Develop Bugs

[Survey] How many of you have experienced the screen peeling problem?

Hi everyone,
I am seriously considering buying the Moto Z2 Force as a replacement of my old Moto X 2014 (I still love it but my screen got a bit shattered one year ago:crying.
The only thing that is holding me back is that screen peeling problem I heard of. So, after reading some threads I would like to see how spread the problem is by proposing you this survey.
In case you had the issue, it would be very useful for me to know how you solved (got a replacement, removed the shutterproof screen protector, ...?)
Thanks a lot!

Here I am, replying to my own survey!
Unfortunately, not as I would like to...
I bought it and on day 2 I noticed this issue https://youtu.be/KfEjQWtvckQ which is how everything starts I suppose...?? So, I think this will be a "In the first month case".
Now I have to think of what to do:
Keep it and wait for it... (what then?!)
Send it back to seller asking for a refund => Buy another model, other brand (It would be really sad though)
Send it back to seller asking for a change with another one (what if the new one will have the same issue?)
Removing somehow the screen protector and the glue (any tutorials? Will it void the warranty?)
Any suggestion is much appreciated
Thanks a lot

I knot sure what that video was suppose to show. But to me it showed nothing of importance.. I have had my z2 Force for about 2 months with no issues.. Use a screen protector or a case with one, and you should have zero issues.

doubledragon5 said:
I knot sure what that video was suppose to show. But to me it showed nothing of importance.. I have had my z2 Force for about 2 months with no issues.. Use a screen protector or a case with one, and you should have zero issues.
Click to expand...
Click to collapse
The video is supposed to show a problem with the shattershield screen where the outer screen protector lense is detached from the inner layer.
Some people on Lenovo forums reported screen peeling issue after experiencing something like the video shows.
On the same forum, some other people claim they had a screen protector on when the peeling started.
Anyway, I contacted Motorola Support and they:
Confirmed that if you remove the outer layer, the warranty is permanently voided for the whole phone... Not good
Suggested me to refer to the seller for a substitution since I am in the first two weeks after buying the phone
Still deciding what to do...

I tried the tempered glass screen protector I ordered.
It doesn't adhere correctly on the top of the screen but especially on the bottom, near the fingerprint scanner.
So, the screen is not perfectly flat.

kir89 said:
I tried the tempered glass screen protector I ordered.
It doesn't adhere correctly on the top of the screen but especially on the bottom, near the fingerprint scanner.
So, the screen is not perfectly flat.
Click to expand...
Click to collapse
I purchased a Otter Box Defender, and that might be why I have no issues.. On my G5 Plus I had a Otter Box commuter and a screen protector and they worked well as well.. If your nervous about that pone, best bet might be to replace with a different model.. I sure as hell would. Good luck.

kir89 said:
Here I am, replying to my own survey!
Unfortunately, not as I would like to...
I bought it and on day 2 I noticed this issue
which is how everything starts I suppose...?? So, I think this will be a "In the first month case".
Now I have to think of what to do:
Keep it and wait for it... (what then?!)
Send it back to seller asking for a refund => Buy another model, other brand (It would be really sad though)
Send it back to seller asking for a change with another one (what if the new one will have the same issue?)
Removing somehow the screen protector and the glue (any tutorials? Will it void the warranty?)
Any suggestion is much appreciated
Thanks a lot
Click to expand...
Click to collapse
Have the same issue and can hear that. But it seems to be normal. I can push in the screen a little bit. I think it's not the original foil of the top, which is pelling. I think it's hearable because it's plastic and elastic. I can see (by screen on) that's not the foil while I'm pressing the screen in. It's more the complete screen. Would it be the foil, I wouldn't see what I see by pushing in the screen. Plastic is easly elastic. That's all.

Here is an update.
Yesterday I received the other plastic screen protector I ordered.
It fits perfectly, since it's not as rigid as glass.
Since many of you have the same "clicking" noise while pressing the screen, I think I will try to use it in the next days to see how it goes. I have some weeks to think about keeping it or sending it back to the seller.
Hope everything will be ok, I'll keep you updated

kir89 said:
Here is an update.
Yesterday I received the other plastic screen protector I ordered.
It fits perfectly, since it's not as rigid as glass.
Since many of you have the same "clicking" noise while pressing the screen, I think I will try to use it in the next days to see how it goes. I have some weeks to think about keeping it or sending it back to the seller.
Hope everything will be ok, I'll keep you updated
Click to expand...
Click to collapse
It's not the foil, right? That's the plastic which is"clicking". I'm short-sighted and I'm pretty sure that I can see that's just elastic at the bottom. Looks so that the foil is ok and 100% save on the screen. But it's nice to have a elastic screen :laugh: No scratches after month. So, don't need a screen protector. The quality seems good. It's like wings of a airplane. Elastic, too And there is all ok, too. Normally

allrightlite said:
It's not the foil, right? That's the plastic which is"clicking". I'm short-sighted and I'm pretty sure that I can see that's just elastic at the bottom. Looks so that the foil is ok and 100% save on the screen. But it's nice to have a elastic screen :laugh: No scratches after month. So, don't need a screen protector. The quality seems good. It's like wings of a airplane. Elastic, too And there is all ok, too. Normally
Click to expand...
Click to collapse
I am not sure it's the foil or not... However, I don't think is the screen which is moving, that's probably more a refraction effect. We should ask to those that removed the protection layer, if they where experiencing this and after the removal it stopped.
Foil or not, if the "clicking" sound is so common even in devices without peeling issues, I will give it a try.
I just need to use it, only time will say if it was a good idea to keep it :fingers-crossed:

kir89 said:
I am not sure it's the foil or not... However, I don't think is the screen which is moving, that's probably more a refraction effect. We should ask to those that removed the protection layer, if they where experiencing this and after the removal it stopped.
Foil or not, if the "clicking" sound is so common even in devices without peeling issues, I will give it a try.
I just need to use it, only time will say if it was a good idea to keep it :fingers-crossed:
Click to expand...
Click to collapse
Screen is moving down at the bottom, for me it's 100% so. And if I do it carefully, I can see it without hearing it. But yes, would be nice if anyone can test it without the foil. But, I can trust what I see, all real. So, it's the plastic. Hope anyone else can confirm this.
Another problem, what I have seen. I have burn in at the bottom. The navigation buttons keeps/burn in. Now I have set up the moto fingerprint navigation and it should gone next time. And that's really good. Works very well. And the space of the screen is now bigger, nice effect.
But, good to know with the burn in. This smartphones are made for a short time, maybe 2 years. On my computer monitor I have never seen burn ins like that. So, it's a market/business. Screen not made for working over years
And what really is very very good is the battery. Have last time good 8.5-9h sot. So, that's better than many people think.
But back to the screen. That's the topic here. Maybe we have to bring it to the repair center after 1.5 years. Maybe because burn ins, peeling and so on. We will see

If you guys do the warranty replacement through Motorola and not your carrier they will send you a new moto z2 force with a 2nd gen screen if you ask em about it. They have a fix for it lol I just got mine back and it's totally different

ninjakira said:
If you guys do the warranty replacement through Motorola and not your carrier they will send you a new moto z2 force with a 2nd gen screen if you ask em about it. They have a fix for it lol I just got mine back and it's totally different
Click to expand...
Click to collapse
Ok, maybe I have a newer one. Here no scratches after months. Foil ok. Just the clicker at pushing. You don't hear that on your device? Which versions are 2. generation, after which produce date?

allrightlite said:
Ok, maybe I have a newer one. Here no scratches after months. Foil ok. Just the clicker at pushing. You don't hear that on your device? Which versions are 2. generation, after which produce date?
Click to expand...
Click to collapse
What am I supposed to be hearing on my device lol? And idk I just personally call it a 2nd gen screen cause it's easier to explain it like that to the people that I live around in my area ??there not to bright lol. I do know it's not the original shatter screen stuff that was peeling. it honestly was pretty hard for me to understand what my moto agent was saying to me when he explained it so I only caught bits and pieces. My model number is still xt1789-04 TMobile variant. I don't have a clicker also

General Hairline crack, inner screen, feels like screen protector.

Anyone else have hairline cracks on the fold of the inner screen? Mine feel like they are on the screen protector, my screen display is fine. Anyone else experiencing this?
Talking to support now, supposed to take to an authorized repair place. They say it covered by warranty due to normal use causing the cracks. Being sent to an authorized Samsung repair place.
Just inconvenient.

Adhesive failure. Probably due to excessive stretching of the plastic protector during assembly.

blackhawk said:
Adhesive failure. Probably due to excessive stretching of the plastic protector during assembly.
Click to expand...
Click to collapse
Likely, but luckily it's covered by the warranty.

dirtybudha said:
Likely, but luckily it's covered by the warranty.
Click to expand...
Click to collapse
Did you end up getting this fixed under warranty? Mine did the same thing (and the entire screen protector along the fold ripped up all at once).
I did a chat and they told me to take it in to get it fixed, but I'm curious as to what they'll do.

Squeaky369 said:
Did you end up getting this fixed under warranty? Mine did the same thing (and the entire screen protector along the fold ripped up all at once).
I did a chat and they told me to take it in to get it fixed, but I'm curious as to what they'll do.
Click to expand...
Click to collapse

Squeaky369 said:
Did you end up getting this fixed under warranty? Mine did the same thing (and the entire screen protector along the fold ripped up all at once).
I did a chat and they told me to take it in to get it fixed, but I'm curious as to what they'll do.
Click to expand...
Click to collapse
Yes I did. They sent me to a certified repair shop.
They essentially replace the whole interior screen. The process worked, but the guys at the location were not that knowledgeable. We plugged it into a computer and it didn't see the USB access. Once I got it home, it worked on my computer. Who doesn't have the drivers for a device that they repair?
Anyway, it works great now.

That's good to hear it worked out for you. My inner screen also failed in the same manner with hairline fractures and black line down the middle turning it in to a Microsoft Duo. I've been on the phone with Samsung three separate times and have had nothing but resistance from them. They sent me to a local repair shop and the manager told me I must have gotten a piece of sand in the hinge or something....huh? He said go ahead and start a claim, but the final word was with him. He also said he got rid of his Fold 3 because he didn't want the same thing to happen to him. So there's definitely a problem with some of the units out there. I'll be sending mine to Samsung soon. I have no confidence that Samsung will actually cover this under warranty in my case due to the treatment I've received from their customer service. It's upsetting.

What a bummer... I got my phone Sept 24, and now on March 24, I just noticed that I have a small crack right where the phone folds. I am going in to Verizon tomorrow. The "Samsung Care+" wanted me to send it in with $249... This is definitely a warranty issue.

I went to my local corporate Verizon store this morning. They will treat it as warranty and my replacement phone arrives tomorrow. The area manager was there, took pics of the screen, and the phone to document current condition (which I appreciate) before approving the swap. Plus she says they are monitoring how many come in like this. Mine wasn't the first. They suspect, like many here, that it's the screen protector. (I guess the Flip 3 has issues too, but my daughter has one that is so far so good).
Now, as long as Verizon doesn't declare my phone as "damaged" by me it will be a free swap. If not, they'll try to bill me. But the area manager agrees that it looks like a defect (and it really is a defect).
One last gripe: I guess I was too eager to get my Fold 3 to realize that the "protection plan" carries a potential $249 fee for a broken screen. Thank goodness this is a defect.

emtownsend said:
. They suspect, like many here, that it's the screen protector. (I guess the Flip 3 has issues too, but my daughter has one that is so far so good).
Click to expand...
Click to collapse
do you mean that they suspect the screen protector is broken or that the screen protector is causing the UTG screen to break?

The thought was that the screen protector is cracking, but not the screen. I've not lost any functionality over the area that is "cracked".

Yeah, when I ran my finger nail over the cracks it would snag. It was absolutely my screen protector...which is factory installed and therefore falls under the manufacturer.
Yes, I think this will be an issue. I don't think this will totally kill the market or much of the sales. My replacement is still going strong, and I haven't heard too many others experiencing the cracks.
I'm sure the Fold 5 will have it all together. Hahaha

100% screen protector, I just replaced mine myself and small crack in the crease is gone!

Yeah, my nail would catch on it. At least it's not the screen...oy. That would be a nightmare.

Checked online, there is a few threads on the Sammy forums, and removing the inner screen protector does NOT void warranty. If the display/screen is damaged in the process, then iti is void.
My replacement protector, OEM, got it's first hairline crack. Gonna remove the OEM one and replace it myself. That way I can just replace it when it goes bad.
NOW I'll say I wouldn't recommend this phone to anyone because of this issue. Samsung failed here, but there's a chance to learn from it and improve it.

dirtybudha said:
Checked online, there is a few threads on the Sammy forums, and removing the inner screen protector does NOT void warranty. If the display/screen is damaged in the process, then iti is void.
My replacement protector, OEM, got it's first hairline crack. Gonna remove the OEM one and replace it myself. That way I can just replace it when it goes bad.
NOW I'll say I wouldn't recommend this phone to anyone because of this issue. Samsung failed here, but there's a chance to learn from it and improve it.
Click to expand...
Click to collapse
getting the same OEM Samsung screen protector was a bad decision and you should've known that already since it broke once. Samsung's screen protector is an ultra thin plastic layer that's why it breaks. I removed it myself and knew its nature. That's why I installed the Whitestone Dome Film instead (myself) and this protector is elastic and bends easily with the fold. You get definately no cracks because it's a film layer.
try it and you won't regret it. By the way it's so easy to install, and costs only $10- $15

A: How should I have known?? They could have replaced it with better materials.
B: Thanks for the insight into the Whitestone Dome.

Question Inner screen protector coming up

My inner screen protector has started coming up right along the crease. It started just at the edge and has started going down along the fold for the last week or so. Has anyone else had this problem? I was thinking I would probably get one of the WD replacement ones and swap them out. I'd probably have someone do it for me so I don't mess it up. Anyone else experience this and is that the best screen protector to get?

pside15 said:
My inner screen protector has started coming up right along the crease. It started just at the edge and has started going down along the fold for the last week or so. Has anyone else had this problem? I was thinking I would probably get one of the WD replacement ones and swap them out. I'd probably have someone do it for me so I don't mess it up. Anyone else experience this and is that the best screen protector to get?
Click to expand...
Click to collapse
Pretty common I think, lots of posts around Reddit about it etc. Whitestone don't do their glass one anymore but I think their PET one is good for it.

Mine started with a couple bubbles near the middle. Next day worse. Removed it, going without for now and may replace. Reviews on Amazon say they only last so long.

same here

Thanks for the replies. Just glad to know that it is fairly common. I was just going to remove it but I'm too chicken to go sans protector on the inner display.

Same here. It is unnoticed when the screen is on, but when it is of or dark scene, I can see the protector is starting to get loose at the bottom of the crease.

I took mine off and replaced it with the Whitestone Dome Film which is waaay better

Here is my Reddit post on installing the WSD Film:
https://www.reddit.com/r/ZFold3/comments/tji7a9

The reviews on Amazon aren't that great for WSD

catman51 said:
The reviews on Amazon aren't that great for WSD
Click to expand...
Click to collapse
it's not good for the ultra thin glass protector. We used the film protector

Samsung UK ended up replacing my entire screen to fix this...

flakmunky said:
Samsung UK ended up replacing my entire screen to fix this...
Click to expand...
Click to collapse
How did you do this? My screen protector is coming up, so went to their support chat.
After a long conversation, it was determined that the screen protector is a consumable so not covered by warranty or care+ which I have.
I could have an engineer visit, but as its a consumable they would charge £40 to replace.
In the end, the CS advised I remove the screen protector myself. This would not void any warranty.
Then, if I had any subsequent damage, to make a claim on care+

I used the Samsung Members App --> Support and then Text Chat.
I just read through the transcript and I actually started asking about another issue I had, which was that it wouldn't open completely flat and had lost the snap when you close it. I also mentioned in the chat the issue with the screen protector.
I had to send them pictures of the issues, and they arranged for the engineer visit. I got the same messages that it would cost me £40 if there wasn't a fault. When they guy came out he looked at the screen and said that it would need a new screen because "when you remove the screen protector they crack down the middle" which I thought was BS and I asked him if they was really the case. He ended up transplanting the motherboard from my phone into a new chassis with new screens and new batteries.
He said it needed a new screen, I didn't think it did...
As for the phone not opening fully, it wouldn't hold open like it did when it was new, not did it snap open the last 5 degrees when opening. Night and day difference when I got it back. Took about an hour to fix.
Maybe, if yours won't open fully, you could get the same repair done under warranty?

I started asking about the screen protector lifting as I didn't think they were going to do anything about the phone opening fully, as it was only a few degrees away from being flat, so I threw in the screen protector as well to cover my ass for the £40 as I read on Reddit that this was a warranty repair...
I actually thought the screen protector was the reason I got the warranty repair but after reading what you posted, it must have been the folding issue. I've just looked at I've deleted the photos I sent them, but the folding issue was very minor, which is why I thought the screen protector was my ace card.

flakmunky said:
I used the Samsung Members App --> Support and then Text Chat.
I just read through the transcript and I actually started asking about another issue I had, which was that it wouldn't open completely flat and had lost the snap when you close it. I also mentioned in the chat the issue with the screen protector.
I had to send them pictures of the issues, and they arranged for the engineer visit. I got the same messages that it would cost me £40 if there wasn't a fault. When they guy came out he looked at the screen and said that it would need a new screen because "when you remove the screen protector they crack down the middle" which I thought was BS and I asked him if they was really the case. He ended up transplanting the motherboard from my phone into a new chassis with new screens and new batteries.
He said it needed a new screen, I didn't think it did...
As for the phone not opening fully, it wouldn't hold open like it did when it was new, not did it snap open the last 5 degrees when opening. Night and day difference when I got it back. Took about an hour to fix.
Maybe, if yours won't open fully, you could get the same repair done under warranty?
Click to expand...
Click to collapse
Apart from the screen protector coming up (it's only 3-4mm at the moment, but it's getting bigger) the phone has performed and behaved brilliantly. No issues with the hinge or folding/unfolding

I've just been on chat with them as mine has started lifting at the top and bottom of the fold. Was told it's not covered by the warranty, I could send it back to them and they would charge me for it, although couldn't tell me how much and they "might" be able to get it back to me in ten days. I told them I wasn't going to send it back without knowing how long or how much and that's where it ended.

frogdr1ver said:
I've just been on chat with them as mine has started lifting at the top and bottom of the fold. Was told it's not covered by the warranty, I could send it back to them and they would charge me for it, although couldn't tell me how much and they "might" be able to get it back to me in ten days. I told them I wasn't going to send it back without knowing how long or how much and that's where it ended.
Click to expand...
Click to collapse
Yes. They offered me the same - with the same vagueness around timescales.
That's why I asked for an on-site engineer.

m_w_clarke said:
Yes. They offered me the same - with the same vagueness around timescales.
That's why I asked for an on-site engineer.
Click to expand...
Click to collapse
Yep asked for that as well and they said no, I could either go to Stoke or send it in, checking online it looks like we don't have a door repair technician in Yorkshire.

Just an update; in the past 24 hours the bubble/peeling/rainbow effect has reached the whole length of the crease. So this morning, I decided to remove the screen protector.
Still a little nervous of having a naked screen - and at the moment my finger doesn't seem to glide as well on it.
I'll wait and see how things go

I peeled mine off yesterday and fitted the whitestone dome one, went on perfectly much to my surprise, feels great, my mate who has a fold as well commented that the screen looks sharper than his with the original one on.

Question Z fold 3 factory screen replacement warranty contradicts itself

Hello,
I've just waiting on my new Z fold 3 and been reading into these screen protector issues and where we stand when or if they fail.
The startup screen says you can't remove the screen protector as it's part of the screen. Then you go on the Samsung support page and warranty for the phone, and it's says when your screen protector is damaged, the answer is you're able to replace it yourself, if you need any more support contact us ?
So why put the disclaimer on if they are now saying it can be removed and replaced by yourself ? Does this still cause warranty issues ?
Just after clarity before deciding whether to carry on with normal phone insurance or Samsung care +
Any help or experience would be appreciated

Here's what it says

The stock screen protector can be removed from the main screen. I've done it myself and replaced it with a better one since I was getting hairline cracks. There's also postings on Samsung's forums stating that it does not void the warranty to remove the stock screen protector.
The problem that can arise from removing and replacing is damage to the actual display. So they're discouraging it. But in all actuality, you can easily remove it yourself. There's a lot of videos in walkthroughs online.

its not an issue replacing it, just seems like Samsung says one thing and means another. to be honest, I love this phone more than my s22 ultra, so I've bought Samsung care + so between that and the warranty I should be able to use it care free and just enjoy it, because its an amazing bit of technology, and reminds me of the of the first time I saw the original galaxy note ( and bought it)

Mine started lifting up on the fold and Samsung sent a home repair van round. He said it would need a complete new inner screen as you can't remove the protector without the screen cracking. Now I know some here have removed the inner screen protector but I didn't bother pointing this out as I also had an issue with it not folding flat anymore...

flakmunky said:
Mine started lifting up on the fold and Samsung sent a home repair van round. He said it would need a complete new inner screen as you can't remove the protector without the screen cracking. Now I know some here have removed the inner screen protector but I didn't bother pointing this out as I also had an issue with it not folding flat anymore...
Click to expand...
Click to collapse
So was that done under warranty then or care +

I just booked repair to my inner screen protector and that's the information I got. I have care+ and if they charge me for screen protector replacement I will never buy samsung phone again.
Sure, no worries we don't cancel your inspection and repair on your Z Fold 3. It's okay if the symptoms input here is about the broken screen. Just in case that our engineer will include it, to your Samsung care+. It depends on their inspection on your device. Once we have the device and done with the inspection, our engineer wil send you an email regarding the full information. Upon checking here the replacement may not be covered by the warranty and additional costs for replacement will be charged if the screen protector has been damaged.
Click to expand...
Click to collapse

I don't have care+, just the standard warranty... I'm UK based.

flakmunky said:
I don't have care+, just the standard warranty... I'm UK based.
Click to expand...
Click to collapse
Oh okay, that's good to know, I'm UK based too. I took out care + as well so technically there shouldn't be any questions over the phone being repaired or replaced

Question If you're noticing loosening of the screen protector internal screen...

Get that screen protector replaced in an authorized repair center whether or not you have an active warranty.
Don't do any of the following:
don't attempt to replace it yourself no matter how simple it might seem to you
(The repair centers have a rig to assist them in doing this. And if you screw up, you could end up with a more serious problem.)
don't ignore it because it seems trivial or small
don't wait for the problem to "ripen" before acting
if your warranty has expired: don't decide that this doesn't warrant action
Why?
Over the past week or so, the protector started slowly separating down the crease area of the screen. So I brought it in to a local Samsung-authorized UbreakitIFixit by Asurion. The technician said he's seen a flow of these cases. I went a step further and said that I'm hearing that there are a number of people reporting cracked screens. He nodded and said that-- once the protector starts separating like mine was doing-- this starts to create a degree of pressure on the folding area of the screen. Basically he was telling me that what seems like a trivial cosmetic problem could turn into something far more serious. And expensive.
In my case, I bought my Z Fold 3 shortly before it was replaced by the Z Fold 4-- and I am still covered by the warranty. If you are in the same position, Samsung has what I would call a "silent recall" where they will cover a one-time screen protector replacement. Go to the Samsung service area on their website and avail yourself of this!
And if you are past the warranty, I'd urge you to take the precaution and pay to have the protector replaced-- you sure don't want to face a complete screen replacement-- you might not even consider the cost justifiable.

Apparently this is true; if cracked it will eventually take out the display. I was reading a review and that Australian reviewer didn't have kind things to say about this. He gives the protector a 4-6 month lifespan, if you make a year you're lucky.
He further said this has been a persistent issue; don't expect the next generation to be more durable.

Hmm, I have to replace my wife's every 4 months or so using the Orzero. It is a bit of a learning exercise, but not that hard(key it to do long side first and get the fold crease right at the start). YMMV.

xnappo said:
Hmm, I have to replace my wife's every 4 months or so using the Orzero. It is a bit of a learning exercise, but not that hard(key it to do long side first and get the fold crease right at the start). YMMV.
Click to expand...
Click to collapse
Thanks for letting us know that you feel confident doing this yourself. I also see a YouTube demonstration video from the company. I'm not sure that I'd do a neat job but it's good to know that it's possible.
You also opened my eyes to the frequency of replacement that made sense to both of you,

The Whitestone protector comes with a rig so that you place it perfectly right. Only thing you need to worry about is dust getting under it as you're putting it on (some people do it in the bathroom after steaming it up with a hot shower).
My OEM protector lasted over a year. It did separate along the crease at the top and it kept getting longer and longer, so I finally replaced it after months of the separated area. The replacement brought back the anti-fingerprint feature which had worn off the original one, so I was happy about that for sure. Doing it once now, I'll probably replace it next once that anti-fingerprint feature has worn off again since it wasn't as bad/hard as I thought it would be. No need to be intimidated by it after all!

ButterflyFlutterflyMyOhMy said:
The Whitestone protector comes with a rig so that you place it perfectly right. Only thing you need to worry about is dust getting under it as you're putting it on (some people do it in the bathroom after steaming it up with a hot shower).
...
Click to expand...
Click to collapse
ButterflyFlutterflyMyOhMy said:
No need to be intimidated by it after all!
Click to expand...
Click to collapse
I have learned so much on xda-developers.com over the years. The two previous posts are really helpful. I found the Whitestone installation YouTube video and now I see how the jig works. I hope I won't have to replace the screen protector but now I realize a couple things:
It's wise to replace the inner screen protector once separation starts appearing
It's entirely possible to do the job myself if / when the warranty no longer applies.