Related
Hello!
Just purchased a Samsung Galaxy Watch in Dubai. I live in Spain, so I would like to use Samsung Pay in that country. However, I can only configure Samsung Pay as United Arab Emirates. I have read that in order to make it work, I have to flash the specific firmware for the desired location (in this case, Spain) with Odin. I have found some tutorials on how to do that, but I cannot find the appropiate firmware for my device. Here is the info:
Model number: SM-R800
Tizen version: 4.0.0.1
Software version: R800XXU1BRK3
Has anyone done this before? Where can I find the appropiate firmware?
Thanks!
You don't have to flash firmware specific to the desired location, you have to update the csc (also resets the watch) to represent the location you want.
How to: https://forum.xda-developers.com/sm...r805f-csc-change-howto-esim-rsp-v2-x-t3848292
CSC list: https://forum.xda-developers.com/showthread.php?t=2546689
For me, I purchased the international version in the US and Samsung Pay did not work in Sweden, I changed the csc to NEE (nordics) following the guide above and I can now use Samsung Pay in Sweden.
Maybe this attached Video explain "something":
https://forum.xda-developers.com/showpost.php?p=78938105&postcount=726
It is possible with Watch Face to:
A
Verify... check active CSC/Sales Code
B.
Change CSC/Sales Code
Only problem at the moment...
Such Watch Face not in Store... """Security reason"""...
And...
Best Regards
Thank adfree and siwan05 for your kind replies. I was able to change the CSC of my watch without problem. However, it turns out that my bank is not compatible with Pay on Watch (only with Samsung Pay app). Nevertheless, your advice worked perfectly.
Thanks!
I can't get the update to One UI 1.5 announced here, could I change my CSC to other country, update my device and change again to my original CSC?
Make that would disable Samsung Pay in my Galaxy Watch?
How could I check what regions have the latest version of One UI?
Hi for the France... 2020
jordi.badia said:
Thank adfree and siwan05 for your kind replies. I was able to change the CSC of my watch without problem. However, it turns out that my bank is not compatible with Pay on Watch (only with Samsung Pay app). Nevertheless, your advice worked perfectly.
Thanks!
Click to expand...
Click to collapse
How to change csc? I have galaxy watch 46mm SM- R800
I from Malaysia, my watch buy from Australia. Cannot using samsung Pay
Tizen 4.0.0.7
R800XXU1DSL1
Hello friends,
I'm from Brazil and I bought a LTE Galaxy Watch in Germany, exactly the same version (Sm-R805F) used in Brazil. However when I went to my mobile company to activate the e-sim it was not possible. When the system ask to read a QR code, in the mobile networks' activation process, a message of error appears ("It's not possible to conect this mobile"). Does anyone know why and how to fix it?
Can you check this Code...
Code:
*#1234#
Seems DIFFERENT Software crap exists... so different Profiles...
Code:
OXX
OXA
Check your CSC ...
OXA could be inside German Version... and OXX is maybe for Brazil...
Best Regards
adfree said:
Can you check this Code...
Code:
*#1234#
Seems DIFFERENT Software crap exists... so different Profiles...
Code:
OXX
OXA
Check your CSC ...
OXA could be inside German Version... and OXX is maybe for Brazil...
Best Regards
Click to expand...
Click to collapse
Thank you very much!
I did it and the CSC is OXA (German version).
How can I change it to OXX?
PS: I did as they recomended here (https://forum.xda-developers.com/smartwatch/gear-s3/guide-how-to-change-gear-s3-r760-csc-t3784226 ) but theres no Brazilian code nor OXX.
OXX and OXA are """group"""
OXA contains minimum DBT CSC... for Germany
You can NOT change from OXA to OXX... because the config files not inside...
Your Link shows only way to change existing CSC inside flashed CSC file...
Example...
I have Firmware files... from OXX region...
Code:
CSC_[B]OXX[/B]_R805FOXX1BRI4_usr.tar.md5
You can unpack and extract with 7Zip... csc.img file.
Folder preconfig have 8 folderS with 7 CSC... DEF means Default IMHO...
Code:
BRI
TGY
VAU
XNZ
XSA
XSG
XSP
XSP is Singapore...
For the others I am tooo lazy... forgotten... use Google...
I have NO idea if it is an good idea to try to flash with netOdin such CSC files... or complete Firmware of OXX region.
Samsungs funny Security...
Best Regards
Edit 1.
I have tried to identify Brzil via Google search...
For me it looks no CSC inside for Brazil...
I have NO idea if SM-R805F is for Brazil market...
Edit 2.
Okidoki... Google search leads to this:
https://www.samsung.com/br/support/model/SM-R805FZSAZVV/
So looks like exists for Brazil... and you can see Sales Code ZVV it is in Product Code...
Code:
SM-R805FZSA[B]ZVV[/B]
IMHO 3 region groups... OXX OXA and ?
Firmware for Brazil seems not leaked... with ZVV inside...
Edit 3.
Firmware for SM-R805F for Brazil looks like this:
Code:
R805FXXU1CRK7/R805F[B]OWO[/B]1CRK7/R805FXXU1CRK7
So OWO is Region Code... for Brazil...
IMHO OWO package have ZVV Sales Code/CSC inside... for Brazil.
Edit 4.
My fault...
Code:
R805FXXU1DSC7_Tizen_4File_Multi CSC ([B]OWO[/B]).rar
Leaked and available...
But still no idea if this helps you... because dangerous to flash... Sams..g Security could prevent success...
adfree said:
Edit 4.
My fault...
Code:
R805FXXU1DSC7_Tizen_4File_Multi CSC ([B]OWO[/B]).rar
Leaked and available...
But still no idea if this helps you... because dangerous to flash... Sams..g Security could prevent success...
Click to expand...
Click to collapse
Hi,
Can you list the available CSC's within the OWO version ?
I wasn't able to find it for download to check by myself..
@Nocturney
Region OWO Firmware contains these CSC:
Code:
COM
ZTA
ZTO
ZVV
Best Regards
I've been reading the post, but I'm a little lost. I do not know what to do. I have a R815 Vodafone Germany version, and I want to activate it for movistar Spain, but I receive the error "It's not possible to conect this mobile". The data of my watch are the following:
AP: R815FXXU1ARH5
CP: R815FXXU1ARH5
CSC: R815FOXA1ARH5
With the SDB utility I have accessed a hidden menu on the watch and I changed the original CSC VD2 to XEC, or at least I thought so ... I think VD2 is Vodafone Germany, and XEC is Movistar Spain (the company that I have on my mobile phone). Samsung Pay works, but LTE is impossible to configure ("It's not possible to conect this mobile")
It is possible to get a different firmware and flash it?... or how can I get to configure an esim (lte) from movistar españa?
adfree said:
@Nocturney
Region OWO Firmware contains these CSC:
Code:
COM
ZTA
ZTO
ZVV
Best Regards
Click to expand...
Click to collapse
Awesome, Thanks for the info
Hey guys, I was reading this post and I have a problem a little different of you.
I bought a Galaxy Watch from The USA, LTE version (R805U) but I live in Brazil, I went to the phone company (VIVO) to try able the LTE (eSim) function but they said to me that it is impossible because only the R805F works here. My question is. Can I change the firmeware from 805U to 805F and it will works LTE here ?
secawan said:
I've been reading the post, but I'm a little lost. I do not know what to do. I have a R815 Vodafone Germany version, and I want to activate it for movistar Spain, but I receive the error "It's not possible to conect this mobile". The data of my watch are the following:
AP: R815FXXU1ARH5
CP: R815FXXU1ARH5
CSC: R815FOXA1ARH5
With the SDB utility I have accessed a hidden menu on the watch and I changed the original CSC VD2 to XEC, or at least I thought so ... I think VD2 is Vodafone Germany, and XEC is Movistar Spain (the company that I have on my mobile phone). Samsung Pay works, but LTE is impossible to configure ("It's not possible to conect this mobile")
It is possible to get a different firmware and flash it?... or how can I get to configure an esim (lte) from movistar españa?
Click to expand...
Click to collapse
Is not to you to do'it...
You need to call the operatório, in this case, Movistar and subscribe for the service and they activate the eSim...
Sent from my Samsung SM-G975F using XDA Labs
Hi had same problem
Hello mate
I bought Samsung Galaxy watch when I was on holidays in Greece as in UK the LTE version was only with contract on EE. As I'm using Vodafone UK, I got the Qr Code for the esim but Samsung neither Vodafone could help me to make it work. Finally I make It work but my self, because my Samsung Galaxy watch is from Greek region I try to activate my Vodafone uk esim with a Greek sim network in my mobile device and it's worked perfectly, even when I put back my Vodafone uk sin on my mobile.
Hope that helps you.
MrNtrev said:
Hello mate
I bought Samsung Galaxy watch when I was on holidays in Greece as in UK the LTE version was only with contract on EE. As I'm using Vodafone UK, I got the Qr Code for the esim but Samsung neither Vodafone could help me to make it work. Finally I make It work but my self, because my Samsung Galaxy watch is from Greek region I try to activate my Vodafone uk esim with a Greek sim network in my mobile device and it's worked perfectly, even when I put back my Vodafone uk sin on my mobile.
Hope that helps you.
Click to expand...
Click to collapse
Hi, could you elaborate on how you did that? I want to buy the silver LTE version from Hong Kong because that colour is not sold in Singapore, and it would be great if I could get the LTE working.
Rbs_fael said:
Hey guys, I was reading this post and I have a problem a little different of you.
I bought a Galaxy Watch from The USA, LTE version (R805U) but I live in Brazil, I went to the phone company (VIVO) to try able the LTE (eSim) function but they said to me that it is impossible because only the R805F works here. My question is. Can I change the firmeware from 805U to 805F and it will works LTE here ?
Click to expand...
Click to collapse
Sou do Brasil tambem e estou com o mesmo problema e duvida. Vocë conseguiu resolver?
Hey Guys,
The title is pretty self-explanatory, I purchased a Galaxy Watch active from a Hong Kong seller not realising it would stop me from using Samsung Pay. As it is a new model I've only found one copy of the Firmware .MD5 files and the CSC is not the Australian one (which is the country that I live in). Is it possible to change the CSC code and thus the region of the .MD5 file so I can Flash my watch and get it onto the right region and unlock Samsung Pay?
I apologise if this is a stupid or naive question this is all brand new to me and I'm still trying to keep up.
Highpryority said:
Hey Guys,
The title is pretty self-explanatory, I purchased a Galaxy Watch active from a Hong Kong seller not realising it would stop me from using Samsung Pay. As it is a new model I've only found one copy of the Firmware .MD5 files and the CSC is not the Australian one (which is the country that I live in). Is it possible to change the CSC code and thus the region of the .MD5 file so I can Flash my watch and get it onto the right region and unlock Samsung Pay?
I apologise if this is a stupid or naive question this is all brand new to me and I'm still trying to keep up.
Click to expand...
Click to collapse
Hey i found this post https://forum.xda-developers.com/sm...r805f-csc-change-howto-esim-rsp-v2-x-t3848292
It should technically work. Let me know if it does please as i have ordered a galaxy watch import as well (HK to Australia) and only just found this out.
EDIT: Also look at this link https://forum.xda-developers.com/showthread.php?t=2546689 it should provide the right code for the Australian firmware
DX3_Lory said:
Hey i found this post https://forum.xda-developers.com/sm...r805f-csc-change-howto-esim-rsp-v2-x-t3848292
It should technically work. Let me know if it does please as i have ordered a galaxy watch import as well (HK to Australia) and only just found this out.
EDIT: Also look at this link https://forum.xda-developers.com/showthread.php?t=2546689 it should provide the right code for the Australian firmware
Click to expand...
Click to collapse
Hey, sorry for the delay in reply I was able to simply push the change of the region following this tutorial: https://l.messenger.com/l.php?u=https%3A%2F%2Fforum.xda-developers.com%2Fsmartwatch%2Fgear-sport%2Fchanging-region-samsung-gear-sport-r600-t3771324&h=AT3gL1EJTD_LzPupE_pcei82eesT1O0MKpVQZGSgoTro4ovlL9xync975ADDZ67vB2UNTW7C_4dmZ5WRKU3anMSWN8dssfrihNs8SZH3LfhrIVqv-wn2MKbt5fW4K_jCN3hLiObSfgARdyN3SlnrVw no need to fuss about finding the right software or even cracking into the watch it was dead easy and wireless.
Hope this helps!
I've tried the region reset on my SM-R500, but I can't find the Irish (or UK) network providers in the list when doing the reset. I've got a watch that was set to UAE, so I'm guessing that specific firmware doesn't come with Irish regional settings? Any workaround to this? Is it possible to flash a suitable firmware and if so, where would I find the correct firmware?
So there's discussion that if we purchase an International Note 10 or Note 10+ from ebay, we may not be able to use Samsung Pay in the United States. The reason being, the Note will be preloaded with Pay App that's from that region. Had anyone been able to uninstall the pre-installed app and reload the app via apkmirror to get Samsung Pay to work in the US?
Saw a post on the s8 (https://forum.xda-developers.com/galaxy-s8/help/how-add-samsung-pay-to-sm-g950fd-dual-t3600699) which talked about this exact problem. Not sure if it's the same here and if anyone got to work around the region problem. Not talking about U firmware.
twe90kid said:
So there's discussion that if we purchase an International Note 10 or Note 10+ from ebay, we may not be able to use Samsung Pay in the United States. The reason being, the Note will be preloaded with Pay App that's from that region. Had anyone been able to uninstall the pre-installed app and reload the app via apkmirror to get Samsung Pay to work in the US?
Saw a post on the s8 (https://forum.xda-developers.com/galaxy-s8/help/how-add-samsung-pay-to-sm-g950fd-dual-t3600699) which talked about this exact problem. Not sure if it's the same here and if anyone got to work around the region problem. Not talking about U firmware.
Click to expand...
Click to collapse
You have to change the csc code to one of the usa firmwares to use samsung pay
Sent from my SM-N975F using Tapatalk
AlEjAnDrO812 said:
You have to change the csc code to one of the usa firmwares to use samsung pay
Sent from my SM-N975F using Tapatalk
Click to expand...
Click to collapse
If you read that thread, this was not the case. He was able to use it by installing the framework and app for the USA version.
On my own Korean Note 10+ 5g I tried installing the USA apk but it still keeps saying it can't connect to server.
Check if your csc is from a country that Samsung Pay supports, in the same thread someone post the steps for change the csc. Maybe that can make yours work.
Sent from my SM-N975F using Tapatalk
My phone is from Taiwan (BRI) and my previous phone was from Hong Kong (TGY) and Samsung Pay worked fine for both in Canada, right out of the box. I did not change the CSC, etc.
Yeah I don't think that has anything to do with it, given that s8 thread. The OP in that one said he had to sideload the framework and app for USA to work, but I don't see how we could do that since the framework doesn't let me uninstall. As mentioned I tried side loading the USA version of the app from apk mirror but it still failed to connect to server and now tells me I need to use a Korean SIM card to use Samsung Pay.
On my note 8 all the rewards are in Chinese, but it works fine for actually paying for things
waqqas.khokhar said:
My phone is from Taiwan (BRI) and my previous phone was from Hong Kong (TGY) and Samsung Pay worked fine for both in Canada, right out of the box. I did not change the CSC, etc.
Click to expand...
Click to collapse
Hong Kong and Taiwan are supported CSC for samsung pay, you can see the list of country here: https://www.sammobile.com/samsung-pay
---------- Post added at 05:59 AM ---------- Previous post was at 05:50 AM ----------
Kalm_Traveler said:
Yeah I don't think that has anything to do with it, given that s8 thread. The OP in that one said he had to sideload the framework and app for USA to work, but I don't see how we could do that since the framework doesn't let me uninstall. As mentioned I tried side loading the USA version of the app from apk mirror but it still failed to connect to server and now tells me I need to use a Korean SIM card to use Samsung Pay.
Click to expand...
Click to collapse
I have and international version Note10+, buy it from samsung miami, but the firmware installed from factory in the phone was from Panama, Every time I try to launch samsung pay with a US sim card it stucked on the connecting screen. I tried to uninstall and install the usa version, but the youy cant uninstall the framework without root. I change the firmware for one coming from the country that support Samsung Pay and changed the CSC by doing it. Now Samsung Pay works and use to pay at stores.
This is only my experience, maybe you can find another way. It you find it please post it because I want a better solution.
Hope that this post help in some way.
AlEjAnDrO812 said:
Hong Kong and Taiwan are supported CSC for samsung pay, you can see the list of country here: https://www.sammobile.com/samsung-pay
---------- Post added at 05:59 AM ---------- Previous post was at 05:50 AM ----------
I have and international version Note10+, buy it from samsung miami, but the firmware installed from factory in the phone was from Panama, Every time I try to launch samsung pay with a US sim card it stucked on the connecting screen. I tried to uninstall and install the usa version, but the youy cant uninstall the framework without root. I change the firmware for one coming from the country that support Samsung Pay and changed the CSC by doing it. Now Samsung Pay works and use to pay at stores.
This is only my experience, maybe you can find another way. It you find it please post it because I want a better solution.
Hope that this post help in some way.
Click to expand...
Click to collapse
Which model do you have and which country's firmware/CSC did you change it to, to get Samsung Pay to work? This information will save many people from the agony of hunting down functional firmwares for Samsung Pay.
waqqas.khokhar said:
Which model do you have and which country's firmware/CSC did you change it to, to get Samsung Pay to work? This information will save many people from the agony of hunting down functional firmwares for Samsung Pay.
Click to expand...
Click to collapse
Sure, I have the SM-N975F model and I use the firmaware N975FXXU1ASHE from Spain, the CSC is PHE also read that the Italy CSC works.
Hey guys I gave a try to the software Samkey, they have an option to change your csc in a multicsc firmware. For example, I wanted the PCT csc code because is from Puerto Rico(my country) and I knew that Samsung Pay worked with it, so I flashed the firmware N975FXXU1ASH5 with multi-csc OWA N975FOWA1ASH5 because one of the csc is the one I wanted. The default csc in this firmware is CHL from chile(Samsung Pay dont support this country), next I buy 3 credits for Samkey on ebay for $6 and use the option to change the CSC and it worked. Do not needed to factory reset or delete any data. Also the phone do a OTA update and still have the PCT csc code. Hope this help someone.
AlEjAnDrO812 said:
Hey guys I gave a try to the software Samkey, they have an option to change your csc in a multicsc firmware. For example, I wanted the PCT csc code because is from Puerto Rico(my country) and I knew that Samsung Pay worked with it, so I flashed the firmware N975FXXU1ASH5 with multi-csc OWA N975FOWA1ASH5 because one of the csc is the one I wanted. The default csc in this firmware is CHL from chile(Samsung Pay dont support this country), next I buy 3 credits for Samkey on ebay for $6 and use the option to change the CSC and it worked. Do not needed to factory reset or delete any data. Also the phone do a OTA update and still have the PCT csc code. Hope this help someone.
Click to expand...
Click to collapse
Can you post a link to that
ekerbuddyeker said:
Can you post a link to that
Click to expand...
Click to collapse
The seller was https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/254275758975
The software is in http://www.samkey.org/download.html
The seller gives you one account with minimum 3 credits, but you only have to use 2 credits
Sent from my SM-N975F using Tapatalk
AlEjAnDrO812 said:
Hey guys I gave a try to the software Samkey, they have an option to change your csc in a multicsc firmware. For example, I wanted the PCT csc code because is from Puerto Rico(my country) and I knew that Samsung Pay worked with it, so I flashed the firmware N975FXXU1ASH5 with multi-csc OWA N975FOWA1ASH5 because one of the csc is the one I wanted. The default csc in this firmware is CHL from chile(Samsung Pay dont support this country), next I buy 3 credits for Samkey on ebay for $6 and use the option to change the CSC and it worked. Do not needed to factory reset or delete any data. Also the phone do a OTA update and still have the PCT csc code. Hope this help someone.
Click to expand...
Click to collapse
Good info i am on PR how you change the csc flashing something or not?
Sent from my GM1917 using Tapatalk
x.Orville.x said:
Good info i am on PR how you change the csc flashing something or not?
Sent from my GM1917 using Tapatalk
Click to expand...
Click to collapse
I don't see the notification of the quote sorry for the late response, just need to flash a firmware with the CSC code you want then use the software I mentioned.
Sent from my SM-N975F using Tapatalk
AlEjAnDrO812 said:
Sure, I have the SM-N975F model and I use the firmaware N975FXXU1ASHE from Spain, the CSC is PHE also read that the Italy CSC works.
Click to expand...
Click to collapse
In case that your actual country of residence is different from the CSC you are using, have you tried adding your bank's debit card to Samsung Pay?
My CSC is Hong Kong and I can add Canadian credit cards but not debit cards. I was interested to know if this is the case across the board.
Is anyone else here still able to use MST payments while using a variant not meant for their home country?
For the past month or two, my SM-N9750 (Hong Kong) will not work with MST here in Canada. Prior to that, I would use MST every week, especially with my SM-G9650 (S9+, Hong Kong).
Any feedback would be greatly appreciated!
Samsung Pay works out of the box for both my dual sim Note 10+ and S10+. Both are from the UAE (XSG). Im using it with a USA card. However, there will be no USA points & promotions. , which are showing UAE promotions.
bimmerboii said:
Samsung Pay works out of the box for both my dual sim Note 10+ and S10+. Both are from the UAE (XSG). Im using it with a USA card. However, there will be no USA points & promotions. , which are showing UAE promotions.
Click to expand...
Click to collapse
Did you try doing any MST transactions (lately) on terminals that don't support tap-to-pay?
waqqas.khokhar said:
Did you try doing any MST transactions (lately) on terminals that don't support tap-to-pay?
Click to expand...
Click to collapse
90% of my transactions are MST. It works in all of them.
Does anyone know how to correctly change CSC on the Canadian N975W? I purchased a used Note 10+ that the previous user bought from Samsung direct but had a Bell sim so the CSC shows BMC and has bell bloatware. I'm trying to change it to KDO but no luck with any firmwares yet. Any ideas or steps I'm missing?
Tried both KDO and XAC firmware but the file names seem that they're the exact same from both updato and SamFirm.
Using patched odin and everything loads fine - using CSC not the Home CSC.
?
Sent from my SM-N976V using Tapatalk
Trying to switch CSC and it won't change through normal method.
pearse said:
Trying to switch CSC and it won't change through normal method.
Click to expand...
Click to collapse
it should change depending on sim inserted as long as it contains the csc on the device.
you can use phone info or similar to see available csc.
you can also try *#272*IMEI#
Domt think itll help but i believe you could also install U and U1 firmwares to ur W variant. Maybe trying the U1 will help
hello all
plz i have an important question
Could I install firmware SM-N975U1 to my note unlocked from Canada model SM-N975W ??? same hardware
georgeelbob said:
hello all
plz i have an important question
Could I install firmware SM-N975U1 to my note unlocked from Canada model SM-N975W ??? same hardware
Click to expand...
Click to collapse
Maybe if u ask in a few more threads someone will finally answer u..
Or u can just try it
Only in the same muti-csc rom can change
Go to http://www.samkey.org/ to buy SamKey CodeReader – 15 points is $ 45 USD, and there are split sales on some trading platforms for about 3 points $ 6.6 This is what you want to do
Download the SamKey program on its website, and download the driver together if necessary
p40403 said:
Only in the same muti-csc rom can change
Go to http://www.samkey.org/ to buy SamKey CodeReader – 15 points is $ 45 USD, and there are split sales on some trading platforms for about 3 points $ 6.6 This is what you want to do
Download the SamKey program on its website, and download the driver together if necessary
Click to expand...
Click to collapse
Or just pay for chimera..at least it can change csc on g975u now