot to system from TWRP. but my phone is stuck on fist page. "Samsung" logo not coming. I did force restart and went to twrp again. Wiped everything. Installed synex again. But same result. Please help me. This is the only phone i have.
zzSHAKIB said:
I unlocked my bootloader yesterday, installed TWRP 3.5, then I flashed Synex os v2.0.1 ( first time installed custom rom) . everything was going perfect according to tutorial video. Finished installing Synex os successfully, then I rebot to system from TWRP. but my phone is stuck on fist page. "Samsung" logo not coming. I did force restart and went to twrp again. Wiped everything. Installed synex again. But same result. Please help me. This is the only phone i have.
Click to expand...
Click to collapse
Before doing all this, My phone was Android10, One ui 2.5, latest Android patch
Hold power + volume down. If that didn't work then hold all the buttons at the same time to enter download mode then flash stock ROM.
/EDIT:
Alright, the thread can be closed. I somehow managed it.
In case someone faces the same issue, I used twrp to dd the sdf files back on the phone which stopped the reboots. After that, just wiped and formatted everything again and reinstalled the ROM.
Hello guys,
I hope you can help me with this issue since I've tried everything I know to fix this problem.
The plan:
Unlocking bootloader, installing TWRP and xiaomi.eu ROM on a new device.
Changing its IMEI with QPTS/QFIL afterwards.
What happened:
Unlocked successfully. Installed TWRP, xiaomi.eu ROM and Magisk.
After pulling the QCN backup and editing the file I pushed it back to the phone what seemed to work.
After rebooting, I noticed that the phone rebooted 5 seconds after showing me the "Enter PIN" screen.
Booted up again and the same thing happened.
I booted into TWRP, wiped and formatted "data", installed the ROM again. The phone started up normally and there was no reboot.
I went back to TWRP and flashed Magisk, the phone crashed again and everytime I boot it up, it immediately reboots after some seconds. Installing Magisk somehow triggers the phone to reboot on its own.
I thought to start over, flashed everything from stock using Mi Flash Tool and the newest China Rom.
After starting up the phone, the issue still exists. This time with this rom there is no difference between installing Magisk or not, the phone always reboots after showing up the miui welcome/setup screen.
Current situation:
The phone boots up Android, reboots after some seconds and goes into fastboot automatically. After the fastboot timeout it again reboots automatically, goes into the OS and crashes again and on and on.
No matter what I do, I can't keep the phone from rebooting.
And since I can't flash Magisk, I have no root.
This means that I can not use root to put the phone into diag mode to restore the original qcn file.
I have backups of the EFS partition and also sdf7/8/9/10 files. I just don't know how to restore them given the current situation.
Thank you very much in advance for your support!
Cheers